GaN High Power Outdoor

GaN High Power Outdoor
High Power Outdoor
GaN Solid State Power Amplifiers
Teledyne Paradise Datacom’s newly packaged High Power
Outdoor (H) series of Solid State Power Amplifiers is packaged
with the latest Gallium Nitride, GaN, based SSPA modules.
Utilizing the latest in linearized GaN amplifier module technology, the High Power Outdoor enclosure can achieve the highest
power densities in the industry. By utilizing an all GaN semiconductor design along with proprietary linearization techniques, the
High Power Outdoor amplifier simultaneously provides excellent
linear output power along with industry leading efficiency.
The key advantages of GaN technology include:
• Higher Linear Output Power Levels
• Higher Reliability
• Greater Efficiency
A robust thermal platform and mechanical design make the High
Power Outdoor package one of the most reliable outdoor high
power amplifiers, HPA. Teledyne Paradise Datacom outdoor
amplifiers are designed and tested to many of the MIL-STD-810
environmental conditions.
All Teledyne Paradise Datacom SSPAs have a full complement
of local and remote control capability. The remote control capabilities include: RS485/RS232 serial control, Ethernet including
SNMP, UDP, and internal web browsing. Discrete hardware
control, Form C contact alarms and opto isolated inputs are also
included.
Teledyne Paradise Datacom LLC
328 Innovation Blvd., Suite 100
State College, PA 16803
Tel: (814) 238-3450
Fax: (814) 238-3829
1 OF 8
www.paradisedata.com
FEATURES
• Extremely High Power
Density:
to 1.0 kW S-Band
to 800 W X-Band
to 800 W C-Band
to 500 W Ku-Band
• RF Output Sample Port
• Remote Communication
via RS232/485 or Ethernet
• 20 dB Gain Adjustment
• Built-in 1:1 Redundancy
Control with ‘Cold’ Standby
capability
• Built-in Maintenance
Switch Controller
OPTIONS
• Hand Held Controller
• RF Input Sample Port
• L-Band Input operation
• Reflected Power Monitor
• Phase Combined Systems
• Antenna Mounting Kit
SPECIFICATIONS
• Dimensions & Weight:
16.5 x 27.5 x 9.335 in.
419 x 699 x 238 mm
95.0 lbs. / 43.2 kg
Teledyne Paradise Datacom Ltd.
2&3 The Matchyns, London Road, Rivenhall End
Witham, Essex CM8 3HA United Kingdom
Tel: +44(0) 1376 515636
Fax: +44(0) 1376 533764
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
S-Band Output Power Levels
PARAMETER
Frequency Range
Output Power
Typical, Psat
Guaranteed minimum, PLinear 1
Prime Input Power
Line Frequency
Line Power (Voltage)
(typical @ 220 VAC)
Receive Band Noise Power Density
NOTES
LIMITS
UNITS
Frequency selection “G”
Frequency selection “A”
Frequency selection “B”
1.750 to 2.120
2.020 to 2.120
2.200 to 2.300
GHz
GHz
GHz
HPAS2600AHXXXXXG
HPAS2800AHXXXXXG
HPAS210KAHXXXXXG
Psat / PLinear
58.0 (600) / 55.0 (300)
59.0 (800) / 56.0 (400)
60.0 (1000) / 57.0 (500)
dBm (W)
dBm (W)
dBm (W)
Power factor corrected
HPAS2600_HXXXXXG
HPAS2800_HXXXXXG
HPAS210K_HXXXXXG
> 0.9
47– 63
Psat / PLinear
2200 / 1700 (90-265)
2500 / 2000 (90-265)
4000 / 3500 (180-265)
W (VAC)
W (VAC)
W (VAC)
without optional filter
with optional filter
- 95
- 155
dBW / 4 KHz
dBW / 4 KHz
Hz
Note 1: PLinear = maximum output power at which third order intermodulation products < -25 dBc (for two tones separated by 5 MHz) or spectral regrowth on a single QPSK at 1.5 x symbol rate or OQPSK at 1.0 x symbol rate is < -30 dBc .
