DeWalt DW9091, DW9096, DC9096, DC9091, DC9096-2, DC9071 Operating instructions

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS
OR ANY D E WALT PRODUCT, CALL US TOLL FREE AT
1-800-4-DEWALT (1-800-433-9258).
The batteries in your new battery pack are not fully charged! First read
the safety instructions, then follow charging notes and procedures.
Important Safety Instructions
WARNING: When using electric tools, basic safety precautions should always be followed to reduce risk of fire,
electric shock, and personal injury, including the following:
READ ALL INSTRUCTIONS
• Do not incinerate the battery pack even if it is severely damaged or is completely worn out. The battery pack can explode
in a fire.
• A small leakage of liquid from the battery pack cells may
occur under extreme usage or temperature conditions. This
does not indicate a failure. However, if the outer seal is broken
and this leakage gets on your skin:
a. Wash quickly with soap and water.
b. Neutralize with a mild acid such as lemon juice or vinegar.
c. If battery liquid gets into your eyes, flush them with clean water
for a minimum of 10 minutes and seek immediate medical
attention. (MEDICAL NOTE: The liquid is 25-35% solution of
potassium hydroxide.)
• Charge the battery packs only in DEWALT chargers.
• DO NOT splash or immerse in water or other liquids.
• Do not store or use the tool and battery pack in locations
where the temperature may reach or exceed 105°F (40˚) (such
as outside sheds or metal buildings in summer).
• DO NOT probe pack with conductive objects.
• Maintain clean and open vent holes.
NOTE: Review and observe all of the Important Charging Notes in
the DEWALT charger instruction manual.
DANGER: Never attempt to open the battery pack for any reason.
If battery pack case is cracked or damaged, do not insert into charger. Electric shock or electrocution may result. Damaged battery
packs should be returned to service center for recycling.
CAUTION: Battery pack must be securely attached to tool. If battery pack is detached, personal injury may result.
NOTE: Battery storage and carrying caps are provided
for use whenever the battery is out of the tool or charger.
Remove cap before placing battery in charger or tool.
WARNING: Do not store or carry battery so that
metal objects can contact exposed battery terminals.
For example, do not place battery in aprons, pockets, tool
boxes, product kit boxes, drawers, etc., with loose nails, screws, keys,
etc. without battery cap. Transporting batteries can possibly cause
fires if the battery terminals inadvertently come in contact with
conductive materials such as keys, coins, hand tools and the
like. The US Department of Transportation Hazardous Material
Regulations (HMR) actually prohibit transporting batteries in
commerce or on airplanes (i.e., packed in suitcases and carry-on
luggage) UNLESS they are properly protected from short circuits. So
when transporting individual batteries, make sure that the battery
terminals are protected and well insulated from materials that could
contact them and cause a short circuit.
The RBRC™ Seal
The RBRC™ (Rechargeable Battery Recycling
Corporation) Seal on the nickel-cadmium battery (or
battery pack) indicates that the costs to recycle the battery (or battery pack) at the end of its useful life have
already been paid by DEWALT. In some areas, it is ille-
gal to place spent nickel-cadmium batteries in the trash or municipal
solid waste stream and the RBRC program provides an environmentally conscious alternative.
RBRC™ in cooperation with DEWALT and other battery users, has
established programs in the United States to facilitate the collection
of spent nickel-cadmium batteries. Help protect our environment and
conserve natural resources by returning the spent nickel-cadmium
battery to an authorized DEWALT service center or to your local retailer for recycling. You may also contact your local recycling center for
information on where to drop off the spent battery.
RBRC™ is a registered trademark of the Rechargeable Battery Recycling
Corporation.
Three Year Limited Warranty
DEWALT will repair, without charge, any defects due to faulty materials or workmanship for three years from the date of purchase. This
warranty does not cover part failure due to normal wear or tool abuse.
For further detail of warranty coverage and warranty repair information, visit www.dewalt.com or call 1-800-4-DEWALT (1-800-4339258). This warranty does not apply to accessories or damage
caused where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other rights
which vary in certain states or provinces.
