INDEX MIXER Mi Series M Series 4 6 STAGE GEAR DB Series 100 Series 10 12 PROCESSORS PC Series 16 POWER AMPLIFIER HPX Series HPD Series 18 20 POWER AMPLIFIER V Series FLASH Series SW Series WD Series NEOS AXS Series XEOS Series XENIA Series 22 26 30 32 34 40 42 PORTABLE SOUND SYSTEMS FREE Series 46 CONDENSER MICROPHONES 52 DYNAMIC MICROPHONES 54 INSTALLATION MICROPHONES 58 HEADSET AND LAVALIER MICROPHONES 60 WIRELESS MICROPHONES 64 IN-EAR MONITOR 76 MICROPHONES ACCESSORIES 77 3 MIXERS Mi SERIES The new Mi Series has been created by PROEL in order to offer very compact mixers with a high input density and a superior audio quality at a very affordable price. The series includes 3 models with 6, 10 and 12 channels, featuring in a very compact package a high number of inputs and a full set of intelligent functions, able to satisfy most of the sound reinforcement applications. Designed and engineered in Italy by PROEL R&D, Mi mixers are hosted in an ultra-rugged stylish metal case, providing extended durability for a stage-proof use. The smallest model of the series, Mi6, offers in a ultra-compact format the performance of large professional consoles, delivering a clean and accurate sound and full mixing capability. With respectively 10 and 12 inputs, Mi10 and Mi12 feature one of the finest digital effects of its class, the PROEL 24bit PROFEX DSP, providing 256 studio-grade presets (including mono and stereo TAP DELAY and TAP DELAY + REVERB) with a convenient LCD display for the effect selection. 4 MIXERS Mi6 • Ultra-compact 6-channel 2-bus mixer • 2-TRACK output • 2 MIC/LINE input channels with high-headroom, low-noise MIC preamps, 2-band EQ and PHANTOM power • Electronically balanced MAIN MIX outputs • 2 STEREO inputs with balance control • Applications: home recording and rehearsal, ultra-small PA systems for schools, gyms and meeting rooms, personal mixer for musicians • Stereo HEADPHONES / C. ROOM output Mi10 • Compact 10-channel 2-bus mixer • 2 MIC/LINE inputs with high-headroom, low-noise MIC preamps, 3-band EQ, LO-CUT and PHANTOM power • Two 4-LED VU-METERS • 24bit studio-grade PROFEX DSP with 256 effects, TAP delay and LCD display • Electronically balanced MAIN MIX outputs • 4 STEREO LINE inputs with balance control and effect send • Two 4-LED VU-METERS • 1 AUX send • Applications: small live bands (2 to 4 people), home and multimedia applications, rehearsal rooms, small fixed installations • 2-TRACK, HEADPHONES and CONTROL ROOM outputs Mi12 • Compact 12-channel 2-bus mixer • 4 MIC/LINE inputs with high-headroom, low-noise MIC preamps, 3-band EQ, LO-CUT and PHANTOM power • 24bit studio-grade PROFEX DSP with 256 effects, TAP delay and LCD display • Electronically balanced MAIN MIX outputs with 45mm fader • 4 STEREO LINE inputs with balance control, monitor and effect send • Two 4-LED VU-METERS • 2 AUX sends • Applications: small live bands (3 to 5 people), home and multimedia applications, rehearsal rooms, small fixed installations • 2-TRACK, HEADPHONES and CONTROL ROOM outputs 5 MIXERS M SERIES After providing for years thousands of satisfied users with the best mixing tools, we have decided to renovate our M Series with an assortment of novelties. The new M compact mixers have been updated with improved features and repacked into a new stylish package. While keeping the superior audio quality, the full set of features and the highest number of MIC inputs in the category that have been the hallmarks of our M Series, we have added extra ‘intelligent’ functions, such as USB routing and channel COMPRESSORS. All the models feature the new PROEL 24bit PROFEX DSP, one of the finest digital effect of its class, providing 256 studio-grade algorithms (including mono and stereo TAP DELAY and TAP DELAY + REVERB) and a convenient LCD display. Designed and engineered in Italy by PROEL R&D, M mixers are hosted in an ultra-rugged stylish metal case with ABS sides, providing extended durability for a stage-proof use. As a unique feature in the category, all the models include as standard both a padded carrying bag and metal brackets for 19” rack mounting. The ultra-portable M602FX with 2 mono and 2 stereo channels provides the most demanding performers with all the functions necessary to mix a limited number of signals with utmost accuracy. The 8-in, 6-mic M822USB now includes a versatile USB routing section, for a complete control of the signals to and from the PC and a built-in universal power supply. M1622USB, offering 16 inputs and 12 microphone channels, now features 4 AUX sends, the USB routing and also one-knob intelligent COMPRESSORS on the MONO channels. 6 MIXERS M602FX • Compact 6-channel 2-bus mixer • 2-TRACK IN & OUT with level control • 2 MIC/LINE inputs and 2 MIC/LINE STEREO inputs with 4 high-performance, low-noise MIC preamps • PHONES and C.ROOM outputs • 3-band EQ with musical filtering frequencies • Two 8-LED VU-METERS • 1 AUX send • Padded carrying bag and 19” rack adapters included • 24bit studio-grade PROFEX DSP with 256 effects, footswitch controllable TAP delay and LCD display • Applications: small live bands (2 to 4 people), home and multimedia applications, small fixed installations, rehearsal rooms • Balanced MAIN MIX output with 45mm fader M822USB • Compact 8-channel 4-bus mixer • PHONES and C.ROOM (with fader) outputs • 4 MIC/LINE inputs and 2 MIC/LINE STEREO inputs with 6 high-performance, low-noise MIC preamps and • USB interface with ROUTING (output can be taken from MIX L&R or AUX 1&2, input can be fed to MIX L&R or to CH 7/8) • 3-band EQ with musical filtering frequencies and LO-CUT filter (MONO channels) • 45mm faders • 2 AUX sends (MON + FX) • Two 8-LED VU-METERS • 24bit studio-grade PROFEX DSP with 256 effects, footswitch controllable TAP delay and LCD display • Padded carrying bag and 19” rack adapters included • 2-TRK IN & OUT with dedicated level control • ALT 3-4 additional bus • Balanced MAIN MIX output with XLR connectors on top panel • Built-in switching power supply. • Applications: small live bands (4 to 6 people), home and multimedia applications, small fixed installations, rehearsal rooms 7 MIXERS M1622USB • Compact 16-channel 4-bus mixer • 8 MIC/LINE inputs and 4 MIC/LINE STEREO inputs with 12 high-performance, low-noise MIC preamps • 3-band EQ with musical filtering frequencies plus LO-CUT filter and INSERT point on all MONO channels • “One-knob” COMPRESSORS for an accurate and easy-to-use dynamic processing of vocals and instruments • 4-band EQ with musical filtering frequencies on STEREO channels • 4 AUX sends and 2 GROUPS • 24bit studio-grade PROFEX DSP with 256 effects, footswitch controllable TAP delay and LCD display • 2-TRK IN & OUT with dedicated level control • PHONES and C.ROOM outputs • 60mm faders • Balanced MAIN MIX output with XLR connectors on top panel and INSERT point • 7-band GRAPHIC EQ assignable to MIX L&R or to AUX 1&2 • USB interface with ROUTING (output can be taken from MIX L&R or AUX 1&2, input can be fed to MIX L&R or to CH 7/8) • STANDBY function • Two 8-LED VU-METERS • Padded carrying bag and 19” rack adapters included • BNC connector for 12VDC lamp • Built-in switching power supply. • Applications: full live bands, large multimedia applications, fixed installations in large conference room, clubs and theaters 8 MIXERS OPTIONAL ACCESSORIES SDC670 GF29 Optional lamp with BNC connector Mi6 Optional footswitch Mi10 Mi12 M602FX M822USB M1622USB Connectors Balanced XLR-F MONO INPUT CHANNEL Mic Input Line Input sensitivity from -10 to -50 dB from -10 to -50 dB from -10 to -50 dB from -10 to -50 dB from 0 to -60 dB from 0 to -60 dB 2 Kohm 2 Kohm 2 Kohm 2 Kohm 2 Kohm 2 Kohm sensitivity from +20 to -20 dB from +20 to -40 dB from +20 to -40 dB from +20 to -20 dB from +20 to -40 dB from +20 to -40 dB 10 Kohm 10 Kohm 10 Kohm 10 Kohm 10 Kohm 10 Kohm 75Hz, 18dB/oct. 75Hz, 18dB/oct. 75Hz, 18dB/oct. 75Hz, 18dB/oct. HIGH (shelving) ±15 dB @ 12KHz ±15 dB @ 12 KHz ±15 dB @ 12 KHz ±15 dB @ 12KHz ±15 dB @ 12 KHz ±15 dB @ 12 KHz MID (peaking) ±15 dB @ 2.5KHz ±15 dB @ 2.5 KHz ±15 dB @ 2.5 KHz ±15 dB @ 2.5KHz ±15 dB @ 2.5 KHz ±15 dB from 100 Hz to 8 kHz LOW (shelving) ±15 dB @ 80Hz ±15 dB @ 80 Hz ±15 dB @ 80 Hz ±15 dB @ 80Hz ±15 dB @ 80 Hz ±15 dB @ 80 Hz Lo cut EQ Compressor Balanced JACK STEREO INPUT CHANNEL Mic Input Line Input EQ sensitivity from -0 to -40dB from -0 to -40dB from -0 to -40dB 2 Kohm 2 Kohm 2 Kohm sensitivity -10 dB +4 / -10 dB +4 / -10 dB from +20 to -20 dB from +20 to -20 dB from +20 to -20 dB 10 Kohm 10 Kohm 10 Kohm 10 Kohm 10 Kohm 10 Kohm HIGH (shelving) ±15 dB @ 12KHz ±15 dB @ 12 KHz ±15 dB @ 12 KHz MID (peaking) ±15 dB @ 2.5KHz ±15 dB @ 2.5 KHz HI-MID (peaking) Balanced XLR-F Balanced JACK ±15 dB @ 3 KHz LO-MID (peaking) ±15 dB @ 500 Hz LOW (shelving) ±15 dB @ 80Hz ±15 dB @ 80 Hz ±15 dB @ 80 Hz +4 dBu +4 dBu +4 dBu Balanced JACK Balanced XLR-M 0 dBu TRS JACK MASTER SECTION MAIN MIX nom. out level MAIN MIX insert nom. out level +4 dBu +4 dBu +4 dBu Graphic EQ 7-band C. ROOM output nom. out level ALT 3 - 4 output nom. out level GROUP output nom. out level AUX output nom. out level 2TRK nom. out level HEADPHONES 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu Unbalanced JACK 0 dBu 0 dBu Unbalanced JACK +4 dBu Balanced JACK 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu Unbalanced JACK 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu Unbalanced RCA nom. in level 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu 0 dBu Unbalanced RCA 32 ohm 32 ohm 32 ohm 32 ohm 32 ohm 32 ohm max. out level (2x) 193 mW (2x) 193 mW (2x) 193 mW (2x) 193 mW (2x) 193 mW (2x) 193 mW Stereo JACK Stereo IN/OUT 16-bit converter, 48 KHz sample rate Stereo IN/OUT 16-bit converter, 48 KHz sample rate Type B USB PROFEX DIGITAL EFFECT PROCESSOR (not available for Mi6) Effects 256 (16 presets x 16 variations): HALL, ROOM, VOCAL and PLATE reverbs; STEREO and MONO TAP DELAY; REV + DELAY, REV + TAP DELAY, REV + CHORUS A/D and D/A converters 24 bit DSP resolution 24 bit 2-DIGIT display, DIAL, PEAK LED, MUTE and TAP DELAY switch, MUTE and TAP DELAY footswitch (not available for Mi Series) GENERAL SPECIFICATIONS Maximum level all outputs +22 dBu Crosstalk meas. at 1 KHz > 82 dBu HUM & Noise unweighted < -93 dBu THD + Noise at +4dB, 1kHz < 0,008 % Dimensions (WxHxD) 173x222x60 mm 200x266x60 mm 254x302x60 mm 240 x 85 x 272 mm 315 x 91 x 363 mm 465 x 91 x 462 mm Weight 1.00 kg 1.50 kg 2.00kg 1,80 kg 3,40 kg 6,50 kg POWER REQUIREMENTS Supply 18 VAC 500 mA (use only supplied AC/AC ADAPTER) Internal power supply Mains Supply Voltage: 110-120 VAC (±10%) 50 / 60 Hz (US plug) 230-240 VAC (±10%) 50 / 60 Hz (EU plug) 240 VAC (±10%) 50 / 60 Hz (UK plug) 110-240 VAC (±10%) 50 / 60 Hz available with Europe mains cord (Shucko plug), US mains cord (NEMA 5-15P plug), UK mains cord (BS1363 plug) Consumption 17 W 32 W 32 W 32 W 45 W 75 W 9 STAGE GEAR DB SERIES D.I. Boxes (Direct Injection Boxes) are part of the essential set of tools required for any professional live sound situation or any application where the audio devices feature different levels, impedance and connections. Transforming audio signals from unbalanced to balanced, D.I. Boxes reduce the possibility of electrical disturbances on the line - especially over long cable runs such as from a musical instrument to the FoH mixing console. The DB series includes three different models of high-performance D.I. boxes: a single channel active (DB1A), a single channel passive (DB1P) and a dual channel active (DB2A). The circuitry of each model has been designed with the maximum care, using carefully selected electronic components, such as isolation transformers (DB1A, DB1P) and low-distortion ICs. This guarantees a clean, hum-free signal transmission from the instrument to the mixing consoles, even on very long cables, without impedance matching problems. On the front panels, a wide choice of connectors is available (XLR, JACK and RCA, depending on the model), allowing easy connection from a wide range of sources, including keyboards and samplers, guitars and basses, PC audio cards and any type of music player. The ACTIVE versions can be powered by 48 V phantom power from the mixing console, by a 9 V battery or, in large applications using many DI BOXES, by an external 9 V power adapter that can be daisy-chained using the double power connector on the rear panel. The innovative mechanical design of the three models includes an aluminum shell and rubber corners, which provide maximum protection in the toughest situations. When the two rubber corners are removed, two guides are exposed, allowing the coupling of two DI units, which can then be mounted in a 19” standard rack (rack ears included). This unique feature is extremely convenient for engineers who need to use a large number of DI BOXES in the same application. 10 STAGE GEAR DB SERIES DB1A • Single channel active D.I. Box DB2A • Dual channel active D.I. Box DB1P • MU-METAL core isolation transformer for full isolation between the musician’s gear and the sound reinforcement system • STEREO configuration: one unit can be used for a stereo device • MU-METAL core isolation transformer for full isolation between the musician’s gear and the sound reinforcement system • Low-noise ICs for balancing the signal, able to guarantee audio integrity and to handle very low-impedance loads. • High dynamic headroom with minimum phase and harmonic distortion • Input JACK and XLR connectors with link possibility (all the connections on the same side) • -10 dB, -20 dB, -30 dB PAD • CLIP and SIGNAL LED • High dynamic headroom with minimum phase and harmonic distortion • High input impedance reduces loading • Very good electronic performance thanks to SMD components and low noise IC • Very efficient ground lift circuitry • Input JACK, RCA and XLR connectors with link possibility (all the connections on the same side) • -20 dB, -30 dB PAD • Phase reverse switch • Powering options: 9V battery, +48V, external AC/DC adaptor supply • Powering options: 9V battery, +48V, external AC/DC adaptor supply • 19” rack mountable (ears included) • 19” rack mountable (ears included) • Designed to be used by professional musicians and sound engineers for rental, touring, studio and installation applications System Type Input Section Input Impedance Max Input Level Connectors Output Section Output Max. Output Level Connector System Performance Insertion loss CMR Phase distortion Distortion THD 20÷20k Hz 0dBu Noise Frequency Response Controls Indicators General Phantom Power External AC/DC adaptor Standalone/Standby Current consumption Dimensions (W x H x D) Weight (excluding batteries) • Specially-designed MAKE-UP filter at 4 kHz is for cutting any hiss or buzz noise coming from acoustic or electric guitars and basses • High dynamic headroom with minimum phase and harmonic distortion • Input JACK and XLR connectors with link possibility (all the connections on the same side) • -20 dB, -40 dB, -60 dB PAD • 19” rack mountable (ears included) • Designed for applications were it is not possible or practical to power the unit • Particularly suited for use with stereo keyboards, DJ equipment and PC-based audio systems DB1A 1-channel active DI BOX DB2A 2-channel active DI BOX 1M Ohm (pad at 0 dB) 47k Ohm (pad at -20 dB) 44k Ohm (pad at -30 dB) +5 dBu (pad at 0 dB) +25 dBu (pad at -20 dB) +35 dBu (pad at -30 dB) Two Parallel 1/4” jack connectors and a parallel XLR connector (unbalanced) Jack: Tip Hot / Sleeve Ground XLR female: Pin 2 Hot / Pin1 & 3 Ground 200K Ohm (pad at 0 dB) 47k Ohm (pad at -20 dB) 47k Ohm (pad at -30 dB) +5 dBu (pad at 0 dB) +25 dBu (pad at -20 dB) +35 dBu (pad at -30 dB) Two Parallel 1/4” jack connectors and a parallel RCA connector (unbalanced) Jack: Tip Hot / Sleeve Ground 120K Ohm (pad at 0 dB) 47k Ohm (pad at -20 dB) 47k Ohm (pad at -40 dB) +15 dBu (pad at 0 dB) +35 dBu (pad at -20 dB) +55 dBu (pad at -40 dB) Two Parallel 1/4” jack connectors and a parallel RCA connector (unbalanced) Jack: Tip Hot / Sleeve Ground Transformer Balanced (fully isolated) into 600 Ohms or greater +3 dBu (for 0.1% THD at 50 Hz) +5 dBu (for 0.1% THD at 1k Hz) XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground Active discrete devices (transformer less) into 600 Ohms or greater +5 dBu (for 0.1% THD at 50 Hz) +5 dBu (for 0.1% THD at 1k Hz) XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground Transformer Balanced (isolated with shielding) into 1K Ohms or greater -5 dBu (for 0.1% THD at 50 Hz) +5 dBu (for 0.1% THD at 1k Hz) XLR male: Pin 2 Hot / Pin 3 Cold / Pin1 Ground < 1 dB > 60 dB +11° at 20 Hz, -6° at 20k Hz < 0.007 % < -105 dBu unweighted 10 Hz to 100 kHz, +0dB/-1 dB On/off, Pad -10, Pad -20, Gnd Lift, Ø inv On, signal, clip < 1 dB > 50 dB +20° at 20 Hz, -30° at 20k Hz < 0.007 % < -105 dBu unweighted 10 Hz to 40 kHz, +0dB/-1 dB On/off, Pad -20, Pad -30, Gnd Lift On 20 dB > 100 dB 0° at 20 Hz, 0° at 20k Hz < 0.007 % < -105 dBu unweighted 10 Hz to 100 kHz, +0dB/-1 dB Pad -20, Pad -40, Gnd Lift, Filter (12” emulator) - +24 volts DC to +48 volts DC +9 volts DC 9 volt PP3 type, battery preferably alkaline less than 8 mA 215 x 50 x 125 mm 1.08 kg (2.38 lb) +24 volts DC to +48 volts DC +9 volts DC 9 volt PP3 type, battery preferably alkaline less than 8 mA 215 x 50 x 125 mm 1.06 kg (2.34 lb) 215 x 50 x 125 mm 1.04 kg (2.29 lb) 11 STAGE GEAR 100 SERIES PROEL introduces in the STAGE GEAR family a Series of 8 new exciting models. The 100 Series includes a range of accessories and useful tools, ranging from D.I. Boxes and Headphone Amps to Signal Splitters, Tube Preamps and Power Supply Units, designed to complement audio systems in stage applications, recording studios and fixed installations. Hosted in a stylish extruded and stackable aluminum shells or in sturdy metal chassis, the 100 Series products are meant to deliver sound quality, versatility and stage-proof reliability in a very affordable package. DIRECT100A • • • • Active Direct Injection Box High quality isolation transformer for ultra-flat frequency response Low-noise OP amps with high-quality sound performance XLR-F and ¼” JACK input connectors + ¼” JACK link • XLR-M balanced output • 20dB PAD and GND lift switch • Stackable aluminum shell DIRECT100P • • • • Passive Direct Injection Box High quality isolation transformer for ultra-flat frequency response High quality electronic components ¼” JACK input and link connectors 12 • XLR-M balanced output • 20dB & 40dB PAD and GND lift switch • Stackable aluminum shell STAGE GEAR 100 SERIES PHANTOM100 • Phantom Power Supply • Provides clean and hum-free +48V power supply for all condenser microphones • Suitable for all applications where +48V power supply is not available from mixing console (direct recording to PC, use of devices with no phantom power, fixed installations, etc.) • Powered by DC adaptor (included) • Stackable aluminum shell SPLIT100 • Signal Splitter • Splits a microphone or line input signal into two outputs equal to the original • High-quality isolation transformer for a complete separation between the two output signals • GND LIFT switch for each output • XLR-F input + XLR-M link connectors, 2 x XLR-M output connectors • Stackable aluminum shell HPAMP104 • • • • 4-CH Headphone Amplifier Very compact and portable package ¼” JACK + RCA stereo/mono input 4 x ¼” JACK stereo headphone outputs with individual level controls • • • • 2 x 45 W @ 100 ohm max output level 16 ohm minimum output impedance (per channel) Powered by DC adaptor (included) Stackable aluminum shell 13 STAGE GEAR 100 SERIES HPAMP106 • 6-ch Headphone Amplifier • 6 independent high-power amplifier sections suitable for virtually any type of headphones • 4 selectable main stereo/mono inputs with ¼” JACK connectors (REAR panel) • 6 stereo headphone outputs with individual level controls , input • • • • selector and ¼” JACK connectors (FRONT panel) 2 x 193mW max output level at 32 ohm (per channel) 16 ohm minimum output impedance (per channel) Built-in power supply with shielded transformer and voltage selector. 19” rack mountable metal chassis TUBE100USB • TUBE microphone preamp with USB • 12AX7 tube preamp section for adding warmth to microphones and instruments • Built-in low-noise +48V phantom power • PHASE reverse switch, adjustable LO-CUT filter, VOCAL EQ, built-in LIMITER circuit • • • • • Input and output GAIN controls plus SATURATION function Accurate dual LEVEL METER Microphone (XLR-F) and instrument (¼” JACK) inputs XLR-M and ¼” JACK balanced outputs USB 1.1 compliant, compatible with Windows XP/Vista/7 and Mac OS 9.1 and newer • • • • Total output power 2000mA Complete isolation and short-circuit protection for each output Superior quality power transformer for hum-free operation Full cable set included PSU110 • • • • • 10-Out Power Supply Universal high-performance power supply for pedal effects 8 x 9VDC outputs, 1 x 12VDC output, 1 x 12VAC output Output 7 and 8 with fine power adjustment Dip switches for individual adjustment of the 9VDC outputs 14 STAGE GEAR 100 SERIES System Type DIRECT100A DIRECT100P 1 channel active DI TUBE100USB Input Section System Type Tube Mic Preamp with USB Microphone Input Input Impedance >250 Kohm >250 Kohm Impedance 2.5 Kohm Max Input Level +6 (PAD at 0) / +26 (PAD at 20) dBu +10 (PAD at 0) / +30 (PAD at 20) / +50 (PAD at 40) dBu Sensitivity from 0 to -60 dBu Connectors 1 x XLR-F + 1 x 1/4" jack unbalanced 1 x 1/4" jack unbalanced Connectors XLR-F (balanced) Link 1 x 1/4" jack unbalanced 1 x 1/4" jack unbalanced Output Section Output Transformer Balanced (fully isolated) Transformer Balanced (isolated with shielding) Insertion Loss 0 dB 26 dB Load Impedance 600 Ohms or greater 600 Ohms or greater Connector XLR male XLR male System Performance Distortion THD 50÷20k Hz 0dBu < 0.005 % < 0.007 % Noise < -105 dBu unweighted - Frequency Response 10 Hz to 40 kHz (-3 dB) 40 Hz to 20 kHz (-3 dB) General Controls ON/OFF, PAD -20, GND LIFT PAD 0 / -20 / -40, GND LIFT Power ON - Phantom Power +18 volts DC to +48 volts DC - Battery 9 volt PP3 type alkaline - Dimensions (W x H x D) 152 x 50 x 134 mm 134 x 50 x 105 mm Weight (excluding batteries) 0,70 Kg 0,55 Kg System Type Instrument Input Impedance >1 Mohm Sensitivity from +10 to -50 dBu Connector 1/4" jack (unbalanced) Insert Impedance send 100 ohm Impedance return 10 Kohm Nominal out Level 0 dBu Connectors 1/4" jack (unbalanced) Analog Output Impedance 60 ohm Nominal out level +4 dBu Maximum out level +21 dBu Connectors XLR-M and 1/4" jack (balanced) USB Output Type USB 1.1 and 2.0 (type B) Converter 16 bit Sampling rate 48 KHz System Performance HPAMP104 HPAMP106 4-channel headphone amplifier 6-channel headphone amplifier Input Section Inputs 1 stereo 4 stereo Input Impedance 500 Kohm 47 Kohm Max Input Level +15 dBu +25 dBu Connectors 1/4" jack stereo, 2 x RCA 2 x 1/4" jack unbalanced (each input) Outputs 4 stereo 6 stereo Maximum output (2x) 45mW @ 100 ohm (each) (2x) 193 mW @ 32 ohm (each) Load Impedance minimum 16 ohm per channel minimum 16 ohm per channel Max gain +20 dB each channel +13 dB each channel Connector 1/4" jack stereo (each output) 1/4" jack stereo (each output) Distortion (THD) 0.02 % 0.02 % Noise < -98 dBu unweighted < -98 dBu unweighted Frequency Response 20 Hz - 20 KHz (-3 dB) 20 Hz - 20 KHz (-3 dB) OUTPUT LEVEL, INPUT STEREO/MONO OUTPUT LEVEL, INPUT SELECTOR Power ON Power ON Power supply 12-18 VDC (adapter included) Selectable 100-120 VAC, 220-240 VAC, 50-60 Hz Dimensions (W x H x D) 152 x 50 x 72 mm 480 x 44 x 210 mm Weight 0,8 Kg 3,9 Kg Noise < 95 dB unweighted Distortion (THD) 0.008 % (at 1 KHz +4 dBu) Frequency response 20 Hz - 20 KHz (-0.5 dB) General Output Section System Performance MIC/INSTR selector, INPUT GAIN, 48V, PHASE REV, LOW CUT, LOW CUT FREQUENCY, VOCAL EQ, SATURATION, LIMIT, ENHANCE, OUT LEVEL, REC MUTE, ON/OFF switch INPUT VU-METER, 48V, VU METER, USB, MUTE Supply 18 VAC 1000 mA (adapter included) Mains Supply Voltage 100-120 VAC or 220-240 VAC, 50-60 Hz Consumption 32 W Dimensions (W x H x D) 200 x 56 x 140 mm Weight 1,8 Kg General PHANTOM100 SPLIT100 PSU110 System Type 48V Phantom Power Supply System Type System Type 10-Out Power Supply Input Connector 1 x XLR-F Input Connector 1 x XLR-F Output 1-4 9V DC (adjustable to 12V DC by DIP switch) Ouput Connector 1 x XLR-M Link Connector 1 x XLR-M Output 5-6 9V DC (adjustable to 15V DC by DIP switch) Output Phantom Power 48V DC +/-2V Ouput Connectors 2 x XLR-M Output 7-8 9V DC (adjustable from 4 to 9V DC by knob) Frequency Response 20 Hz - 20 KHz (-3 dB) Max Input Level +4 dBu (at 50Hz) Output 9 12V DC ON/OFF switch Distortion 0.002% (0 dBu, 1 KHz) Output 10 12V AC Power ON Frequency Response 20 Hz - 20 KHz (-3 dB) MAX total power output 2000 mA Power supply 9V DC (adapter included) Insertion loss -2.5 dB into 600 ohm load Power supply Selectable 100-120 VAC, 220-240 VAC, 50-60 Hz Dimensions (W x H x D) 134 x 50 x 72 mm 2 x GND LIFT Dimensions (W x H x D) 169 x 68 x 107 mm Weight 0,7 Kg Dimensions (W x H x D) 134 x 50 x 123 mm Weight 1,6 Kg Weight 0,6 Kg 15 PROCESSORS PC SERIES The PC260 digital loudspeaker controller is based on the CORE DSP platform and feature state-of-the-art signal processing, advanced functions and a very intuitive UI, with a direct access to all the editing functions and remote control capability. The 40bit floating point resolution and the 24bit AD/DA converters ensure a perfect signal integrity with a dynamic range in excess of 110dB, for a superior sonic performance. The PC260 includes a full set of functions and has 2 inputs (with the choice of AES digital input) and 6 outputs. Each INPUT features 5 bands of full PARAMETRIC EQ (including parametric, shelving, notch, res. HP and LP, allpass and bandpass), 28 bands of GRAPHIC EQ and 3 bands of an extremely versatile and powerful DYNAMIC EQ. A fully programmable COMPRESSOR/ LIMITER and up to 600ms of delay are also available. The OUTPUTS include any kind of crossover filters with slope up to 48dB per octave, together with 5 bands of PEQ, fully programmable COMPRESSOR/LIMITER and up to 600ms of delay. Additional features include a 1/3 oct. RTA with dedicated MIC input with phantom power and a GROUPING function. The SPL Manager, specifically designed for the application in fixed installations, is a very powerful tool that allows to schedule, in 4 different scenes, 16 events on each input and output, including MUTE, level change, COMPRESSOR threshold change and PRESET change. These events can be then performed automatically according to the internal clock of the unit. PC260 can be remotely controlled with PRONET software through the USB port on the front panel and it can be included in a PRONET network using the two RJ-45 connectors on the rear panel (with the optional USB2CAN converter). PC260 • • • • 40bit floating point resolution CORE DSP 24bit AD/DA converters 110dB dynamic range 5 bands of full PARAMETRIC EQ on each INPUT and OUTPUT, including peaking, shelving, notch, resonating HP and LP, allpass and bandpass • 28 bands of GRAPHIC EQ on each INPUT • 3 bands of DYNAMIC EQ on each INPUT • Fully programmable COMPRESSOR/LIMITER on each INPUT and OUTPUT 16 • Up to 600ms delay time on each INPUT and OUTPUT • Full METERING on each INPUT and OUTPUT • RTA with dedicated MIC input • GROUPING function • SPL manager • AES digital input PRONET remote control thru USB • PRONET network capability PROCESSED PROCESSORS PC SERIES PC260 Input Section Inputs Input Impedance Maximum Input Level Input gain Input Connector Digital Input Output Section Outputs Maximum Output Level Output Gain Output Connector Crossover Filters Slopes Type Delays Max Delay time Delay Step Parametric EQ.filters Maximum number of filters EQ Type EQ Gain Q (bandwidth) EQ freq Shelving gains Dynamic EQ filters Maximum number of filters EQ Type EQ Gain Q (bandwidth) EQ freq Shelving gains Graphic EQ. Maximum number of EQ. EQ Type EQ freq EQ Gain Extra Features RTA range RTA mic input SPLM Process \ Conversion AD/DA conversion AD/DA latency Sampling frequency Internal porcessing General Performance (filters out) Frequency response Dynamic range Distortion (THD) Display Input metering LED Output Metering LED Remote control General Dimensions Weight AC Power 2 electronically balanced > 10k ohms +20dBu (-6dB pad) +6 dB to –30 dB in 0.2 dB steps XLR F - XLR M to link AES/EBU 6 +20dBu +15 dB to –30 dB in 0.2 dB steps and mute XLR M 6/12/18/24/48dB per octave Bessel / Butterworth / Linkwitz-Riley 600 ms on all In and Out 21 μs 5 Per input / 5 per output Parametric, Notch, Shelf, Bandpass, resonant HP/LP, Allpass +15 dB to -15 dB in 0.2 dB steps 0.4 to 28.85 (3 to 0.05, 1/20 oct. steps) 15.6 Hz – 22.62 kHz (1/20 oct. steps) ±15 dB in 0.2 dB steps 3 per input Parametric, Shelf 6 +15 dB to -15 dB in 0.2 dB steps 0.4 to 28.85 (3 to 0.05, 1/20 oct. steps) 15.6 Hz – 22.62 kHz (1/20 oct. steps) ±15 dB in 0.2 dB steps 1 per input 28 band 1/3 oct. 31.5Hz - 16kHz 1/3 oct. +15 dB to -15 dB in 0.2 dB steps 20Hz-20kHz 1/3oct. 15V phantom power 4 scene /16 events for each scene 24 bit 1.68 ms (analogue in – analogue out @ 48 kHz) 48 KHz 40 bit floating point +½ dB 20 Hz¸20 kHz >110 dB 20 Hz¸20 kHz unwtd < 0.015% @ 1kHz, +18dBu 192x32 LCD Graphic Display 2 x 4 LED 6 x 4 LED USB, RJ45 PRONET In/Out 44 x 482 x 295 mm 4.1 kg (9 lb) 80 to 250V ±15% @ 50/60 Hz 17 POWER AMPLIFIERS HPX SERIES HPX is a series of power amplifiers designed to provide entertainers and audio professionals with quality performance and maximum portability at a very affordable price. Combining rock-solid CLASS AB and CLASS H power stages to extremely efficient SWITCH MODE power supplies, the HPX amplifiers delivers from 900W to 6000W of pure power to your speaker system in 2-ohm operation, providing clear and defined highs together with extremely punchy lows. Thanks to the SMPS light-weight technology and to the efficient cooling systems, the HPX come in a very compact and portable package, yet sturdy enough to provide the maximum protection and durability over the years. In the models from 900 to 2800, a built-in selectable LPN (Low-Pass Notch) filter enhances the amplifier response at the low frequencies, providing an increased punch while protecting the speakers from over-excursion and increasing the headroom. The two biggest models of the series, HPX4600 and HPX6000, feature a 3-tier CLASS H power stage, providing very high power level in a high density structure. With an overall efficiency higher than 75% and a comprehensive set of controls, including a 3-position GAIN selector and switchable SOFT CLIP LIMITERS, they represent a cost-effective solution also for large sound reinforcement systems requiring very high power levels combined to top quality performance. The front panel, with very comfortable die-cast handles and removable dust filters, features a comprehensive set of LED indicators together with detented level controls. The connections include XLR, 1/4” JACK and RCA for the inputs, SPEAKON and binding post for the outputs. 18 POWER AMPLIFIERS HPX SERIES • • • • • • • • • • • • • • • STEREO/PARALLEL/BRIDGE mode 2- or 3-position GAIN selector XLR, 1/4” JACK and RCA input connectors (900 to 2800) SPEAKON and binding post output connectors AC, DC, thermal and short-circuit protection FRONT-TO-BACK ventilation system with variable speed fan and removable dust filters • Compact chassis with die-cast handles HPX900: 900W TOTAL POWER at 2ohm in less than 7kg HPX1200: 1200W TOTAL POWER at 2ohm in less than 7kg HPX2400: 2400W TOTAL POWER at 2ohm in less than 10kg HPX2800: 2800W TOTAL POWER at 2ohm in less than 10kg HPX4600: 4600W TOTAL POWER at 2ohm in less than 14kg HPX6000: 6000W TOTAL POWER at 2ohm in less than 14kg Ultra-efficient SWITCH MODE POWER SUPPLY Integrated CLIP LIMITERS (user-defeatable in 4600 and 6000) Selectable LPN filter (Low-Pass Notch - 900 to 2800) Power 8 ohm* Power 4 ohm* Power 2 ohm ** Power BRIDGE 8 ohm* Power BRIDGE 4 ohm** HPX900 HPX2800 HPX1200 HPX4600 HPX2400 HPX6000 HPX900 HPX1200 HPX2400 HPX2800 HPX4600 HPX6000 200 300 450 600 900 300 450 600 900 1200 450 800 1200 1600 2400 600 1000 1400 2000 2800 850 1400 2300 2800 4600 1200 2000 3000 4000 6000 * W RMS per channel, both channel driven, 1KHz THD 1%, ** 40ms burst Output Stage Class AB Class H Frequency Response 20 Hz - 20 kHz 10 kΩ unbalanced 20 kΩ balanced Input Impedance Damping Factor >100 >200 Slew Rate S/N Ratio (Unweighted) >20v/us >85 dB >90 dB Input Connectors Output Connectors Controls NEUTRIK Combo and XLR M SPEAKON and Binding Post Detented INPUT LEVEL control, GAIN selector, STEREO/BRIDGE/PAR MODE selector, LOW-PASS NOTCH (LPN - 900 to 2800), GND lift, SOFT CLIPPING (4600, 6000) STANDBY, ON, PARALLEL, BRIDGE, SIGNAL, LIMIT, PROTECT Cooling Protections AC low power, DC, thermal, short circuit, VHF, CLIP limiter Power Supply 230 VAC 50 Hz or 120 VAC 60 Hz Dimensions (W x H x D) Weight >80 dB XLR M, 1/4” JACK, RCA 483 x 89 x 335 6.0 kg (13.2 lb) 483 x 89 x 395 6.9 kg (15.2 lb) 9.2 kg (20.3 lb) 483 x 89 x 505 9.2 kg (20.3 lb) 13.0 kg (28.7 lb) 13.6 kg (29.9 lb) 19 POWER AMPLIFIERS HPD SERIES PROEL has updated his HPD Series of high performance professional amplifiers with two brand new models. HPD2004 and HPD4004 are 4-channel amplifiers employing PROEL DA modules, a new generation of digitally controlled Cass D power amplifiers with Switch Mode Power Supply (SMPS) featuring an innovative technology. Unlike most of the competitors in this range, which use a fixed switching frequency, the PWM (Pulse Width Modulation) output stage of DA modules uses a variable switching frequency according to the input signal level. Thanks to a sophisticated hardware and software structure, this system offers performances far above most of the products currently available on the market: better sound definition, high-fidelity reproduction of any frequency of the audio range, higher dynamics at any signal level with low distortion even at very high powers. The superior sound quality can be compared with top-of-the-range AB-class analog systems, while DA modules thanks to the use of SMPS and Class D feature very compact size and light weight, efficiency above 90% and negligible heat dissipation. The very high efficiency levels result also in a significant reduction in the energy waste associated with large installations, a noticeable reduction in operating costs and a direct benefit to the environment. Featuring high power levels in a lightweight and compact chassis, the HPD amplifiers are much easier and more economical to transport than conventional models and this, in turn, makes them even more environmentally friendly. HPD amplifiers include an input section with the choice of different filtering options (FLAT / BI-AMP / HPF) and feature an ergonomic and functional design with removable dust filters, for an easy maintenance in all conditions of use and therefore extensive durability. The protection system includes thermal protection, short circuit protection, high frequency protection and CLIP LIMITER circuit. 