Jablotron OASiS JA-82T User manual

Below you will find brief information for USB interface OASiS JA-82T. The JA-82T USB interface is an easy-to-use device that allows you to connect your Jablotron OASiS control panel to your computer (USB port). The interface uses HID standard, so no driver installation is needed. The circuits are opto-isolated for preventing disturbing signals between control panel and PC. It also supports direct text transfer from OLink to the JA-81F wireless keypad.

PDF Download
Document
Jablotron OASiS JA-82T User manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Easy to use
  • HID standard interface
  • No driver installation
  • Opto-isolated circuits
  • Direct text transfer to JA-81F wireless keypad

Frequently asked questions

You can use a standard USB cable with a length of up to 5 meters.

Using a CT-04 cable, the maximum length is 10 meters. For twisted cable, the maximum length is 100 meters.

No, the JA-82T uses HID standard, so no driver installation is needed.
ALP: {x-default=https://manualzz.com/doc/19733627/jablotron-oasis-ja-82t-usb-interface-user-manual, en=https://manualzz.com/doc/en/19733627/jablotron-oasis-ja-82t-usb-interface-user-manual, et=https://manualzz.com/doc/et/19733627/jablotron-oasis-ja-82t-usb-interface-user-manual}
Preparing document for printing…
0%