Information To resize thickness, move all items on the front cover

Information To resize thickness, move all items on the front cover
To resize thickness, move all items on the front cover
and registration marks to left or right.
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
EUROPE
EDIROL (Europe) Ltd.
Deutschland
TEL: 0700 33 47 65 20
France
TEL: 0810 000 371
Italia
TEL: 02 93778329
U. S. A. / CANADA
EDIROL Corporation North
America
425 Sequoia Drive, Suite 114
Bellingham, WA 98226
U. S. A.
TEL: (360) 594-4276
FAX: (360) 594-4271
http://www.edirol.com/
HONG KONG
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
Flats Compound Off. Dr. Edwin
Moses Road, Mumbai-400011,
INDIA
TEL: (022) 2493 9051
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
MALAYSIA
AFRICA
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
SOUTH AFRICA
That Other Music Shop
(PTY) Ltd.
11 Melle St., Braamfontein,
Johannesbourg, SOUTH AFRICA
P.O.Box 32918, Braamfontein 2017
Johannesbourg, SOUTH AFRICA
TEL: (011) 403 4105
BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala Lumpur, MALAYSIA
TEL: (03) 2144-3333
PHILIPPINES
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
SINGAPORE
CRISTOFORI MUSIC PTE
LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
TAIWAN
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico D.F.
MEXICO
TEL: (55) 5668-6699
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa 1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
VENEZUELA
Musicland Digital C.A.
Av. Francisco de Miranda,
Centro Parque de Cristal, Nivel
C2 Local 20 Caracas
VENEZUELA
TEL: (212) 285-8586
ROLAND TAIWAN
ENTERPRISE CO., LTD.
AUSTRIA
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
TEL: (02) 2561 3339
Siemensstrasse 4, P.O. Box 74,
A-6063 RUM, AUSTRIA
TEL: (0512) 26 44 260
THAILAND
Theera Music Co. , Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
P.O.BOX 23032, Claremont 7735,
SOUTH AFRICA
TEL: (021) 674 4030
ASIA
Saigon Music
Suite DP-8
40 Ba Huyen Thanh Quan Street
Hochiminh City, VIETNAM
Tel: (08) 930-1969
Roland Austria GES.M.B.H.
BELGIUM/HOLLAND/
LUXEMBOURG
Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing 100011
CHINA
TEL: (010) 6426-5050
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie Yi
Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
Tel: (020) 8736-0428
AUSTRALIA/
NEW ZEALAND
AUSTRALIA
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
TEL: (02) 9982 8266
NEW ZEALAND
Roland Corporation Ltd.
32 Shaddock Street, Mount Eden,
Auckland, NEW ZEALAND
TEL: (09) 3098 715
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FRANCE
Roland France SA
4, Rue Paul Henri SPAAK,
Parc de l'Esplanade, F 77 462 St.
Thibault, Lagny Cedex FRANCE
TEL: 01 600 73 500
FINLAND
Roland Scandinavia As,
Filial Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
PORTUGAL
Tecnologias Musica e Audio,
Roland Portugal, S.A.
Cais Das Pedras, 8/9-1 Dto
4050-465 PORTO
PORTUGAL
TEL: (022) 608 00 60
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 211 005
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
TEL: (022) 66-9426
IRAN
MOCO, INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
ISRAEL
Halilit P. Greenspoon &
Sons Ltd.
8 Retzif Ha’aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
JORDAN
AMMAN Trading Agency
KUWAIT
Easa Husain Al Yousifi Est.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
QATAR
Piata Libertatii 1,
535500 Gheorgheni, ROMANIA
TEL: (266) 364 609
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
P.O. Box 62,
Doha, QATAR
TEL: 423554
Before using this unit, carefully read the sections entitled: “USING
THE UNIT SAFELY” (p. 2–3) and “IMPORTANT NOTES” (p. 4).
These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you
have gained a good grasp of every feature provided by your new unit,
Getting Started should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary Bldg.,
1st Floor, Alkhobar,
SAUDI ARABIA
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SYRIA
Technical Light & Sound
Center
Khaled Ebn Al Walid St.
Bldg. No. 47, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
Ant Muzik aletleri ithalat ve
ihracat Ltd Sti
Landstrasse 5, Postfach,
CH-4452 Itingen,
SWITZERLAND
TEL: (061) 927-8383
Siraselviler Caddesi Siraselviler
Pasaji No:74/20
Taksim - Istanbul, TURKEY
TEL: (0212) 2499324
UKRAINE
U.A.E.
TIC-TAC
Zak Electronics & Musical
Instruments Co. L.L.C.
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manuale d’uso
Manual del usuario
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
Owner’s Manual
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: +44 (0)20 8747 5949
FAX:+44 (0)20 8747 5948
http://www.edirol.com/europe
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai, U.A.E.
TEL: (04) 3360715
As of November 1, 2003 (EDIROL-1)
03341712
2KG
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
To resize thickness, move all items on the front cover
and registration marks to left or right.
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
For the USA
The
symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers
other adverse effects
respect to the home
furnishings, as well
animals or pets.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
to damage or
caused with
and all its
to domestic
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Tested To Comply With FCC Standards
001
• Before using this unit, make sure to
read the instructions below, and the
Owner’s Manual.
..................................................................................................
002a
• Do not open or perform any internal
modifications on the unit.
..................................................................................................
003
• Do not attempt to repair the unit, or
replace parts within it (except when
this manual provides specific instructions directing you to do so). Refer all
servicing to your retailer, the nearest
EDIROL/Roland Service Center, or an
authorized EDIROL/Roland
distributor, as listed on the “Information”
page.
..................................................................................................
004
• Never use or store the unit in places
that are:
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet
floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..................................................................................................
2
007
• Make sure you always have the unit
placed so it is level and sure to remain
stable. Never place it on stands that
could wobble, or on inclined surfaces.
..................................................................................................
010
• This unit, either alone or in combination with an amplifier and
headphones or speakers, may be
capable of producing sound levels that
could cause permanent hearing loss.
Do not operate for a long period of
time at a high volume level, or at a
level that is uncomfortable. If you
experience any hearing loss or ringing
in the ears, you should immediately
stop using the unit, and consult an
audiologist.
..................................................................................................
011
• Do not allow any objects (e.g.,
flammable material, coins, pins); or
liquids of any kind (water, soft drinks,
etc.) to penetrate the unit.
..................................................................................................
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
UA-1X
USB Audio Interface
Edirol Corporation North America
425 Sequoia Drive, Suite 114, Bellingham, WA 98226
(360) 594-4276
UA-1X_ALL.book 3 ページ 2003年12月3日 水曜日 午後2時50分
012d
104
• Immediately turn the power off, and
request servicing by your retailer, the
nearest Roland Service Center, or an
authorized Roland distributor, as
listed on the “Information” page
when:
• If smoke or unusual odor occurs
• Objects have fallen into, or liquid
has been spilled onto the unit; or
• The unit has been exposed to rain
(or otherwise has become wet); or
• The unit does not appear to operate
normally or exhibits a marked
change in performance.
