Roadstar CDR-4230MP Instruction manual

Roadstar CDR-4230MP Instruction manual
R
PORTABLE STEREO MW/FM/FM-STEREO
WITH CD/CD-R/CD-RW/MP3 PLAYER.
CDR-4230MP
Instruction manual
Bedienungsanleitung
Manuel d’instructions
Manuale d’istruzioni
Manual de instrucciones
Manual de instruções
R
is a registered Trademark of Roadstar S.A. - Switzerland All rights reserved
CDR-4230MP
INDEX
TOP VIEW
English
Deutsch
Français
Italiano
Español
Portuguès
Page
Seite
Page
Pagina
Página
Pagina
1
9
17
25
33
41
1
18
3
9
8
4/5
2
6
Fi
g.
.
ig
F
21 15
FRONT VIEW
Your new unit was manufactured and assembled •
under strict ROADSTAR quality control.
Thank-you for purchasing our product for your music
enjoyment.
Before operating the unit, please read this instruction manual carefully. Keep it also handy for further
future references.
•
•
•
19
16
12
17
14
23
13
7
22
24
20
10
English
1
WARNINGS
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
CLASS 1
LASER PRODUCT
The lightening flash with arrowhead symbol within the triangle is a warning sign alerting the user of “dangerous voltage” inside the unit.
Please read this instruction manual carefully and familiarize yourself with your new Radio
Cassette/CD/USB/MMC Player before using it for the first time. Please retain this manual
for future reference.
To reduce the risk of electric shock, do not remove the cover. No user
serviceable parts inside the unit. Refer all servicing to
qualified personnel.
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to
possible eye injury.
This unit operates on 230V ~ 50Hz. If the unit is not used for a long period
of time, remove the plug from the AC mains.
Ensure all connections are properly made before operating the unit.
This unit should be positioned so that it is properly ventilated. Avoid
placing it, for example, close to curtains, on the carpet or in a built-in
installation such as a bookcase.
Do not expose this unit to direct sunlight or heat radiating sources.
+
-
+
CDR-4230MP
Portable Stereo with CD/CD-R/CD-RW/MP3 player.
This unit must not be exposed to moisture or rain.
-
English
The exclamation point within the triangle is a warning sign alerting the
user
of
important
instructions
accompanying
the
product.
Invisible laser radiation when the unit is opened or interlocks defeated.
Avoid
exposure
to
laser
beam.
Use
of
controls,
adjustments or procedures other than those specified herein may result
in hazardous radiation exposure.
230v~
2
Make sure all batteries are inserted according to the proper
polarity. Do not mix old batteries with new ones.
If the unit is not used for a long period of time (more than 1 month),
remove all batteries from their compartment to avoid possible leaking.
Playability of self-made CDs on Roadstar CD drive mechanisms.
CD-R/CD-RW in CD-DA and in MP3 format can be played back. However it can
occur, due to differences in the quality of the media as well as the characteristics
of the recording, that individual self-made CDs cannot be read. This does not
indicate an incorrect function of the playback unit in these cases.
INSTRUCTION MANUAL
LOCATION OF CONTROLS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21.
22.
23.
FM Antenna
CD Compartment
AM/FM Band Selector
Dial Scale
Tuning Control
CD Open / Close corner
Speakers
Volume Control
Function Switch (RADIO/OFF/CD-MP3)
Phones Jack
CD Program / P-mode button
CD Forward Skip/Search Button ()
CD Reverse Skip/Search Button ()
LCD Display
FM Stereo indicator
CD Play/pause Button
Handle
CD Stop Button
Battery Compartment
Power ON Indicator
+/+10 Folder Button
-/-10 Folder Button
AC-230V Power
English
3
4
English
CONNECTING TO POWER
Before switching on make sure that the voltage of your electricity supply is the same as
that indicated on the rating plate.
For your own safety read the following instructions carefully before attempting to connect
this unit to the mains.
1.
2.
