Cres Cor H135UA11 240, H135SUA11 240 Hot Cabinet Operating and Maintenance Instructions

Cres Cor H135UA11 240, H135SUA11 240 Hot Cabinet Operating and Maintenance Instructions

Below you will find brief information for Hot Cabinet H135UA11, Hot Cabinet H135SUA11, Hot Cabinet H135UA11240, Hot Cabinet H135SUA11240. These hot cabinets are designed to keep food warm and at safe temperatures. They feature a thermostat to control the temperature, a thermometer to display the internal temperature, and a power switch for easy on/off control. The cabinets can be used to hold food for extended periods, ensuring that it remains safe to eat.

advertisement

Assistant Bot

Need help? Our chatbot has already read the manual and is ready to assist you. Feel free to ask any questions about the device, but providing details will make the conversation more productive.

Hot Cabinet H135UA11, H135SUA11, H135UA11240, H135SUA11240 Operating and Maintenance Instructions | Manualzz
Hot Cabinets
FL-2328
Rev. 4 (3/13)
Page 1 of 4
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
H135UA11 Hot Cabinet (Aluminum)
H135SUA11 Hot Cabinet (Stainless Steel)
Model No.
Volts
Watts
Amps
Hertz
Phase
NEMA
H135UA11
H135SUA11
120
1500
12.3
60
1
5-15P
H135UA11240
H135SUA11240
240
1500
6.1
60
1
6-15P
All are designed for AC service. The above model numbers may be followed by “M”, “L”, “D”, “R” and ending
with “S” or “Z”.
CONTROL PANEL PARTS IDENTIFICATION
1. Power Switch
2. Yellow Light-Power
3. Thermostat
4. Thermometer
HOW TO INSTALL UNIT:
1. Place cabinet near warm ovens. Do NOT put in
drafty areas or near ventilating systems.
2. Plug cord end into proper wall outlet.
HOW TO START UNIT:
1. Turn the POWER switch on. The yellow light will
turn on.
2. Turn thermostat to #10.
3. Preheat cabinet for 30 minutes.
4. Put food into cabinet.
5. Turn thermostat to #8 and close door.
NOTE: No. 8 setting = approx. 190°F (88°C)
No. 6 setting = approx. 165°F (74°C)
Proper food holding temperature is 140°F (60°C) or
higher. The thermometer shows the temperature inside.
TO TURN OFF UNIT:
1. Turn thermostat off.
2. Turn the POWER switch off.
3. The yellow light will go out.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Hot Cabinets
FL-2328
Rev. 4 (3/13)
Page 2 of 4
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
H135UA11 Hot Cabinet (Aluminum)
H135SUA11 Hot Cabinet (Stainless Steel)
MAINTENANCE
WARNING
HOT UNIT REMOVAL INSTRUCTIONS:
1. Unplug power cord from wall outlet.
2. Pull entire unit out the front of the cabinet.
RISK OF FIRE OR ELECTRIC SHOCK
DO NOT OPEN
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REPAIR SHOULD BE DONE BY AUTHORIZED SERVICE
PERSONNEL ONLY
HOW TO CLEAN THE CABINET:
WARNING
BEFORE cleaning
the cabinet:
2.Remove Hot unit from cabinet.
3.Do NOT use abrasives or harsh
chemicals.
Soil
DOORS
Vinyl (Out)
Aluminum (In)
Dirt, Grease and Oil
Dirt
CABINETS
(H137UA11 is
Aluminum)
(H137SUA11 is
Stainless Steel)
Fingerprints, Grease
and Oil
Water Spots
1. Wipe up spills as soon as possible.
2. Clean cabinet regularly to avoid heavy dirt build-up.
1.Allow cabinet to cool.
HOW TO CLEAN UNIT:
Cleaning Notes:
3. Make a test spot with cleaner.
4. Follow manufacturer’s directions on cleaner.
5. Do not mix cleaners.
6. Avoid drips and splashes.
Cleaner
Method
Mild Detergent* and
water.
