advertisement
▼
Scroll to page 2
of
23
DMX Split 4X 4-fold DMX-splitter Für weiteren Gebrauch aufbewahren! Keep this manual for future needs! Gardez ce mode d’emploi pour des utilisations ultérieures! Guarde este manual para posteriores usos. © Copyright Nachdruck verboten! Reproduction prohibited! Réproduction interdit! Prohibida toda reproducción. MULTI-LANGUAGE-INSTRUCTIONS Inhaltsverzeichnis / Table of contents Sommaire / Contenido 1. INTRODUCTION ........................................................................................................................................... 8 2. SAFETY INSTRUCTIONS ............................................................................................................................ 8 3. OPERATING DETERMINATIONS.............................................................................................................. 10 4. DESCRIPTION ............................................................................................................................................ 11 4.1 Features ................................................................................................................................................. 11 4.2 Overview ................................................................................................................................................ 11 4.3 Installation .............................................................................................................................................. 12 4.4 DMX-512 connection ............................................................................................................................. 12 5. CLEANING AND MAINTENANCE ............................................................................................................. 13 6. TECHNICAL SPECIFICATIONS................................................................................................................. 13 70064815_V_1_0.DOC DMX Split 4X 4-fach Splitter 70064815_V_1_0.DOC 4/23 70064815_V_1_0.DOC 5/23 70064815_V_1_0.DOC 6/23 70064815_V_1_0.DOC 7/23 70064815_V_1_0.DOC USER MANUAL DMX Split 4X 4-fold DMX-splitter CAUTION! Keep this device away from rain and moisture! Unplug mains lead before opening the housing! For your own safety, please read this user manual carefully before you initially start-up. Every person involved with the installation, operation and maintenance of this device has to - be qualified - follow the instructions of this manual - consider this manual to be part of the total product - keep this manual for the entire service life of the product - pass this manual on to every further owner or user of the product - download the latest version of the user manual from the Internet 1. INTRODUCTION Thank you for having chosen a EUROLITE DMX Split 4X. You will see you acquired a powerful and versatile device. Unpack your DMX Split 4X. Before you initial start-up, please make sure that there is no damage caused by transportation. Should there be any, consult your dealer and do not use the device. 2. SAFETY INSTRUCTIONS CAUTION! Be careful with your operations. With a dangerous voltage you can suffer a dangerous electric shock when touching the wires! This device has left our premises in absolutely perfect condition. In order to maintain this condition and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written in this user manual. Important: Damages caused by the disregard of this user manual are not subject to warranty. The dealer will not accept liability for any resulting defects or problems. 8/23 70064815_V_1_0.DOC If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch it on immediately. The arising condensation water might damage your device. Leave the device switched off until it has reached room temperature. Please make sure that there are no obvious transport damages. Should you notice any damages on the A/C connection cable or on the casing, do not take the device into operation and immediately consult your local dealer. This device falls under protection-class I. The power plug must only be plugged into a protection class I outlet. The voltage and frequency must exactly be the same as stated on the device. Wrong voltages or power outlets can lead to the destruction of the device and to mortal electrical shock. Always plug in the power plug least. The power plug must always be inserted without force. Make sure that the plug is tightly connected with the outlet. Never let the power-cord come into contact with other cables! Handle the power-cord and all connections with the mains with particular caution! Never touch them with wet hands, as this could lead to mortal electrical shock. Never modify, bend, strain mechanically, put pressure on, pull or heat up the power cord. Never operate next to sources of heat or cold. Disregard can lead to power cord damages, fire or mortal electrical shock. The cable insert or the female part in the device must never be strained. There must always be sufficient cable to the device. Otherwise, the cable may be damaged which may lead to mortal damage. Make sure that the power-cord is never crimped or damaged by sharp edges. Check the device and the power-cord from time to time. If extension cords are used, make sure that the core diameter is sufficient for the required power consumption of the device. All warnings concerning the power cords are also valid for possible extension cords. Always disconnect from the mains, when the device is not in use or before cleaning it. Only handle the power-cord by the plug. Never pull out the plug by tugging the power-cord. Otherwise, the cable or plug can be damaged leading to mortal electrical shock. If the power plug or the power switch is not accessible, the device must be disconnected via the mains. If the power plug or the device is dusty, the device must be taken out of operation, disconnected and then be cleaned with a dry cloth. Dust can reduce the insulation which may lead to mortal electrical shock. More severe dirt in and at the device should only be removed by a specialist. There must never enter any liquid into power outlets, extension cords or any holes in the housing of the device. If you suppose that also a minimal amount of liquid may have entered the device, it must immediately be disconnected. This is also valid, if the device was exposed to high humidity. Also if the device is still running, the device must be checked by a specialist if the liquid has reduced any insulation. Reduced insulation can cause mortal electrical shock. There must never be any objects entering into the device. This is especially valid for metal parts. If any metal parts like staples or coarse metal chips enter into the device, the device must be taken out of operation and disconnected immediately. Malfunction or short-circuits caused by metal parts may cause mortal injuries. Keep away children and amateurs! Never leave this device running unattended. 