600TV Lines

Super High

Resolution

Color Camera

3-AXIS PLASTIC DOME CAMERA

3-AXIS INFRARED - LED PLASTIC

DOME CAMERA

Please read this manual thoroughly before use, and keep it handy for future reference.

Design and specifications are subject to change without notice.

WARNINGS AND CAUTIONS:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR

MOISTURE. DO NOT INSERT ANY METALLIC OBJECTS THROUGH THE VENTILATION GRILLS OR

OTHER OPENINGS ON THE EQUIPMENT.

CAUTION:

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER(OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

EXPLANATION OF GRAPHICAL SYMBOLS

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.

PRECAUTIONS

Installation -----------------------------------

Do not install the unit in an extremely hot or humid place or in a place subject to excessive dust, mechanical vibration.

Cleaning --------------------------------------

Clean the unit with a slightly damp soft cloth.

Use a mild household detergent. Never use strong solvents such as thinner or benzine as they might damage the finish of the unit.

Retain the original carton and packing materials for safe transport of this unit in the future.

- ii -

FCC COMPLIANCE STATEMENT

FCC INFORMATION :

THIS EQUIPMENT HAS BEEN TESTED

AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS A DIGITAL

DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE

LIMITS ARE DESIGNED TO PROVIDE REASONABLE PROTECTION

AGAINST HARMFUL INTERFERENCE WHEN THE EQUIPMENT IS

OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT

GENERATES, USES, AND CAN RADIATE RADIO FREQUENCY

ENERGY AND IF NOT INSTALLED AND USED IN ACCORDANCE WITH

THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE

TO RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN

A RESIDENTIAL AREA IS LIKELY TO CAUSE HARMFUL

INTERFERENCE IN WHICH CASE THE USER WILL BE REQUIRED TO

CORRECT THE INTERFERENCE AT HIS OWN EXPENSE.

CAUTION :

CHANGES OR MODIFICATIONS NOT EXPRESSLY

APPROVED BY THE PARTY RESPONSIBLE FOR COMPLIANCE

COULD VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT.

THIS CLASS A DIGITAL APPARATUS COMPLIES WITH CANADIAN

ICES-003.

NORME NMB-003 DU CANADA.

CE COMPLIANCE STATEMENT

WARNING

THIS IS A CLASS A PRODUCT. IN A DOMESTIC ENVIRONMENT THIS

PRODUCT MAY CAUSE RADIO INTERFERENCE IN WHICH CASE

THE USER MAY BE REQUIRED TO TAKE ADEQUATE MEASURES.

- iii -

IMPORTANT SAFEGUARDS

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4 . Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the

manufacturer's instructions.

8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the other.

A grounding type plug has two blades and a third grounding prong.

The wide blade or the third prong are provided for your safety. If the

provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they exit from

the apparatus.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket,

or table specified by the manufacturer,

or sold with the apparatus.

When a cart is used,use caution when moving

the cart/apparatus combination to avoid injury

from tip-over.

13. Unplug this apparatus during lightning storms or when unused for

long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is

required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been moisture, does

not operate normally, or has been dropped.

15. CAUTION THESE SERVICING INSTRUCTIONS ARE FOR USE BY

QUALIFIED SERVICE PERSONNEL ONLY. TO REDUCE THE RISK

OF ELECTRIC SHOCK DO NOT PERFORM ANY SERVICING OTHER

THAN THAT CONTAINED IN THE OPERATING INSTRUCTIONS

UNLESS YOU QRE QUALIFIED TO DO SO.

16. Use satisfy clause 2.5 of IEC60950-1/UL60950-1 or Certified/Listed

Class 2 power source only.

- iv -

INTRODUCTION

The camera provides high-quality images using Sony CCD technology especially designed for closed-circuit television (CCTV) and security surveillance applications.