In addition to the warranty, DEWALT tools are covered by our:
1 YEAR FREE SERVICE
DEWALT will maintain the tool and replace worn parts caused by normal use, for free, any time during the first year after purchase.
2 YEARS FREE SERVICE ON XRP™ BATTERY PACKS
DC9096, DC9091 and DC9071
90 DAY MONEY BACK GUARANTEE
If you are not completely satisfied with the performance of your
DEWALT Power Tool, Laser, or Nailer for any reason, you can return
it within 90 days from the date of purchase with a receipt for a full
refund – no questions asked.
FREE WARNING LABEL REPLACEMENT: If your warning labels
become illegible or are missing, call 1-800-4-DEWALT for a free
replacement.
PARA REPARACIÓN Y SERVICIO DE SUS HERRAMIENTAS
ELÉCTRICAS, FAVOR DE DIRIGIRSE AL CENTRO DE
SERVICIO MÁS CERCANO
CULIACAN, SIN
Av. Nicolás Bravo #1063 Sur - Col. Industrial Bravo
(667) 7 12 42 11
(33) 3825 6978
(55) 5588 9377
MERIDA, YUC
Calle 63 #459-A - Col. Centro
(999) 928 5038
MONTERREY, N.L.
Av. Francisco I. Madero No.831 - Col. Centro
(81) 8375 2313
PUEBLA, PUE
17 Norte #205 - Col. Centro
(222) 246 3714
QUERETARO, QRO
Av. Madero 139 Pte. - Col. Centro
(442) 214 1660
SAN LUIS POTOSI, SLP
Av. Universidad 1525 - Col. San Luis
(444) 814 2383
(871) 716 5265
(229) 921 7016
DEWALT Battery and Charger Systems
Battery
Output
Cat Number Voltage
DW0242
24
DC9096
18
DW9096
18
DW9098
18
DW9099
18
DC9091
14.4
DW9091
14.4
DW9094
14.4
DC9071
12
DW9071
12
DW9072
12
DW9050
12
DW9061
9.6
DW9062
9.6
DW9048
9.6
DW9057
7.2
DW9106 DW9118
X
X
X
X
X
X
X
X
X
X
90
115
45
90
60
60
90
115
60
90
45
60
40
X
60
90
45
60
40
X
45
60
DW9107 DW9108
X
X
X
60
X
60
X
30
X
45
60
60
45
45
30
30
60
60
45
45
30
30
X
X
45
45
30
30
X
X
30
30
12 Volts
DW9116
X
60
60
30
45
60
45
30
60
45
30
X
45
30
X
30
DW9216 DW9117 DW911
X
X
X
60
20
60
60
20
60
30
12
30
45
15
45
60
20
60
45
15
45
30
12
30
60
20
60
45
15
45
30
12
30
X
X
X
45
15
45
30
12
30
X
X
X
30
12
30
DC011 DW0249
X
60
60
X
60
X
30
X
45
X
60
X
45
X
30
X
60
X
45
X
30
X
X
X
45
X
30
X
X
X
30
X
DW0246 DW9109
60
X
X
60
X
60
X
30
X
45
X
60
X
45
X
30
X
60
X
45
X
30
X
X
X
45
X
30
X
X
X
30
X Indicates that the battery pack is not compatible with that specific charger.
X indique que le bloc-piles n’est pas compatible avec ce chargeur.
Una “X” indica que el paquete de baterías no es compatible con ese determinado cargador.
All charge times are approximate. Actual charge time may vary.
Read the instruction manual for more specific information.
Les durées de charge sont approximatives; la durée de charge rélle peut varier.
Lire le manuel d’utilisation pour obtenir des renseignements plus précis.
El tiempo de duración de carga es aproximado; la duración de carga real puede variar.
Lea el manual de instrucciones para obtener información más precisa.
DEWALT Industrial Tool Co., 701 East Joppa Road, Baltimore, MD 21286
(JUL04-CD-1)
Form No. 383298-07
Copyright © 2003, 2004 DEWALT
The following are trademarks for one or more DEWALT power tools: the yellow and black color scheme; the “D” shaped air intake grill; the array
of pyramids on the handgrip; the kit box configuration; and the array of lozenge-shaped humps on the surface of the tool.