• Try to prevent cords and cables from
becoming entangled. Also, all cords
and cables should be placed so they
are out of the reach of children.
..................................................................................................
106
• Never climb on top of, nor place heavy
objects on the unit.
..................................................................................................
108c
• Disconnect all cords coming from
external devices before moving
the unit.
..................................................................................................
..................................................................................................
013
• In households with small children, an
adult should provide supervision until
the child is capable of following all the
rules essential for the safe operation
of the unit.
..................................................................................................
014
• Protect the unit from strong impact.
(Do not drop it!)
..................................................................................................
204
* Microsoft and Windows are registered
trademarks of Microsoft Corporation.
206e
* Screen shots in this documents are reprinted
with permission from Microsoft Corporation.
206j
* Windows® is known officially as:
“Microsoft® Windows® operating system.”
207
* Apple and Macintosh are registered
trademark of Apple Computer, Inc.
209
* MacOS is a trademark of Apple Computer,
Inc.
220
* All product names mentioned in this
document are trademarks or registered
trademarks of their respective owners.
3
UA-1X_ALL.book 4 ページ 2003年12月3日 水曜日 午後2時50分
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2–3, please read and observe
the following:
Power Supply
Additional Precautions
307
• Before connecting this unit to other devices, turn off the
power to all units. This will help prevent malfunctions and/
or damage to speakers or other devices.
552
• Unfortunately, it may be impossible to restore the contents of
data that was stored on a storage device (e.g., hard disk) once
it has been lost. Roland
Corporation assumes no liability concerning such
loss of data.
553
• Use a reasonable amount of care when using the unit’s
buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the
connector itself—never pull on the cable. This way you
will avoid causing shorts, or damage to the cable’s internal
elements.
558a
• To avoid disturbing your neighbors, try to keep the unit’s
volume at reasonable levels. You may prefer to use
headphones, so you do not need to be concerned about
those around you (especially when it is late at night).
559a
• When you need to transport the unit, package it in the box
(including padding) that it came in, if possible. Otherwise,
you will need to use equivalent packaging materials.
562
• Use a cable from Roland to make the connection. If using
some other make of connection cable, please note the
following precautions.
• Some connection cables contain resistors. Do not use
cables that incorporate resistors for connecting to this
unit. The use of such cables can cause the sound level to
be extremely low, or impossible to hear. For information
on cable specifications, contact the manufacturer of
the cable.
563
• Unauthorized duplication, reproduction, hiring, and lending
prohibited.
564
• Before you open the included CD-ROM, you must read the
“license agreement”. Opening the CD-ROM will be taken
to mean your acceptance of the license agreement.
986
• Although Roland has tested numerous configurations, and
has determined that on average, a computer system similar
to that described above will permit normal operation of the
UA-1X, Roland cannot guarantee that a given computer
can be used satisfactorily with the UA-1X based solely on the
fact that it meets the above requirements. This is because
there are too many other variables that may influence the
processing environment, including differences in motherboard design and the particular combination of other devices
involved.
Placement
351
• Using the unit near power amplifiers (or other equipment
containing large power transformers) may induce hum. To
alleviate the problem, change the orientation of this unit; or
move it farther away from the source of interference.
352a
• This device may interfere with radio and television reception.
Do not use this device in the vicinity of such receivers.
352b
• Noise may be produced if wireless communications devices,
such as cell phones, are operated in the vicinity of this unit.
Such noise could occur when receiving or initiating a call, or
while conversing. Should you experience such problems, you
should relocate such wireless devices so they are at a greater
distance from this unit, or switch them off.
354a
• Do not expose the unit to direct sunlight, place it near devices
that radiate heat, leave it inside an enclosed vehicle, or
otherwise subject it to temperature extremes. Excessive
heat can deform or discolor the unit.
355b
• When moved from one location to another where the temperature and/or humidity is very different, water droplets
(condensation) may form inside the unit. Damage or
malfunction may result if you attempt to use the unit in
this condition. Therefore, before using the unit, you must
allow it to stand for several hours, until the condensation has
completely evaporated.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth or
one that has been slightly dampened with water. To remove
stubborn dirt, use a cloth impregnated with a mild, nonabrasive detergent. Afterwards, be sure to wipe the unit
thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any kind,
to avoid the possibility of discoloration and/or deformation.
Copyright
851
• Unauthorized recording, distribution, sale, lending, public
performance, broadcasting, or the like, in whole or in part, of
a work (musical composition, video, broadcast, public performance, or the like) whose copyright is held by a third party is
prohibited by law.
852a
• When exchanging audio signals through a digital connection
with an external instrument, this unit can perform recording
without being subject to the restrictions of the Serial Copy
Management System (SCMS). This is because the unit is
intended solely for musical production, and is designed
not to be subject to restrictions as long as it is used to record
works (such as your own compositions) that do not infringe
on the copyrights of others. (SCMS is a feature that prohibits
second-generation and later copying through a digital
connection. It is built into MD recorders and other consumer
digital-audio equipment as a copyright-protection feature.)
853
• Do not use this unit for purposes that could infringe on a
copyright held by a third party. We assume no responsibility
whatsoever with regard to any infringements of third-party
copyrights arising through your use of this unit.
4
UA-1X_ALL.book 5 ページ 2003年12月3日 水曜日 午後2時50分
Contents
Features of the UA-1X ............................................................................ 6
Check the Contents of the Package ..................................................... 7
Panel Descriptions ................................................................................. 8
Using the UA-1X ..................................................................................... 9
UA-1X Signal Flow Diagram..................................................................................... 9
Listening to Sound from Your Computer ............................................................. 10
Digitally Recording to MD ...................................................................................... 11
Recording from the AUX Input .............................................................................. 12
English
Connections and Driver Installation (Windows)................................ 13
Connections and Driver Installation (Macintosh).............................. 23
Deutsch
Troubleshooting ................................................................................. 111
Problems related to the USB driver...................................................................... 111
Problems when using the UA-1X ......................................................................... 113
Deleting the USB Audio Device Driver (Windows) .......................................... 119
Specifications ..................................................................................... 120
5
UA-1X_ALL.book 6 ページ 2003年12月3日 水曜日 午後2時50分
Features of the UA-1X
The UA-1X is a USB audio interface that can be connected to your computer via
a single USB cable, providing high-quality digital audio output.
Unbeatable Audio Quality
Digital output connectors are provided, and sampling frequencies of
32/44.1/48 kHz are supported for both digital output, allowing signals
to be transferred to or from CD, MD, or DAT with no loss in audio quality.
