Bosch | RPS D5500CU | Installation guide | Bosch RPS D5500CU Installation guide

Remote Security Certificate Builder
en
Installation Guide
Remote Security Certificate Builder
Table of Contents | en
3
Table of contents
1
Introduction
4
1.1
Software license agreement
4
1.2
System requirements
6
1.3
About documentation
7
1.3.1
Related documentation
7
2
System overview
2.1
Certificate data
10
3
Installation
11
3.1
Download the installation file
11
3.2
Install the file
11
3.3
Remote Security Certificate Builder application updates
11
Bosch Security Systems, Inc.
9
Installation Guide
2015.04 | 06 | F01U262845
4
1
en | Introduction
Remote Security Certificate Builder
Introduction
Remote Security Certificate Builder allows you to create certificates for users to connect to
control panels through the Remote Security Control (RSC) app. Each user can connect to one
control panel.
Remote Security Certificate Builder extracts information from the remote programming
software database and combines it into a certificate for the target RSC user. Once you create
and send the certificates to the RSC mobile device, users can connect to and control
compatible control panels for which you granted them access.
1.1
Software license agreement
Bosch Security Systems, Inc. ("Bosch") licenses this software and all associated
documentation (the "Software") for your (also referred to herein as "Licensee") non-exclusive
use. Licensee has read this End User Software License Agreement ("License") and agrees to
abide by the terms and conditions of this License. By using the Software you the Licensee
accept and agree that you will abide by and are legally bound by the terms of this License. If
you do not agree to abide by the terms of this License you shall immediately return the
Software to Bosch. Licensee's use of the Software is subject to the following terms and
conditions:
1.
LICENSE: Under the terms of this nonexclusive, non-transferable (except as specifically
permitted herein) license:
2.
You may use a machine-readable form of the Software on a single computer or a single
server at a time, or as otherwise defined in the installation/operation manual of the Bosch
product and only for the operation of Bosch products.
3.
You may not modify, translate, create derivative works, decompile, disassemble or
reverse engineer the Software.
4.
You may not sublicense, lease or otherwise rent the Software without Bosch's prior
written consent.
5.
You may make one copy of the Software solely for backup or archival purposes, provided
such copy must contain the original Software proprietary notice. No other copying of the
Software or the accompanying documentation is permitted.
6.
This License will terminate automatically if you fail at any time to comply with any of its
terms or conditions. Upon termination, you shall immediately destroy the Software or
return it to Bosch along with any copies you have made, and to delete any installed copy
from your hardware.
7.
TRANSFER OF OWNERSHIP: You may transfer this License to another party only if you:
8.
Also transfer the License, Software, and all accompanying documentation and (by sale or
9.
Require the other party to abide by the terms of this License, and
lease) ownership of the associated Bosch hardware, if applicable,
10. Destroy all copies of the Software and any updates that you do not transfer to the other
party.
11. OWNERSHIP AND PROPRIETY RIGHTS: Although the media containing the Software is
yours, the Software is owned and copyrighted by Bosch and/or its suppliers. Except for
the rights expressly granted herein, Bosch and its suppliers retain all rights to the
Software, including, without limitation, the title to all copyright, patent, trade secret and
other intellectual and proprietary rights therein and any copies thereof, in whole or in
part, all of which are the valuable property of Bosch and/or its suppliers. You may not
remove, change or delete the copyright notice from the Software. If you make any copies
of the Software in whole or in part, all such copies shall contain the same copyright and
proprietary markings as appear on or in the original Software copy, including media
2015.04 | 06 | F01U262845
Installation Guide
Bosch Security Systems, Inc.
Introduction | en
Remote Security Certificate Builder
5
markings. You will instruct your employees and others having access to the Software in
and ensure their compliance with the terms of this License. You will use your best efforts
to prevent any unauthorized copying of the Software. You will be responsible for any
breach of any provision of this License by your employees. You shall not sell, transfer,
publish, disclose or otherwise make available the whole or any part of the Software or
any copies thereof to any third party or persons not permitted by the terms of, and
pursuant to the terms contained in this License. You are not in violation of this
Agreement, including this section, when a third party views the functional output
resulting from your use of the Software.
12. TAXES: You must pay all taxes that may now or hereafter be imposed, levied, or assessed
with respect to the possession or use of the Software or this License. You shall file all
reports required in connection with such taxes.
13. WARRANTY, LIMITATION OF LIABILITY, REMEDIES: THE SOFTWARE IS PROVIDED "AS
IS" WITHOUT WARRANTY OF ANY KIND INCLUDING WARRANTIES THAT THE SOFTWARE
IS ERROR FREE OR WILL RUN UNINTERRUPTED, OR WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR AGAINST INFRINGEMENT.
NEITHER BOSCH NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY LOSS OF PROFITS,
LOSS OF USE, INTERRUPTION OF BUSINESS, LOSS OF DATA, NOR FOR INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES OF ANY KIND WHETHER UNDER
THIS LICENSE OR OTHERWISE, OR FOR ANY CLAIM BY ANY OTHER PARTY. Bosch does
not warrant the functions provided by the Software. However, Bosch warrants the media
on which the Software is furnished to be free from material defects in materials and
workmanship under normal use for a period of 90 days from the date of original purchase.
Bosch's entire liability to you, and your exclusive remedy, shall be the replacement of the
media not meeting Bosch's warranty, provided you return the same to Bosch. The
replacement will be warranted for the remainder of the term of the original warranty or
30 days, whichever is longer. You assume responsibility for the selection of the Software
to achieve your intended results, and for the installation, use and results obtained from
the Software. Without limiting the generality of the foregoing, in no event shall Bosch be
liable for any consequential, special or general damages in any action, whether based on
tort, contract or otherwise, in connection with this License, or the Software furnished
hereunder. The damages excluded under this paragraph include, but are not limited to,
damages for loss of actual and anticipated profits, loss of programming and/or
production materials, and damage to the business reputation of user.
14. U.S. GOVERNMENT RESTRICTED RIGHTS: The Software is provided with restricted
rights. Use, duplication, or disclosure by the U.S. Government is subject to restrictions as
set forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer
Software clause at DFAR 252.227-7013, Federal Acquisition Regulation clause 52.227-19
(c) (2) Commercial Computer Software Restricted Rights, NASA clause 52.227.86 (d)
Commercial Computer Software Licensing or their successor.
15. EXPORT LAWS, APPLICABLE LAW: If you, the licensee under this License, are not a U.S.
citizen or you will take delivery of the Software outside the United States, Bosch will
secure the necessary U.S. Government authorizations for exportation of the Software to
your country of destination. You agree to not reexport the Software from that destination
to another foreign country without complying with all applicable U.S. Government
restrictions and requirements. If you, the licensee, are a U.S. citizen or you will take
delivery of the Software inside the United States, then you agree to not export the
Software from the United States without complying with all applicable U.S. Government
restrictions and requirements, including obtaining any necessary U.S. Government
authorization for the export. You will not permit the Software to be reexported from an
Bosch Security Systems, Inc.
Installation Guide
2015.04 | 06 | F01U262845
6
en | Introduction
Remote Security Certificate Builder
authorized foreign destination country to any other foreign country except in compliance
with all U.S. laws and regulations. This License will be governed by the laws of the State
of New York and the United States of America, including U.S. copyright laws.
16. TERM AND TRANSFER: You may terminate this Agreement at any time by returning the
Software to Bosch or destroying the Software together with all copies in any form. Bosch
may terminate this Agreement if you fail to comply with its terms and conditions in any
material respect. Upon termination, you may not use the Software and must return or
destroy all copies thereof in whole or in part, and we will not further support the
Software.
17. ENTIRE CONTRACT: This License, including all schedules, constitutes the entire and only
agreement between the parties and supersedes all prior agreements, understandings and
communications, whether oral or written, between the parties respecting the subject
matter hereof. There are no understandings, agreements, warranties or representations,
express or implied, except as set forth herein. This License prevails over any additional,
conflicting or inconsistent terms and conditions appearing on any purchase order
submitted by Licensee. This License shall be governed by and interpreted under the laws
of New York, excepting any conflicts of laws provision. Jurisdiction for any suit brought
hereunder shall be the federal or state courts residing in New York City.
1.2
System requirements
Minimum computer requirements
Processor
Pentium III, 800 MHz or faster
Operating system
–
Windows 8 (all editions)
–
Windows 7 (all editions)
–
Windows 2008 Server
–
Windows 2003 Server
–
Windows Vista (all editions)
–
Minimum: 512 MB
–
Recommended: 1 GB or higher
RAM
Communications
Ability to send email to the Remote Security Control device
Installation and operation prerequisites
–
The install process downloads and installs the required Microsoft .NET Framework 4 and
Windows Installer 4.5.
–
For Remote Security Certificate Builder installations on a computer that does not have
remote programming software, the user must have access to the database.
Compatible remote programming software
Remote Security Certificate Builder uses the remote programming software database to create
certificates:
–
Remote Programming Software v5.15.4 and higher
–
A-Link Plus Remote programming Software v4.5 and higher
Note that your control panel and the latest Remote Security Control features might require the
latest version of remote programming software.
Compatible control panels
Remote Security Certificate Builder can create certificates for the following control panels:
2015.04 | 06 | F01U262845
Installation Guide
Bosch Security Systems, Inc.
Remote Security Certificate Builder
–
Introduction | en
7
B9512G/B8512G, B9512G-E/B8512G-E (“E” variants require an Ethernet or cellular
module)
–
B5512/B4512/B3512, B5512E/B4512E/B3512E (“E” variants require an Ethernet or
cellular module)
1.3
–
D9412GV4/D7412GV4/D7212GV4
–
Solution 2000/3000 (ICP-SOL2-P/ICP-SOL3-P) (requires an Ethernet module)
About documentation
Throughout this document, the words “remote programming software” refer to all Bosch
programming applications compatible with Remote Security Certificate Builder (RPS and ALink Plus). Throughout this document, the words “control panel” refer to all Bosch control
panels compatible with Remote Security Certificate Builder.
This document provides specific steps for the latest version of Remote Security Certificate
Builder, RPS, and A-Link Plus.
Copyright
This document is the intellectual property of Bosch Security Systems, Inc. and is protected by
copyright. All rights reserved.
Trademarks
All hardware and software product names used in this document are likely to be registered
trademarks and must be treated accordingly.
1.3.1
Related documentation
To obtain any of the documents listed in this section, download them from the web.
Downloading documentation:
1.
Go to the Bosch website (us.boschsecurity.com).
2.
In the Search text box on the right side of the page, enter the name for the product for
which you want to download the documentation.
3.
Press [ENTER].
4.
If you see the desired document in the search results, click the link for the document to
open it. Otherwise, click the desired product’s Product Page button. The product page
opens with the Details tab selected.
5.
Click on the Documents tab, and then click the desired language listed to the right of the
desired document.
Call Bosch Security Systems, Inc., Technical Support (1-800-289-0096) if you need additional
assistance.
To obtain any of the documents listed in this section, download them from the web.
Downloading documentation:
1.
Go to the Bosch website (us.boschsecurity.com).
2.
In the Search text box on the right side of the page, enter the CTN for the product for
which you wish to download the documentation.
3.
Press [ENTER].
4.
If you see the desired document in the search results, click the link for the document to
open it. Otherwise, click the desired product’s Product Page button. The product page
opens with the Details tab selected.
5.
Click on the Documents tab, and then click the desired language listed to the right of the
desired document.
Call Bosch Security Systems, Inc., Technical Support (1-800-289-0096) if you need additional
assistance.
Bosch Security Systems, Inc.
Installation Guide
2015.04 | 06 | F01U262845
8
en | Introduction
Remote Security Certificate Builder
Documents
Remote Security Certificate Builder Datasheet (P/N: 5903555851)#
Remote Security Certificate Builder Installation Guide (P/N: F01U262845)# (this document)
Remote Security Control Reference Guide (P/N: F01U281304)#
Remote Security Certificate Builder Help*
RPS (D5500CU) Help*
ITS-ALINK-PLUS User Guide (P/N: F01U165466)#
*Within the application. #On www.boschsecurity.com.
2015.04 | 06 | F01U262845
Installation Guide
Bosch Security Systems, Inc.
Remote Security Certificate Builder
2
System overview | en
9
System overview
With Remote Security Certificate Builder, you collect specific remote programming software
data (for example, the RPS passcode), and create a secure certificate that allows an RSC user
to log on to the control panel shown in the certificate. Each certificate allows a single user to
connect to a single control panel. The RSC app is available for Android and Apple iOS devices.
4
6
F01U201283-03
Incorrect wiring will
damage this equipment.
Remote Security
Certificate
Builder
2
3
5
Certificate
RED - Low Battery - 12.1 VDC
To prevent risk of
electric shock,
disconnect AC
power and
telephone lines
before servicing.
D9412GV4
Commercial Protected-Premises Control Panel
Refer to the GV4 Series Control Panels Approved Applications Compliance
Guide (P/N: F01U201525) for System Wiring Diagram, Issue A and for
compatible smoke detectors. 2-wire Compatible Identifier “A”.
RED
Minimum system requirements for Classification in accordance with ANSI/SIA CP-01-2010
UL Listed and Classified control unit Model D9412GV4, D7412GV4, or D7212GV4;
UL Listed and Classified keypad Model D1256, D1257, D1260, D1255, D1255R, or D1255RB;
UL Listed Local Bell
POWER SUPPLY REQUIREMENTS
CLASS 2 TRANSFORMER
2
The Power Supply provides a maximum of 1.4 Amps for the Control Panel and all
16.5 VAC 40 VA 60 Hz
Accessory Devices. For System Loading, refer to the GV4 Series Control Panel
Model D1640
Operation and Installation Guide (P/N: F01U201527).
Internally Fused - Do not short
Requires Unswitched Outlet
All external connections except Terminal 5 (battery positive) are inherently power
Do not share with other equipment.
3
+ AUX POWER
1
4
BATTERY NEGATIVE ONLY
CAUTION: Avoid damage to Panel.
WARNING!
RELAY A
7
RELAY B
RELAY C
9
COMMON
10
EARTH
GROUND
This equipment should be installed in accordance with the NFPA 70 (National Electrical Code) and
PROGRAMMABLE NFPA 72 (National Fire Alarm Code).
ALARM OUTPUTS
Not suitable for remote station protected premises services where separate transmission circuits
Terminals
are required for fire, supervisory (when applicable) and trouble signals when using D185.
6 and 7
The D9412GV4 Control Panel is UL Listed For Central Station, Remote Station, Local, Auxiliary,
SWITCHED AUX Proprietary, and Household Fire Alarm, and Central Station, Local, Proprietary,
Police Station Connect, Household Burglar Alarm and Encrypted Line Security when
Terminal 8
communicating via a network.
35
TIP
RING
TELCO CORD MODEL D161
12
13
Point 3 Point 4
14
15
16
Point 5 Point 6
17
18
19
32
YELLOW DATA BUS A
31
DATA BUS B
30
GREEN
COMMON29
Short
0.0 - 1.3 VDC
Point 7 Point 8
Operation
Monitor
LED
Pulses when
Normal
Flickers when
Ringing
11
POWER +
NFPA
ZONEX OUT 128
Style 4.0
Signaling
Line
ZONEX IN 127
Circuits
VOLTAGE RANGES
3.7 - 5.0 VDC
- 3.0
VDC
ZONEX2.0
OUT
226
Open
Normal
Point 1 Point 2
PHONE LINE SEIZED LED
ON when communicating
OFF when idle
RED
SDI Connector
RED
BLACK
System is intended to be checked by a Qualified Technician at least every 3 years.
The types of initiating circuits the control panel has been approved for are A, M, W, SS.
The types of signaling the control panel has been approved for are DAC, OT, NC, RevPol.
S4 GROUND FAULT DETECT
Enabled
Disabled
36
34
COMMON33
SDI2 Connector
Battery: Replace every 3 to
5 years with one or two Model
D126 or D1218 12 V Lead Acid
Batteries.
Multi-Battery installation requires
Model D122 or D122L Dual Battery
Maximum charging current 1.4 A
Harness. Improper installation can
BATTERY POSITIVE ONLY.
be a fire hazard.
6
8
POWER +
DATA BUS B
BLACK
Refer to the GV4 Series Control Panel Operation and Installation
Guide (P/N: F01U201527) for Power Requirements relating to Terminals 6 and 7 .
Do not connect 24 V to terminals.
5
YELLOW DATA BUS A
GREEN
limited. Requirements for battery standby time might reduce allowable output.
CAUTION:
SDI
Remote
programming
software
database
1
WARNING!
Suitable for dry indoor
use only.
Devices powered by any
power output must
be supervised.
YELLOW - Charging Status
SDI2
LEDs Off when Normal
10.2 VDC - Battery Load Shed
20
21
22
GREEN
ZONEX IN 225
ZONEX POWER +24
ZONEX COMMON23
Figure 2.1: System overview
Callout ᅳ Description
1 ᅳ Credentials and account data within remote programming software
2 ᅳ Encryption, validity data, dealer information, and output and door limitations pulled into
Remote Security Certificate Builder
3 ᅳ Email the certificate generated on the Remote Security Certificate Builder computer to
the compatible device
4 ᅳ Compatible device with Remote Security Control installed
5 ᅳ Certificate and account details, status information, and commands communicated
between Remote Security Control and a compatible control panel using Ethernet or cellular
communications.