3.
4.
Antenna
For FM reception there is a built-in telescopic FM antenna (1) at the rear of the unit. Extend
the antenna and move it around to obtain the best reception.
For MW reception the signals are picked up through a built-in ferrite antenna. Your may have
to orient the unit to obtain the best reception.
This unit is designed to operate on AC 230V 50Hz current only. Connecting it to other
power sources may damage the unit.
Caution
To prevent electric shock disconnect from the mains before removing cover. No user
serviceable parts inside. Refer servicing to qualified service personnel.
Safety Precaution
Do not allow this unit to be exposed to rain or moisture.
Mains Supply: AC230Volts / 50Hz - AC only
This symbol means that this unit is double insulated. An earth connection is not
required.
Set the Function Selector (9) to AM or FM RADIO position.
Tune to the desired radio station by turning the Tuning control (5).
Adjust the Volume (8) control to the desired level.
To turn off the radio, set the Function Selector (9) to the OFF position.
FM Stereo and Mono Reception
When an FM signal is tuned in, setting the BAND selector (4) to the FM position will enable the
broadcasting to be received in stereo sound. The FM Stereo indicator (16) will light up.
COMPACT DISC OPERATION
•
To remove a disc from its storage case, press down on the centre of the case and lift the
disc out, holding it carefully by the edges.
•
Fingerprints and dust should be carefully wiped off the disc's recorded surface with a
soft cloth. Unlike conventional records, compact discs have no grooves to collect dust
and microscopic debris so gently wiping with a soft cloth should remove most particles.
Wipe in a straight line from the inside to the outside of the disc. Small dust particles and
light stains will have absolutely no effect on reproduction quality.
Never use chemicals such as record sprays, antistatic sprays, benzine, or thinners to
clean compact discs. These chemicals can irreparably damage the disc’s surface.
Discs should be returned to their cases after use. This avoids serious scratches that
could cause the Laser pickup to skip.
Do not expose discs to direct sunlight, high humidity, or high temperatures for extended
Remove the stereo carefully from the box, retaining the packaging for future use.
Please read this instruction book carefully before operating this unit.
AC Power Operation
•
Plug the supplied AC power cord into the AC power socket on the back of this portable
stereo. Connect the AC Power Cord to your AC household mains outlet and switch on
the mains supply. Make sure the voltage is compatible.
Battery Operation
•
Remove mains lead from the unit for battery operation.
•
Open the Battery Compartment (20) at the back of the stereo and insert six UM-2
batteries following the polarity diagram shown inside the battery compartment.
•
Batteries should be removed form the compartment if the unit is not to be used for
some time.
•
Flat batteries should be removed from the unit to avoid leakage.
•
•
•
English
•
5
periods. Long exposure to high temperatures can warp the disc.
Do not stick paper or write anything with a ballpoint pen on the label side of the disc.
CD/MP3 PLAYBACK
6
English
REPEAT PLAYBACK WITH CD
1.
2.
Press the PLAY/PAUSE button (17).
To repeat the same track, press the PROG/P-MODE button (11) once. The indicator
‘REPEAT’ symbol flash on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator ‘REPEAT’ disappears
from the display.
To repeat the entire disc, press the PROG/P-MODE button (11) twice. REPEAT will
appear on the display.
Press the PROG/P-MODE button (11) button 3 times more to cancel all disc repeat. The
indicator REPEAT disappears from the display.
Loading and Unloading Compact Discs
1. Set the Function Selector (9) to the CD/MP3 Position.
2. Open the disc compartment by lifting the CD OPEN/CLOSE corner (6).
3. When the door has opened, remove a disc from its case and place it carefully in the
compartment with the label side facing up. Locate 3” discs, on the central spindle in the
compartment.
4. Close the door by pressing on the corner of the CD door.
3.
The total number of tracks appears on the display: Playback starts.
During playback, the actual track appears.
REPEAT PLAYBACK WITH MP3
5.