C-Band Output Power Levels
PARAMETER
Frequency Range
Output Power
Typical, Psat
Guaranteed minimum, PLinear 1
Power Requirements
Line Frequency
Line Power (Voltage)
(typical @ 220 VAC)
Receive Band Noise Power Density
NOTES
LIMITS
UNITS
Frequency selection “L”
Frequency selection “H”
Frequency selection “C” 2
Frequency selection “A”
Frequency selection “B” 2
Frequency selection “D”
4.400 to 5.000
5.715 to 5.790
5.750 to 6.670
5.850 to 6.425
5.850 to 6.725
6.425 to 7.025
GHz
GHz
GHz
GHz
GHz
GHz
HPAC2650AHXXXXXG
HPAC2800AHXXXXXG
Power Factor corrected
Autoranging
Psat / PLinear
58.1 (650) / 55.1 (325)
59.0 (800) / 56.0 (400)
dBm (W)
dBm (W)
HPAC2650_HXXXXXG
HPAC2800_HXXXXXG
> 0.9
47 - 63
Psat / PLinear
3300 / 2800 (90-265)
4000 / 3500 (180-265)
W (VAC)
W (VAC)
without filter
- 155
dBW / 4 KHz
Hz
Note 1: PLinear = maximum output power at which third order intermodulation products < -25 dBc (for two tones separated by 5 MHz) or spectral regrowth on a single QPSK at 1.5 x symbol rate or OQPSK at 1.0 x symbol rate is < -30 dBc.
Note 2: Output power decreases over the extended portion of the frequency range. Both Psat and PLinear de-rate by 1 dB from 5.85 to 5.75
GHz and from 6.425 to 6.725 GHz.
2 OF 8
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
X-Band Output Power Levels
PARAMETER
Frequency Range
Output Power
Typical, Psat
Guaranteed minimum, PLinear 1
Power Requirements
Line Frequency
Line Power (Voltage)
(typical @ 220 VAC)
Receive Band Noise Power Density
NOTES
LIMITS
UNITS
Frequency selection “F”
Frequency selection “D”
Frequency selection “A”
7.10 to 7.40
7.70 to 8.40
7.90 to 8.40
GHz
GHz
GHz
HPAX2650AHXXXXXG
HPAX2800AHXXXXXG
Psat / PLinear
58.1 (650) / 55.1 (325)
59.0 (800) / 56.0 (400)
dBm (W)
dBm (W)
Power Factor corrected
Autoranging
HPAX2650_HXXXXXG
HPAX2800_HXXXXXG
> 0.94
47 - 63
Psat / PLinear
3300 / 2800 (90-265)
4000 / 3500 (180-265)
W (VAC)
W (VAC)
without optional filter
with optional filter
- 85
- 155
dBW / 4 KHz
dBW / 4 KHz
Hz
Note 1: PLinear = maximum output power at which third order intermodulation products < -25 dBc (for two tones separated by 5 MHz) or spectral regrowth on a single QPSK at 1.5 x symbol rate or OQPSK at 1.0 x symbol rate is < -30 dBc .
Ku-Band Output Power Levels
PARAMETER
Frequency Range
Output Power
Typical, Psat
Guaranteed minimum, PLinear 1
Power Requirements
Line Frequency
Line Power (Voltage)
(typical @ 220 VAC)
Receive Band Noise Power Density2
NOTES
LIMITS
UNITS
Frequency selection “F”
Frequency selection “B”
Frequency selection “A”
Frequency selection “C”
Frequency selection “G”
Frequency selection “D”
12.75 to 13.25
13.75 to 14.50
14.00 to 14.50
14.50 to 14.70
14.75 to 15.25
15.10 to 15.40
GHz
GHz
GHz
GHz
GHz
GHz
HPAK2300AHXXXXXG
HPAK2400AHXXXXXG
HPAK2500AHXXXXXG
Psat / PLinear
54.8 (300) / 51.8 (150)
56.0 (400) / 53.0 (200)
57.0 (500) / 54.0 (250)
dBm (W)
dBm (W)
dBm (W)
Power Factor corrected
Auto ranging
HPAK2300_HXXXXXG
HPAK2400_HXXXXXG
HPAK2500_HXXXXXG
> 0.94
47 - 63
Psat / PLinear
2000 / 1500 (90-265)
2500 / 1700 (90-265)
3000 / 2000 (90-265)
W (VAC)
W (VAC)
W (VAC)
with optional filter
- 155
dBW / 4 KHz
Hz
Note 1: PLinear = maximum output power at which third order intermodulation products < -25 dBc (for two tones separated by 5 MHz) or spectral regrowth on a single QPSK at 1.5 x symbol rate or OQPSK at 1.0 x symbol rate is < -30 dBc .
Note 2: All Ku-Band SSPAs are fitted with a receive band reject bulkhead filter, standard. An optional pressure window is available.