1. Wipe with soft, damp cloth.
2. Rinse well.
Mild detergent* and hot
water, or mild abrasive
cleaner.
Steam (No strong alkaline
additive)
Chemical oven cleaner
for cabinet material
Mild abrasive cleaner; oily
or waxy cleaner
Mild abrasive cleaner.
Oily of waxy cleaner.
1. Use soft, damp cloth.
2. Rinse with hot water.
3. Wipe dry.
1. Rinse after steam cleaning.
2. Wipe dry.
Follow oven manufacturer’s directions
Apply with clean, soft cloth. Wipe with
damp cloth.
Apply with soft, clean cloth.
Wipe with damp cloth.
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Hot Cabinets
FL-2328
Rev. 4 (3/13)
Page 3 of 4
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
H135UA11 Hot Cabinet (Aluminum)
H135SUA11 Hot Cabinet (Stainless Steel)
TROUBLE-SHOOTING CHART:
FAILURE
1. Yellow light at switch does NOT light.
2. Unit does not heat.
3. Unit gets too hot or won’t shut off.
4. Blower does not work or makes noise.
POSSIBLE CAUSE
1a. Circuit breaker/fuse to wall outlet is blown.
1b. Cord is unplugged from wall outlet.
1c. Switch is “OFF”.
2a. Thermostat set too low or is “OFF”.
2b. Switch is “OFF”.
3a. Defective electrical parts. UNPLUG UNIT FROM
WALL OUTLET.
4a. Defective blower.
NOTE: Optional digital thermometer will flash if cabinet temperature is below 140° F or above 250° F.
Call the factory if you need different settings.
If cause is none of the above, refer to our list of Authorized Service Centers, FL-1400.
REPLACEMENT PARTS:
DESCRIPTION
Hot Unit (H35UA11)
Hot Unit (H135SUA11)
Blower Kit
Heater Kit
Thermostat Kit
Thermometer Kit (Analog)
Power Cord
Power Switch
Power Light
Terminal Block
CABINET
Door Assembly, Aluminum
Door Assembly, Red
Door Assembly, Stainless Steel
Door Gasket
Door Latch
Door Hinge
Pan Slides
120 VOLT
HU-1254-058
HU-1254-062
0769-180-K
0811-019-K
0848-062-K
5238-030-K
0810-029
0808-116-K
0766-094
0852-091
240 VOLT
HU-1254-059
HU-1254-063
0769-182-K
0811-020-K
0848-062-K
5238-030-K
0810-039
0808-116-K
0766-095
0852-091
W/BLACK FRAME
1200-495-BL-K
1200-499-BL-K
0861-259-K
1006-154-01-K
0519-104-K
0621-281-K
W/O BLACK FRAME
1221-571-K
1221-571-RK
1221-571-SS
0861-271-K
1006-154-01-K
0519-104-K
0621-281-K
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com
Hot Cabinets
FL-2328
Rev. 4 (3/13)
Page 4 of 4
5925 Heisley Road • Mentor, OH 44060-1833
OPERATING and MAINTENANCE INSTRUCTIONS
H135UA11 Hot Cabinet (Aluminum)
H135SUA11 Hot Cabinet (Stainless Steel)
WIRING DIAGRAM:
Call Toll-free: 877-CRES COR (273-7267) • Fax: 800-822-0393 • www.crescor.com

advertisement

Key Features

  • Thermostat control
  • Built-in thermometer
  • Power switch
  • Temperature settings
  • Aluminum or stainless steel construction
  • Easy installation
  • Simple maintenance
  • Safe food holding

Frequently Answers and Questions

What is the proper food holding temperature?
The proper food holding temperature is 140°F (60°C) or higher.
How do I clean the hot cabinet?
Clean the cabinet regularly to avoid heavy dirt build-up. Use a mild detergent and water to clean the doors and cabinets. Avoid using abrasives or harsh chemicals.
What should I do if the yellow light does not light?
Check if the circuit breaker/fuse to the wall outlet is blown, if the cord is unplugged from the wall outlet, or if the switch is off.

Related manuals

Download PDF

advertisement