20 POWER AMPLIFIERS HPD SERIES HPD2004 • HPD4004 • Very efficienct Switch Mode Power Supply for a reduced power consumption • Extensive protection system for maximum reliability • Several filtering options available in the amplifier’s input section (FLAT/BI-AMP/HPF) • Aluminum front panel with removable dust filters • Made in Italy • • • • HPD2004: 4 x 500W on 4 ohm, 2 x 1000W on 8 ohm HPD4004: 4 x 1000W on 4 ohm, 2 x 2000W on 8 ohm Less than 12kg in 2 rack units for up to 4000W DA digitally controlled Class D power modules with SWITCH MODE power supply (SMPS) • PWM (Pulse Width Modulation) output stages with variable switching frequency for a superior sound definition and very high dynamics at any signal level HPD2004 Channel Frequency Response 20 Hz - 20 kHz Input Sensitivity Voltage Gain HPD4004 4 0 dB / 40 x 35 dB / 32 dB 38 dB / 32 dB Input Impedance 10 kΩ unbalanced - 20 kΩ balanced Damping Factor >500 @ 8 Ω S/N Ratio (Unweighted) >105 dB Input Connectors Combo and XLR M Output Connectors Speakon Cooling variable speed DC fan LED Indicators Filtering options protect, signal, bridge, limit FLAT, HPF (100 Hz selectable High-Pass Filter), BI-AMP (100 Hz 24 dB/octave Crossover Filter) Protections DC, thermal, soft start, short circuit, CLIP limiter Power Supply 230 VAC 50 Hz or 120 VAC 60 Hz Rated 1/8 power output 800 VA Max Power Consuption 2450 VA 1350 VA 4900 VA Dimensions (W x H x D) 483 x 89 x 383 Weight 11 kg (24.3 lb) 21 V SERIES Loudspeaker Systems ALUE in PERFORMANCE the proven quality of PROEL sound in powerful and efficient loudspeaker systems ALUE in ENGINEERING lightweight amplifier technology in compact cabinets, for maximum portability and versatility ALUE in DESIGN 22 a modern and innovative look, expression of the most advanced Italian design LOUDSPEAKERS V SERIES V Series is the new generation of PROEL powered loudspeakers delivering absolute value in terms of performance, engineering and design. These ultra-portable speakers combine, in carefully engineered and light-weight cabinets, the clearest and most accurate PROEL sound with Class D amplifier technology and Switch Mode Power Supply,, offering an unbeatable PA solution at its price point. All the three models feature an extremely efficient amplifier module capable of delivering 600 W of robust power to the transducers. Thanks to the use of SMPS technology, this power comes in an ultra-lightweight package, making the V models the most portable PROEL speakers ever.. The power module is hosted in a fully sealed aluminum box,, which provides protection, perfect insulation of the cabinet from the outside and extremely efficient cooling. Thanks to the carefully selected speakers and to the sophisticated active electronics,, including dual CLIP LIMITERS for an undistorted sound even at the loudest level, the sound of the V Series has been precisely tuned in every details, in order to provide unheard performance in this price range. The V series cabinets, expression of the most advanced Italian design,, include a super-comfortable luggage-style top handle for an effortless portability. The slanted shape allows the V speakers to be laid on their side and used also as stage monitors. 23 LOUDSPEAKERS V SERIES V10A V12A V15A • Bi-amplified 2-way system • Bi-amplified 2-way system • Bi-amplified 2-way system • 1” high-definition neodymium compression driver on a wide-dispersion 90° x 60° constant coverage horn • 1” high-definition neodymium compression driver on a wide-dispersion 90° x 60° constant coverage horn • 1” high-definition neodymium compression driver on a wide-dispersion 90° x 60° constant coverage horn • 10” long-excursion woofer with 2” voice coil • 12” long-excursion woofer with 2.5” voice coil • 15” long-excursion woofer with 2.5” voice coil • 600 W total peak power amplifier hosted in a fully sealed aluminum box • 600 W total peak power amplifier hosted in a fully sealed aluminum box • 600 W total peak power amplifier hosted in a fully sealed aluminum box • 50 W continuous class AB amplifier for the high frequencies • 50 W continuous class AB amplifier for the high frequencies • 50 W continuous class AB amplifier for the high frequencies • 250 W continuous class D amplifier for the low frequencies • 250 W continuous class D amplifier for the low frequencies • 250 W continuous class D amplifier for the low frequencies • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • Selectable MIC /LINE input with 2-band EQ • Selectable MIC /LINE input with 2-band EQ • Selectable MIC /LINE input with 2-band EQ • Integrated active processor with dual CLIP LIMITER for maximum control and protection • Integrated active processor with dual CLIP LIMITER for maximum control and protection • Integrated active processor with dual CLIP LIMITER for maximum control and protection • FRONT LED with ON or SIGNAL/CLIP selection • FRONT LED with ON or SIGNAL/CLIP selection • FRONT LED with ON or SIGNAL/CLIP selection • SPL MAX 123 dB • SPL MAX 124 dB • SPL MAX 126 dB • Frequency response 70 Hz - 20 kHz • Frequency response 60 Hz - 20 kHz • Frequency response 50 Hz - 20 kHz • Lightweight polypropylene cabinet with extensive framing system • Lightweight polypropylene cabinet with extensive framing system • Lightweight polypropylene cabinet with extensive framing system • Asymmetrical shape for the use also as a stage monitor • Asymmetrical shape for the use also as a stage monitor • Asymmetrical shape for the use also as a stage monitor • 1 super-comfortable luggage-style top handle for effortless portability • 4 x M10 flying points for fixed installation • 10 kg TOTAL WEIGHT • 1 super-comfortable luggage-style top handle for effortless portability • 4 x M10 flying points for fixed installation • 13 kg TOTAL WEIGHT • 1 super-comfortable luggage-style top handle for effortless portability • 4 x M10 flying points for fixed installation • 18 kg TOTAL WEIGHT 24 LOUDSPEAKERS OPTIONAL ACCESSORIES KPTNX04 Universal Wall Mount for Brackets KPTV10 - KPTV12 - KPTV15 System type COVERV10 COVERV12 COVERV15 KPTV10 KPTV12 KPTV15 Brackets for V10A- V12A - V15A V10A V12A V15A 2-way vented enclosure 2-way vented enclosure 2-way vented enclosure High Frequency Device Low Frequency Device 10” woofer with 2” voice coil 12” woofer with 2.5” voice coil 15” woofer with 2.5" VC Angular Coverage 90° H x 60° V 90° H x 60° V 90° H x 60° V Total peak power 600 W 600 W 600 W HF Amplifier Continuous Power 50 W Class AB 50 W Class AB 50 W Class AB LF Amplifier Continuous Power 250 W Class D 250 W Class D 250 W Class D Power Supply SMPS SMPS SMPS Processing Analog Analog Analog Frequency Response 60 Hz - 20 kHz 50 Hz - 20 kHz 45 Hz - 20 kHz Max SPL 123 124 126 Connectors IN: COMBO, LINK: XLR M IN: COMBO, LINK: XLR M IN: COMBO, LINK: XLR M Controls LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector LEVEL, LINE/MIC selector, LOW EQ, HIGH EQ, GND LIFT, FRONT LED selector Monitor Taper 45° 44° 44° Flying System 4 x M10 - top/bottom 4 x M10 - top/bottom 4 x M10 - top/bottom Construction Polypropylene Polypropylene Polypropylene Cabinet Colour Black Black Black Handles 1 x top 1 x top 1 x top, 2 x sides Mounting Pole 1 x bottom 1 x bottom 1 x bottom Power Supply 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector 230 VAC or 120 VAC 50/60 Hz with LINE VOLTAGE selector Dimensions (W x H x D) 330 x 512 x 280 mm 380 x 600 x 328 mm 440 x 712 x 400 mm Weight 10 kg 13 kg 18 kg 25 LOUDSPEAKERS FLASH SERIES For years PROEL FLASH loudspeakers have provided thousands of users all around the world with the finest sound in its class together with versatility, portability and stylish design. Now the whole series has been renovated introducing major upgrades in performance, features and design. The STANDARD FLASH models now becomes V2 and are powered by brand new amplifier modules combining the high efficiency of Class D output stages with the light-weight and compact size of Switch Mode Power Supply: this gives FLASH V2 a massive punch and a consistent reserve of power while making them lighter and extremely portable. The builtin 2-channel mixer with independent LINE and MIC inputs and 2-band EQ can turn any FLASH V2 system into an instant PA system. The use of carefully selected speakers, including a new high-definition CELESTION compression driver, together with a sophisticated active signal processor and a dual clip limiter, provide an accurate acoustic response and an amazing sound pressure level with very low distortion. With the introduction of new Class D SMPS amplifier modules with a massive power-per-size ratio and to the use of the powerful 40-bit 96KHz CORE DSP, PREMIUM FLASH models becomes HDA. Thanks to the sophisticated signal processing provided by the CORE DSP, which includes also a versatile Dynamic EQ, and to the high-grade CELESTION speakers, FLASH HDA delivers an outstanding sound definition and a dynamic performance typical of top-end professional systems. The 4 EQ PRESETS selectable from the amplifier panel (FLAT, DJ, SPEECH, MONITOR) make these systems perfectly adaptable to any kind of application. All the models include the classic FLASH features, such as light weight polypropylene cabinets with extended internal ribbing and trapezoidal shape, constant-coverage (90° x 60°) high frequency horns for a uniform and coherent dispersion, convenient transport handles and built-in flying points for the use in fixed installation. All the models in the FLASH Series can be combined with the powerful PROEL SW sub-woofers, which provide the perfect low extension for creating high-power multi-way systems, to be used also in large sound reinforcement applications. 26 LOUDSPEAKERS FLASH SERIES FLASH8V2 FLASH12V2 FLASH15V2 • Bi-amplified 2-way system • Bi-amplified 2-way system • Bi-amplified 2-way system • 1” CELESTION compression driver on a 90° x 60° constant coverage horn • 1” CELESTION compression driver on a 90° x 60° constant coverage horn • 1” CELESTION compression driver on a 90° x 60° constant coverage horn • 8” CELESTION woofer with 1.8” voice coil • 12” woofer with 2” voice coil • 15” woofer with 2.5” voice coil • 600 W total peak power • 600 W total peak power • 600 W total peak power • 50 W continuous class AB amplifier for the high frequencies • 50 W continuous class AB amplifier for the high frequencies • 50 W continuous class AB amplifier for the high frequencies • 250 W continuous class D amplifier for the low frequencies • 250 W continuous class D amplifier for the low frequencies • 250 W continuous class D amplifier for the low frequencies • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • MIC and LINE inputs with independent level control and NEUTRIK connectors • MIC and LINE inputs with independent level control and NEUTRIK connectors • MIC and LINE inputs with independent level control and NEUTRIK connectors • 2-band EQ • 2-band EQ • 2-band EQ • Dual CLIP LIMITER • Dual CLIP LIMITER • Dual CLIP LIMITER • SPL MAX 122 dB • SPL MAX 124 dB • SPL MAX 127 dB • Frequency response 70 Hz - 20 kHz • Frequency response 60 Hz - 20 kHz • Frequency response 50 Hz - 20 kHz • Passive version with 150W AES power handling • Passive version with 200 W AES power handling • Lightweight polypropylene cabinet with extensive framing system • Lightweight polypropylene cabinet with extensive framing system • Lightweight polypropylene cabinet with extensive framing system • Symmetrical trapezoidal shape for the use also as a stage monitor • Asymmetrical shape for the use also as a stage monitor • Symmetrical trapezoidal shape for the use also as a stage monitor • 1 top handle and 2 aluminum side handles • 4 x M10 flying points • 1 top handle • 4 x M8 flying points • 1 top handle and 2 aluminum side handles • 4 x M10 flying points 27 LOUDSPEAKERS FLASH SERIES FLASH12HDA FLASH15HDA • Active processed 2-way loudspeaker systems • Active processed 2-way loudspeaker systems • 1” CELESTION compression driver with 1.75” VC on a constant coverage 90° x 60° horn • 1” CELESTION compression driver with 1.75” VC on a constant coverage 90° x 60° horn • 12” CELESTION woofer with 3” VC • 15” CELESTION woofer with 3” VC • 1200 W peak power • 1200 W peak power • 100 W continuous class AB amplifier for the high frequencies • 100 W continuous class AB amplifier for the high frequencies • 500 W continuous class D amplifier for the low frequencies • 500 W continuous class D amplifier for the low frequencies • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • 96 KHz, 40bit floating point CORE DSP with Dynamic EQ (DEQ) • 96 KHz, 40bit floating point CORE DSP with Dynamic EQ (DEQ) • LINE/MIC input • LINE/MIC input • 4 EQ PRESETS (FLAT, DJ, SPEECH, MONITOR) • 4 EQ PRESETS (FLAT, DJ, SPEECH, MONITOR) • SPL MAX 128 dB • SPL MAX 129 dB • Frequency response 50 Hz - 20 kHz • Frequency response 45 Hz - 20 kHz • Lightweight polypropylene cabinet with extensive framing • Lightweight polypropylene cabinet with extensive framing • Symmetrical trapezoidal shape for the use also as a stage monitor • Symmetrical trapezoidal shape for the use also as a stage monitor • 1 top handle and 2 aluminum side handles • 1 top handle and 2 aluminum side handles • 4 x M10 flying points • 4 x M10 flying points PROCESSED SNWH ABS installation bracket for FLASH5PW (white) SNBK ABS installation bracket for FLASH5P (black) FLASH5 • • • • Bi-amplified 2-way system Studio-grade dome tweeter on elliptical waveguide 5” woofer with PP cone 200W total peak power • 20W class AB amplifier for the high frequencies • 80W class D amplifier for the low frequencies • XLR, 1/4” JACK and dual RCA connectors • 2 active EQ presets available (MIDFIELD / NEARFIELD) 28 • • • • • • • • Dual CLIP LIMITER SPL MAX 114 dB Frequency response 70 Hz - 20 kHz Passive version with 80W AES power handling, available in BLACK (FLASH5P) and WHITE (FLASH5PW) Lightweight polypropylene cabinet with extensive framing system Symmetrical trapezoidal shape for the use also as a stage monitor 1 top handle 3 x M6 flying points LOUDSPEAKERS OPTIONAL ACCESSORIES KPTNX04 Universal Wall Mount for Brackets FLASH5 - FLASH8 - FLASH12 - FLASH15 COVERFL8 COVERFL12 COVERFL15 KPTFL5 • KPTFL5W KPTFL8 • KPTFL12 • KPTFL15 FLASH5 BLACK and WHITE FLASH8 - FLASH12 - FLASH15 Brackets for Brackets for ACTIVE FLASH5A FLASH8A V2 FLASH12A V2 FLASH15A V2 FLASH12HDA FLASH15HDA System type 2-way vented enclosure 2-way vented enclosure 2-way vented enclosure 2-way vented enclosure 2-way vented enclosure 2-way vented enclosure High Frequency Device Soft dome tweter on elliptical waveguide 1’’ compression driver with aluminum voice coil 1’’ compression driver with aluminum voice coil 1’’ compression driver with aluminum voice coil 1’’ compression driver with 1.75 VC 1’’ compression driver with 1.75 VC Low Frequency Device 5 woofer with PP cone 8 woofer with 1.8 VC 12 woofer with 2 VC 15 woofer with 2.5 VC 12 woofer with 3 VC 15 woofer with 3 VC Angular Coverage 90° H x 60° V 90° H x 60° V 90° H x 60° V 90° H x 60° V 90° H x 60° V 90° H x 60° V Total Peak Power 200 W 600 W 600 W 600 W 1200 W 1200 W HF Amplifier Continuous Power 20 W Class AB 50 W Class AB 50 W Class AB 50 W Class AB 100 W Class AB 100 W Class AB LF Amplifier Continuous Power 80 W Class D 250 W Class D 250 W Class D 250 W Class D 500 W Class D 500 W Class D Power Supply Linear SMPS SMPS SMPS SMPS SMPS Processing Analog Analog Analog Analog 96 KHz, 40 bit floating point CORE DSP 96 KHz, 40 bit floating point CORE DSP Frequency Response 70 Hz - 20 kHz 60 Hz - 20 kHz 50 Hz - 20 kHz 45 Hz - 20 kHz 50 Hz - 20 kHz 45 Hz - 20 kHz Max SPL 114 122 124 127 128 129 Connectors IN/LINK: XLR F, 1/4 JACK, 2 x RCA IN: Combo, XLR F MIX OUT: XLR M IN: Combo, XLR F MIX OUT: XLR M IN: Combo, XLR F MIX OUT: XLR M IN: XLR F LINK: XLR M IN: XLR F LINK: XLR M LEVEL, NEARFILED/MIDFIELD, GND LIFT MIC LEVEL, LINE LEVEL, LOW EQ, HIGH EQ, GND LIFT MIC LEVEL, LINE LEVEL, LOW EQ, HIGH EQ, GND LIFT MIC LEVEL, LINE LEVEL, LOW EQ, HIGH EQ, GND LIFT LEVEL, MIC/LINE SELECTOR, PRESET (FLAT/DJ/SPEECH/MON), GND LIFT LEVEL, MIC/LINE SELECTOR, PRESET (FLAT/DJ/SPEECH/MON), GND LIFT Power Supply 