Analog input/output is provided by RCA phono jacks, allowing high-quality
recording and playback.
* Sampling frequency
When audio is recorded digitally, the level of the sound is measured at fixed
intervals, and those levels are converted into digital signals. The “sampling
frequency” is what determines this interval. Normally, a CD or MD uses
a sampling frequency of 44.1 kHz.
Simple Connection to Your Computer Via USB
Cable
The UA-1X can be connected to your computer via a USB cable. It is bus-powered,
meaning that the power is supplied from your computer.
Since an AC adaptor is not necessary, the UA-1X is an ideal choice for use with
a notebook computer.
What is USB?
USB stands for Universal Serial Bus. It is a new interface used to connect various
peripheral devices to a computer.
USB allows more than one peripheral device to be connected via a single USB cable,
and also allows data to be transmitted more rapidly than conventional serial ports.
Peripherals can also be connected or disconnected with the power turned on, and
the computer will automatically recognize the peripheral that has been plugged in.
(Some peripherals may require settings or other operations to be performed.)
6
UA-1X_ALL.book 7 ページ 2003年12月3日 水曜日 午後2時50分
Check the Contents of the Package
The UA-1X includes the following items. When you open the package, first make
sure that all items are included. If any are missing, contact the dealer where you
purchased the UA-1X.
● Owner’s Manual
This is the document you are reading. Keep it at hand for reference when needed.
You will Need to Provide These Items Yourself
External amp, speakers, headphones, and mic are not included
External amp, speakers, or headphones necessary for listening to the sound output
via the UA-1X are not included. Nor is a mic included for inputting sound to the
UA-1X. You will need to provide these items yourself.
* As soon as you connect the UA-1X to your computer, sound will no longer be output from
the speakers of your computer. You will need to provide an external monitor system
or headphones.
Digital input/output cables for connecting the MD or DAT recorder are not
included
Although you can use an MD or DAT digital recorder to perform digital recording,
the cables for connecting the recorder to the UA-1X are not included. You will need
to provide these separately.
7
UA-1X_ALL.book 8 ページ 2003年12月3日 水曜日 午後2時50分
Panel Descriptions
fig.01-08_90
1
2
3
8
4
7
1 Input select switch
Set this switch appropriately for the device that
you connect to the input jacks. Normally, you will
leave this at the LOW setting. If the sound is
distorted because the signal level is high, set this
to HIGH.
2
Line input jacks
Make connections here when you want to input
audio signals from an audio device or MIDI
sound generator.
3 Line output jacks
Connect these to your audio equipment (AUX IN,
LINE IN), such as an AV amp or stereo system.
Output level indicator,
Input level indicator
The INPUT indicator will light when audio
is received through the line input jacks. The
OUTPUT indicator will light when audio is
output from the line output jacks.
4
5 Headphones volume
This adjusts the volume that is output from the
Headphone jack 6 .
You cannot adjust the volume of the signal that
is output from the digital output jack.
UA-1X
8
Stereo set
(Cassette, record player)
Loop Connection
INPUT
LINE OUT
OUTPUT
LINE IN
6
5
6 Headphone jack
A set of headphones can be connected here. Even
if headphones are connected, sound will still be
output from the Line output jacks 3 .
6 Digital output connector (optical)
If you want to digitally output the audio signal
to a Dolby Digital decoding amp or to a digital
recorder such as an MD, use an optical cable
to make connections.
* The same jack serves as both the
headphone jack and digital output jack.
Optical
These are digital I/O jacks for connecting optical
cables. Digital I/O jacks for connecting coaxial
cables are labeled Coaxial.
7 USB indicator
This will light when the UA-1X is connected and
recognized to the computer.
8 USB cable
Connect this cable to the USB connector of your
computer.
UA-1X_ALL.book 9 ページ 2003年12月3日 水曜日 午後2時50分
Using the UA-1X
This chapter explains the various ways the UA-1X can be connected, and introduces
some of its applications.
* To prevent malfunction and/or damage to speakers or other devices, always turn down the
volume, and turn off the power of all devices before disconnecting the USB cable.
UA-1X Signal Flow Diagram
fig.diagram.e
AUDIO INPUT
R
AUDIO OUTPUT
L
R
L
UA-1X
INPUT
SELECT
LED
LED
OPTICAL
OUT
PHONES
Signal flow
* The same jack serves as both the headphone jack and digital output jack.
As soon as you connect the UA-1X to your computer, sound will no longer
be output from the speakers of your computer.
• Connect an external monitor system or headphones to the UA-1X.
• If you want sound to be output from the speakers of your computer,
disconnect the UA-1X from your computer.
9
UA-1X_ALL.book 10 ページ 2003年12月3日 水曜日 午後2時50分
Using the UA-1X
Listening to Sound from Your Computer
As shown in the diagram, you can connect headphones or monitor speakers,
and monitor the playback sound from your application or the sound from the
instrument or audio device to which the UA-1X is connected.
fig.07-01
Stereo set,
Monitor speakers, etc.
External Input jacks
Signal flow
(LINE IN, AUX IN)
OUTPUT
Computer
Stereo
Headphones
USB
connector
Signal flow
Set the desired sampling frequency for recording in the application being used for recording,
then proceed with recording. Available sampling frequencies vary depending on the operating
system used.
fig.table
32 kHz
44.1kHz
48 kHz
✕
✕
❍
Windows 98 SE/
Windows Me/
Windows 2000/XP
❍
❍
❍
OS
10
Mac OS 9/X
UA-1X_ALL.book 11 ページ 2003年12月3日 水曜日 午後2時50分
Using the UA-1X
Digitally Recording to MD
fig.07-02
Audio amplifier / MIDI Sound module
( Cassette, Record players)
External Input jacks
(LINE IN, AUX IN)
Audio Cable
OUTPUT
Computer
USB
connector
Signal flow
OPTICAL
OUT
Optical
Digital
cable
DIGITAL INPUT
MD
11
UA-1X_ALL.book 12 ページ 2003年12月3日 水曜日 午後2時50分
Using the UA-1X
Recording from the AUX Input
fig.07-05
Audio amplifier / MIDI Sound module
( Cassette, Record players)
External Output jacks
(LINE OUT)
If the input signal level is high
(causing the sound to distort),
set this to "HIGH."
INPUT
Computer
Stereo
Headphones
USB
connector
Signal flow
If the input signal level is high (causing the sound to distort), set INPUT SELECT
to “HIGH”.
If you are using a record player, use a player that has a built-in phono
equalizer. If your record player does not have a phono equalizer, output
the sound through a speaker system that has a phono equalizer.
Be Careful of Looped Connections
fig.loop
UA-1X
Stereo set
(Cassette, record player)
Loop Connection
INPUT
OUTPUT
LINE OUT
LINE IN
If you connect the UA-1X as shown in the above diagram with another device that
passes the input audio back to the output (e.g., a MD/DAT in recording mode), the
sound will loop between the UA-1X and the other device, causing oscillation and
producing an unexpected high volume. Be aware that such connections can cause
malfunctions or damage your speakers.