Features:

High resolution and high performance Sony Supe r HAD

Excellent picture quality

600 lines(Color) of resolution

0.1 lux(Color), 0.04lux(B/W) @ F1.2 50IRE Sensitivity

Technology

0.1 lux(Color), 0 lux(B/W, IR LED ON) @

F1.2 50IRE Sensitivity

(

IR CAMERA ONLY)

Auto electronic shutter [1/60(1/50) ~ 1/100,000] and manual electronic shutter modes

OSD (On Screen Display)

Auto and manual white balance modes

DWDR

OSD Font Color (16 Color)

BLC (Back Light Compensation)

Smart IR (IR CAMERA ONLY)

30EA, 850mm IR LED ( IR CAMERA ONLY)

Day&Night (Auto / DAY / NIGHT / EXT)

Private Mask (8 position, 16 Colors)

AGC (Auto Gain Control)

MIRROR (ON/OFF)

VIDEO OUT BNC

Motion Detection(4 point)

HLC (High Light Compensation)

DPC (Dead Pixel Cancellation)

2.8~12 mm A/I Varifocal Lens F1.2 (D&N Lens option)

Operates in AC24V +/- 10% / DC12V +/- 10%

Use Certified / Listed Class 2 power source only

Test monitor Output

Camera Mount : camera mount directly to the wall or ceiling

IMPORTANT : The user of this camera is responsible for checking and complying with local, state, and federal laws and statutes concerning the recording and monitoring of audio signals.

1

CAMERA CONNECTIONS

New female RJ-11

Connector is to be used

- +

New power connector attached to new RJ-11 cable adapter

1

2 3

Standard BNC connection

1. Lens : 2.8~12mm A/I Vari-focal lens for wide area monitoring.

(D&N with ICR model option)

2. Power : 24V AC input / 12V DC input

power source from a DC 12V or AC 24V ac +/-10% 60/50Hz +/-1Hz

Use Certified/Listed Class 2 power source only.

*If using DC 12V power adaptor,

use a power supply capable of supplying 5 Watts. (IR model 7Watts)

3. Video : BNC connector used to connect the camera to a monitor, switcher, etc.

CONTENTS of PACKAGE

The package contains the following.

1. Camera in Housing

2. Instruction Manual (This Document)

3. Accessory Kit for Installing

4.

5.

Drilling guide label

RJ11 to BNC/Power cable adaptor

6. 60ft RJ11 cable

7. Test monitor cable

1

1

1

1

1

1

1

REMINDER:

Never aim the camera directly into the sun.

2

STRUCTURE OF THE SETUP MENU

<SETUP>

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

<LENS>

DC

MANUAL

<EXPOSURE>

SHUTTER

BRIGHTNESS

AGC

DWDR

RETURN

<WHITE BAL>

ATW1

ATW2

AWC -> SET

MANUAL

<BACKLIGHT>

OFF

BLC

HLC

<DAY NIGHT>

AUTO

COLOR

B/W

EXT

<DPC>

COVER THE LENS

THEN

PRESS ENTER KEY

<SPECIAL>

CAM TITLE

MOTION

PRIVACY

PARK.LINE

LANGUAGE

RETURN

7

<IMAGE ADJUST>

LENS SHAD.

2 DNR

MIRROR

FONT COLOR

CONTRAST

SHARPNESS

DISPLAY

NEG.IMAGE

RETURN

<RESET>

FACTORY

RETURN

LENS (Selection)

This function is used to adjust the brightness of the screen.

1. When the SETUP menu is displayed on the screen, please position the arrow to point to

'LENS' by using the UP and DOWN buttons.

2. Please select the type of the lens you wish to use by pressing the LEFT or RIGHT button.

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

MANUAL

ATW1

OFF

AUTO

Note The brightness of the screen can be adjusted in DC mode.

EXPOSURE

The EXPOSURE menu is used to set the automatic light control method for this camera.

1) SHUTTER

Select the shutter mode.(Auto,1/60(50), FLK~ 1/100,000 sec)

Can be changed while in shutter mode.

2) BRIGHTNESS

Adjust BRIGHTNESS level (0 ~ 255)

Can be adjusted while in DC/ manual lens mode.