6.
7.
8.
Adjust the VOLUME control to your desired listening level.
To stop playback temporarily, press the PLAY/PAUSE (II ) button (17) once. The Play
indicator will flash on the display. Press the PLAY/PAUSE (II ) button again to resume
playback.
To stop playback, press the STOP (<) (19) button once.
To switch OFF the unit select OFF with the Function Selector (9).
Notes:
•
When the CD door is accidentally opened during playback, " OP " will appear on the
display.
•
Wait until the disc is fully stopped before opening the CD (2) compartment.
•
This unit can play 3" (8cm) single CDs without an adaptor.
LOCATING A PARTICULAR TRACK OR POINT OF THE TRACK
1.
2.
3.
4.
Press the SKIP DN (9)(14) button once to go back to the beginning of the current track.
Press the SKIP DN button repeatedly to go back to previous tracks.
Press the SKIP UP (13) button repeatedly to go to next tracks.
Press and hold either SKIP UP or SKIP DN button to search backwards or forwards, at
high speed, a particular point of track.
Note: Low level audio will be heard during the search process to assist in locating the
correct point in the track.
1.
2.
3.
4.
Press the PLAY/PAUSE button (17).
To repeat the same track, press the PROG/P-MODE button (11) once. The indicator
‘REPEAT’ flash on the display.
The CD will start single repeat playback until STOP button (19) is pressed. Press the
REPEAT button 3 times more to cancel single repeat. The indicator ‘REP’ disappears
from the display.
To repeat the entire disc, press the PROG/P-MODE button (11) three times. REP ALL
will appear on the display.
Press the PROG/P-MODE button (11) button 1 time more to cancel all disc repeat. The
indicator disappears from the display.
PROGRAMMED PLAYBACK FOR CD/MP3
IN CD
1. Press the PLAY/PAUSE button (17) and after 5 seconds the STOP button (19).
2. Press the PROG/P-MODE button (11). The track number “P-01” will appear and “PROG”
will appear on the display indicating the first selection.
3. Press SKIP DN (9) or SKIP UP (:) button to select the desired track to be programmed.
The track number which will be programmed will appears on the display.
4. Press once the PROG/P-MODE button (11) to enter the track into memory. “P-02” will
appear.
5. Repeat the steps 3 and 4 to program up to 20 CD tracks or 99 MP3.
6. Press PLAY/PAUSE (II) button (10) once to start programmed playback.
English
7.
7
To cancel programmed playback, press the STOP button (19) twice.
Note:
During program playback, if you wish to repeat the entire programmed playback,
press the PROG/P-MODE button (11) repeatedly until the “REP” indicator appears
on the display.
8
English
Concerning Compact Discs
Only compact discs identified with this mark can be used with
this player.
FOLDER FUNCTION IN MP3 MODE
Note: You can use the FOLD+/ + 10 or FOLD-/ - 10 Button (22/23) to jump 10
tracks up or down.
If in use, the player is likely to receive shocks or vibrations (i.e. whilst walking or in a
moving vehicle), The ANTI-SHOCK function is active to provide uninterrupted playback
when power on.
•
Should the player receive shocks for more than 5 seconds continuously in CD playback
or 50 seconds in MP3 playback, the sound can mute for a very short while and will
resume once the player has stabilised from the shock.
Notes:
•
The Anti-shock function will not correct the errors arising from the use of defective
scratched or dirty discs.
•
IMPORTANT! During CD/MP3 playback, the ANTI-SHOCK function is always ON and
this function can not be disactivated.
Power Supply
AC:
230V ~ 50Hz
Batteries:
6 x UM-2
Radio Frequency Coverage
FM:
87.5 - 108 MHz
MW:
540 - 1600 kHz
General
Headphones:
3.5mm stereo jack plug, 8-32 Ohm
CD Player
Pick Up:
3-Beam. Semiconductor Laser
Encoding:
16-Bit Linear
Note: Specifications and the design are subject to possible modifications without notice due to
improvement.