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz Weight 3.6 kg (7.9 lb) 8.5 kg (18.7 lb) 16.5 kg (36.4 lb) 23.5 kg (51.8 lb) 19.4 kg (47.7 lb) 26.5 kg (60.6 lb) PASSIVE FLASH5P FLASH8P V2 FLASH12P V2 Nominal Impedance 16 Ω 8Ω 8Ω Power Rating (continuous) 80 W 150 W 200 W Power Rating (peak) 160 W 300 W 400 W Frequency Response 80 Hz - 20 kHz 70 Hz - 20 kHz 60 Hz - 20 kHz Sensitivity 91 dB @ 1 W/1 m 96 dB @ 1 W/1 m 98 dB @ 1 W/1 m Crossover Frequency 3000 Hz 3000 Hz 2000 Hz Connectors Push terminals 2 x SPEAKON linked 2 x SPEAKON linked Weight 2.5 kg (5.5 lb) 8 kg (17.6 lb) 16.5 kg (36.4 lb) Monitor Taper 42° 42° 42° 42° 42° 42° Flying System 3 x M6 - top/bottom 4 x M8 - top/bottom 4 x M10 - top/bottom 4 x M10 - top/bottom 4 x M10 - top/bottom 4 x M10 - top/bottom Construction Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Polypropylene Mounting Pole - 1 x bottom 1 x bottom 1 x bottom 1 x bottom Dimensions (W x H x D) 175 x 265 x 176.5 mm 270 x 420 x 260 mm 390 x 630 x 360 mm 470 x 730 x 400 mm 390 x 630 x 360 mm 470 x 730 x 400 mm GENERAL SPECIFICATIONS 29 LOUDSPEAKERS SW SERIES The SW Series is a range of sub-woofers designed to complement PROEL full-range passive or active speakers. The variety of size, power and SPL offered by the five SW models provides the perfect low extension solution for any speaker model available in the PROEL range. All the SW models feature large VC woofers and band-pass or vented design, which provide very ‘punchy’, dynamic lows together with an extended low frequency response. The CLASS H or CLASS D amplifier modules can generate a massive amount of continuous power in a compact and reliable package. All the modules include a STEREO pre-amp section, 24dB/oct. crossover filters with selectable frequency and PHASE reverse switch. The cabinets are built with 15/18mm plywood and feature 2 or 3 metal handles and sturdy 75mm wheels for an easy transport (except SW110). SW118HAV2 SW115HAV2 • Active band-pass sub-woofer • Compact active band-pass sub-woofer • 18” die-cast CELESTION woofer with 4” VC for an extended response and very deep bass • 15” CELESTION woofer with 3” VC for a very high pressure level and tight lows • 2000 W peak power • 1000 W peak power • Light-weight 1000 W continuous Class D amplifier with SMPS • Light-weight 500 W continuous Class D amplifier with SMPS • STEREO input, link and output • STEREO input, link and output • 24 dB/oct. STEREO crossover filter with selectable frequency • 24 dB/oct. STEREO crossover filter with selectable frequency • PHASE REVERSE switch • SPL MAX 128 dB • SPL MAX 131 dB • Frequency response 37 Hz - 160 Hz • Frequency response 34 Hz - 140 Hz • Compact plywood cabinet with two metal handles and four 75mm wheels • Plywood cabinet with three metal handles and four 75mm wheels 30 • PHASE REVERSE switch LOUDSPEAKERS SW SERIES SW118A • Compact active vented sub-woofer • 18” woofer with 3” VC for a deep and extended response • 1000 W peak power SW115A SW110A • Compact active sub-woofer in BPS configuration (series-loaded band-pass) • Very compact active band-pass sub-woofer for portable systems and fixed installations • 15” woofer with 3” VC for a quick and dynamic response • 10” woofer with 2 x 2.5” VC for a high output level and punchy lows • Light-weight 500 W continuous Class D amplifier with SMPS • 700 W peak power • 500 W peak power • 350 W continuous Class H amplifier • 250 W continuous Class D amplifier • STEREO input, link and output • STEREO input, link and output • STEREO input, link and output • 24 dB/oct. STEREO crossover filter with selectable frequency • 24 dB/oct. STEREO crossover filter with selectable frequency • 24 dB/oct. STEREO crossover filter with selectable frequency • PHASE REVERSE switch • PHASE REVERSE switch • PHASE REVERSE switch • SPL MAX 129 dB • SPL MAX 126dB • SPL MAX 122dB • Frequency response 36 Hz - 140 Hz • Frequency response 40 Hz - 160 Hz • Frequency response 46 Hz - 160 Hz • Passive version available (SW118P) • Passive version available (SW115P) • Plywood cabinet with two metal handles and four 75mm wheels • Plywood cabinet with two metal handles and four 75mm wheels • Passive version available with built-in STEREO passive crossover (SW110P) • Plywood cabinet with one handle ACTIVE SW110A SW115A SW118A SW115HAV2 SW118HAV2 System type Bandpass enclosure subwoofer BPS enclosure subwoofer Vented enclosure subwoofer BPS enclosure subwoofer Bandpass enclosure subwoofer Loudspeaker 10 woofer with 2x2.5 VC 15 woofer with 3 VC 18'' woofer with 3 VC 15 woofer with 3 VC 18'' woofer with 4 VC Amplifier Continuous Power 250 W 350 W 500 W 500 W 1000 W Frequency Response 46 Hz - 160 Hz 40 Hz - 160 Hz 36 Hz - 140 Hz 37 Hz - 160 Hz 34 Hz - 140 Hz Max SPL 116 dB 126 dB 129 dB 128 dB 131 dB Connectors IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M IN: 2 x NEUTRIK COMBO OUT/LINK: 2 x JACK ¼’’, 2 x XLR-M IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M IN: 2 x NEUTRIK COMBO OUT: 2 x NEUTRIK XLR-M LINK: 2 x NEUTRIK XLR-M Volume, GND lift X-over Frequency, Phase Volume, Stereo/Mono, Flat Out GND lift, X-over frequency, Phase Volume, GND lift X-over Frequency, Phase Volume, GND lift X-over Frequency, Phase Volume, GND lift X-over Frequency, Phase Power Supply 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz Weight 17 kg (37.5 lb) 32 kg (70.6 lb) 45 kg (99.2 lb) 29.5 kg (65 lb) 51 kg (70.6 lb) PASSIVE SW110P SW115P SW118P Nominal Impedance 8+8 Ω 8Ω 8Ω Power Handling (continuous) 150 + 150 W 350 W 500 W Power Handling (peak) 300 + 300 W 700 W 2000 1 Frequency Response 46 Hz - 160 Hz 40 Hz - 160 Hz 36 Hz - 170 Hz (without filter) Sensitivity 90 dB @ 1 W/1 m 97 dB @ 1 W/1 m 98 dB @ 1 W/1 m Crossover Frequency 160 Hz, 12 dB/oct LP - 6 dB/oct HP 160 Hz, 12 dB/oct LP - 6 dB/oct HP suggested 120 Hz Connectors BINDING POST (IN/OUT) 2 x NEUTRIK SPEAKON (IN/OUT) 2 x NEUTRIK SPEAKON (IN/LINK) Weight 15.5 kg (34.2 lb) 29 kg (63.9 lb) 44 kg (97 lb) 15/18 mm plywood Black anti-scratch paint 1 handle 1 x pole holder 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 x steel handles 1 x pole holder 4 x 75 mm wheels 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 x steel handles 1 x pole holder 4 x 75 mm wheels 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 2 x steel handles 1 x pole holder 4 x 75 mm wheels 15/18 mm plywood Black anti-scratch paint 1.5 mm metal grille 3 x steel handles 1 x pole holder 4 x 75 mm wheels 520 x 330 x 350 mm 430 x 550 x 600 mm 520 x 660 x 640 mm 430 x 550 x 600 mm 595 x 700 x 700 mm GENERAL SPECIFICATIONS Dimensions (W x H x D) 31 LOUDSPEAKERS WD SERIES The WEDGE Series is a complete range of active stage monitors designed to offer not only to professional musicians and rental companies, but also to amateur musicians and nonprofessional users, a highly valuable monitoring solution at a very affordable price. The WEDGE stage monitors provide a perfect sound intelligibility and a high SPL in an extremely light-weight and portable enclosure. The coaxial transducers, designed under PROEL specifications, represent the best choice for stage monitors, not only because they fit into more compact cabinets, but also for the fact that they provide a perfect alignment in the emission of high and low frequencies and a controlled directivity for a perfect listening from any position. The lightweight CLASS D amplifier modules with SMPS, coupled to a sophisticated analog processing, provide an impressive sound pressure level, with an extremely detailed response, particularly in the vocal range, and a remarkable resistance to feedback. Two tailored EQ PRESETS are available for the use of the speaker not only for stage monitoring (MONITOR), but also as a MAIN SOUND SYSTEM (FOH). The low-profile, stylish and unobtrusive cabinet, with recessed handles and scratch-resistant polyurethane painting, fits perfectly on any stage. The three models available offer the perfect solution for different monitoring situations. The ultra-compact WD10A offers a high-performance monitoring also on small stages or venues with a limited space and it ‘s the ideal solution for speech, vocals and keyboards. WD12A, with its high SPL and its fullrange response, is the favorite choice for vocals, guitar, horns and electronic instruments or as a high-power monitor for DJs. Finally WD15A, with its full extension and powerful and deep response at the low frequencies, is the ideal monitor for bass and drums players. The horn-loaded HF section and the powerful amplifier make it the perfect solution for monitoring also in very large stages. 32 LOUDSPEAKERS WD SERIES WD10A WD12A WD15A • Active 2-way coaxial stage monitor • Active 2-way coaxial stage monitor • Active 2-way coaxial stage monitor • 1” neodymium compression driver with 1” VC • 1” compression driver with 1.35” VC • 10” woofer with 2” VC • 12” woofer with 2.5” VC • 1” compression driver with 1.35” VC on a waveguide • 500 W total peak power • 700 W total peak power • 15” woofer with 3” VC • 50 W continuous class AB amplifier for the high frequencies • 50 W continuous class AB amplifier for the high frequencies • 900 W total peak power • 250 W continuous class D amplifier for the low frequencies • 300 W continuous class D amplifier for the low frequencies • Switch Mode Power Supply (SMPS) • Switch Mode Power Supply (SMPS) • 350 W continuous class D amplifier for the low frequencies • Dual LIMITER circuit • Dual LIMITER circuit • Switch Mode Power Supply (SMPS) • 2 optimized EQ PRESETS for MONITOR or FOH (Front-Of-House) use • 2 optimized EQ PRESETS for MONITOR or FOH (Front-Of-House) use • Dual LIMITER circuit • SPL MAX: 123dB • SPL MAX: 124dB • 2 optimized EQ PRESETS for MONITOR or FOH (Front-Of-House) use • Frequency response: 60 Hz - 20 kHz • Frequency response: 50 Hz - 20 kHz • SPL MAX: 126dB • Lightweight plywood cabinet with black anti-scratch polyurethane paint • Lightweight plywood cabinet with black anti-scratch polyurethane paint • Frequency response: 45 Hz - 20 kHz • Reinforced metal grille • Reinforced metal grille • Recessed connection panel for added protection • Recessed connection panel for added protection • 50 W continuous class AB amplifier for the high frequencies • Lightweight plywood cabinet with black anti-scratch polyurethane paint • Reinforced metal grille • Two recessed handles for easy transport • Two recessed handles for easy transport • Recessed connection panel for added protection • Pole adapter • Pole adapter • Two recessed handles for easy transport • Pole adapter System type WD10A WD12A WD15A 2-way coaxial vented enclosure 2-way coaxial vented enclosure 2-way coaxial vented enclosure High Frequency Device 1” neo compression driver with 1"VC 1” compression driver with 1"VC 1” compression driver with 1.35”VC Low Frequency Device 10” woofer with 2"VC 12” woofer with 2.5"VC 15” woofer with 3"VC Angular Coverage 80° H x 80° V 80° H x 80° V 60° H x 60° V Total Peak Power 500 W 700 W 900 W HF Amplifier Continuous Power 50 W Class AB 50 W Class AB 50 W Class AB LF Amplifier Continuous Power 200 W Class D 300 W Class D 400 W Class D Power Supply Linear SMPS SMPS Processing Analog Analog Analog Frequency Response 60 Hz - 20 kHz 50 Hz - 20 kHz 45 Hz - 20 kHz Max SPL 123 dB 124 dB 126 dB Connectors IN: Combo LINK: XLR M IN: Combo LINK: XLR M IN: Combo LINK: XLR M LEVEL, PRESET selector (MONITOR, FOH), GND lift LEVEL, PRESET selector (MONITOR, FOH), GND lift LEVEL, PRESET selector (MONITOR, FOH), GND lift Power Supply 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz 230 VAC or 120 VAC 50/60 Hz Monitor Taper 36° 36° 36° Construction Plywood with black anti-scratch polyurethane Plywood with black anti-scratch polyurethane Plywood with black anti-scratch polyurethane paint paint paint Mounting Pole 1 x side 1 x side 1 x side Handles 2 x side 2 x side 2 x side Dimensions (W x H x D) 480x300x420 mm 510x340x500 mm 610x365x545 mm Weight 11 kg (24.25 lb) 15 kg (33 lb) 18 kg (43 lb) CPWD10 • CPWD12 • CPWD15 WEDGE SERIES FLIGHT CASE (for 2 unit) 33 LOUDSPEAKERS NEOS AXS SERIES NEOS AXS series represents the highest expression of PROEL Research & Development applied in loudspeaker systems and incorporates the latest technologies developed by PROEL in advanced sound reinforcement systems able to provide premium sound, maximum performance and up-to-date features. NEOS AXS is a complete range of self-powered loudspeaker systems combining cutting-edge transducers with CLASS D amplifiers and digital processors, thus ensuring the best integration between acoustics and electronics for an optimal performance. NEOS AXS are designed for the use both as high-performance mobile systems for live applications and as versatile and remotely controllable systems for advanced fIxed installations. All full-range models in the NEOS AXS Series are provided with a dual-angle pole holders (0° or -7.5°), which allows a tilted vertical position for optimal coverage of the listening area and with an asymmetric HF horn that can be rotated to change the dispersion angle when the speaker sits horizontally. All the models, also available in passive versions (PX), are housed in rugged in 15/18mm birch plywood cabinets, featuring die-cast handles and multiple flying points. A wide range of accessories is available for suspension in permanent installations or live applications. 34 LOUDSPEAKERS NEOS AXS SERIES All the models are powered by DA power modules, a new generation of CLASS D power amplifiers with SWITCH MODE power supply, able to provide an exceptional sound definition together with very high dynamics and low distortion in an ultra-compact package. The onboard control electronics are based on the 96 kHz, 40bit floating point CORE DSP platform, able to optimize further the system performances through the use of sophisticated EQ, crossover and dynamics algorithms. The CORE processing provides also network functionality through the PRONET control software based on CANBUS communication protocol (USB2CAN converter needed). The PRONET control software provides access to the major processing features, including full PARAMETRIC and DYNAMIC EQ, advanced COMPRESSOR/ LIMITERS and DELAY, together with the real time control of parameters such as temperature, supply voltage and protections. Setting created by the user can be saved in user presets that can be recalled through the control software or from the unit’s interface. The NEOS AXS COMPACT models are available in three different full-range models (10”, 12” and 15”) that, thanks to their asymmetric profile, can also be used as stage monitors. A compact 18” sub-woofer allows multi-way systems of various output power and frequency response to be created when combined with any of the satellites. All the models are available also in passive version, including precisely designed built-in crossover filters. Size and weight of the NEOS AXS COMPACT have been contained as much as possible in order to make their use very easy both in portable and installed systems. The NEOS AXS HIGH-PERFORMANCE models provide the highest level of performance and are intended for the use in the most demanding applications. The two full-range models (12” and 15”) feature woofers with neodymium magnets and large voice coils, capable of handling extremely high power levels, and compression drivers with exceptional linearity and efficiency. Both models are fitted with an advanced supspension system featuring FLY TRACK flying points, which allow to form multiple clusters in absolute safety. The speakers used in the two sub-woofers offer the latest in transducer technology, such as die-cast baskets with double ventilation, ISV (Interleaved Sandwich Voice Coil), DSS (Double Silicon Spider) and DDR (Double Demodulating Rings). The enclosure innovative design provides the high output level and dispersion control of a horn-loaded system, plus the damping and deep bass of a bass-re¤ ex system with a symmetrical, exponential-profile tuning port. In all the active models the remote control of all the system parameters is available thru the PRONET software. For a correct filtering, EQ and alignment of the passive versions, we recommend the use of PROEL PC260 digital processor that provides the same high-performance processing as the built-in DSP in the active versions. 