12
UA-1X_ALL.book 13 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
English
* If you are a Macintosh user, refer to Connections and Driver Installation
(Macintosh) (p. 23).
Before installing the driver
* The UA-1X cannot be used with Windows 95 or Windows NT.
* Exit all other applications of the Windows before you install the UA-1X driver.
* If you intend to connect the UA-1X and other USB devices to your computer and use them
simultaneously, disconnect all USB devices other than the UA-1X from the USB connector
before you install the driver. If a USB device other than the USB is left connected to your
computer when you install the driver, the driver may not be installed correctly.
In order to use the UA-1X, you must first install the USB Composite Device driver,
the USB Human Interface driver, and the USB Audio Device driver consecutively.
These drivers are included with Windows. If you are using Windows 98, this driver
is provided in the Microsoft Windows CD-ROM, so you will need to have the
Microsoft Windows CD-ROM ready.
(This is not necessary for Windows Me, 2000, or XP.)
What is a driver?
A driver is software that allows an application program running on your computer
to transfer data to and from the UA-1X when it is connected to your computer via
a USB cable.
The driver passes data from the application to the UA-1X, and passes data from the
UA-1X to the application.
USB
Driver
Computer
USB
connector
Application
Italiano
fig.05-01.e
UA-1X
13
UA-1X_ALL.book 14 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
Making Connections and Installing the Driver
The installation procedure will differ depending on your
system. Please proceed to one of the following sections,
depending on the system you use.
• Windows XP/2000 users ...................p. 14
• Windows Me users .............................p. 15
• Windows 98 users...............................p. 16
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before disconnecting the USB cable.
It is not necessary to turn off the power of your computer.
Use a USB cable to connect the UA-1X to your computer
before turning on the power of your audio equipment.
■ Windows XP/2000 Users
1
With the UA-1X disconnected from your computer,
turn on your computer and start up Windows.
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Use a USB cable to connect the UA-1X to your
computer.
The UA-1X will be detected automatically, and the driver will
be installed.
3
After installing the driver, restart Windows.
Next, you need to make the driver settings.
→ Settings and Checking (p. 19)
14
If you are using Windows XP,
the installation has been
completed when the message
near the taskbar saying that
“Found New Hardware”
has disappeared.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
UA-1X_ALL.book 15 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
■ Windows Me Users
2
Use a USB cable to connect the UA-1X to your
computer.
fig.02-03.e
3
Windows will detect the
UA-1X, and the “Add New
Hardware Wizard” dialog box
will appear.
Make sure that Automatic search
for a better driver (Recommended) is selected, and
click [Next].
4
5
This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
Some time may be required
until this dialog box appears.
The search for the driver starts.
When the correct driver is found, driver installation
starts.
fig.02-04.e
When a dialog box informing
you that driver installation
has finished appears, click
[Finish], and restart
Windows.
Depending on your computing
setup, there may be a short
wait after the driver is
installed until the device
is recognized.
6
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
English
With the UA-1X disconnected from your computer,
turn on your computer and start up Windows.
1
Next, you need to make the driver settings.
→ Settings and Checking (p. 19)
15
UA-1X_ALL.book 16 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
■ Windows 98 Users
Installation must be performed in the order of the USB
Composite Device driver, USB Human Interface Device
driver, and then the USB Audio Device driver. Use the
following procedure to perform the installation.
1
With the UA-1X disconnected from your computer,
turn on your computer and start up Windows.
Disconnect all USB cables except for a USB keyboard and
USB mouse (if used).
2
Insert the Microsoft Windows CD-ROM into your
CD-ROM drive, and use a USB cable to connect
the UA-1X to your computer.
Since some computers are sold with the contents of the
Microsoft Windows CD-ROM already in the hard disk, a
Microsoft Windows CD-ROM may not have been included.
If this is the case, you will be able to install the driver without
the Microsoft Windows CD-ROM
This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
connecting a USB connector
is required before the unit
will operate normally.
fig.02-05.e
3
A USB Composite Device will
be detected automatically, and
the “Add New Hardware
Wizard” dialog box will appear.
Click [Next].
fig.02-06.e
4
16
When the display asks “What
do you want Windows to
do?”, select “Search for the
best driver for your device.
(Recommended)” and click
[Next].
If this dialog box does not
appear, refer to Problems
related to the USB driver
(p. 111)
UA-1X_ALL.book 17 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
fig.02-07.e
5
English
Check CD-ROM drive, and
click [Next].
fig.02-08.e
6
Click [Next].
7
* Depending on your system, the
Location of driver may differ from
the above illustration, but this is not
a problem.
Copying of the file (Driver) will begin.
fig.02-09.e
If the Windows CD-ROM is not
inserted in the CD-ROM drive,
a “Insert Disc” dialog box may
appear. If this occurs, insert the
Microsoft Windows CD-ROM
into the CD-ROM drive, and
click [OK].
fig.02-10.e
Italiano
When installation of the USB
Composite Device driver is
finished, the following dialog
box will appear. Click [Finish].
fig.02-11.e
9
Next, the USB Human
Interface Device will be
detected automatically, and the
“Add New Hardware Wizard”
dialog box will appear. Click
[Next], and proceed with the
installation in the same way
as in steps 4–7 (pp. 16–17).
In step 6, the screen will
indicate “Windows driver file
search for the device: USB
Audio Device.”
17
8
UA-1X_ALL.book 18 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
fig.02-12.e
10
When installation of the USB
Human Interface Device
driver is finished, the
following dialog box will
appear. Click [Finish].
fig.02-13.e
11
Next, the USB Audio Device
will be detected automatically,
and the “Add New Hardware
Wizard” dialog box will
appear.
In step 6, the screen will
indicate “Windows driver file
search for the device: USB
Audio Device.”
Click [Next], and proceed with the installation in the same
way as in steps 4–7 (pp. 16– 17).
fig.02-14.e
12
When installation of the USB
Audio Device driver is
complete, a dialog box like the
one shown here will appear.
Click [Finish].
This completes installation of the USB Composite Device
driver, the USB Human Interface Device driver, and the USB
Audio Device driver. Restart Windows.
Next, you need to make the driver settings.
→ Settings and Checking (p. 19)
18
Depending on your system,
the cursor may stay in the
hourglass shape for several
minutes after you click [OK],
but you should simply keep
waiting.
UA-1X_ALL.book 19 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
Settings and Checking
1
English
■ Specifying the Audio Input/Output Device
Click the Windows Start button, and select Settings Control Panel. (In Windows XP, click the Start button and
then click Control Panel.)
Access “Sound and Multimedia Properties”
(for Windows 98, “Multimedia Properties”).