IMPORTANT
Since movement of the CD mechanism and the sensitive circuitry may cause interference
to a radio tuner nearby switch this unit off while operating other radio devices.
This product utilizes a laser
Danger - Invisible laser radiation when opened and interlock failed or defeated. Avoid
direct exposure to the beam.
Caution - Use of controls, adjustments, or procedures not listed in this manual may result
in hazardous radiation exposure.
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
This marking shown on the product or its literature, indicates that it should not
be disposed with other household wastes at the end of its working life. To prevent
possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this
product, or their local government office, for details of where and how they
can take this item for environmentally safe recycling.
Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product should not be mixed with other commercial
wastes for disposal.
9
CAUTION
RISK OF ELECTRIC
SHOCK
DO NOT OPEN
10
CLASS 1
LASER PRODUCT
230v~
2.
3
AM/FM Band-Taste
4.
5.
Frequenz-Skala
ABSTIMM-Knopf TRAGEGRIFF
6.
7.
8.
9.
+
-
+
11
12
•
•
•
1.
2.
•
•
13
14
WIEDERHOLTE WIEDERGABE IN CD
1.
2.
3.
4.
WIEDERHOLTE WIEDERGABE IN MP3
5.
6.
1.
2.
3.
4.
15
16
4.
•
TECHNISCHE DATEN
17
CLASS 1
LASER PRODUCT
230v~
POSITIONNEMENT DES COMMANDES
1.
2.
3.
4.
5.
6.
7.
8.
9.
-
-
18
17. Manille
+
+
23. Prise AC-230Vca
19
20
•
•
•
•
1.
2.
3.
4.
5.
6.
7.
8.
9.
21
22
3.
4.
4.
LECTURE PROGRAMMEE POUR CD/MP3
SELECTION D’UNE PISTE PARTICULIERE OU RECHERCHEAL’INTERIEUR D’UNE PISTE
1.
2.
1.
3.
4.
5.
6.
7.
23
24
CARACTERISTIQUES TECHNIQUES
FONCTION ANTI-CHOC
•
CASQUES
Italiano
25
CLASS 1
LASER PRODUCT
230v~
-
+
-
+
26
27
28
Italiano
UTILIZZO DELLA RADIO
1.
2.
3.
4.
MANIPOLAZIONE DEI COMPACT DISCS
•
•
•
•
•
Italiano
29
30
Nota:
LETTURA RIPETUTA IN CD
1.
2.
3.
4.
LETTURA RIPETUTA IN MP3
1.
2.
4.
5.
LETTURA PROGRAMMATA PER CD/USB
1.
2.
Italiano
31
FUNZIONE ANTI - SHOCK
•
32
33
CLASS 1
LASER PRODUCT
230v~
-
+
-
+
34
LOCALIZACIÓN DE LOS CONTROLES
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
35
36
MANIPULACIÓN DE LOS COMPACT DISCS
•
•
PREPARACIÓN AL USO
•
•
•
•
•
USO DE LA RADIO
1.
2.
•
37
38
2.
3.
4.
4.
5.
39
40
ESPECIFICACIONES TÉCNICAS
FUNCIÓN ANTI - CHOQUE
•
41
ATENÇÃO
42
CLASS 1
LASER PRODUCT
230v~
1.
2.
3.
Tecla Banda AM/FM
4.
5.
6.
7.
8.
9.
13. Tecla Salto/Busqueda atrás (9)
14. Ecrã LCD
16. Tecla Tocar/Pausa CD
-
+
-
+
43
44
1.
3.
4.
5.
•
•
45
46
LEITURA REPETIDA EM CD
1.
2.
4.
LEITURA REPETIDA EM MP3
1.
2.
3.
4.
47
AUSCULTADORES
48
IMPORTANTE
3-Raios, Laser Semi-condutor
16-Bit Linear
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages

Only pages of the document in English were displayed