35 NEOS10AXS LOUDSPEAKERS NEOS AXS SERIES • Bi-amplified digitally processed 2-way system • SPL MAX 124 dB • 1” compression driver with titanium diaphragm on a 100°>80° x 60° asymmetrical horn • Frequency response 70 Hz - 20 kHz • 10” woofer with 2” voice coil • 1000 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • 96 KHz, 40bit floating point CORE DSP • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • Compact and lightweight birch plywood asymmetrical cabinet • Dual-ange pole holder • 1 aluminum side handle • 4 x M10 flying points • Passive version available with 250 W AES power handling (NEOS10PX) • Made in Italy NEOS12AXS • Bi-amplified digitally processed 2-way system • 1” compression driver with 1.75 VC on a 100°>80° x 60° asymmetrical horn • 12” woofer with 2.5” voice coil • 1000 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • SPL MAX 127 dB • Frequency response 55 Hz - 20 kHz • Compact and lightweight birch plywood asymmetrical cabinet • Dual-ange pole holder • 2 aluminum side handles • 96 KHz, 40bit floating point CORE DSP • 4 x M10 flying points • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • Passive version available with 350 W AES power handling (NEOS12PX) • Made in Italy NEOS15AXS • Bi-amplified digitally processed 2-way system • 1” compression driver with 1.75 VC on a 100°>80° x 60° asymmetrical horn • 15” woofer with 2.5” voice coil • 1000 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • 96 KHz, 40bit floating point CORE DSP • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • SPL MAX 128 dB • Frequency response 55 Hz - 20 kHz • Compact and lightweight birch plywood asymmetrical cabinet • Dual-ange pole holder • 2 aluminum side handles • 4 x M10 flying points • Passive version available with 400 W AES power handling (NEOS15PX) • Made in Italy NEOS118AXS • Amplified digitally processed sub-woofer • Frequency response from 33 Hz • 15” woofer with 4” voice coil • Compact and lightweight birch plywood cabinet • 1500 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • Pole holder • 96 KHz, 40bit floating point CORE DSP • 2 aluminum side handles • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • Passive version available with 1000 W AES power handling (NEOS118PX) • SPL MAX 133 dB 36 • Made in Italy NEOS122AXS LOUDSPEAKERS NEOS AXS SERIES • Bi-amplified digitally processed 2-way system • 1.4” compression driver with 3” VC on a 100°>80° x 60° asymmetrical horn • SPL MAX 132 dB • Frequency response 55 Hz - 20 kHz • 12” neodymium woofer with 3” voice coil • Compact and lightweight birch plywood asymmetrical cabinet • 1500 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • Dual-ange pole holder • 96 KHz, 40bit floating point CORE DSP • 1 aluminum side handle • 4 x FLYTRACK + 1 x M10 flying points • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • Passive version available with 800 W AES power handling (NEOS122PX) • Made in Italy NEOS152AXS • Bi-amplified digitally processed 2-way system • 2” compression driver with 3” VC on a 90°>80° x 60° asymmetrical horn • 15” neodymium woofer with 4” voice coil • 2000 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • 96 KHz, 40bit floating point CORE DSP • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • SPL MAX 132 dB • Frequency response 40 Hz - 20 kHz • Compact and lightweight birch plywood asymmetrical cabinet • Dual-ange pole holder • 2 aluminum side handles • 4 x FLYTRACK + 2 x M10 flying points • Passive version available with 1000 W AES power handling (NEOS152PX) • Made in Italy NEOS215AXS • Amplified digitally processed sub-woofer • Frequency response from 40 Hz • 2 x 15” woofer with 3” voice coil • Compact and lightweight birch plywood cabinet • 1500 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • Pole holder • 96 KHz, 40bit floating point CORE DSP • 4 aluminum side + top handles • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • Passive version available with 1000 W AES power handling (NEOS215PX) • Made in Italy • SPL MAX 136 dB NEOS218AXS • Amplified digitally processed sub-woofer • Frequency response from 30 Hz • 2 x 18” woofer with 4” voice coil • Compact and lightweight birch plywood cabinet • 2000 W DA digital power amplifier with Switch Mode Power Supply (SMPS) • 96 KHz, 40bit floating point CORE DSP • Networking capability thru PRONET software with remote control of EQ, DYNAMICS and DELAY • SPL MAX 137 dB • Pole holder • 4 aluminum side + top handles • 2 x 100mm wheels • Passive version available with 2000 W AES power handling (NEOS218PX) • Made in Italy 37 LOUDSPEAKERS OPTIONAL ACCESSORIES AC171 AC172 AC 173 AC169A COVERNE10 COVERNE12 COVERNE15 COVERNE122 COVERNE152 COVERNE15S COVERNE18S NEOS10 NEOS12 NEOS15 NEOS122 NEOS152 NEOS115 NEOS118 AC172E KPTNEOS152 AC178 System type NEOS10AXS/PX NEOS12AXS/PX NEOS15AXS/PX NEOS118AXS/PX Full range 2-way, vented Full range 2-way, vented Full range 2-way, vented Sub-woofer, vented 18'' woofer - 4 VC Low frequency driver 10'' woofer - 2 VC 12'' woofer - 2.5 VC 15'' woofer - 2.5 VC High frequency driver 1'' compression driver - 1.75 VC 1'' compression driver - 1.75 VC Frequency reponse 70 Hz - 20 kHz 55 Hz - 20 kHz 50 Hz - 20 kHz from 30 Hz Horn type Asymmetrical rotatable horn Asymmetrical rotatable horn Asymmetrical rotatable horn - Coverage 100°>80° H x 60° V 100°>80° H x 60° V 100°>80° H x 60° V - Construction 15 and 18 mm birch plywood 15 and 18 mm birch plywood 15 and 18 mm birch plywood 15 and 18 mm birch plywood Finish Anti-scratch black paint Anti-scratch black paint Anti-scratch black paint Anti-scratch black paint Flying hardware 4 x M10 - top, bottom, rear 4 x M10 - top, bottom, rear 4 x M10 - top, bottom, rear 2 x M10 - top 10° 10° 10° - Monitor taper 42° 42° 42° - Pole holder 1 bottom dual angle (0° / 7.5°) 1 bottom dual angle (0° / 7.5°) 1 top Dimensions (W x H x D) 355 x 520 x 310 mm 400 x 600 x 365 mm 465 x 688 x 430 mm 600 x 610 x 600 cm NEOS118PX PASSIVE NEOS10PX NEOS12PX NEOS15PX 8 ohm 8 ohm 8 ohm 8 ohm Power handling continuous 250 W 350 W 400 W 1000 W Power handling peak 500 W 700 W 800 W 2000 W Sensitivity 97 dB @ 1 W/1 m 99 dB @ 1 W/1 m 99 dB @ 1 W/1 m 98 dB @ 1 W/1 m Passive crossover frequency 2500 Hz 2000 Hz 2000 Hz - Suggested crossover frequency - - - 80 Hz - 160 Hz Weight 16 kg (35.2 lbs) 22 kg (48.5 lbs) 27 kg (59.5 lbs) 47 kg (103.5 lbs) ACTIVE NEOS10AXS NEOS12AXS NEOS15AXS NEOS118AXS Signal Processing CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz Amplifier type DA Class D with SMPS DA Class D with SMPS DA Class D with SMPS DA Class D with SMPS Output power 500 + 500 W 500 + 500 W 500 + 500 W 1500 W Max SPL 124 dB 127 dB 128 dB 133 dB Connectors IN - LINK: XLR M - XLR F NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA) IN - LINK: XLR M - XLR F NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA) IN - LINK: XLR M - XLR F NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA) IN - LINK: 2 x XLR M - 2 x XLR F NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA) LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) TERMINATE, GND LIFT LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) TERMINATE, GND LIFT LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) TERMINATE, GND LIFT LEVEL, PRESET (80 / 120 / USER) TERMINATE, GND LIFT Cooling Variable speed DC fan Variable speed DC fan Variable speed DC fan Variable speed DC fan Input Impedance 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced Input Sensitivity +4 dBu / 1.25 V +4 dBu / 1.25 V +4 dBu / 1.25 V +4 dBu / 1.25 V Power Supply 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz Weight 18 kg (39.7 lbs) 24 Kg (52.9 lbs) 29 kg (63.9 lbs) 49.5 kg (109 lbs) 38 LOUDSPEAKERS OPTIONAL ACCESSORIES KPTTL10 KPTTL12 KPTTL15 NEOS10 NEOS12 NEOS15 USB2CAN converter KPTFL10PB KPTFL12PB KPTFL15PB KPTFL10PW KPTFL12PW KPTFL15PW NEOS10 (BLACK) NEOS12 (BLACK) NEOS15 (BLACK) NEOS10 (WHITE) NEOS12 (WHITE) NEOS15 (WHITE) PLH300 NEOS12AXS/PX NEOS152AXS/PX range 2-way, vented FullFull range 2-way, vented NEOS 215AXS/PX NEOS 215AXS/PX Sub-woofer, vented Sub-woofer, vented 12 neodymium 12 neodymium woofer -woofer 3 VC - 3 VC 1.4 compression driver - titanium diaphragm High frequency driver driver 1.4 compression driver - titanium diaphragm - 3 VC High frequency - 3 VC Frequency reponse 40 Hz - 20 kHz Frequency reponse 40 Hz - 20 kHz Horn type Asymmetrical rotatable horn Horn type Asymmetrical rotatable horn Coverage 100°>80° H x 60° V Coverage 100°>80° H x 60° V Construction 15-18mm birch plywood with Construction 15-18mm birch plywood with Finish Anti-scratch black paint Finish Anti-scratch black paint Flying hardware 4 x fly tracks - side and 1 x M10 rear Flying hardware 4 x fly tracks - side and 1 x M10 rear Trapezoidal taper 10° Trapezoidal taper 10° Monitor taper 42° Monitor taper 42° Pole holder 1 bottom dual angle (0° / 7.5°) Pole holder 1 bottom dual angle (0° / 7.5°) Dimensions (W x H x D) 410 x 600 x 360 mm Dimensions (W x H x D) 410 x 600 x 360 mm neodymium woofer 15''15'' neodymium woofer - 4-VC4 VC 2'' compression driver - titanium diaphragm 2'' compression driver - titanium diaphragm - 3 VC - 3 VC 40 Hz - 20 kHz 40 Hz - 20 kHz Asymmetrical rotatable horn Asymmetrical rotatable horn 90°>60° H x 50° V 90°>60° H x 50° V 15 and 18 mm birch plywood 15 and 18 mm birch plywood Anti-scratch black paint Anti-scratch black paint 4 x fly tracks - side and 2 x M10 rear 6 x fly tracks side and rear 10° 10° 42° 42° 1 bottom dual angle (0° / 7.5°) 1 bottom dual angle (0° / 7.5°) 450 x 770 x 490 mm 450 x 770 x 490 mm 2 x215x 15 woofer - 3-VC3 VC woofer NEOS218AXS/PX NEOS218AXS/PX Sub-woofer, ventedvented Sub-woofer, 2 x 18'' - 4 VC- 4 VC 2 xwoofer 18'' woofer from 40 Hz from 40 Hz 15-18mm birch plywood 15-18mm birch plywood Anti-scratch black paint Anti-scratch black paint 1 top - 1 side 1 top - 1 side 590 x 760 x 850 mm 590 x 760 x 850 mm from 30 Hz from 30 Hz 15, 18 and 24 mm birch plywood 15, 18 and 24 mm birch plywood Anti-scratch black paint Anti-scratch black paint 1 top - 1 side 1 top - 1 side 590 x 990 x 790 mm 590 x 990 x 790 mm PASSIVE NEOS 122PX PASSIVE NEOS 122PX Nominal impedance 8 ohm Nominal impedance 8 ohm Power handling continuous 800 W AES Full Range Power handling continuous 800 W AES Full Range Power handling peak 1600 W Power handling peak 1600 W Sensitivity 100 dB 1 W/1 m Sensitivity 100 dB 1 W/1 m Passive crossover frequency 1200 Hz Passive crossover frequency 1200 Hz Suggested crossover frequency Suggested crossover frequency Weight 24 Kg (52.9 lbs) Weight 24 Kg (52.9 lbs) NEOS152PX NEOS152PX 8 ohm 8 ohm 1000 W 1000 W 2000 W 2000 W 99 dB @ 1 W/1 m 99 dB @ 1 W/1 m 1200 Hz 1200 Hz 33 kg (72.7 lbs) 33 kg (72.7 lbs) NEOS 215PX NEOS 215PX 8 + 8 ohm 8 + 8 ohm 1000 W 1000 W 2000 W 2000 W 101 dB 1 W/1 m 101 dB 1 W/1 m 80 Hz - 125 Hz 80 Hz - 125 Hz 62.5 kg (137.7 lbs) 62.5 kg (137.7 lbs) NEOS218PX NEOS218PX 8 + 8 ohm 8 + 8 ohm 2000 W 2000 W 4000 W 4000 W 101 dB @ 1 W/1 m 101 dB @ 1 W/1 m 80 Hz - 125 Hz 80 Hz - 125 Hz 80.5 kg (177.3 lbs) 80.5 kg (177.3 lbs) ACTIVE NEOS152AXS NEOS152AXS CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz DA Class D with SMPS DA Class D with SMPS 1000 W + 1000 W 1000 W + 1000 W 132 dB 132 dB IN - LINK: XLR M - XLR F IN - LINK:INXLR M -ETHERCON® XLR F NETWORK - OUT: (NE8FAV) NETWORK IN - OUT: ETHERCON® MAIN LINK: PowerCon® (NAC3MPB)(NE8FAV) MAINPowerCon® LINK: PowerCon® (NAC3MPB) MAIN: (NAC3MPA) MAIN: PowerCon® (NAC3MPA) LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) TERMINATE, GND LIFT TERMINATE, GND LIFT Variable speed DC fan Variable speed DC fan 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced +4 dBu / 1.25 V +4 dBu / 1.25 V 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 36 kg (79.4 lb) 36 kg (79.4 lb) NEOS 215AXS NEOS 215AXS CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz DA Class D with SMPS DA Class D with SMPS 1500 W 1500 W 136 dB 136 dB IN - LINK: 2 x XLR M - 2 x XLR F IN -NETWORK LINK: 2 x XLR M - 2ETHERCON® x XLR F (NE8FAV) IN - OUT: NETWORK IN - PowerCon® OUT: ETHERCON® (NE8FAV) MAIN LINK: (NAC3MPB) MAIN LINK: PowerCon® (NAC3MPB) MAIN: PowerCon® (NAC3MPA) MAIN: PowerCon® (NAC3MPA) LEVEL, PRESET (80 / 120 / USER) LEVEL, PRESET (80 120 / USER) TERMINATE, GND/ LIFT TERMINATE, GND LIFT Variable speed DC fan Variable speed DC fan 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced +4 dBu / 1.25 V +4 dBu / 1.25 V 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 65 kg (142.2 lbs) 65 kg (142.2 lbs) NEOS218AXS NEOS218AXS CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz DA Class D with SMPS DA Class D with SMPS 2000 W 2000 W 137 dB 137 dB IN - LINK: 2 x XLR M - 2 x XLR F IN - LINK: 2 x XLRINM- -OUT: 2 x XLR F NETWORK ETHERCON® (NE8FAV) NETWORK - OUT: ETHERCON® (NE8FAV) MAININLINK: PowerCon® (NAC3MPB) MAINMAIN: LINK: PowerCon® PowerCon® (NAC3MPB) (NAC3MPA) MAIN: PowerCon® (NAC3MPA) LEVEL, PRESET (80 / 120 / USER) LEVEL,TERMINATE, PRESET (80GND / 120LIFT / USER) TERMINATE, GND LIFT Variable speed DC fan Variable speed DC fan 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced +4 dBu / 1.25 V +4 dBu / 1.25 V 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 83 kg (182.8 lbs) 83 kg (182.8 lbs) System type System type Low frequency Low frequency driver driver ACTIVE Signal Processing Signal Processing Amplifier type Amplifier type Output power Output power Max SPL Max SPL Connectors Connectors Controls Controls Cooling Cooling Input Impedance Input Impedance Input Sensitivity Input Sensitivity Power Supply Power Supply Weight Weight NEOS10AXS/PX NEOS122AXS/PX Full2-way, rangevented 2-way, vented Full range NEOS 122AXS NEOS 122AXS CORE processing 24 bit / 96 kHz CORE processing 24 bit / 96 kHz DA Class D with SMPS DA Class D with SMPS 750 + 750 W 750 + 750 W 132 dB 132 dB IN - LINK: XLR M - XLR F IN -INLINK: M - XLR F (NE8FAV) NETWORK - OUT:XLRETHERCON® NETWORK IN - OUT: ETHERCON® (NE8FAV) MAIN LINK: PowerCon® (NAC3MPB) MAIN LINK:(NAC3MPA) PowerCon® (NAC3MPB) MAIN: PowerCon® MAIN: PowerCon® (NAC3MPA) LEVEL, PRESET (FLAT / HPF / MONITOR/ USER) LEVEL, PRESET TERMINATE, GND LIFT (FLAT / HPF / MONITOR/ USER) TERMINATE, GND LIFT Variable speed DC fan Variable speed DC fan 20 kohm balanced, 10 kohm unbalanced 20 kohm balanced, 10 kohm unbalanced +4 dBu / 1.25 V +4 dBu / 1.25 V 230 VAC 50Hz or 120 VAC 60 Hz 230 VAC 50Hz or 120 VAC 60 Hz 28 Kg (61.7 lb) 28 Kg (61.7 lb) 39 LOUDSPEAKERS XEOS SERIES XEOS is a series of INSTALLATION speakers including a selected number of surface-mount and ceiling models, designed for contractors and installers looking for a wide choice of cost-effective, elegantly designed speakers with good quality sound. The elegant front baffle of the three surface-mount models, with a full protection grille and a new stylish and unobtrusive aluminium logo, allows these speakers (available in black or white) to blend perfectly in any environment. The horn-loaded dome tweeters and the carefully designed crossover filters provide a smooth and detailed response, suitable both for paging and background music applications. All the three models feature built-in line transformers and C-shaped brackets for an easy installation in vertical or horizontal position. The two square-shape 2-way ceiling models provide hi-fidelity sound and feature a low impedance input, while the round shape ceiling models offer the choice of a versatile 5” full range or a high-quality 6.5” two-way solution. XE35T / XE55T / XE65T • 2 - way surface-mount systems • 3.5”, 5” and 6.5” polypropylene woofers • Dome tweeter on elliptical waveguide • Built-in 70V/100V line transformer with power taps • Low impedance mode • C-shape metal bracket • Available in black or white 40 LOUDSPEAKERS XEOS SERIES XE65CTX / XE55CTX • Square shape 2-way coaxial ceiling systems 175 mm 145 mm • 5” and 6.5” woofers • Dome tweeter • Built-in 70V/100V line transformer with power taps • Low impedance mode • Available in white SQUARE DIE CUT XE65CT / XE51CT • Round shape ceiling systems Ø 179 mm • 5” full- range and 6.5” 2-way coaxial Ø 165 mm • Built-in 100V line transformer • Available in white HOLE DIE CUT COVER5X COVER6X Metal accessories for installation RAL 9010 color KPTSP01WH KPTSP01BK Available for XE55T and XE65T in white (KPTSP01WH) or black (KPTSP01BK) color. SNWH ABS installation bracket for XE55T (white) SNBK ABS installation bracket for XE55T (black) XE35T XE55T XE65T XE55CTX XE65CTX XE51CT XE65CT 2-way system 2-way system 2-way system 2-way system 2-way system Full-range system 2-way system HF driver 1” dome tweeter horn loaded 1” dome tweeter horn loaded 1” dome tweeter horn loaded 1” coaxial tweeter 1” coaxial tweeter - 1” coaxial tweeter LF driver 3.5” woofer 5” woofer 6.5” woofer 5” woofer 6.5” woofer 5” full-range 6.5” woofer System type Power Continuous 15 W 30 W 40 W 30 W 40 W 10 W 20 W Peak 30 W 60 W 80 W 60 W 80 W 20 W 40 W Nominal impedance Line input Connections Controls Frequency response (-10 dB) SPL (1W/1m, 1 kHz) Weight (kg) Dimensions (mm) Mounting hole (mm) Colour 8 ohm 8 ohm 8 ohm 8 ohm 8 ohm - - 70/100 V 70/100 V 70/100 V 70/100 V 70/100 V 100 V 100 V Screw terminals Screw terminals 2 x binding post Wire terminals Wire terminals Wire terminals Wire terminals 70/100 V voltage tap selector 8 ohm - 1/2/4/7.5/15 W power tap selector 70/100 V voltage tap selector 8 ohm - 1/2/5/10/30 W power tap selector 70/100 V voltage tap selector 8 ohm - 2/5/10/20/40 W power tap selector 70/100 V voltage tap selector 8 ohm - 1/2/5/15/30 W power tap selector 70/100 V voltage tap selector 8 ohm - 2/5/10/20/40 W power tap selector 2.5/5/10W power tap selector 2.5/5/10/20 W power tap selector 70-20 kHz 70-20 kHz 50 - 20 kHz 50 - 20 kHz 50 - 20 kHz 100 - 20 kHz 70 - 20 kHz 85 dB 87 dB 87 dB 87 dB 87 dB 90 dB 87 dB 1.8 2.7 3.7 1.3 1.7 1 1.2 130x198x130 181x240x172 217x288x204 170x170x63 200x200x77 