3) AGC

Auto gain control (OFF / LOW / MIDDLE / HIGH)

4) DWDR

Digital Wide dynamic range

OFF / ON

(Xtended Dynamic Range)

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

EXPOSURE

SHUTTER AUTO

BRIGHTNESS

IIIIIIIIIIIIIIIIII

50

AGC ----

D-WDR OFF

RETURN RET

8

WHITE BAL

The screen color can be adjusted by using the WHITE BALANCE function.

o o

1) ATW1 Set the color temperature 2500 K 10000 K o o

2) ATW2 Set the color temperature 2000 K 13000 K

3) AWC -> SET Please press the ENTER button while the camera is directed at a piece of white paper to obtain the optimum state under current illumination. if the environment including the light source is changed, you have to adjust the white balance again.

4) MANUAL Manual mode. User can change R and B Gain manually.

<WHITE BAL MANUAL MODE>

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

WHITE BAL MANUAL

►

COLOR TEMP OUTDOOR

BLUE ------------

RED ------------

RETURN RET

BACKLIGHT

1) BLC Prevents such a back light effect to secure a clear image under all

illumination environments.

Select Area 1 or Area 2 that can be adjustable.

2) HLC The HLC function improves the identification capability of subjects facing a brightly lit situation by filtering out the strength of the light.

< BACKLIGHT MODE>

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

BACKLIGHT BLC BACKLIGHT HLC

AREA SEL AREA1

AREA STARE ON

GAIN

IIIIIIIIIIIIIIIIII

042

HEIGHT

IIIIIIIIIIIIIIIIII

005

WIDTH

IIIIIIIIIIIIIIIIII

004

LEFT/RIGHT

IIIIIIIIIIIIIIIIII

005

TOP/BOTTOM

IIIIIIIIIIIIIIIIII

005

RETURN RET

LEVEL

IIIIIIIIIIIIIIIIII

200

MODE NIGHT ONLY

RETURN RET

9

DAY NIGHT

The DAY/NIGHT menu is used to configure the day and night related setting for this camera.

This camera can turn the IR(infrared)filter on or off.

Mode : AUTO / COLOR / B/W / EXT (The EXT is not operating in this mode)

<DAY NIGHT AUTO MODE>

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

DAY NIGHT AUTO

►

D -N LEVEL

IIIIIIIIIIIIIIIIII

128

D-N DELAY 5 SEC

N-D LEVEL

IIIIIIIIIIIIIIIIII

003

N-D DELAY 5 SEC

RETURN RET

<DAY NIGHT B/W MODE>

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

DAY NIGHT B/W

►

BURST OFF

IR SMART ON

IR LEVEL HIGH

RETURN RET

IR SMART

►

IR GAIN

IIIIIIIIIIIIIIIIII

074

HEIGHT

IIIIIIIIIIIIIIIIII

007

WIDTH

IIIIIIIIIIIIIIIIII

008

LEFT/RIGHT

IIIIIIIIIIIIIIIIII

003

TOP/BOTTOM

IIIIIIIIIIIIIIIIII

004

RETURN RET

*The IR LEVEL is not operating in DAY NIGHT B/W mode.

DPC

DPC Auto setting (Dead pixels are automatically removed)

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

DPC

►

COVER THE LENS

THEN

PRESS ENTER KEY

PROCESSING NOW

10

SPECIAL

1) CAM TITLE

A

B

C

CAM TITLE

.

←→ CLR POS END

A. CAM TITLE

B. Character Table

C. Command Line

←

: Move to left

→

: Move to right

CLR : Erase all characters

POS : Move the position of title

END : Save and End

2) MOTION

AREA SELECT Select MD area number. (AREA1 ~AREA4)

AREA STATE

Select MD ON/OFF

HEIGHT Adjust height of MD area

WIDTH Adjust width of MD area

LEFT/RIGHT Adjust the location of the MD area with boundary LEFT and RIGHT.