If using Windows XP/2000/Me:
In Control Panel, double-click the Sounds and Multimedia
icon to open the “Sounds and Multimedia Properties”
dialog box.
Windows 98 users:
In Control Panel, double-click the Multimedia icon to open
the Multimedia Properties dialog box.
3
4
Click the Audio tab.
As the Preferred device for Sound playback and
Preferred device for Sound recording, select USB
Audio CODEC or USB Audio Device.
Click
, and from the list that appears, click USB Sudio
CODEC or USB Audio Device to select it.
5
If you are using Windows XP,
set the Default device for
Sound playback and Default
device for Sound recording
to USB Audio CODEC.
If you are using Windows 98,
set the Preferred device for
Playback and Preferred
device for Recording to
USB Audio CODEC.
Click [OK] to complete the settings.
Depending on your system,
USB Audio Device will be
shown a number added, ex.
“USB Audio Device (1).”
19
Italiano
* If the Sound and Multimedia Properties icon is not shown
Windows XP:
In the Control Panel, click Sounds, Speech, and Audio
Devices. Next, click Sounds and Audio Devices to access
the “Sound and Audio Devices Properties” dialog box.
Windows Me:
In the left frame, click View all Control Panel options.
2
UA-1X_ALL.book 20 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
Volume Control Settings
The output volume of the UA-1X can be controlled by the
Windows Volume Control.
1
Click the Windows Start button, and select Programs
(In Windows XP, All Programs) – Accessories –
Entertainment – Volume Control to start it up.
Windows XP users
fig.05-16ae_30
If Volume Control is not
installed on your computer,
use Add/ Remove
Applications in the Control
Panel to install it. For details
on installation, refer to the
Windows owner’s manual
or Help.
Windows Me users
fig.02-17.e.eps
Windows 2000 users/Windows 98 users
fig.02-18.e.eps
If you are using Windows
2000 and “CD Player” does
not appear, check the Digital
CD Playback item “Enable
digital CD audio for this
CD-ROM device.”
→ When using your
computer’s CD-ROM drive
to play an audio CD, or
when playing background
music for games with the
UA-1X (p. 22)
20
UA-1X_ALL.book 21 ページ 2003年12月3日 水曜日 午後2時50分
Wave
SW Synth
* 1
Depending on your Windows version, this may be displayed as
an “analog connector.”
* 2
If the playback of the CD does not change when you adjust this
volume, change the WAVE volume.
If Mute is checked, or if the
slider is in the lowest position,
no sound will be output from
the UA-1X.
If the UA-1X is connected,
Windows will not output
sound from your computer's
speakers. Since the sound from
your computer will be output
from the UA-1X's headphone
jack or line output jacks rather
than from your computer's
speakers, you will need to
connect headphones or
monitor speakers to the
UA-1X. Alternatively, you
can connect the UA-1X's line
output jacks to the LINE input
jacks of your computer.
CD Player
Adjust the volume of the analog outputs
(line output and headphone output).
The digital output will not change (*1).
Adjust the “CD Music” volume for the
CD-ROM drive of your computer (*2).
Adjust the volume that is output from
the audio output device “USB Audio
Device.” The digital output and analog
output will change.
Adjust the volume of the software
synthesizer built into Windows.
USB Audio
(Speaker)
By turning up the volume
control you can output the
sound from your computer
through the UA-1X at the
best audio quality.
You can raise or lower the slider to adjust the volume
of the UA-1X. The following items can be set.
2
English
Connections and Driver Installation (Windows)
21
UA-1X_ALL.book 22 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Windows)
When using your computer’s CD-ROM drive to play an audio CD, or when
playing background music for games with the UA-1X
Windows XP/2000 users:
1.
Open the System Properties dialog box.
Select Start | Settings | Control Panel, and in the Control Panel, double-click
the System icon.
For Windows XP, select Start | Control Panel, and in the Control Panel,
double-click the System icon.
Alternatively, click Control Panel | Performance and Maintenance. Next,
click the System icon.
2.
Open the Device Manager.
Click the Hardware tab, and click the Device Manager button.
3.
Open the CD-ROM drive’s Properties.
In CD-ROM drive, double-click the CD-ROM drive that you are using. With
Windows XP, you should next click the Properties tab.
In Digital CD Playback, check the “Enable digital CD audio for this
CD-ROM device” item.
Windows Me users:
1.
Open the System Properties dialog box.
Select Start | Settings | Control Panel, and in the Control Panel, double-click
the System icon.
2.
Click the Device Manager tab.
3.
Open the CD-ROM drive’s Properties.
Double-click the CD-ROM icon, and then double-click the CD-ROM drive that
you are using.
4.
Click the Properties tab, and in Digital CD Playback, check the “Enable
digital CD audio for this CD-ROM device” item.
Windows 98 users:
1.
Open the Multimedia Properties dialog box.
Select Start | Settings | Control Panel, and in Control Panel, double-click the
Multimedia icon.
2.
Click the CD Music tab, and check the “Enable digital CD audio for this
CD-ROM device” item.
* Depending on your system, playback may still not be possible. For details, refer to
information provided by your computer’s manufacturer. If you are using a PC-card
(PCMCIA) type CD-ROM drive, playing back WAVE data from a CD-ROM or playing
an audio CD may cause interrupted sound, or possibly no sound at all.
22
UA-1X_ALL.book 23 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
English
* If you are a Windows user, refer to Connections and Driver Installation (Windows)
(p. 13).
When you start up your computer with the UA-1X connected, the computer may
become unstable. If this occurs, start up your computer before connecting the
UA-1X, and connect the UA-1X after start-up.
Before Installing the Driver
In order to use the UA-1X, you must first install a driver. UA-1X uses a driver
included with Mac OS. You do not need to use the CD-ROM that is included
with the UA-1X.
What is a Driver?
A driver is software that allows an application program running on your computer
to transfer data to and from the UA-1X when it is connected to your computer via
a USB cable.
The driver passes data from the application to the UA-1X, and passes data from
the UA-1X to the application.
USB
Driver
USB
connector
Computer
Application
fig.05-01.e
UA-1X
The installation procedure will differ depending on your
system. Please proceed to one of the following sections,
depending on the system you use.
• Mac OS 9 users ....................................p. 24
• Mac OS X users ...................................p. 28
23
UA-1X_ALL.book 24 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
Connections and Driver Installation (OS 9)
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the
power on all devices before disconnecting the USB cable. It is
not necessary to turn off the power of your computer. Use
a USB cable to connect the UA-1X to your computer before
turning on the power of your audio equipment.
1
With the UA-1X disconnected, start up the Macintosh.
Disconnect all USB cables except for a USB keyboard and USB
mouse (if used).
2
Exit all currently running software (applications).