Ø 191.5 - H 78 Ø 204 - H 85 - - - 145x145 175x175 Ø 165 Ø 179 black XE35TB white XE35TW black XE55TB white XE55TW black XE65TB white XE65TW white white white white 41 LOUDSPEAKERS XENIA SERIES One-piece ABS cabinet for a better strength and acoustic rigidity Aluminium weather-proof grille Contemporary and stylish design High-definition dome tweeter High-efficiency woofer with polypropylene weatherproof cone Crossover filter with selected components and high quality line transformers Wall bracket with integral connections, 120° horizontal and vertical rotation and safety wire XENIA is a series of speakers designed specifically for high-profile installed sound applications and featuring contemporary Italian styling and advanced technical solutions. All of the models in the XENIA range utilise high-definition neodymium dome tweeters and high-efficiency woofers, together with carefully designed crossover filters, providing high-fidelity, fullrange sound for a wide scope of installations where superior audio quality is a key requirement. All models include as a standard feature a 70/100 V line transformer and multiple voltage taps for a perfect integration in large distributed systems. All the surface-mount models are hosted in injection moulded high-impact ABS cabinets featuring an innovative cosmetic design, which allows the sound system to blend perfectly into any stylish environment or decor. The use of fully sealed cabinets, polypropylene woofer cones and aluminium grilles in the 3” and 5” models make them suitable for the installation in outdoor venues (IP55). The innovative wall bracket, included as standard with X30T and X50T, integrates the electrical connections and it can be pre-installed in the venue and connected to the sound system before placing the speakers. When the whole installation is completed, the speakers can be placed and connected in a flash just ‘plugging’ them into the bracket terminal. The speakers can also be secured using the provided steel safety wire. The XENIA wall bracket allows a 120° horizontal or vertical rotation, providing the optimal coverage for any position in the venue. The three surface-mount models available suit any kind of installed sound system, offering a cost effective solution for paging and background music in smallsize environments, full-range sound in bars, department stores and outdoor venues, or higher SPL systems in large areas such as shopping malls and airports. One ceiling and one in-wall model, featuring the same high-quality sound and stylish design, complete the series. 42 X30T LOUDSPEAKERS XENIA SERIES • Passive two-way, wall-mount loudspeaker system • Wall bracket with 120° horizontal/vertical rotation and integral connections • High-definition dome tweeter on elliptical waveguide • Available in black and white color • 3” woofer with PP cone • For paging and background music in environments (shops, restaurants, offices, etc.) requiring unobtrusive, small size speakers able to provide a good SPL and a high-quality sound • Ultra-compact ABS cabinet with aluminum grille • Built-in 70V / 100V line transformer • 30W power handling • Weather-proof IP55 • 7W/15W/30W/8ohm power tap selector X50T • Passive two-way, wall-mount loudspeaker system • Wall bracket with 120° horizontal/vertical rotation and integral connections • High-definition dome tweeter on elliptical waveguide • Weather-proof IP55 • 5” woofer with PP cone • Compact ABS cabinet with aluminum grille • Built-in 70V / 100V line transformer • 60W power handling • 12W/25W/50W/8ohm power tap selector • Available in black and white color • Ideal for applications requiring a fullrange sound in a limited space: bars, pubs, department stores and outdoor venues. Delivers an extended response with deep lows and clean, well-defined highs X80T • Passive two-way, wall-mount loudspeaker • C-shape metal wall bracket included • High-definition dome tweeter on elliptical • Available in black and white color • 8” woofer • Able to provide a high SPL and an amazing extension at the low frequencies, is perfect for large areas such as shopping malls, stadiums, airports or for high-power music installations • ABS cabinet with aluminum grille • Built-in 70V / 100V line transformer • 100W power handling • 25W/50W/100W/8ohm power tap selector 43 LOUDSPEAKERS XENIA SERIES X50CT • Passive two-way coaxial ceiling loudspeaker system • 1/2” high-fidelity tweeter • 5” woofer Ø 170 mm • ABS cabinet • Built-in 100V line transformer • 20W power handling • 2.5W/5W/10W power tap selector • Available in white color • For high-quality paging and background music diffusion HOLE DIE CUT X50IWT • Passive two-way in-wall mount loudspeaker system • High-definition dome tweeter on elliptical waveguide • 5” woofer with PP cone 143 mm • ABS cabinet • Built-in 100V line transformer • 40W power handling 216 mm • 8W/15W power tap selector • Available in white color • Optional INWALL05P plastic box available for flush-mounting, provides a quick and easy mounting system and a closed rear cabinet for an improved sonic performance • For top performance and high quality sound with a minimal visual impact SQUARE DIE CUT X30T X50T X80T X50IWT X50CT 1” neodymium soft dome tweeter 1/2” tweeter 5” woofer 8” woofer 5” woofer 5” woofer Speakers neodymium soft dome horn HF 1” loaded tweeter LF 3” woofer Power 44 nominal 15W 30W 50W 20 W 10W max 30W 60W 100W 40 W 20W 8 ohm 8 ohm 8 ohm - - Line input 70/100 V 70/100 V 70/100 V 100 V 100 V Connections Integral connections included in the bracket (wire terminals) Integral connections included in the bracket (wire terminals) 2 x binding post wire terminals wire terminals 70/100 V voltage tap selector 70/100 V voltage tap selector - 12/25/50W power tap 8ohm - 8/15/30W power tap selector 8ohm selector 70/100 V voltage tap selector 8ohm - 25/50/100W power tap selector 8/15W power tap selector 2.5/5/10W power tap selector Frequency response (-10 dB) 100-20k Hz 80-20k Hz 75-20k Hz 85-20k Hz 95-20k Hz SPL (1W/1m, 1 kHz) 87 dB 90 dB 91 dB 90 dB 91 dB Dimensions (mm) 12.5x19.3x12 17x28x17.5 25x42x25 17x24x8 Ø 190 - H 8 Weight (kg) 1.3 2.3 4.6 1,7 1,3 Mounting Hole (mm) - - - 143x216 Ø 170 Colour black X30TB white X30TW black X50TB white X50TW black X80TB white X80TW - - LOUDSPEAKERS ACCESSORIES AMP120XL • Constant voltage output power amplifier • 4 MIC/LINE inputs + 3 AUX inputs • Dual band tone control • Priority function on MIC 1 • 120W rated output power • 100V/70V/50V/ 4 ohm output • 24V emergency power supply • 19” rack mount kit included AUP240R • Constant voltage output power amplifier • 1 MIC input + 1 LINE input + 1 TELEPHONE input • 2-band EQ • 240W rated output power • 100V/70V/25V/16ohm/8ohm/4ohm output • 24V emergency power supply • 19” rack mountable TRL • Constant voltage (70V/100V) transformers • Allow installation of constant voltage speakers in applications using constant voltage diffusion • To be inserted between the amplifier outputs and the speaker line • 19” rack mountable • TRL150.4: four auto-transformers with 150 W input power each • TRL300.2: two auto-transformers with 300 W input power each • T2W1000: two auto-transformers with 1000 W input power each ASO25 • 2-way stereo + mono low analog crossover • Designed to optimize the performance of systems combining subwoofers and satellites • Two inputs, two HIGH outputs, two LOW outputs, one MONO LOW output • 24dB/oct. Linkwitz-Riley crossover with internally selectable frequency (80 Hz, 125 Hz, or 160 Hz) • Subsonic filter, adjustable limiter, delay lines (0, 300 μs, 600 μs) • 10 kHz “air” shelving tone control internally selectable • Optional board for user-customized parametric filters. 45 PORTABLE SOUND SYSTEMS FREEPASS10 FREEPASS10 is an all-in-one sound system combining in an ultra-portable, easy-to-use package everything musicians and other PA users need for playing: a full-featured mixer, a powerful amplifier, two full-range speakers and high-quality connection cables. FREEPASS10 is a complete PA systems that, even if compact in size, quick to setup and simple to use, is packed with a full set of features and delivers an unexpected sound quality for this kind of systems. The 8-channel, 2x250W powered mixer fits perfectly in one of the two speakers and it can be used as it is or detached with a simple operation. The second speaker includes a convenient and large compartment that can contain all the connection cables and other accessories. Two high-quality PROEL speaker cables with ultradurable 1/4” metal jack connectors are also provided. The two speakers, hosted in lightweight PP cabinets, feature a horn-loaded 1.35” VC compression driver and a 10” woofer, able to provide a clean and powerful full-range sound with high SPL. A large handle on top of the cabinet and a pole holder on the bottom make transport and installation quick and easy. Thanks to its versatility and portability, FREEPASS10 can be used in a variety of applications, such has live gigs for singers or small bands, education and sporting events, seminars and presentations. FREEPASS10 • All-in-one system with two speakers and detachable power mixer • 4 MIC/LINE MONO inputs with phantom power • 2 LINE STEREO inputs • 2-band channel EQ • ECHO / DELAY effect • MUSIC/SPEECH main EQ • 7-LED VU-METER • 2-TRACK and MONITOR out • Dual 250W CLASS D power amplifier with SMPS • 2-way speakers with 1” horn-loaded compression driver and 10” woofer • 2 x 7.5mt. PROEL power cables with metal ¼” JACK • Convenient accessory compartment 46 PORTABLE SOUND SYSTEMS FREEPASS10 MIXER Section MONO inputs (4) MIC IN (XLR-F) + LINE IN (JACK) STEREO inputs (2) LINE IN (2xJACK / 2xRCA) Input EQ HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz PHANTOM power + 15 V (CH 1-4) Dynamic Processor COMPRESSOR / LIMITER (CH 1-2) Internal Effect ECHO / DELAY (CH 1-4) Outputs MONITOR OUT (2xJACK), REC OUT (2xRCA), SPEAKER OUT (2xJACK) Main EQ VOICE / MUSIC selector Metering 2x6-LED VU-METER AMPLIFIER Section Amplifier Type Class D with SMPS (Switch Mode Power Supply) Maxium Output Power 2 x 250 W @ 4 ohm (1 KHz, 1% THD) Frequency Response MUSIC: 20 Hz - 20 KHz, VOICE: 80 Hz - 20 KHz LOUDSPEAKER Section Loudspeaker System 2-way system vented High Frequency Device 1” compression driver 1.35" VC - horn loaded Mid Frequency Device - Low Frequency Device 10” woofer with 2" VC Angular Coverage 90° H x 60° V Impedance 4 ohm Frequency Response 65 Hz - 20 kHz (-10 dB) SPL 1W 1m 95 dB Construction Black polypropylene, metal grille Handles 1 top Pole Holder GENERAL Specifications Dimensions Speaker: 50x32x29 cm / Mixer: 32x18x9 cm Weight System: 25 kg / Speaker: 10.6 kg / Mixer: 2.4 kg Power Supply 230 VAC / 120 VAC (switchable) 50/60 Hz Power consumption 400 W 47 PORTABLE SOUND SYSTEMS FREEPACK65 FREEPACK65 is an all-in-one, luggage-style sound system combining in an ultra-portable, easy-to-use package everything musicians and other PA users need for playing: a full-featured mixer with digital effect and media player, a powerful amplifier, two full-range speakers and high-quality connection cables. FREEPACK65 is a complete PA systems that, even if compact in size, quick to setup and simple to use, is packed with a full set of features and delivers an unexpected sound quality for this kind of systems. The 8-channel, 2x250W powered mixer, including a USB/SD media player with large LCD, is coupled perfectly with the two speakers in a stylish luggage-style package, making transport and installation quick and easy. A convenient and large compartment on the back of the mixer can contain all the connection cables and other accessories. Two high-quality PROEL speaker cables with ultradurable 1/4” metal jack connectors are also provided. The two speakers, hosted in lightweight PP cabinets, feature a 3-way design with 1” compression driver, two 3” midrange and two 6.5” woofer, which can provide a clean and defined sound together with an extended response. Thanks to its versatility and portability, FREEPACK65 can be used in a variety of applications, such has live gigs for singers or small bands, education and sporting events, seminars and presentations. FREEPACK65 • All-in-one luggage-style sound system with two speakers, power mixer and media player • 2x9-LED VU-METER • 7 MIC/LINE MONO inputs • Dual 250W CLASS D power amplifier with SMPS • 1 LINE STEREO input • 2-band channel EQ • 3-way speakers with 1” compression driver, 2x3” midrange and 2x6.5” woofer • 16-preset DIGITAL MULTIEFFECT • 2 x 7.5mt. PROEL power cables with metal ¼” JACK • USB/SD player with LCD display • Convenient accessory compartment 48 • 2-TRACK and PRE-AMP out PORTABLE SOUND SYSTEMS FREEPACK65 MIXER Section MONO inputs STEREO inputs Input EQ Internal Effect Outputs Metering MULTIMEDIA Section Player Type Compatible File Formats Control Interface AMPLIFIER Section Amplifier Type Maxium Output Power Frequency Response LOUDSPEAKER Section Loudspeaker System High Frequency Device Mid Frequency Device Low Frequency Device Angular Coverage Impedance Frequency Response SPL 1W 1m Construction Handles Pole Holder GENERAL Specifications Dimensions Weight Power Supply Power consumption (7) MIC IN + LINE IN (COMBO) (1) LINE IN (mini-jack / 2xRCA) HIGH: +/-15dB 10 kHz, LOW: +/- 15dB 100 Hz 16 presets DIGITAL multieffect with 1 parameter PRE-AMP OUT (2xJACK), REC OUT (2xRCA), SPEAKER OUT (4xJACK MAIN + MON) 2x6-LED VU-METER USB / SD memory slot MP3 / WAVE LCD display Class D with SMPS (Switch Mode Power Supply) 2 x 250 W @ 4 ohm (1 KHz, 1% THD) 20 Hz - 20 KHz 3-way system vented 1” dome tweeter 1" VC 2x3” midrange with 0.75" VC 2x6.5” woofer with 1.35" VC 100° H x 80° V 8 ohm 75 Hz - 20 kHz (-10 dB) 90 dB Black polypropylene, metal grille 1 top 1 bottom System: 73x21.5x55.5 cm / Speaker: 53.5x21.5x27.5 cm / Mixer: 73x21.5x36 cm System: 22.5 kg / Speaker: 8 kg / Mixer: 6.5 kg 230 VAC / 120 VAC (switchable) 50/60 Hz 300 W 49 PORTABLE SOUND SYSTEMS FREE6 / FREE10 / FREE50V3 PROEL FREE systems gives you the freedom to perform your music or play your sound anywhere without worrying about where to plug the power cord, how to connect your MP3 player or how to set your microphone. FREE6, FREE10 and FREE50V3 are battery powered combo sound systems with a full set of features and the sound you don’t expect from this kind of products. They feature a CD/DVD/MP3 player with USB port and remote control able to play not only audio but also video files, with a dedicated video output for connecting an external display. The WIRELESS modules provide a clean and hassle-free wireless connection with the included handheld microphones for the maximum freedom of movement. FREE6 and FREE10 are hosted in compact and road-proof PP cabinets that provide maximum portability and protection. FREE6, with his surprising SPL for such a compact size is the ideal system for indoor use in conferences, multimedia applications, school events and churches and in any application where an unobtrusive and ultra-portable combo system is needed. FREE10, with his 2-way configuration and his 180W power amp, is the perfect all-in-one multi-purpose system for indoor and outdoor applications requiring high-quality sound, high power output and multiple connections. An additional wireless module with the choice of handheld or bodypack transmitter with headset microphone is available as optional. FREE50V3 includes two wireless modules and a built-in AM/FM tuner for the maximum versatility. FREE6 FREE10 FREE50V3 • All-in-one battery powered sound system • All-in-one battery powered sound system • All-in-one battery powered sound system • Built-in license-free UHF wireless module (863-865 MHz) with handheld microphone • Built-in license-free UHF wireless module (863865 MHz) with handheld microphone • Two built-in VHF wireless modules with handheld microphones • CD/DVD/MP3 player with USB port, remote control and VIDEO output • CD/DVD/MP3 player with USB port, remote control and VIDEO output • CD/DVD/MP3 player with USB port, remote control and VIDEO output • 1 MONO input + 1 MONO OUTPUT • 2 MONO input + 1 MONO OUTPUT • 2 MIC inputs + 1 AUX input + 1 LINE OUTPUT • MUSIC / SPEECH selector • ECHO effect • ECHO effect • 50W built-in amplifier • 180W built-in amplifier • 80W built-in amplifier • High-quality 6.5” full-range speaker for an accurate sound reproduction • 1” horn loaded compression driver and 10” woofer for an accurate sound reproduction • 1” tweeter and 8” woofer for an accurate sound reproduction • 2/3 hours working time • 3/4 hours working time • 5/6 hours working time • Compact and light-weight PP cabinet for maximum portability • Compact and light-weight PP cabinet for maximum portability, with two wheels and one trolley-style handle • Compact and light-weight cabinet for maximum portability, with two wheels and one trolley-style handle 50 PORTABLE SOUND SYSTEMS FREE6 / FREE10 / FREE50V3 FREE KIT HANDHELD FREE KIT BODYPACK ACCESSORIES FOR FREE6 AND FREE10 RB13 ACCESSORIES FOR FREE50V3 FREE6 FREE10 FREE50V3 MONO inputs 1 x MIC IN (COMBO) 2 x MIC IN (COMBO), 