3 OF 8
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
Electrical Specifications
PARAMETER
Gain
Gain Flatness
Gain Slope
Gain Variation vs. Temperature
Gain Stability
Gain Adjustment
Intermodulation Distortion
(Two-tone, 5 MHz spacing)
AM/PM Conversion
Spurious
Harmonics (SSPA only)
NOTES
LIMITS
UNITS
range
full band
Extended C-Band units
full band (S-Band)
per 40 MHz (C-,X-,Ku-bands)
per 10 MHz (S-band)
-40°C to +60°C
at constant temperature
0.1 dB resolution
55-75
± 1.0
± 1.5
± 0.75
± 0.3
± 0.2
± 1.5
± 0.25
20
dB
dB
dB
dB
dB/40 MHz
dB/10 MHz
dB
dB/24 hours
dB
At PLinear (Psat - 3 dB)
-25
dBc
@ rated PLinear
≤ 1.0
@ rated PLinear
@ rated PLinear
@ rated PLinear (S-Band)
-65
-50
-30
Extended C-Band
Output VSWR: Ku-Band with bulkhead filter
1.30:1
1.50:1
1.40:1
at maximum gain
at maximum gain (S-Band)
10
8
dB
dB
Linear
Parabolic
Ripple
0.01
0.003
1.0
ns/MHz
ns/MHz2
ns p-p
Input/Output VSWR
Noise Figure
Group Delay
(per 40 MHz segment)
TX Band Noise Output Power Density
o
/dB
dBc
dBc
dBc
TX Band
-75
dBW/4 KHz
Offset frequency from carrier
1 Hz
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
1 MHz
-110
-120
-130
-135
-140
-140
-140
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Offset frequency from carrier
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
1 MHz
-90
-100
-110
-120
-125
-130
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
Range
Accuracy
Psat to (Psat - 20)
± 0.5
dB
dBm
16.5 X 27.5 X 9.335
419 X 699 X 238
inches
mm
Weight
95 (43.2)
lbs. (kg)
Finish
powder coat
white
-40 to +60
°C
Condensing
100
%
Integrated
Forced air
With connectors properly sealed
IP54
Residual AM Noise, typical
Residual Phase Noise, typical
(SSPA only)
True RF Power Detector
Mechanical & Environmental Specifications
Size
Operating Temperature
Relative Humidity
Cooling System
Ingress Protection Rating
Altitude
width X length X height
Ambient
No temperature de-rating up to 10,000 ft. (3,000 m)
De-rate maximum temperature by 2 °C per 1,000 ft (300 m) beyond 10,000 ft.
Shock
50 g p-p, 11 msec pulses
Vibration
3g rms 30 min. 5-2000 Hz
4 OF 8
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
L-Band Operation
Teledyne Paradise Datacom amplifiers are available with an integrated L-Band Block Up
Converter. L-Band units utilize Teledyne Paradise Datacom’s proprietary zBUC technology.
The addition of a zBUC® converter to the SSPA typically increases the gain by 2-4 dB. The
advantages of zBUC technology include:
• zBUC converter can detect and switch to an extenally supplied reference.
• Optional internal high stability (10MHz) reference.
• zBUC converter can lock to an externally supplied reference of 10 or 50 MHz.
• zBUC converter can accept a wide range of external reference power (-10 to +5 dBm)
• zBUC converter can accept FSK monitor and control signal via the IFL for complete
amplifer remote control.
Available Frequency Plans
Band
Frequency Band
IF Input
LO Frequency
RF Output
Gain Change
C
Standard C-Band
950 - 1525 MHz
4.900 GHz
5.850 - 6.425 GHz
0-4 dB
C
Extended C-Band
950 - 1825 MHz
4.900 GHz
5.850 - 6.725 GHz
0-4 dB
C
Palapa Band
950 - 1250 MHz
5.475 GHz
6.425 - 6.725 GHz
0-4 dB
C
Insat Band
950 - 1250 MHz
5.775 GHz
6.725 - 7.025 GHz
0-4 dB
C
Extended C-Band 2
950 - 1675 MHz
4.800 GHz
5.750 - 6.475 GHz
0-4 dB
C
Low C-Band
840 - 1000 MHz
4.250 GHz
5.090 - 5.250 GHz
0-4 dB
X
Standard X-Band
950 - 1450 MHz
6.950 GHz
7.900 - 8.400 GHz
0-2 dB
Ku
Standard Ku-Band
950 - 1450 MHz
13.050 GHz
14.00 - 14.50 GHz
0-2 dB
Ku
Extended Ku-Band
950 - 1700 MHz
12.800 GHz
13.75 - 14.50 GHz
0-2 dB
Electrical Specifications for High Power Outdoor SSPA with ZBUC converter
PARAMETER
Gain
Gain Flatness
Gain Slope
Gain Adjusted Range
Gain Stability
Phase Noise
Spurious
NOTES
LIMITS
UNITS
Nominal setting
full band (C-,X-,Ku-bands)
per 40 MHz (C-,X-,Ku-bands)
75
± 2.0
± 0.5
20
60 - 80
57 - 77
± 1.5
dB
dB
dB/40 MHz
dB
dB
dB
dB
Typical C-Band Adj. Range
Typical Ku-Band Adj. Range
-40 to +60 °C
Offset frequency from carrier
10 Hz
100 Hz
1 KHz
10 KHz
100 KHz
1 MHz
Absolute max.
