Haibrain Proguard800 Reference guide

Below you will find brief information for Security System ProGuard800. This guide covers the basic functions and controls of the system, including arming, disarming, panic alarm, fire alarm, and medical alarm. It also includes instructions for checking trouble conditions, switching HA unit on and off, and using the message center. This compact guide is a valuable resource for anyone who wants to learn how to use the ProGuard800 security system.

PDF

Document

Quick Reference Guide
Function
ARM
INSTANT ARM
DISARM
Pres s…
Fonction
Additional Information
OR
OR
Hold down this key until
“Instant Arming OK?” is
displayed. Then Press .
If “One-Key Arming” is disabled enter your user
code when arming.
The default Master code is 1234.
Instant arming cancels the entry delay after Part
or Perimeter arming. This feature can be enabled
by your installer.
Entering your user code also silences the siren in
the event of an alarm.
[USER CODE]
PANIC
ALARM
+
FIRE
ALARM
+
MEDICAL
ALARM
+
MENU MODE
then [USER CODE]
Press these keys together and hold them down to
generate an alarm.
CHECK
TROUBLE
CONDITIONS
Use this key scroll the
system trouble list
SWITCH HA
UNIT ON
then [HA UNIT #]
SWITCH HA
UNIT OFF
then [HA UNIT #]
Use the menu navigation keys ( / ) until the
required menu item is displayed then press .
Alternatively, enter the shortcut (e.g. 21 for
Bypass Zones).
Pressing
also silences any trouble tones that
may be sounded by the system.
Enter the HA module number in two digits
(e.g. 03).
ACTIVER
SORTIE INST.
DESACTIVER
ALARME
PANIQUE
ALARME
INCENDIE
ALARME
MEDICALE
+
+
+
MODE MENU
VERIFIER
SITUATIONS
DE DEFAUT
ALLUMER
UNITE
DOMOTIQUE
ETEINDRE
UNITE
DOMOTIQUE
CARILLON
GLOBAL
puis
After recording a message, “Message Waiting” is
displayed until the message is played back.
ENREGISTRE
MESSAGE
puis
The Message Center is an optional feature that is
included with certain versions of ProGuard800.
LECTURE
MESSAGE
puis
then
Use the menu navigation keys ( /
enable or disable, then press .
RECORD
MESSAGE
then
PLAY
MESSAGE
then
) to choose
ALARM
Extra Informatie
OF
OF
INSCHAKELEN
DIRECT ALARM
ALARM UIT
[GEBRUIKERSCODE]
PANIEK
ALARM
+
BRAND
ALARM
+
MEDISCH
ALARM
+
MENU MODE
CONTROLEER
FOUTMELDING
X-10 HOME
AUTOMATION
MODULE AAN
Gevolgd door [HA
module #]
X-10 HOME
AUTOMATION
MODULE UIT
SERVICE
OPROEP
DEURBEL
BERICHT
OPNEMEN
BERICHT
AFSPELEN
Druk op…
The number dialed for the service call is
programmed by your installer.
Functie
APPEL
SERVICE
Hold down this key until
“Service Call Dialing” is
displayed.
SERVICE CALL
20223-20071114 • ProGuard800 Quick Reference Guide
&copy; HAIBRAIN &reg;">

Hi! I've read the Haibrain Proguard800 Quick Reference Guide. I can answer your questions about operating this security system. The guide provides a concise overview of arming/disarming procedures, alarm triggering, menu navigation, and troubleshooting. It also includes a section on the Power Tube Bias System for those with electronic knowledge.

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

It looks like you''ve reached a document that is written in multiple languages, including one that isn''t your native language. You can use the following links to temporarily hide pages without the language you prefer.