1 x LINE IN (JACK) 2 x MIC IN (JACK) STEREO inputs 1 x LINE IN (2xRCA + mini-jack) 1 x LINE IN (2xRCA + mini-jack) 1 x AUX IN (2xRCA) ECHO ECHO MIXER Section Internal Effect Outputs STEREO LINE OUT (2xRCA), VIDEO OUT (RCA) STEREO LINE OUT (2xRCA + JACK), VIDEO OUT (RCA) STEREO LINE OUT (2xRCA), VIDEO OUT (RCA) Main EQ LOW/HIGH TONE control, MUSIC/SPEECH selector Wireless Receiver FR1R FR1R 2 x VHF Handheld Transmitter FR1H FR1H 2 Bodypack Transmitter FR1B (optional) FR1B (optional) RB13 (optional) Headset microphone HS1 (optional) HS1 (optional) Optional Modulation Mode FM FM FE3 Frequency Range UHF 863-865MHz UHF 863-865MHz VHF 174-223 MHz KIT A: 198.1/205.5 MHz - KIT B: 199.1/219.0 MHz KIT C: 196.1/207.0 MHz Frequency Stability 0.0005% 0.0005% 0.0005% Sensitivity 95dB 95dB 95dB Adjacent Channel Rejection S/N >40dB S/N >40dB S/N >40dB AF output 80dB 80dB 80dB Distortion <85dB <85dB <90dB Player Type DVD Player with USB port DVD Player with USB port DVD Player with USB port Compatible File Formats Audio CD, MP3, M4A, Video DVD, DIVX, JPG Audio CD, MP3, M4A, Video DVD, DIVX, JPG Audio CD, MP3, M4A, Video DVD, DIVX, JPG Control Interface LCD display, REMOTE control LCD display, REMOTE control LCD display, REMOTE control Continuous Power 30W 100W 80W Maxium Output Power 50W 180W 150W Distortion 1% ( at 10W ) 1% ( at 10W ) 1% ( at 10W ) Full-range system 2-way system 2-way system 1" horn loaded compression driver 1" tweeter WIRELESS section FREE6 MULTIMEDIA Section AMPLIFIER Section LOUDSPEAKER Section Loudspeaker System High Frequency Device Mid Frequency Device FREE10 6.5" full-range Low Frequency Device 10" woofer 8" woofer Frequency Response 50Hz - 15KHz, -3dB 50Hz - 18KHz, -3dB 80Hz - 18KHz, -3dB Construction Polypropylene cabinet, metal grille Polypropylene cabinet, metal grille, 2 wheels Painted MDF cabinet, metal grille, 2 wheels Handles 1 top 1 top, 1 trolley style 1 trolley style Pole Holder Dimensions 22x32x22 cm 34x52x38 cm 30x40x26 cm Weight 6.5 kg / 14.3 lbs 19.5 kg / 42.9 lbs 18 kg / 39.7 lbs Recharge Battery 1 x 12V/ 5A 2 x 12V/ 7A 1 x 18V/ 7.5A Battery Recharging Time 7-10 hours 10-12 hours 8-10 hours Battery Working Time 2-3 hours 3-4 hours 5-6 hours Power Supply 12VDC, 6A with EXTERNAL POWER ADAPTER Selectable 117V/230V AC input, 12-24V DC input Selectable 115V/230V AC input, 18V DC input GENERAL Specifications FREE50V3 51 CONDENSER MICROPHONES Thanks to the high standards reached by acoustic engineering and electronic technology applied to audio reproduction, sound reinforcement systems nowadays can offer high fidelity as well as top quality performance. The use of condenser microphones becomes more and more widespread as, in most cases, they are the ideal solution for audio acquisition. Such an evolution in this field has created new condenser microphone user profiles, featuring very similar choice criteria. At the top of the list of the indispensable features we find transparency, durability and high quality/ price ratio, the very elements at the base of our condenser microphone design, meant to meet either the needs of professional stage use or of home recording. LDF410 CM602 • 1” diaphragm, externally polarized condenser capsule • Permanently polarized condenser capsule (back electret) • Compact design for stage use on drums, guitar cabinets, cymbals and brass instruments • Light and rugged construction • Excellent multi-use microphone in the recording studio • Particularly suited as an overhead for drums and percussion, for the hi-hat, wood wind and brass instruments, guitar Transducer type Polar pattern Frequency response (+/-3dB) Sensitivy 1 Khz Maximum SPL for 1% THD Equivalent noise Level S/N ratio Impedance Recommended Load Impedance Powering Connector Weight Dimensions single-diaphragm pressure gradient 34 mm cardiod 20 - 20000 Hz -38 dB +/-2dB 130 dB 20 dB (A weighted ) 70 dB < 200 Ohm > 1000 Ohm + 48 vdc Phantom 3 pin Male XLR 224 g L.133mm x 50,2 mm FREQUENCY RESPONSE 52 CARDIOD • High applicable SPL for close miking on stage Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD Equivalent noise Level S/N ratio Impedance Recommended Load Impedance Powering Connector Weight Dimensions back electret condenser Uni-directional 50 - 18000 Hz -45 dB +/-3dB 130 dB <22 dB (A weighted ) >70 dB ≤ 250 Ohm > 1000 Ohm + 48 vdc Phantom 3 pin Male XLR 240 g L.135 mm x 23 mm FREQUENCY RESPONSE UNI-DIRECTIONAL CONDENSER MICROPHONES LDF147 LDF320 • 1” diaphragm externally polarized condenser capsule • Permanently polarized condenser microphone • FET output stage • High gain with clear and natural sound • Internally selectable, -6 dB/oct. @ 100 Hz low-cut filter • Light-weight and rugged construction • Adjustable metal suspension is included. • Designed for overhead applications in churches and concert halls • For general use in home-studio applications Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD Filter Equivalent noise Level S/N ratio Impedance Recommended Load Impedance Powering Connector Weight Dimensions single-diaphragm pressure gradient 32 mm cardiod 20 - 20000 Hz -40 dB +/-2dB (14 mv/Pa) 140 dB HPF -6dB at 100 Hz internally switchable 24 dB (A weighted ) 76 db < 200 Ohm > 1000 Ohm + 48 vdc Phantom 3 pin Male XLR 326 g L.152 mm x 45 mm Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD S/N ratio Impedance Powering Connector Weight Dimensions Back electrect cardiod 20 - 20000 Hz -40 dB 130 dB >65 db 75 Ohm + 48 vdc Phantom; 1,5 Volt 3 pin Male XLR 110 g L.170 mm x 30 mm CARDIOD CARDIOD FREQUENCY RESPONSE FREQUENCY RESPONSE 53 DYNAMIC MICROPHONES For many applications there is no substitute for the extreme durability and high feedback rejection of a dynamic microphone: the concert stage where sound levels can be extremely high, the karaoke bar where the person holding the mic often doesn’t know that pointing it at the speakers can be a bad thing. Even in the recording studio, dynamic microphones are still found in front of guitar cabinets, inside bass drums and for close miking snare drums and tom-toms. PROEL has been keeping these applications in mind when designing this series of dynamic microphones. DM580 DM585 • Professional microphone with Humbucking dynamic capsule • High-sensitivity, professional microphone with dynamic capsule • High applicable SPL • High applicable SPL • Cardioid polar pattern and reduced sensitivity for the use with high stage monitor levels • Cardioid polar pattern particularly resistant to feedback • Tailored frequency response specifically for vocals. • Frequency response and natural bass roll-off for close vocal miking and reducing handling noise • Particularly tailored to female vocal applications Transducer type Polar Pattern Frequency response (±3dB) Sensitivity 1kHz SPL for 1% THD Impedance Recommended Load Impedance Connector Weight Dimensions Moving Coil Cardioid 50 Hz-16 kHz 1.75mV/Pa Maximum 137dB ≤400Ω ≥1.5kΩ 3 Pin Male XLR 301 g L. 164 mm x 51 mm Dia. CARDIOD 54 Transducer type Polar Pattern Frequency response (±3dB) Sensitivity 1kHz SPL for 1% THD Impedance Connector Weight Dimensions Moving Coil Cardioid 50 Hz-17 kHz -52 dBv +/-3dB 135dB 400 ohm 3 Pin Male XLR 320 g L. 180 mm x 44 mm Dia. CARDIOD DYNAMIC MICROPHONES DM226 DM220 • Dynamic Cardioid Microphone • Vocal microphone with dynamic capsule • Vocal microphone with dynamic capsule • Frequency response tailored specifically for vocal applications • Cardioid polar pattern • Flat and extended frequency response. • Uniform cardioid pattern for isolating the main sound source and avoiding feedbacks • Exceptional transparency at mid-bass frequencies • Flat and extended frequency response • Durable metal construction • Ergonomic barrel design • Exceptional transparency at mid-bass frequencies, DM580LC • On/off switch for on-stage control • ON/OFF switch • Ergonomic barrel design • Steel mesh ball grille with integral filter for reducing wind noise • 4.5 mt XLR cable included Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD S/N ratio Impedance Connector Weight Dimensions CARDIOD Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD S/N ratio Impedance Recommended Load Impedance Connector Weight Dimensions CARDIOD Moving coil Cardioid 50 - 15000 Hz -53 dB +/-3dB 135 dB 74 dB < 600 Ohm > 1500 Ohm 3 pin XLR male 360 g L.180 mm x 45 mm Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD Impedance Recommended Load Impedance Connector Weight Dimensions Moving coil Cardioid 50 - 15000 Hz -53 dB +/-3dB 135 dB < 600 Ohm > 1500 Ohm 3 pin XLR male 360 g L.180 mm x 45 mm CARDIOD 55 DYNAMIC MICROPHONES DM55 DM800 DM800kIT • Satin chrome-plated die-cast casing for pure vintage look and feel. • Kit made of three DM800 dynamic microphones • Flat and extended frequency response • Includes three microphone clamps • Frequency response tailored for vocals and instrumental music • ON/OFF switch • Padded plastic case for storage and transport • Internal shock mount for reduced handling noise • On-off switch • Designed for optimal warmth and clarity • Excellently accurate pickup pattern provides the best gain before feedback. • Self-tensioning swivel mount Transducer type Polar Pattern Frequency response Sensitivity Maximum SPL per 1%THD S/N Ratio Impedance Recommended Load Impedance Connector Weight Dimensions CARDIOD 56 Moving coil Cardiod 50-16Khz 1,8 mv/Pa at 1Khz 130 db (at 1Khz ≤1% T.H.D ) >65 db 300 Ohm >1000 ohm 3 pin xlr male gold plated pins 485 g 185 mm. X 56 mm X 67 mm Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD Impedance Connector Weight Dimensions CARDIOD Moving coil Cardioid 60 - 14000 Hz -53 dB +/-3dB 130 dB 600 Ohm 3 pin XLR male 360 g L.180 mm x 45 mm Transducer type Polar pattern Frequency response ( +/- 3 dB ) Sensitivy 1 Khz Maximum SPL for 1% THD Impedance Connector Weight Dimensions CARDIOD DYNAMIC MICROPHONES DM1 DM12 • Professional dynamic drum microphone • Professional dynamic instrument microphone • Cardioid polar pattern for an accurate sound reproduction without unnecessary back ground noise • Frequency response tailored for percussions, snares and toms and other instruments • Low frequency extension • Fast transient response • High gain before feedback • Designed to be used with bass drums, bass guitar cabs, tubas and other low frequency instruments. • Internal shock mount for reduced handling noise • Internal shock mount for reduced handling noise • Compact design reduces stage clutter • Durable metal construction with hardened steel mesh grille • Hardened steel mesh grille Package for miking up a 8 piece drumset includes a convenient ABS carrying case DMH8XL • 5pcs drum kit • 8pcs drum kit • Includes: DM12 DM1 CM602 APM47 • ABS carrying case DMH5XL 1pc 4pcs 3pcs 4pcs • Includes: DM12 DM1 CM602 APM47 1pc 3pcs 1pcs 3pcs • ABS carrying case 57 INSTALLATION MICROPHONES PROEL installation microphones have been designed to meet the most common requirements in installed sound applications. The series includes a low-profile unidirectional microphone, a gooseneck microphone and a highquality, battery-powered microphone with two polar patterns, which can also be used for interviews. The range is completed by two microphone bases. MFC81 MIC62W • Shotgun style condenser microphone • Low-profile condenser microphone • Permanently polarized capsule • Permanently polarized condenser capsule • Switchable cardioid / uni-directional polar pattern • Hemispherical directional polar pattern • Switchable sensitivity for shotgun or handheld applications (switch OFF/NORMAL/TELE) • Integral phantom power adapter • Phantom / battery powering • Recommended for conference tables, podiums, ticket windows and theater stages • Combines the advantages of a half shotgun with those of a handheld interview microphone Transducer type Polar Pattern Frequency response (±3dB) Sensitivity 1kHz SPL for 1% THD Impedance Recommended Load Impedance Connector Weight Dimensions CARDIOD 58 Back electrect Cardioid / Uni-directional 100 Hz-20 kHz -45 dBv ± 3 db; -38 dBv ± 3 db 130dB 1000 ohm 2300 ohm 3 Pin Male XLR 120 g L. 360 mm x 21 mm Dia. UNI-DIRECTIONAL Back electret condenser Cardioid 60 Hz - 16 Khz - 48 dB ± 3 db ( 0 dB = 1VPa @ 1 Khz ) 600Ω SPL 105 db ( at 1 Khz < 1% THD ) 67 dB ( 1 Khz @ 1 Pa ) 9 V - 48 V DC 10 mt 0,25 ( without cable ) 75 x 100 x 20 mm White Element Polar patner Frequency response Sensibility Output impedance Max input S/N Ratio Operate voltage Cable length Weight( Kg) Dimension Color CARDIOD INSTALLATION MICROPHONES MGN24 BMG2 • Gooseneck condenser microphone • Die-cast zinc base • High-pass filter • Phantom power supply • 50cm gooseneck with one flexible section • Flexible stem • Ideal applications include conference rooms, altars and podiums • Ring light • On/off switch Trasducer type Polar pattern Frequency response (+/- 3 dB) Sensitivity 1 Khz Maximum SPL for 1% THD Equivalent noise Level S/N ratio Filter Impedance Recommended Load Imp. Powering Connector Weight Dimensions Pre-Polarized back plate electret condenser Cardioid 50 - 16000 Hz -45 dB +/-3dB 132 dB <18 dB (A weighted ) > 60 dB High-pass , -6dB at 150 Hz < 250 Ohm > 1000 Ohm + 48 vdc Phantom 3 pin XLR male 125 g L.499 mm x 21 mm CARDIOD FREQUENCY RESPONSE Element back Polar pattern Frequency response Sensibility Output impedance Power supply Microphone length Weight( Kg) Base dimension Colour FREQUENCY RESPONSE Back electret condenser Uni-directional 40 Hz - 16 Khz - 40 dB ± 3 db ( 0 dB = 1VPa @ 1 Khz ) 75Ω Phanton power 48 V DC/ DC3 V battery 445 mm. 0,73 115 x 140 x 30 mm Black UNI-DIRECTIONAL MB100BK • Universal desktop console for gooseneck microphones. • Can be used with any PROEL mixer or integrated amplifier • Scratch-proof plastic housing • XLR-3P input connector and standard XLR output connector • ON/OFF button • Requires phantom power 59 HEADSET & LAVALIER MICROPHONES The progress in microphone technology has brought to a gradual reduction of transducer dimensions, thus microphones can now be so small that it is difficult to spot them. Our Lavalier and Headset Series mics are the ideal solution for use with either PROEL or any other manufacturer’s wireless systems. HCM10V2 • Electret condenser headset microphone • Cardioid polar pattern • 3 adaptors included( AD4SH-AD3SE-AD3AK) • Replaceable cable • Designed to be used by singers, actors and showmen in applications when the microphone must be ‘invisible’ Transducer type Polar pattern Frequency response Sensitivity Maximum SPL per 1%THD Equivalent Noise Level Impedance Recommended load impedance Powering Connector Weight Back electret condenser Cardioid 20-20Khz -35db+- 3db 130 db 20db-A 2000 Ohm >2000 ohm 1,5 -10 V D.C mini XLR 4-pin, mini JACK 3.5 mm, mini XLR 3-pin 25 g CARDIOID HCM08PRO • Very small size and super light-weight flexible miniature microphone • 3.5 mm condenser capsule with omni-directional polar pattern • Double vent protection system for use in theatre and spoken word applications • Comfortable and secure fit • 3 adaptors included( AD4SH-AD3SE-AD3AK) 60 Transducer type Polar pattern Frequency response Sensitivity Output impedance Max.Input SPL S/N Ratio Power supply Cable Dimension Accessories Connectors(Changeable) Weight Back electret condenser Omni-directional 20Hz- 20KHz -45dB± 3dB 1500Ω± 30% 130dB >70dB 1.5V-10V Φ1.5*1.2M Φ3mm Metal Windscreen 3.5mm plug · 3-pin mini XLR · 4-pin mini XLR 25 g OMNIDIRECTIONAL HEADSET & LAVALIER MICROPHONES HCM23 • Very small size and super light-weight flexible miniature microphone • 5 mm permanently polarized condenser capsule with omni-directional polar pattern • Double vent protection system for use in theatre and spoken word applications • Comfortable and secure fit with fixed bi-aural headband • Anti-pop screen • Available either with 3.5 mm jack (code HCM23SE), 4-pin mini-XLR (code HCM23) or with 3-pin mini-XLR (code HCM23AK) Transducer type Polar pattern Frequency response Sensitivity Output impedance Max.Input SPL Power supply Cable Dimension Available Connectors Weight OMNI-DIRECTIONAL Back electret condenser Omni-directional 20Hz- 20KHz -45dB± 3dB 1500Ω± 30% 130dB 1.5V-10V Ø1.5*1.2M Ø5mm 3.5mm plug (HCM23SE)-3-pin mini XLR (HCM23AK)-4-pin mini XLR (HCM23) 25 g HCM38 • Light but sturdy high-quality condenser headset microphone • Permanently polarized condenser capsule • Cardioid polar pattern • Perspiration-resistant • Ideal for singers, MCs, and aerobics instructors • Available either with 3.5 mm jack (code HCM38SE) or with 4-pin mini-XLR (code HCM38) Transducer type Polar Pattern Frequency response Sensitivity Maximum SPL per 1%THD Equivalent Noise Level Impedance Recommended Load Impedance Powering Connector Weight Back electret condenser Cardiod 80-14Khz -65db+- 3db 135 db 18db-A 680 Ohm >2000 ohm 1,5 -3 V D.C mini jack 3,5mm.