If you are using virus checking or similar software, be sure
to exit it as well.
fig.03-02.e
3
After starting up Mac
OS, select Apple
System Profiler from
the Apple menu.
The “Apple System
Profiler” dialog box will
appear.
4
5
6
24
Click the Devices and Volumes tab.
Choose Update all information from the Commands
menu.
Use a USB cable to connect the UA-1X to your
computer.
This unit is equipped with
a protection circuit. A brief
interval (a few seconds) after
connecting a USB connector is
required before the unit will
operate normally.
UA-1X_ALL.book 25 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
7
Wait for approximately five seconds.
English
UA-1X uses a driver included with Mac OS.
While you are waiting, the screen display will not change,
but the UA-1X is being detected. Do not touch the mouse
or keyboard.
fig.03-04.e
In order to check that
detection has been
completed, once again
go to Apple System
Profiler, and select
Update all information from the Commands menu.
8
In the USB area, three audio devices will be displayed.
If these are displayed correctly, driver installation has
succeeded. In the File menu, click Quit to close “Apple
System Profiler.”
If they are not displayed correctly, disconnect the UA-1X,
wait for about ten seconds, and then repeat the procedure
from step 2.
■ Settings and Checking
Italiano
Adjusting the Sound Input/Output
fig.03-05.e
2
From the Apple
menu, select
Control Panels Sound to open the
Sound dialog.
1
Click the Speakers
tab or Speaker
Settings.
25
UA-1X_ALL.book 26 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
fig.03-06.e
3
Turn down the volume
on the UA-1X, and on
your audio equipment,
then click [Start Test].
The contents of the display
will differ depending on your
operating system and data.
fig.03-07.e
4
Use the [Main Volume]
bar to adjust the volume.
When you are finished,
click [Stop Test].
Test sounds are output from
left to right, along with what
appears on the screen.
Depend on the your OS
version, there is no Main
Volume bar. In that case, use
the Volume bar in the Output
to adjust the volume.
fig.03-08.e
5
In the Sound dialog box,
click the Input tab.
In Choose a source for
sound input, select
USB audio.
* Do not check “Play sound
through output device.”
26
If USB audio is not displayed,
close the “Sound” dialog box,
and disconnect the UA-1X’s
USB cable from the Macintosh.
Perform the driver installation
once again.(p. 24)
UA-1X_ALL.book 27 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
English
When you are finished making settings, close the
“Sound” dialog box.
Select Quit from the File menu.
Italiano
Known issues: UA-1X
• While the audio application is recording or playing, do not connect/disconnect
the USB cable. Doing so may cause the application to freeze.
• You may hear sound hopping and/or noise when you record and play back at the
same time due to high load on the CPU. However, the noise should not be in the
recording itself. Such noise should only be found in the playback signal.
• The standard driver that comes with Mac OS is not ASIO compatible.
6
27
UA-1X_ALL.book 28 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
Connections and Driver Installation (OS X)
* The UA-1X and Mac OS 10.2 are used for this explanation.
■ Make Connections and System Sound
Input/Output Settings
1
2
Use a USB cable to connect the UA-1X to your
Macintosh.
You cannot use the UA-1X in
the Mac OS X Classic
environment.
Open the System Preference dialog box and click
Sound.
fig.macX-1
3
In the Sound Effects
tab, click Play alerts
and sound effects
through and choose
USB Audio CODEC
as the playback device
for sound effects.
figmacX-2, macOSX-3.
4
Click the Output tab,
and choose USB
Audio CODEC as the
device that will output
sound.
If no sound is output from the
speaker (internal speaker) of
the Macintosh, choose Built-in
audio controller in the Output
tab.
28
UA-1X_ALL.book 29 ページ 2003年12月3日 水曜日 午後2時50分
Connections and Driver Installation (Macintosh)
figmacX-2, macOSX-3.
If the Input tab is
displayed, choose USB
Audio CODEC as the
device for inputting
sounds.
English
5
Known issues: UA-1X
Caution
Please check the following before you use your software.
• Use a USB cable to connect the UA-1X to your computer before you
start up your software.
• Do not disconnect the UA-1X's USB cable while your software is
running.
• Exit your software before you disconnect the UA-1X's USB cable.
• Turn off the Sleep settings of your Macintosh.
• The UA-1X will not operate in the Mac OS X Classic environment.
You can not use it if the Classic environment is running.
■ Audio Software Settings
Use a USB cable to connect the UA-1X to your computer
before you start up your software.
Italiano
If your software allows you to make audio input/output
settings, choose USB Audio CODEC.
* For details, refer to the owner's manual of the software you
are using.
Known issues: UA-1X
• While the audio application is recording or playing, do not connect/disconnect
the USB cable. Doing so may cause the application to freeze.
• You may hear sound hopping and/or noise when you record and play back at the
same time due to high load on the CPU. However, the noise should not be in the
recording itself. Such noise should only be found in the playback signal.
• The standard driver that comes with Mac OS is not ASIO compatible.
29
UA-1X_ALL.book 30 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 31 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
Computer
USB
connector
Application
UA-1X
31
UA-1X_ALL.book 32 ページ 2003年12月3日 水曜日 午後2時50分
1
2
3
32
UA-1X_ALL.book 33 ページ 2003年12月3日 水曜日 午後2時50分
2
fig.02-03.e
3
4
5
fig.02-04.e
6
English
1
33
UA-1X_ALL.book 34 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.02-05.e
3
fig.02-06.e
4
34
Wenn dieses Dialogfeld nicht
angezeigt wird, lesen Sie
bitte Problems related to
the USB driver (S. 111).
UA-1X_ALL.book 35 ページ 2003年12月3日 水曜日 午後2時50分
5
English
fig.02-08.e
6
7
fig.02-09.e
Italiano
35
UA-1X_ALL.book 36 ページ 2003年12月3日 水曜日 午後2時50分
8
fig.02-11.e
9
fig.02-12.e
10
36
UA-1X_ALL.book 37 ページ 2003年12月3日 水曜日 午後2時50分
11
English
fig.02-13.e
Italiano
12
fig.02-14.e
37
UA-1X_ALL.book 38 ページ 2003年12月3日 水曜日 午後2時50分
1
2
38
UA-1X_ALL.book 39 ページ 2003年12月3日 水曜日 午後2時50分
5
Italiano
4
3
English
39
UA-1X_ALL.book 40 ページ 2003年12月3日 水曜日 午後2時50分
1
fig.05-16ae_30
Windows Me-Anwender
fig.02-17.e.eps
40
UA-1X_ALL.book 41 ページ 2003年12月3日 水曜日 午後2時50分
Wave
SW Synth
* 1
* 2
2
English
41
UA-1X_ALL.book 42 ページ 2003年12月3日 水曜日 午後2時50分
2.
3.
2.
3.
4.
2.