-30
-60
-70
-80
-90
-90
C-band (typ.)
-60
-80
-80
-85
-120
-125
In-Band Signal Related (C-/Ku-Band)
(Extended C-Band)
Close to Carrier Spurious (≤ 20 MHz)
Local Oscillator
X-band (typ.)
-60
-75
-75
-100
-110
-122
Ku-band (typ.)
-50
-65
-72
-90
-110
-120
-50
-40
-50
-30
dBc
dBc
dBc
dBm
dB
Noise Figure
At 75 dB gain setting
20
Input VSWR
L-Band
1.5 : 1
Reference Accuracy (initial)
Aging per day (after 30 days)
Aging per year (after 30 days)
Reference Stability over Temperature (-40 to +40 °C, ambient)
± 1 • 10-8
± 1 • 10-9
± 6 • 10-8
± 1 • 10-8
Internal Reference Option
5 OF 8
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
dBc/Hz
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
Outline Drawing, Ku-Band High Power Outdoor SSPA (typical)
6 OF 8
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
Optional Accessory
Universal Handheld Controller (RCH-1000)
The Universal Handheld Controller (RCH-1000) is a versatile device used to interface with a
variety of Teledyne Paradise Datacom amplifiers, including Compact Outdoor SSPA, Mini
Compact Outdoor SSPA, or H-Series High Power Outdoor SSPA. Reference specification
sheet 211667.
The device is housed in a ruggedized
enclosure that is environmentally sealed to
IP65 levels. This allows the Universal
Handheld Controller (RCH-1000) to be used
in most outdoor environments. The rugged
construction of the device enclosure provides protection from impact and vibration.
This device allows the operator to adjust the
attenuation of the connected unit, and control the mute/unmute selection, as well as monitor
the status, conditions and settings of the connected unit via a serial RS-485 connection. Fault
conditions and other events are tracked in the controller’s internal log.
Receive Band Filter Options
X-Band GaN amplifiers may be ordered with an external receive band reject filter. The filter
used for frequency band 7.90 - 8.40 GHZ is model L205250-X6-TX.
Consult the factory for S-Band Receive Band Reject Filters.
7 OF 8
211669 REV L ECO 18095
High Power Outdoor
GaN Solid State Power Amplifiers
Part Number Configuration Matrix
HPA C 2 8 0 0 A H M X S X X G
Band
S-Band
C-Band
X-Band
Ku-Band
S
C
X
K
GaN Device Designator
G GaN Device
Generation
Second 2
Configuration Modifier 3
X None (Standard)
Power Level (Watts)
S-Band 600, 800, 1000 (10K)
C-Band 650, 800
X-Band 650, 800
Ku-Band 300, 400, 500
Configuration Modifier 2
Standard
Receive Band Reject Filter
Reflected Power Monitor
Waveguide Pressure Window
R + V (see above)
V + W (see above)
X
R1
V
W2
Y1
Z2
Frequency Sub Band
A
B
G
1
S-Band
2.02 to 2.12 GHz
2.20 to 2.30 GHz
1.75 to 2.12 GHz
2
Configuration Modifier 1
X Standard
S Input Sample Port
C-Band
1
A
B1
C
D1
H
L
A1
D
F
A1
B1
C1
D1
F1
G1
1
5.850 to 6.425 GHz
5.850 to 6.725 GHz
5.750 to 6.670 GHz
6.425 to 7.025 GHz
5.715 to 5.790 GHz
4.400 to 5.000 GHz
X-Band
7.90 to 8.40 GHz
7.70 to 8.40 GHz
7.10 to 7.40 GHz
Ku-Band
14.00 to 14.50 GHz
13.75 to 14.50 GHz
14.50 to 14.70 GHz
15.10 to 15.40 GHz
12.75 to 13.25 GHz
14.75 to 15.25 GHz
S-Band and X-Band units only
Ku-Band standalone units only
System Configuration
X Standalone amplifier
Block Up Converter
M Internal Reference BUC
P External Reference BUC
X No BUC
H
Package
Standalone amplifier
Example - A standalone 800W GaN C-Band High Power Outdoor SSPA an
optional input sample port and optional internal reference block up converter
is part number: HPAC2800AHMXSXXG.
Available with optional BUC
AnAn
optional
mounting
optional
uni-strutkit
is
available.
mounting kit is available.
Use and Disclosure of Data
The information contained herein is classified as EAR99 under the U.S. Export Administration Regulations. Export, re-export or diversion
contrary to U.S. law is prohibited.
Specifications are subject to change without notice.
8 OF 8
211669 REV L ECO 18095
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement