Trek Incite 6i, 8i bike computer User manual

Below you will find brief information for bike computer Incite 6i, bike computer Incite 8i. This document describes the functions and features of the Trek Incite 6i and 8i bike computers, including how to set them up, use them, and troubleshoot any problems. The document also includes a limited warranty.

PDF Download
Document
Trek Incite 6i, 8i bike computer User manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Tracks distance, speed, and time
  • Displays average speed and maximum speed
  • Can be used with two different wheel sizes
  • Has a clock and a stopwatch
  • Includes a limited warranty

Frequently asked questions

To change the units of measurement, cycle through the display using the Mode button until ODO appears. Hold the Set button until KMH or MH flashes. Cycle through the display using the Mode button until MH or KMH appears. Press the Set button to make your selection.

To set a custom wheel size, cycle through the display using the Mode button until TME appears. Hold the Set button until the wheel size appears. For 8i, cycle through the display using the Set button until the preferred Wheel Select icon for Wheel 1 or Wheel 2 appears, and press the Mode button to select. Cycle through the display using the Mode button until the 4-digit number appears. Press the Set button. Cycle through the display using the Mode button to change the left-hand digit. Press the Set button to select. Repeat steps 5 and 6 to select all four wheel-size digits. Hold the Set button to return to the TME screen.

If the clock is blinking, it means that it is in setup mode. You can change the settings of the clock by cycling through the display using the Mode button until CLK appears. Hold the Set button until “12” or “24” flashes. Cycle through the display using the Mode button to your preferred setting. Press the Set button to select.
Preparing document for printing…
0%