42
UA-1X_ALL.book 43 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
Computer
USB
connector
Application
fig.05-01.e
UA-1X
43
UA-1X_ALL.book 44 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.03-02.e
3
4
5
6
44
UA-1X_ALL.book 45 ページ 2003年12月3日 水曜日 午後2時50分
7
English
8
2
1
UA-1X_ALL.book 46 ページ 2003年12月3日 水曜日 午後2時50分
3
fig.03-07.e
4
fig.03-08.e
5
46
UA-1X_ALL.book 47 ページ 2003年12月3日 水曜日 午後2時50分
English
6
47
UA-1X_ALL.book 48 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.macX-1
3
48
UA-1X_ALL.book 49 ページ 2003年12月3日 水曜日 午後2時50分
4
English
figmacX-2, macOSX-3.
5
figmacX-2, macOSX-3.
49
UA-1X_ALL.book 50 ページ 2003年12月3日 水曜日 午後2時50分
50
UA-1X_ALL.book 51 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
Computer
USB
connector
Application
Italiano
fig.05-01.e
UA-1X
51
UA-1X_ALL.book 52 ページ 2003年12月3日 水曜日 午後2時50分
1
2
3
52
UA-1X_ALL.book 53 ページ 2003年12月3日 水曜日 午後2時50分
fig.02-03.e
3
4
5
2
fig.02-04.e
6
English
53
1
UA-1X_ALL.book 54 ページ 2003年12月3日 水曜日 午後2時50分
1
2
3
fig.02-06.e
4
54
Si cette boîte de dialogue ne
s’affiche pas, reportez-vous à
la section Problems related
to the USB driver (p. 111)
UA-1X_ALL.book 55 ページ 2003年12月3日 水曜日 午後2時50分
Connexions et installation des pilotes (Windows)
fig.02-07.e
5
English
fig.02-08.e
6
7
fig.02-09.e
Italiano
55
UA-1X_ALL.book 56 ページ 2003年12月3日 水曜日 午後2時50分
Connexions et installation des pilotes (Windows)
fig.02-10.e
8
fig.02-11.e
9
fig.02-12.e
10
56
UA-1X_ALL.book 57 ページ 2003年12月3日 水曜日 午後2時50分
11
English
fig.02-13.e
Italiano
12
fig.02-14.e
57
UA-1X_ALL.book 58 ページ 2003年12月3日 水曜日 午後2時50分
1
2
58
UA-1X_ALL.book 59 ページ 2003年12月3日 水曜日 午後2時50分
5
Italiano
4
3
59
UA-1X_ALL.book 60 ページ 2003年12月3日 水曜日 午後2時50分
1
fig.05-16ae_30
Windows Me
fig.02-17.e.eps
Windows 2000/Windows 98
fig.02-18.e.eps
60
UA-1X_ALL.book 61 ページ 2003年12月3日 水曜日 午後2時50分
Wave
SW Synth
* 1
* 2
CD Player
USB Audio
(Speaker)
2
English
61
UA-1X_ALL.book 62 ページ 2003年12月3日 水曜日 午後2時50分
2.
3.
Windows Me :
1.
2.
3.
4.
Windows 98 :
1.
2.
62
UA-1X_ALL.book 63 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
USB
connector
Computer
UA-1X
Italiano
Application
fig.05-01.e
63
UA-1X_ALL.book 64 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.03-02.e
3
4
5
6
64
UA-1X_ALL.book 65 ページ 2003年12月3日 水曜日 午後2時50分
7
English
8
Italiano
2
1
UA-1X_ALL.book 66 ページ 2003年12月3日 水曜日 午後2時50分
3
fig.03-07.e
4
fig.03-08.e
5
66
UA-1X_ALL.book 67 ページ 2003年12月3日 水曜日 午後2時50分
English
6
67
UA-1X_ALL.book 68 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.macX-1
3
figmacX-2, macOSX-3.
4
68
UA-1X_ALL.book 69 ページ 2003年12月3日 水曜日 午後2時50分
English
5
Italiano
69
UA-1X_ALL.book 70 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 71 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
Computer
USB
connector
Application
fig.05-01.e
UA-1X
71
UA-1X_ALL.book 72 ページ 2003年12月3日 水曜日 午後2時50分
■ Utenti Windows XP/2000
1
2
3
72
UA-1X_ALL.book 73 ページ 2003年12月3日 水曜日 午後2時50分
■ Utenti Windows Me
2
fig.02-03.e
3
4
5
fig.02-04.e
6
English
Italiano
1
73
UA-1X_ALL.book 74 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.02-05.e
3
fig.02-06.e
4
74
Se questa finestra non
appare, fare riferimento a
Problems related to the
USB driver (pag. 111).
UA-1X_ALL.book 75 ページ 2003年12月3日 水曜日 午後2時50分
5
English
fig.02-08.e
6
Fare clic su [Avanti].
7
fig.02-09.e
fig.02-10.e
8
75
UA-1X_ALL.book 76 ページ 2003年12月3日 水曜日 午後2時50分
9
fig.02-12.e
10
76
UA-1X_ALL.book 77 ページ 2003年12月3日 水曜日 午後2時50分
11
English
fig.02-13.e
fig.02-14.e
Italiano
12
77
UA-1X_ALL.book 78 ページ 2003年12月3日 水曜日 午後2時50分
1
2
78
UA-1X_ALL.book 79 ページ 2003年12月3日 水曜日 午後2時50分
5
Italiano
4
3
79
UA-1X_ALL.book 80 ページ 2003年12月3日 水曜日 午後2時50分
1
fig.05-16ae_30
Utenti Windows Me
fig.02-17.e.eps
Utenti Windows 2000 /Utenti Windows 98
fig.02-18.e.eps
80
UA-1X_ALL.book 81 ページ 2003年12月3日 水曜日 午後2時50分
Wave
SW Synth
* 1
* 2
Italiano
2
English
81
UA-1X_ALL.book 82 ページ 2003年12月3日 水曜日 午後2時50分
2.
3.
Utenti Windows Me:
1.
2.
3.
4.
Utenti Windows 98:
1.
2.
82
UA-1X_ALL.book 83 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
Computer
USB
connector
UA-1X
Italiano
Application
fig.05-01.e
83
UA-1X_ALL.book 84 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.03-02.e
3
4
5
6
84
Fare clic sulla scheda Devices and Volumes.
UA-1X_ALL.book 85 ページ 2003年12月3日 水曜日 午後2時50分
7
English
8
2
Nel menu Apple,
selezionare Control
Panels - Sound per
aprire la finestra
Sound.
1
Fare clic sulla
scheda Speakers
o Speaker Settings.
85
UA-1X_ALL.book 86 ページ 2003年12月3日 水曜日 午後2時50分
3
fig.03-07.e
4
fig.03-08.e
5
Nella finestra di dialogo
Sound, fare clic sulla
scheda Input.