( hcm38se) mini xlr 4 pole ( hcm38) 51 g CARDIOID 61 HEADSET & LAVALIER MICROPHONES HCS20 • Miniature condenser microphone • 8 mm permanently polarized condenser capsule. • Cardioid polar pattern • Phantom adapter • Built-in windscreen (additional external windscreen included) • Designed for on-stage use with instruments, specifically saxophone, clarinet, trombone, trumpet. Transducer type Polar Pattern Frequency Response Sensitivity Output Impedance Max.Input SPL S/N Ratio Power Supply Cable Color Accessories Back electret condenser Cardioid 50Hz- 16KHz -45dB± 3dB 250Ω± 30% 130dB >70dB Phantom 48V Ø2x1M Black Windscreen CARDIOID HCS30 • Miniature condenser clip microphone • Cardioid polar pattern • High gain before feedback • Open and natural sound • Wireless compatible • Designed to be used with most of the acoustic instruments HCSB • Available clip mounts for different acoustic instruments (optional): HCSA: cello - HCSD: guitar HCSA Clip mount for cello 62 HCS30 ( HCSB and HCSC included) HCSD Clip mount for guitar Transducer type Polar Pattern Frequency Response Sensitivity Output Impedance Max.Input SPL S/N Ratio Power Supply Cable Color Accessories Back electret condenser Cardioid 50Hz- 16KHz -45dB± 3dB 2000 ohm ± 30% 130dB >70dB Phantom 48V Ø2x1M Black Windscreen HCSC Clip mount for violin Clip mount for sax CARDIOID LCH370 HEADSET & LAVALIER MICROPHONES • High-quality miniature broadcast lavalier microphone • Flat frequency response and wide dynamic range • 6.5 mm permanently polarized condenser capsule • Cardioid polar pattern • 3 standard adaptors (AD4SH-AD3SEAD3AK) for use with most of the professional wireless systems currently available • Anti-pop screen Transducer type Polar Pattern Frequency response Sensitivity Maximum SPL per 1%THD S/N Ratio Impedance Recommended Load Impedance Powering Connector Weight Back electret condenser Cardioid 20-20Khz -45db+- 3db 130 db >70db 1500 Ohm >2000 ohm 1,5 -10 V D.C mini jack 3,5mm, mini xlr 4 pole mini xlr 3 pole 15 g CARDIOID LCH200 • Omni-directional miniature lavalier microphone’s • 5 mm permanently polarized condenser capsule • Omni-directional polar pattern • Tie-clip microphone • Anti-pop screen • Available with 4-pin mini-XLR connector • Particularly suited for actors and MCs in combination with wireless systems of the RMW Series Transducer type Polar pattern Frequency response Sensitivity Maximum SPL per 1%THD Equivalent noiselevel Impedance Recommended load impedance Powering Connector Weight Back electet condenser Omni-directional 20-20Khz -40db+- 3db 130 db 19 db-A 1000 ohm >2000 ohm 1,5 -9 V D.C mini xlr 4 pole 10 g OMNI-DIRECTIONAL LCM1 • Omni-directional lavalier microphone • Permanently polarized condenser capsule • Omni-directional polar pattern • Ideal for MCs or worship leaders. Transducer type Polar pattern Frequency response (±3dB) Sensitivity 1kHz Maximum SPL for 1% THD Impedance load impedance Powering Connector Weight Dimensions Back plate electret Condenser Omni-directional 80Hz-16kHz 2mV/Pa 128dB 680Ω ≥3k ohm 1.5-7V DC 3.5mm threaded MiniJack 5g 10mm Ø x 25mm OMNI-DIRECTIONAL 63 WIRELESS MICROPHONES RWM1000 • PLL UHF Wireless Microphone System • Diversity antenna • 638 - 662 Mhz frequency range • Up to 8 systems usable in the same location • 50 meter / 160 feet range • 50 Hz - 15 KHz frequency response • IR sync • -105 dB signal / noise ratio • ABS carrying and storage case • 480 selectable channels RMW1M Transmitter type Frequency range Frequency stability Modulation Method Audio Frequency response Thd Dynamic range S/N ratio RF outpit power Current drain Tone pilot frequency Mic capsule Battery Autonomy Dimension Weight 64 PLL synthesized UHF 638-662 Mhz 0,01% FM ( 3 ) 50 Hz – 15 Khz < 1% ≥ 100 dB ≥ 90 dB 10 mW 160 mA 30 ~ 33 Khz Dynamic 2 x 1,5 Volt “AA” type 8 hours 250 (H) x 35 ( Dia ) mm 0,29 Kg RMW1000 RMW1H Receiver type Frequency range Frequency stability Modulation Method Audio Frequency response Thd Dynamic range sensitivity Output level Power supply Dimension Weight Transmitter type Frequency range Frequency stability Modulation Method Audio Frequency response Thd Dynamic range S/N ratio RF output power Current drain Tone pilot frequency Microphone Condenser Battery Autonomy Dimension Weight PLL synthesized UHF 638-662 Mhz 0,01% FM ( 3 ) 50 Hz – 15 Khz < 0,8% ≥ 100 dB -105 dB for 12dB SINAD -13 dBv Balanced -2dBv unbalanced ¼ jack Dc 12-18 Volt 150 mA 197( L) x 134(D) x 42(H) mm 0,820 Kg PLL synthesized UHF 638-662 Mhz 0,01% FM ( 3 ) 50 Hz – 15 Khz < 1% ≥ 100 dB ≥ 90 dB 10 mW 160 mA 30 ~ 33 Khz Headset 2 x 1,5 Volt “AA” type 8 hours 64 ( L) x 19(D) x 108 (H) mm 0,10 Kg WIRELESS MICROPHONES RWM1000 SYSTEMS RWM1000M RMW1000 RMW1M RWM1000H RMW1000 RMW1H 65 WIRELESS MICROPHONES WM600 • PLL UHF Wireless Microphone System • Low-profile desktop receiver with two foldable antennas • 863 - 865 Mhz frequency range • 4 selectable frequency channels • 30 meter / 100 feet range • Up to 4 systems usable in the same location • 50 Hz - 15 KHz frequency response • ABS carrying and storage case • -105 dB signal / noise ratio WM6M RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 66 WM6H WM600 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 23,5 (W) x 5 (D) x 5 (H) Receiver Type Frequency Range RF Frequency Stability RF Image /spurious Rej. RF Interference Reject. RF Sensibility Audio Frequency response THD Dynamic Range S/N ratio Output Connector Power Supply Dimensions PLL UHF 4 channel UHF 863~865 Mhz 0,002% >70 db >70db -105db 50 Hz ~ 15KHz <1% > 100db >105db Balanced XLR Unbalanced 1/4” jack DC 13-15 V DC / 300mA 17,5(W) x 13,5(D) x 4,5(H) RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 10 (W) x 6,5 (D) x 3 (H) WIRELESS MICROPHONES WM600 SYSTEMS WM600 WM6M WM600M WM600 WM6H LWM1 HWM1 WM600H 67 WIRELESS MICROPHONES WM600D • PLL UHF Dual Channel Wireless Microphone System • Low-profile desktop receiver with two foldable antennas • 863 - 865 Mhz frequency range • 4 selectable frequency channels • 30 meter / 100 feet range • Up to 2 systems usable in the same location • 50 Hz - 15 KHz frequency response • ABS carrying and storage case • -105 dB signal / noise ratio WM6M RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 68 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 23,5 (W) x 5 (D) x 5 (H) WM600D WM6H Receiver Type Frequency Range RF Frequency Stability RF Image /spurious Rej. RF Interference Reject. RF Sensibility Audio Frequency response THD Dynamic Range S/N ratio Output Connector RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions Power Supply Dimensions PLL UHF 4 channel UHF 863~865 Mhz 0,002% >70 db >70db -105db 50 Hz ~ 15KHz <1% > 100db >105db Balanced XLR Unbalanced 1/4” jack DC 13-15 V DC / 300mA 17,5(W) x 13,5(D) x 4,5(H) 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 10 (W) x 6,5 (D) x 3 (H) WIRELESS MICROPHONES WM600D SYSTEMS WM600D WM6M WM600DM WM6H WM600D LWM1 HWM1 LWM1 HWM1 WM600DH WM600D WM6H WM6M WM600DKIT 69 WIRELESS MICROPHONES WM202 • UHF Channel Wireless Microphone System • -105 dB signal / noise ratio • 863 - 865 Mhz frequency range • Low-profile desktop receiver with two foldable antennas • 30 meter / 100 feet range • Up to 4 systems usable in the same location • 50 Hz - 15 KHz frequency response • ABS carrying and storage case WM2M RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 70 WM2H WM200 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 23,5 (W) x 5 (D) x 5 (H) Receiver Type Frequency Range RF Frequency Stability RF Image /spurious Rej. RF Interference Reject. RF Sensibility Audio Frequency response THD Dynamic Range S/N ratio Output Connector Power Supply Dimensions UHF BAND UHF 863~865 Mhz 0,002% >70 db >70db -105db 50 Hz ~ 15KHz <1% > 100db >105db Balanced XLR Unbalanced 1/4” jack DC 13-15 V DC / 300mA 17,5(W) x 13,5(D) x 4,5(H) RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 10 (W) x 6,5 (D) x 3 (H) WIRELESS MICROPHONES WM202 SYSTEMS WM202 WM2M WM202M WM202 WM2H LWM1 HWM1 WM202H WM202 WM2M WM2H LWM1 HWM1 WM202KIT 71 WIRELESS MICROPHONES WM202D • UHF Dual Channel Wireless Microphone System • -105 dB signal / noise ratio • 863 - 865 Mhz frequency range • Low-profile desktop receiver with two foldable antennas • 30 meter / 100 feet range • Up to 4 systems usable in the same location • 50 Hz - 15 KHz frequency response • ABS carrying and storage case WM2M RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 72 WM2H WM200D 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 23,5 (W) x 5 (D) x 5 (H) Receiver Type Frequency Range RF Frequency Stability RF Image /spurious Rej. RF Interference Reject. RF Sensibility Audio Frequency response THD Dynamic Range S/N ratio Output Connector Power Supply Dimensions UHF DUAL CHANNEL UHF 863~865 Mhz 0,002% >70 db >70db -105db 50 Hz ~ 15KHz <1% > 100db >105db Balanced XLR Unbalanced 1/4” jack DC 13-15 V DC / 300mA 17,5(W) x 13,5(D) x 4,5(H) RF Frequency Band Frequency Stability Modulation Method RF Max deviation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 863~865 Mhz 0,00002 FM(F3E) ± 40 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 10 (W) x 6,5 (D) x 3 (H) WIRELESS MICROPHONES WM202D SYSTEMS WM202D WM2M WM202DM WM202D WM2H LWM1 HWM1 WM202DH 73 WIRELESS MICROPHONES WM100 • VHF Wireless Microphone System • 95 dB audio dynamic range • 175 - 216 Mhz frequency range • Low-profile desktop receiver with two foldable antennas • 30 meter / 100 feet range • Up to 6 systems usable in the same location • 50 Hz - 15 KHz frequency response • ABS carrying and storage case WM2M RF Frequency Band Frequency Stability Modulation Method RF Modulation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 74 WM200D 174~216 Mhz 0,00002 FM(F3E) > 30 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 28,3(W) x 5(D) x 5(H) Receiver Type Frequency Range RF Frequency Stability RF Image Rection RF Interference Reject. RF Sensibility Audio Frequency response THD Dynamic Range S/N ratio Output Connector Power Supply Dimensions VHF BAND VHF 174~216 Mhz 0,00002 -75 db >70db -105db 50 Hz ~ 15KHz <1% > 100db >70db Balanced XLR Unbalanced 1/4” jack DC 13-15 V DC / 200mA 17,5(W) x 13,5(D) x 4,5(H) WM2H RF Frequency Band Frequency Stability Modulation Method RF Modulation Audio Frequency response Spurious Emission RF Power Power Supply Dimensions 174~216 Mhz 0,00002 FM(F3E) > 30 Khz 50 Hz ~ 15KHz Under limits EN 300422 < 10 dbm 2 x 1,5 V Alkaline bat. 10(W) x 6,5(D) x 3(H) WIRELESS MICROPHONES WM100 SYSTEMS WM100 WM1M WM100M WM100 WM1H LWM1 HWM1 WM100H WM100 WM1M WM1H LWM1 HWM1 WM100KIT 75 IN/EAR MONITOR RM3000 RM3000 • • • • • • • • RM3000R ½ rack unit transmitter in a metal chassis 16 selectable frequencies (PLL synthesized) Audio level indicators (L&R) Channel selector and display Headphone output Audio input level control Combo inputs (Jack or XLR) Selectable mono or stereo mode Frequency Range Channel Oscillation Mode Maximum Deviation Range Frequency Stability Modulation Mode Transmission Power uhf 540~790 ; 863~865 mhz 16 selectables pll synthesized 70khz ±0.005% (0°C~+60°C) fm stereo modulation low: <10mw, middle: <50mw,high: <100mw ( depending on national rules ) Spurious Rejection <4nw Frequency Response 50hz~15khz(±3db) T.H.D. <1% (at 1khz, max. deviation) Audio Input line level×2, xlr/6.3mmø phone combo socket Audio Output xlr phone jack×2 Earphone Output 6.3mmø stereo phone jack with adjustable volume Earphone Output Impedance 16 ohm Output Power (32Ω) 2×100mw @ 1khz (thd 3%) Amplifier Gain low/high: -10db Antenna Connector tnc (50 ohm impedance) Power Supply dc 12~18v • • • • • • • • EB10 Bodypack receiver LCD display plus RF and AF indicators Battery level indicator Headphone output 2x100 mW @ 16 ohm Selectable limiter Selectable mono or stereo mode >6 hours of use from 2 x 1 V battery EB10 earphones included • Comfortable, form-fitting expansion foam completely isolates the ear from external sound • Extended frequency response Frequency Range Bandwidth Channel Oscillation Mode Maximum Deviation Range Frequency Stability Modulation Mode Receiving Mode Rf Receiving Sensitivity Squelch Level T.H.D. Maximum S/N Ratio Frequency Response Stereo Separation Output Jack Output Power (32Ω) Earphone Impedance Power Supply Operating Time Frequency Response Sensitivity Impedance Distortion Cable Plug Diameter Weight RM3000 uhf 540~790 ; 863~865 mhz 24mhz 16 selectables pll synthesized 70khz ±0.005% (0°C~+60°C) fm stereo modulation singel receiving -110dbm(s/n:12db) unchangeable <0.5% @ 1khz 90dba(a weighted) 50hz~15khz(±3db) >45db @ 1khz 3.5mmø stereo earphone jack 2×100mw @ 1khz (thd 3%) 16 ohm 2 aa batteries 8 hours (under moderate volume) RM3000R EB10 RM3000TR RM3000R 76 EB10 RM3000R 10 Hz- 20kHz ± 3dB 112dB/mW 16 ohm <0.3% 1.2m from 3.5 mm to 6.5 mm 7g MICROPHONES ACCESSORIES UHFSPLIT Professional active antenna splitter/booster, splits the signal received from the two ‘master’ antennas to four diversity channels. When used in combination with four multi-frequency RMW10 receivers, it forms a high-sensitivity, 4-channel receiving system. The package includes no. 2 SIGNAL BOOSTERS. Frequency band: 620 - 790 MHz Connectors: INPUT: 2 x TNC, OUTPUT: 8 x TNC Dimensions: 483 x 44 x 250 mm / 1U Input Impedance: 50 ohms Output Impedance: 50 ohms Power Supply: 12-18 V DC Input/output gain: +3 dB ANT700 Wideband design for use with RMW1000 System. Improves RF signal gain by 4db. Frequency Range : Effective Working Angle : Antenna Impedance : Antenna Gain : Connector: Weight: Dimensions: 470 ~ 700Mhz 70 degree 50Ω 4db TNC 400g L. 295 mm. X 260 mm. X 5 mm RMADRK2 RMADRK1 Rackmount kit (1U) for 1 PROFESSIONAL SERIES wireless receiver. Rackmount kit (1U) for 2 PROFESSIONAL SERIES wireless receivers. HCMBAG XLR4P WS3BE 77 ICON LEGEND OMNIDIRECTIONAL Equally sensitive to sound from all directions. CARDIOID Picks up the most sound in front of the microphone and some from the sides. HYPERCARDIOID Provides maximum isolation from ambient noise and adjacent sound. DYNAMIC Simple, rugged diaphragm/coil. Handles extreme volume levels without distortion. CONDENSER Lightweight, sensitive diaphragm. Precisely and smoothly captures sound nuances. Powered by battery or phantom power supply. VOCAL Microphone suitable for singing. SPEAK Microphone suitable for vocal applications. PERCUSSIONS INSTRUMENTS Microphone suitable for drums and percussions. BRASS INSTRUMENTS Microphone suitable for wind instruments. 78 ALPHABETICAL INDEX CODE PAGE CODE PAGE CODE PAGE AC169A 38 DM580LC 55 HPD4004 21 AC171 38 DM585 54 HPX1200 19 AC172 38 DM800 56 HPX2400 19 AC172E 38 DM800KIT 56 HPX2800 19 AC173 38 DMH5XL 57 HPX4600 19 AC178 38 DMH8XL 57 HPX6000 19 ANT700 77 FLASH12AV2 27 HPX900 19 ASO25 45 FLASH12HDA 28 KPTFL10PB 39 CM602 52 FLASH12PV2 27 KPTFL10PW 39 COVERFL12 29 FLASH15AV2 27 KPTFL12 29 COVERFL15 29 FLASH15HDA 28 KPTFL12PB 39 COVERFL8 29 FLASH5A 28 KPTFL12PW 39 COVERNE10 38 FLASH5P 28 KPTFL15 29 COVERNE12 38 FLASH8AV2 27 KPTFL15PB 39 COVERNE122 38 FLASH8PV2 27 KPTFL15PW 39 COVERNE15 38 FREE10 50 KPTFL5 29 COVERNE152 38 FREE6 50 KPTFL5W 29 COVERNE15S 38 FREEKITBODYPACK 51 KPTFL8 29 COVERNE18S 38 FREEKITHANHELD 51 KPTNEOS152 38 COVERV10 25 FREEPACK65 49 KPTSP01BK 41 COVERV12 25 FREEPASS10 47 KPTSP01WH 41 COVERV15 25 GF29 9 KPTTL10 39 CPWD10 33 HCM08PRO 60 KPTTL12 39 CPWD12 33 HCM10V2 60 KPTTL15 39 CPWD15 33 HCM23 61 KPTV10 25 DB1A 11 HCM38 61 KPTV12 25 DB1P 11 HCMBAG 77 KPTV15 25 DB2A 11 HCS20 62 LCH200 63 DIRECT100A 12 HCS30 62 LCH370 63 DIRECT100P 12 HCSA 62 LCM1 63 DM1 57 HCSB 62 LDF320 53 DM12 57 HCSC 62 LDF410 52 DM220 55 HCSD 62 LDU147 53 DM226 55 HPAMP104 13 M1622USB 8 DM55 56 HPAMP106 14 M602FX 7 DM580 54 HPD2004 21 M822USB 7 79 ALPHABETICAL INDEX CODE PAGE CODE PAGE MB100BK 59 PC260 16 WM202H 70 MFC81 58 PHANTOM100 13 WM202KIT 70 MGN24 59 PLH300 39 WM202M 70 MI10 5 PSU110 14 WM600DH 68 MI12 5 RM3000R 76 WM600DKIT 68 MI6 5 RM3000TR 76 WM600DM 68 NEOS10AXS 36 RMADRK1 77 WM600H 67 NEOS10PX 36 RMADRK2 77 WM600M 67 NEOS118AXS 36 RWM1000H 64 WS3BE 77 NEOS118PX 36 RWM1000M 64 X30TB 43 NEOS122AXS 36 S180SE 77 X30TW 43 NEOS122PX 36 SDC670 9 X50CT 44 NEOS12AXS 36 SPLIT100 13 X50IWT 44 NEOS12PX 36 SW110A 31 X50TB 43 NEOS152AXS 36 SW110P 31 X50TW 43 NEOS152PX 36 SW115A 31 X80TB 43 NEOS15AXS 36 SW115HAV2 30 X80TW 43 NEOS15PX 36 SW115P 31 XE35TB 40 NEOS215AXS 36 SW118A 31 XE35TW 40 NEOS215PX 36 SW118HAV2 30 XE35TW 40 NEOS218AXS 36 SW118P 31 XE51CT 41 NEOS218PX 36 TRL150.4 45 XE55CTX 41 PA AMP120XL 45 TRL300.2 45 XE55TB 40 PA AUP240R 45 TUBE100USB 14 XE65CT 41 PA BMG2 59 USB2CAN 39 XE65CTX 41 PA COVER5X 41 V10A 24 XE65TB 40 PA COVER6X 41 V12A 24 XE65TW 40 PA FREE50V3 50 V15A 24 XLR4P 77 PA INWALL05P 44 WD10A 33 PA MIC62W 58 WD12A 33 PA SNBK 29 WD15A 33 PA SNBK 41 WM100H 74 PA SNWH 29 WM100KIT 74 PA SNWH 41 WM100M 74 PA T2W1000 45 WM202DH 72 PA UHFSPLIT 77 WM202DM 72 80 CODE PAGE SSCAT13 REV. 01 0413 • Tutte le specifiche possono essere variate senza alcuna notifica • Design and specifications subject to change without any notice • E’ vietata la riproduzione fotostatica e fotografica del presente catalogo, o di parti di esso, in mancanza di espressa autorizzazione da parte di Proel S.p.a. • The photostatic and photograhic reproduction of this catalogue, in whole or in part, is strictly prohibited without the prior written consent of Proel S.p.A NOTES 81 NOTES 82
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
© 2021