TOP/BOTTOM Adjust the location of the MD area with boundary TOP and BOTTOM

DEGREE Adjust sensitivity of MD area.(0~255)

VIEW When set to "on", the screen displays with pink dots.

When a motion is detected in the selected area, the pink dots

are displayed on the screen.

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

SPECIAL

►

CAM TITLE

MOTION

PRIVACY

PARK.LINE

LANGUAGE

RETURN

ON

ON

OFF

OFF

ENGLISH

RET

MOTION

►

AREA SELECT AREA1

AREA STATE ON

HEIGHT

IIIIIIIIIIIIIIIIII

4

WIDTH

IIIIIIIIIIIIIIIIII

4

LEFT/RIGHT

IIIIIIIIIIIIIIIIII

2

TOP/BOTTOM

IIIIIIIIIIIIIIIIII

2

DEGREE

IIIIIIIIIIIIIIIIII

38

VIEW

RETRURN

OFF

RET

11

3) PRIVACY

AREA SELECT

AREA STATE

Select MASK area number.(Area 1 ~ Area 8)

Select MASK ON/OFF

HEIGHT Adjust height of MASK area

WIDTH Adjust width of MASK area

LEFT/RIGHT

Adjust the location of the MASK area with boundary LEFT and RIGHT

TOP/BOTTOM

Adjust the location of the MASK area with boundary

TOP and BOTTOM.

COLOR Select MASK color. (0~15)

RETURN

<PRIVACY MODE>

►

LENS

EXPOSURE

WHITE BAL

BACKLIGHT

DAY NIGHT

DPC

SPECIAL

IMAGE ADJ

RESET

ATW1

AUTO

SPECIAL

►

CAM TITLE

MOTION

PRIVACY

PARK.LINE

LANGUAGE

RETURN

OFF

OFF

ON

OFF

ENGLISH

RET

►

PRIVACY

AREA SELECT AREA1

AREA STATE

ON

HEIGHT

IIIIIIIIIIIIIIIIII

032

WIDTH

IIIIIIIIIIIIIIIIII

032

LEFT/RIGHT

IIIIIIIIIIIIIIIIII

020

TOP/BOTTOM

IIIIIIIIIIIIIIIIII

030

COLOR

IIIIIIIIIIIIIIIIII

000

RETURN RET

4) PARK.LINE Select Parking area

SPECIAL

CAM TITLE

MOTION

PRIVACY

►

PARK.LINE

LANGUAGE

RETURN

OFF

OFF

OFF

ON

ENGLISH

RET

►

PARK

.

LINE

LT 077

LB 029

RT

RB

F

N

T

RET

122

170

013

058

009

5) LANGUAGE ENGLISH or CHINESE

6) RETURN RET

12

IMAGE ADJUST

1) LENS SHAD

Adjust Lens shading level (0~255)

2) 2DNR

Select 2DNR ON/OFF

3) MIRROR

Select MIRROR ON/OFF

4) FONT COLOR Select FONT COLOR level (0~15)

Select IDR TITLE level (0~15)

5) CONTRAST Adjust CONTRAST level (0~255)

6) SHARPNESS Adjust SHARPNESS level (0~31)

7) DISPLAY Select DISPLAY mode (CRT /LCD/USER)