6 ᅳ Compatible control panel (D9412GV4 shown)
Remote Security Certificate Builder creates certificates from and for use with the following:
Compatible control panels
Remote Security Certificate Builder can create certificates for the following control panels:
–
B9512G/B8512G, B9512G-E/B8512G-E (“E” variants require an Ethernet or cellular
module)
–
B5512/B4512/B3512, B5512E/B4512E/B3512E (“E” variants require an Ethernet or
cellular module)
–
D9412GV4/D7412GV4/D7212GV4
–
Solution 2000/3000 (ICP-SOL2-P/ICP-SOL3-P) (requires an Ethernet module)
Compatible remote programming software
Remote Security Certificate Builder uses the remote programming software database to create
certificates:
–
Remote Programming Software v5.15.4 and higher
–
A-Link Plus Remote programming Software v4.5 and higher
Note that your control panel and the latest Remote Security Control features might require the
latest version of remote programming software.
Compatible devices for certificates
RSC and Remote Security Certificate Builder support both Android and iOS devices:
–
Android devices with Android version 4.0.3 (Ice Cream Sandwich) and higher
–
iPhone, iPod Touch, iPad with Apple iOS 6.0 and higher
Bosch Security Systems, Inc.
Installation Guide
2015.04 | 06 | F01U262845
10
2.1
en | System overview
Remote Security Certificate Builder
Certificate data
To create a valid certificate for the Remote Security Control user, Remote Security Certificate
Builder collects information from the control panel account (in remote programming
software). If you change the parameters listed in the following table, you must create a new
certificate and add the certificate to the Remote Security Control device.
Parameter
B9512G/
GV4 2.xx GV4 1.xx B Series
B8512G
2000/3000
RPS passcode
Application passcode
X
X
X
X
A-Link Plus/RSC passcode
Control panel IP address or
Solution
X
X
X
X
X
X
X
X
X
X
X
host name*
Control panel port number*
Datalock code
X
Network Encryption (enabled
X
and key)
Cellular IP address**
X
X
X
Cellular Port**
X
X
X
*For Ethernet certificates
**For cellular certificates
Notice!
Set the Application passcode in RPS from within the control panel account. Go to Automation
to find the Application Passcode entry. The default passcode is “Bosch_RSC“.
Set the A-Link Plus/RSC passcode in A-Link Plus within Control Panel Configuration > Comm
> Network Config > A-Link/RSC Password. The default passcode is “0000000000”.
All changes to the Application Passcode within RPS or the A-Link /RSC Password in A-Link
Plus require a new certificate for the Android or iOS device.
2015.04 | 06 | F01U262845
Installation Guide
Bosch Security Systems, Inc.
Remote Security Certificate Builder
3
Installation | en
11
Installation
Download the Remote Security Certificate Builder installation from the Bosch Security
Systems, Inc. website, and then install it.
3.1
Download the installation file
Downloading the installation files:
1.
Go to the Bosch website (us.boschsecurity.com).
2.
Click on the Products tab and select Intrusion Alarm Systems.
3.
On the right side of the page, under Online Tools, click the Remote Security Certificate
Builder link.
3.2
4.
After reviewing the required prerequisites, click Install.
5.
Save the install file to your computer hard drive.
Install the file
Installing Remote Security Certificate Builder:
1.
After completing the download, double-click the setup.exe file.
2.
When the Application Install dialog box appears, click Install.
3.
The Installing Remote Security Certificate Builder dialog box indicates the installation
progress.
4.
3.3
When the installation finishes, Remote Security Certificate Builder launches.
Remote Security Certificate Builder application updates
Every time you launch Remote Security Certificate Builder, it checks for updated application
versions. If the Remote Security Certificate Builder locates a new version, the Update Available
dialog box appears.
Click OK to install the update or click Skip if you do not wish to update at this time. The
Remote Security Certificate Builder application window opens.
Bosch Security Systems, Inc.
Installation Guide
2015.04 | 06 | F01U262845
Bosch Security Systems, Inc.
130 Perinton Parkway
Fairport, NY 14450
USA
www.boschsecurity.com
© Bosch Security Systems, Inc., 2015
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
Download PDF

advertising