9/23 70064815_V_1_0.DOC 3. OPERATING DETERMINATIONS This device is a DMX-splitter for splitting a DMX-chain. This product is only allowed to be operated with an alternating current of 230 V, 50 Hz and was designed for indoor use only. Do not shake the device. Avoid brute force when installing or operating the device. When choosing the installation-spot, please make sure that the device is not exposed to extreme heat, moisture or dust. There should not be any cables lying around. You endanger your own and the safety of others! This device must never be operated or stockpiled in sourroundings where splash water, rain, moisture or fog may harm the device. Moisture or very high humidity can reduce the insulation and lead to mortal electrical shocks. When using smoke machines, make sure that the device is never exposed to the direct smoke jet and is installed in a distance of 0.5 meters between smoke machine and device. The room must only be saturated with an amount of smoke that the visibility will always be more than 10 meters. The ambient temperature must always be between -5° C and +45° C. Keep away from direct insulation (particularly in cars) and heaters. The relative humidity must not exceed 50 % with an ambient temperature of 45° C. This device must only be operated in an altitude between -20 and 2000 m over NN. Never use the device during thunderstorms. Over voltage could destroy the device. Always disconnect the device during thunderstorms. Operate the device only after having familiarized with its functions. Do not permit operation by persons not qualified for operating the device. Most damages are the result of unprofessional operation! Please use the original packaging if the device is to be transported. Please consider that unauthorized modifications on the device are forbidden due to safety reasons! Never remove the serial barcode from the device as this would make the guarantee void. If this device will be operated in any way different to the one described in this manual, the product may suffer damages and the guarantee becomes void. Furthermore, any other operation may lead to dangers like shortcircuit, burns, electric shock, etc. 10/23 70064815_V_1_0.DOC 4. DESCRIPTION 4.1 Features 4-fold DMX-splitter Dmx distributor with one input and four output • Absolute electric isolation between input and output, or between output and output • Two types of DMX connector (3 pin & 5 pin) for each individual channel • Every DMX output features an independent driver, data & data-indicator • DMX switch is incorporated allowing isolation from the malformation caused by DMX input • Input and output with a set of respective power supply and 500 mA internal fuse 4.2 Overview Front panel 1. Power ON/OFF 2. DMX Out-sockets, 3- and 5-pin XLR-plug 3. Link Out/Terminate-switch Rear panel 4. DMX In-sockets, 3- and 5-pin XLR-plug 5. DMX Out-sockets, 3- and 5-pin XLR-plug 11/23 70064815_V_1_0.DOC 4.3 Installation Install the device on a plane surface or install it in your rack. Rack-installation: This device is built for 19" racks (483 mm). The rack you use should be a Double-DoorRack where you can open the frontpanel and the rear panel. The rack should be provided with a cooling fan. When mounting the device into the rack, please make sure that there is enough space around the device so that the heated air can be passed on. Steady overheating will damage your device. You can fix the device with four screws M6 in the rack. 4.4 DMX-512 connection The DMX-splitter can either be connected directly to the lighting controller or after a series of DMX-devices. You can connect up to 31 DMX-devices to every DMX output socket.. If you connect the splitter after a DMX-device the number of DMX-devices before the splitter must not exceed 31. The wires must not come into contact with each other, otherwise the fixtures will not work at all, or will not work properly. Only use a stereo shielded cable and 3-pin or 5-pinXLR-plugs and connectors in order to connect the controller with the fixture or one fixture with another. Occupation of the XLR-connection: Caution: At the last fixture, the DMX-cable has to be terminated with a terminator. Solder a 120 Ω resistor between Signal (–) and Signal (+) into a 3-pin XLR-plug and plug it in the DMX-output of the last fixture. After you connected the device to the mains, the DMX Split 4X is ready for use. 12/23 70064815_V_1_0.DOC 5. CLEANING AND MAINTENANCE DANGER TO LIFE! Disconnect from mains before starting maintenance operation! We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents! There are no servicable parts inside the device. Maintenance and service operations are only to be carried out by authorized dealers. Should you need any spare parts, please use genuine parts. Should you have further questions, please contact your dealer. 6. TECHNICAL SPECIFICATIONS Power supply: Power consumption: DMX 512-output: Dimensions (LxWxH): Weight: 230 V AC, 50 Hz ~ 20 W 3-pin or 5-pin XLR-connector 483 x 190 x 44 mm 3 kg Please note: Every information is subject to change without prior notice. 24.02.2006 © 13/23 70064815_V_1_0.DOC DMX Split 4X DMX-splitter 4 fois ATTENTION! 70064815_V_1_0.DOC 70064815_V_1_0.DOC 16/23 70064815_V_1_0.DOC 1. Power ON/OFF 2. Sortie DMX, fiche XLR à 3 pôles ou 5 pôles 3. Touche Link Out/Terminate 17/23 70064815_V_1_0.DOC 18/23 70064815_V_1_0.DOC MANUAL DEL USUARIO 19/23 70064815_V_1_0.DOC 20/23 70064815_V_1_0.DOC 70064815_V_1_0.DOC 22/23 70064815_V_1_0.DOC 5. LIMPIEZA Y MANTENIMIENTO ¡PELIGRO DE MUERTE! 23/23 70064815_V_1_0.DOC
advertisement
Related manuals
advertisement
Languages
Only pages of the document in English were displayed