D-Link DAP-2660 Quick Installation Guide

D-Link DAP-2660 is an advanced Wireless AC1200 Concurrent Dual Band PoE Access Point that delivers exceptional wireless connectivity and reliable network performance. With blazing-fast AC Wi-Fi speeds, you can enjoy smooth streaming, gaming, and web browsing without interruptions.

PDF

Document

Quick Installation Guide
Wireless AC1200 Concurrent Dual Band PoE Access Point
This document will guide you through the basic installation
process for your new D-Link Wireless AC Access Point.
DAP-2660
Documentation also available on
CD and via the D-Link Website
This installation guide provides basic instructions for installing the DAP-2660 Wireless Access
Point on your network. For additional information about how to use the Access Point, please
see the User’s Manual which is available on the CD included in this package or from the
D-Link support website.
System Requirements
Minimum System Requirements:
• CD-ROM Drive
• an Ethernet port, or an installed Ethernet adapter
• Internet Explorer 7.0, Safari 5.0, Firefox 3.5, Chrome 20 or later versions of these
browsers
1. Package Contents





DAP-2660 802.11ac Access Point
Power Adapter
Mounting Brackets
Ethernet Cable
CD-ROM
If any of the above items are missing, please contact your reseller.
Note: Using a power supply with a different voltage than the one included with the DAP-2660
will cause damage and void the warranty for this product.
2
LED
2. Hardware Overview
Power/Status LED - Dual color (Red/green)
. Flash Red during booting up or malfunction
. Static Green while it’s ready/working
. Solid Red while boot up fail
. Flash Green while traffic is passing through.
Interfaces
Power Receptor
LAN Port (PoE)
3
3. Installation
Power on the access point
To power on the DAP-2660, you can use ONE of the following methods:
1. Connect the supplied power adapter, OR
2. Plug one end of your Ethernet cable into the LAN port of the DAP-2660, and the
other end into a port on a PoE switch.
Configure the access point
To set up and manage the DAP-2660, use one of the following methods:
1. Connect the access point and your computer directly via a straight-through
Ethernet cable. Manage the access point from the computer.
Ensure your computer is configured with a static IP address in 192.168.0.0/24
subnet.
Launch a web browser, type the default IP address of the access point
(http://192.168.0.50) and then press Enter.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password field blank)
DAP-2660
Computer
2. Connect the access point and your computer to the same switch. Manage the
access point from the computer.
Enter 192.168.0.50 in the address field of your browser, which is the default IP
address of the access point.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: (Leave the password field blank)
DAP-2660
4
Switch
Computer
Installation
1. Place the mounting bracket on a wall or
ceiling.
4. Use the supplied screws to attach the
mounting ring to the wall.
2. Mark the points where you will insert the
screws. Take out the mounting ring.
5. Plug the Ethernet cable into the LAN
port on the access point.
3. Drill holes in the marked points and
insert the plastic wall anchors.
6. To attach the access point to the
mounting bracket.
Solid wall or ceiling
5
Mounting with a ceiling bracket
Installation
1. Clip two ceiling brackets onto the ceiling
panels. Make sure both brackets are in
line with each other.
Ceiling crossbar
3. Plug the Ethernet cable into the LAN
port on the access point.
4. Place the DAP-2660’s male bracket
in the mounting bracket’s female
bracket. Click DAP-2660 and the
mounting bracket to lock in position.
Ceiling bracket
2. Use the provided screws to attach the
mounting ring to the ceiling bracket.
TECHNICAL SUPPORT
United Kingdom (Mon-Fri) , Website: http://www.dlink.com
Home Wireless/Broadband 0871 873 3000 (9.00am–06.00pm, Sat 10.00am-02.00pm)
Managed, Smart, &amp; Wireless Switches, or Firewalls 0871 873 0909 (09.00am- 05.30pm)
(BT 10ppm, other carriers may vary.)
Ireland (Mon-Fri), Website: http://www.dlink.com
All Products 1890 886 899 (09.00am-06.00pm, Sat 10.00am-02.00pm)
Phone rates: €0.05ppm peak, €0.045ppm off peak times
6
DAP-2660 Installationsanleitung
Systemanforderungen
7
LED
8
3. Installation
Access Point - Stromzufuhr
DAP-2660
Computer
Switch
Computer
9
10
11
1. Contenu de la bo&icirc;te





12
Interfaces
Fiche
d'alimentation
Port LAN (PoE)
13
DAP-2660
Ordinateur
DAP-2660
14
Ordinateur
15
16





17
LED
Interfaces
18
DAP-2660
Ordenador
DAP-2660
Conmutador
Ordenador
19
20
ASISTENCIA T&Eacute;CNICA
http://www.dlink.com
Asistencia T&eacute;cnica Telef&oacute;nica de D-Link: +34 902 30 45 45 0,067 €/min
De Lunes a Viernes de 9:00 a 19:00
21
ITALIANO





22
2. Panoramica hardware
LED
ITALIANO
23
ITALIANO
DAP-2660
Computer
DAP-2660
24
Switch
Computer
ITALIANO
25
Staffa a soffitto
ITALIANO
26
NOTES
27
NOTES
28
NOTES
29
NOTES
30
NOTES
31">

Hello! I am an AI chatbot specifically trained to assist you with the D-Link DAP-2660 Quick Installation Guide. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Assistant typing

Assistant is out of keyboard. Please, try again later.

It looks like you''ve reached a document that is written in multiple languages, including one that isn''t your native language. You can use the following links to temporarily hide pages without the language you prefer.

Key features

2.4 GHz
5 GHz
Maximum data transfer rate: 1200 Mbit/s
IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3u
64-bit WEP, 128-bit WEP, 802.1x RADIUS, SSID, WPA, WPA2
Antennas quantity: 4 Internal Integrated antenna