8) NEG. IMAGE

Select Negative image mode ON /OFF

<IMAGE ADJUST MODE>

IMAGE ADJUST

► LENS SHAD

2DNR

MIRROR

ON

ON

OFF

FONT COLOR

CONTRAST

SHARPNESS

DISPLAY

NEG.IMAGE

RETURN

IIIIIIIIIIIIIIIIII

122

IIIIIIIIIIIIIIIIII

21

CRT

OFF

RET

►

LENS SHAD

LEVEL

IIIIIIIIIIIIIIIIII

006

RETURN RET

IMAGE ADJUST

LENS SHAD

2DNR

MIRROR

►

FONT COLOR

CONTRAST

SHARPNESS

DISPLAY

NEG.IMAGE

RETURN

ON

ON

OFF

IIIIIIIIIIIIIIIIII

122

IIIIIIIIIIIIIIIIII

21

CRT

OFF

RET

►

FONT COLOR

FONT

IIIIIIIIIIIIIIIIII

003

ID&TITLE

IIIIIIIIIIIIIIIIII

003

RETURN RET

13

IMAGE ADJUST

LENS SHAD

2DNR

MIRROR

FONT COLOR

ON

ON

OFF

CONTRAST

SHARPNESS

►

DISPLAY

NEG.IMAGE

RETURN

IIIIIIIIIIIIIIIIII

IIIIIIIIIIIIIIIIII

CRT

OFF

RET

122

21

►

CRT ADJUST

PED LEVEL

IIIIIIIIIIIIIIIIII

022

COLOR GAIN

IIIIIIIIIIIIIIIIII

192

RETURN RET

►

LCD AJUST

GAMMA 0.50

PED LEVEL

IIIIIIIIIIIIIIIIII

028

COLOR GAIN

IIIIIIIIIIIIIIIIII

160

RETURN RET

►

USER AJUST

GAMMA 0.45

PED LEVEL

IIIIIIIIIIIIIIIIII

028

COLOR GAIN

IIIIIIIIIIIIIIIIII

160

RETURN RET

RESET

1) FACTORY

EXIT

1) EXIT

Returns to the level which was set by the manufacturer for shipment.

Saves all the setting menus and then exits.

14

LENS ADJUSTMENT

(OPTIONAL VARIFOCAL LENS)

Field of view: Adjust setting from Tele (T) to Wide (W) field of View.

Focus: Adjust lens focus from near

(N) to infinity ( ).

Adjust Focus

Adjust Angular Field View

DC AUTO IRIS LENS

2.8-12mm

Focal Length

Aperture Ratio

Angular

Field of View

2.8-12mm 5%

1 : 1.2 5%

DIAGONAL

2.8mm : 119.9

12mm : 28.80

o o

LENS

Control ( + )

Control ( - )

Drive ( + )

Drive ( - )

15

SPECIFICATIONS

MODEL

Power

Power source

Power consumption

Image sensor

Total pixels

Scanning system

Scanning frequency

Sync. system

General

Electronic Shutter

Resolution

F

U

N

Min. illumination

Video Output

S/N Ratio

Camera Control

Lens

Shutter

Brightness

Backlight

AGC

DWDR

White Balance

Day & Night

Burst

D&N

B /

IR Smart

W

IR Smart Gain

C

I

T

O

N

Camera Title

S

P

E

C

I

A

L

Motion Detection

Privacy Masking

Parking Line

Lens Shading

2DNR

Mirror

Font Color

Contrast

Sharpness

Display

Connector

& etc.

DPC

Reset

Nega Image

Language

Power input

Video output

Lens Mount

Lens

Operating temperature

Operating humidity

External Dimension

Weight

NTSC

PAL DC12V

AC24V ± 10%

DC12V ± 10%

200mA (2.5 Watts)

1/3" Sony Super HAD

150mA (2.0 Watts)

811(H) x 507(V) 795(H) x 595(V)

2:1 interlace

15.734KHz(H) x 59.94Hz(V)

15.625KHz(H) x 50Hz(V)

1/60 ~ 1/100,000 sec.

Internal

1/50 ~ 1/100,000 sec.

600 TV lines (COLOR)

0.1 Lux(Color), 0.04 Lux(B/W) @ F1.2, 50IRE

1.0 Vp-p (75 ohm, Composite)

More than 50dB (AGC off)

OSD (Joystick Switch)

MANUAL / DC

AUTO, 1/60(1/50), Flickeless, 1/250 ~ 1/100,000sec

0 ~255

OFF / BLC / HLC(High Light Compensation)

OFF / LOW / MIDDLE / HIGH

OFF/ON

ATW1 / ATW2 / AWC->SET / MANUAL

AUTO / COLOR / B&W / EXT

OFF / ON

OFF / ON

0~255

OFF / ON

OFF / ON (4 area)

