CMP-EHUB25

CMP-EHUB25
ETHERNET 8 PORT SWITCH
5
ETHERNET-SWITCH MIT
8 ANSCHLÜSSEN
8
COMMUTATEUR ETHERNET 8 PORTS
14
COMMUTATORE ETHERNET A 8 PORTE
17
CONMUTADOR ETHERNET
DE 8 PUERTOS
23
8 PORTIN ETHERNET-KYTKIN
29
8PORTOVÝ ETHERNETOVÝ PŘEPÍNAČ
32
SWITCH ETHERNET CU 8 PORTURI
ENGLISH
Desktop or shelf installation
When installing the switch on a desktop or shelf, attach these cushion feet on the
bottom at each corner of the device. Allow enough ventilation space between the
device and the objects around it.
Power supply
The switch can be used with 110-240VAC/50-60Hz input, DC9V/600mA output.
Connecting the switch
PC to switch
A PC can be connected to the switch via a two-pair category 5 UTP/STP straight
cable. The PC (equipped with a RJ-45 10/100Mbps jack) can be connected to
any of the ports. According to the connected network cards, the LEDs indicate at
which speed the card operates. If the LED indicators do not light up after making
a proper connection, check the PC’s LAN card, the cable, switch conditions and
connections. The LED indicator lights up after you’ve made a proper connection.
HUB to switch
A HUB (10/100Base-T) can be connected to the switch via a two-pair category
5 UTP/STP straight cable. Connect a cable to the hub’s uplink (MDI-II) port to any
of the switch’ ports (MDI-X).
Hub without uplink (MDI-II) port
If the hub is not equipped with an uplink (MDI-II) port, you make a connection
using either a straight cable or a crossover cable (see Appendix B, Technical
Specifications for cable requirements).
Using straight cable
When using a straight cable, the connection can be made from the uplink (MDI-II)
port of the switch to any port of the hub.
Using crossover cable
When using a crossover cable, the connection can be made from any port of the
switch to any port of the hub.
Switch to switch (other devices)
The switch can be connected to another switch or device (router, bridge, etc.)via a
two-pair category 5UTP/STP straight or crossover cable.
Using straight cable
When using a straight cable, this is done from the uplink (MDD-II) port of the switch
to any of the 10Mbps or 100Mbps (MDI-X) ports of the other switch or device.
Using crossing cable
When using a crossover cable, this is done from any (MDI-X) port of the switch to
any the 10Mbps or 100Mbps(MDI-X)port of the other switch or device.
NOTE: The first twisted-pair port (port 1x) is shared with the uplink port. If you
connect a hub to the uplink port, then do not use port 1x.
2
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC ’s-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: [email protected]
Declare that product:
Brand:
König Electronic
Model:
CMP-EHUB25
Description:
Ethernet 8 port switch
Is in conformity with the following standards
EN55022: 1998+A1: 2000+A2: 2003
EN61000-3-2: 2000
EN61000-3-3: 1995+A1: 2001
EN55024: 1998+A1: 2001+A2: 2003
And complies with the requirements of the European Union Directives
89/336/EEC.
‘s-Hertogenbosch, 31-03-09
Mrs. J. Gilad
Purchase Director
3
Safety precautions:
To reduce risk of electric shock, this
product should ONLY be opened by an
authorized technician when service is
required. Disconnect the product from mains and other equipment if a
problem should occur. Do not expose the product to water or moisture.
CAUTION
Maintenance:
Clean only with a dry cloth. Do not use cleaning solvents or abrasives.
Warranty:
No guarantee or liability can be accepted for any changes and
modifications of the product or damage caused due to incorrect use of
this product.
General:
Designs and specifications are subject to change without notice.
All logos brands and product names are trademarks or registered
trademarks of their respective holders and are hereby recognized as
such.
Keep this manual for future reference.
Attention:
This product is marked with this symbol. It means that used
electrical and electronic products should not be mixed with
general household waste. There is a separate collections
system for these products.
Copyright ©
4
5
6
7
8
Mme. J. Gilad
Directrice des Achats
9
Copyright ©
10
11
Mevr. J. Gilad
Directeur inkoop
12
doek.
Gebruik
geen
Copyright ©
13
14
15
Copyright ©
16
17
18
19
20
21
Copyright ©
22
-
240
VAC/50
-
60
Hz:n
ja
23
Mrs. J. Gilad
Ostojohtaja
24
Copyright ©
25
26
Fru. J. Gilad
Inköpsdirektör
27
Copyright ©
28
29
30
31
32
33
PERICOL DE
ELECTROCUTARE
NU-L DESCHIDEŢI!
Copyright ©
34
35
Declaration of conformity
We,
Nedis B.V.
De Tweeling 28
5215MC ’s-Hertogenbosch
The Netherlands
Tel.: 0031 73 599 1055
Email: [email protected]
Declare that product:
Brand:
König Electronic
Model:
CMP-EHUB25
Description:
Ethernet 8 port switch
Is in conformity with the following standards
EN55022: 1998+A1: 2000+A2: 2003
EN61000-3-2: 2000
EN61000-3-3: 1995+A1: 2001
EN55024: 1998+A1: 2001+A2: 2003
And complies with the requirements of the European Union Directives
89/336/EEC.
‘s-Hertogenbosch, 31-03-09
Mrs. J. Gilad
Purchase Director
36
37
38
39
40