OFF / ON (8 position)

OFF / ON

OFF / ON(0~255)

OFF / ON

OFF / ON

FONT 16 COLOR, ID&TITLE 16 COLOR

0~255

0~31

CRT / LCD / USER

OFF / ON

ENGLISH / CHINESE

Dead Pixel Cancellation (Auto 64 Points)

FACTORY RESET / RETURN

2-pin Terminal Block

BNC connector

Fixed mount

f=2.8~12mm F1.2~360 Varifocal, ICR (D&N) o o

14 F ~ 122 F (-10 C ~ +50 C)

0 ~ 96% (non-condensing)

146( ) x 113(H) mm

700g

DC Jack

16

SPECIFICATIONS - IR CAMERA ONLY

MODEL

Power source

Power

Power consumption

Image sensor

Total pixels

Scanning system

General

Scanning frequency

Sync. system

Electronic Shutter

Resolution

Min. illumination

IR LED / Sensor

LED Lighting Distance

Video Output

S/N Ratio

Camera Control

Lens

Shutter

Brightness

Backlight

AGC

F

U

DWDR

White Balance

Day & Night

Burst

D&N

IR Smart

B / W

IR Smart Gain N

C

I

T

O

N

Connector

& etc.

Camera Title

Motion Detection

S

P

E

C

I

A

L

Privacy Masking

Parking Line

Lens Shading

2DNR

Mirror

Font Color

Contrast

Sharpness

Display

Nega Image

Language

DPC

Reset

Power input

Video output

Lens Mount

Lens

Operating temperature

Operating humidity

External Dimension

Weight

NTSC

AC24V ± 10% / DC12V ± 10%

410mA (5 Watts) - IR LED ON

1/3" Sony Super HAD

PAL

811(H) x 507(V) 795(H) x 595(V)

2:1 interlace

15.734KHz(H) x 59.94Hz(V) 15.625KHz(H) x 50Hz(V)

Internal

1/60 ~ 1/100,000 sec.

1/50 ~ 1/100,000 sec.

600 TV lines (COLOR)

0.1 Lux(Color), 0 Lux(B/W, IR LED ON) @ F1.2, 50IRE

IR LED 30EA(850nm / 40 degree) , Sensor 1EA

30m

1.0 Vp-p (75 ohm, Composite)

More than 50dB (AGC off)

OSD (Joystick Switch)

MANUAL / DC

AUTO, 1/60(1/50), Flickeless, 1/250 ~ 1/100,000sec

0 ~255

OFF / BLC / HLC(High Light Compensation)

OFF / LOW / MIDDLE / HIGH

OFF/ON

ATW1 / ATW2 / AWC->SET / MANUAL

AUTO / COLOR / B&W / EXT

OFF / ON

OFF / ON

0~255

OFF / ON

OFF / ON (4 area)

OFF / ON (8 position)

OFF / ON

OFF / ON(0~255)

OFF / ON

OFF / ON

FONT 16 COLOR, ID&TITLE 16 COLOR

0~255

0~31

CRT / LCD / USER

OFF / ON

ENGLISH / CHINESE

Dead Pixel Cancellation (Auto 64 Points)

FACTORY RESET / RETURN

2-pin Terminal Block

BNC connector

Fixed mount

f=2.8~12mm F1.2~360 Varifocal, ICR (D&N) o o o o

0 ~ 96% (non-condensing)

146( ) x 113(H) mm

700g

17

EXTERNAL DIMENSION

Dimensions

Window Size

146.3

Cable Entry

Weight - Unit:

Shipping:

12

1.0

4-

6

.

4

45 o

PF 3/4"

TAP o

4

5

0.1 in. (2.5mm thick), impact-resistant P.C (LEXAN)

3.93 in. (10cm) diameter

One 1" opening holes

1.54 lb. (0.7kg)

2.11 lb. (0.96 kg)

Unit: mm

50303011A