In Choose a source for
sound input: selezionare
USB audio.
* Non selezionare “Play sound
through output device.”
86
UA-1X_ALL.book 87 ページ 2003年12月3日 水曜日 午後2時50分
English
6
87
UA-1X_ALL.book 88 ページ 2003年12月3日 水曜日 午後2時50分
1
2
Aprire la finestra di dialogo System Preference e
fare clic su Sound.
fig.macX-1
3
Nella scheda Sound
Effects fare clic su
Play alerts and
sound effects
through e selezionare
USB Audio CODEC
come periferica di
riproduzione per gli
effetti sonori.
figmacX-2, macOSX-3.
4
88
UA-1X_ALL.book 89 ページ 2003年12月3日 水曜日 午後2時50分
English
5
Problemi noti: UA-1X
89
UA-1X_ALL.book 90 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 91 ページ 2003年12月3日 水曜日 午後2時50分
USB
Driver
Computer
USB
connector
Application
UA-1X
91
UA-1X_ALL.book 92 ページ 2003年12月3日 水曜日 午後2時50分
■ Usuarios de Windows XP/2000
1
2
3
92
UA-1X_ALL.book 93 ページ 2003年12月3日 水曜日 午後2時50分
■ Usuarios de Windows Me
fig.02-03.e
3
4
5
fig.02-04.e
6
93
2
English
1
UA-1X_ALL.book 94 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.02-05.e
3
4
94
UA-1X_ALL.book 95 ページ 2003年12月3日 水曜日 午後2時50分
5
English
fig.02-08.e
6
7
fig.02-09.e
95
UA-1X_ALL.book 96 ページ 2003年12月3日 水曜日 午後2時50分
8
fig.02-11.e
9
fig.02-12.e
10
96
UA-1X_ALL.book 97 ページ 2003年12月3日 水曜日 午後2時50分
11
English
fig.02-13.e
Italiano
12
fig.02-1
97
UA-1X_ALL.book 98 ページ 2003年12月3日 水曜日 午後2時50分
1
2
98
UA-1X_ALL.book 99 ページ 2003年12月3日 水曜日 午後2時50分
5
4
3
English
99
UA-1X_ALL.book 100 ページ 2003年12月3日 水曜日 午後2時50分
1
fig.05-16ae_30
Usuarios de Windows Me
fig.02-17.e.eps
Usuarios de Windows 2000/usuarios de Windows 98
fig.02-18.e.eps
100
UA-1X_ALL.book 101 ページ 2003年12月3日 水曜日 午後2時50分
Onda
Sintetizador
SW
* 1
* 2
Italiano
2
English
101
UA-1X_ALL.book 102 ページ 2003年12月3日 水曜日 午後2時50分
2.
3.
Usuarios de Windows Me:
1.
2.
3.
4.
Usuarios de Windows 98:
1.
2.
102
UA-1X_ALL.book 103 ページ 2003年12月3日 水曜日 午後2時50分
English
USB
Driver
USB
connector
Computer
Application
fig.05-01.e
UA-1X
103
UA-1X_ALL.book 104 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.03-02.e
3
4
5
6
104
Haga clic en la ficha Devices and Volumes.
UA-1X_ALL.book 105 ページ 2003年12月3日 水曜日 午後2時50分
7
English
8
Italiano
2
1
Haga clic en la ficha
Speaker o Speaker
Settings.
105
UA-1X_ALL.book 106 ページ 2003年12月3日 水曜日 午後2時50分
3
fig.03-07.e
4
fig.03-08.e
5
En el cuadro de diálogo
Sound, haga clic en
la ficha Input.
En la opción Choose
a source for sound input,
seleccione USB audio.
* No active “Play sound
through output device.”
106
UA-1X_ALL.book 107 ページ 2003年12月3日 水曜日 午後2時50分
English
Italiano
6
107
UA-1X_ALL.book 108 ページ 2003年12月3日 水曜日 午後2時50分
1
2
fig.macX-1
3
figmacX-2, macOSX-3.
4
108
UA-1X_ALL.book 109 ページ 2003年12月3日 水曜日 午後2時50分
English
5
109
UA-1X_ALL.book 110 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 111 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
If an unexpected problem occurs while using the UA-1X, please read this chapter
first. It provides numerous hints that will help you solve problems.
The problems covered in the troubleshooting section are organized according
to the operating system on which the problem might be encountered.
The problems covered in the troubleshooting section are organized according to
the operating system on which the problem might be encountered. Use the icon
shown at the left of the title to find the information you need.
Problems common to both Windows and Macintosh
Problems that occur only on Windows
Problems that occur only on Macintosh
Troubleshooting
If you are using computer for the first time, or do not understand the explanation
of a procedure, refer to the owner’s manuals for your computer or for OS.
If the UA-1X does not operate as you expect, check the following points.
Problems related to the USB driver
“Add New Hardware Wizard” does not start up
automatically
“Add New Hardware Wizard” terminates before
completion
•
•
•
When the USB cable is connected or disconnected, approximately
15 seconds (or more) may be required for the UA-1X to be recognized.
Is the USB cable connected correctly?
Make sure that the UA-1X and computer are connected correctly by the
USB cable.
Can USB be used on your computer?
Refer to the owner’s manual for your computer, and make sure that it is able
to use USB.
111
UA-1X_ALL.book 112 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
•
Does your computer or USB hub have sufficient power supply capacity?
The UA-1X cannot be connected if insufficient power is supplied to it. Check
whether one of the following cases apply.
If you are using the UA-1X with a notebook computer that is running on its
battery, operation may be unreliable with some models of computer. If this is
the case, connect the AC adaptor to your notebook computer.
The power conservation mode of your computer may limit the power that is
supplied to USB. Check the settings of your computer.
In some cases, the UA-1X cannot be used with a bus-powered hub (a hub that
does not contain a power supply). Please use a self-powered hub (a hub that
contains a power supply).
•
Does your computer meet the USB specifications?
If you are using a computer that does not meet the USB specifications (such as a
homemade computer), operation may be unstable. In such cases, you may be able
to solve the problem by connecting a USB hub that contains a power supply.
•
Is “Unknown Device” displayed for “Other devices” or “Universal Serial
Bus controllers”?
Use the following procedure to delete “Unknown Device” from “Other
devices” (Universal serial bus controller), and re-start your computer.
1.
In the Windows Control Panel, double-click System to open the System
Properties dialog box. The System Properties dialog box will appear.
2.
Click the Device Manager tab.
3.
Double-click Other devices (Universal Serial Bus controllers) to see the list
of devices.
4.
From the list, select the unknown device and click Delete.
* In order to check whether or not the “Unknown Device” is the UA-1X,
disconnect the USB cable of the UA-1X, and verify that “Unknown Device”
has disappeared. Then connect the UA-1X once again, and delete “Unknown
Device.”
5.
In the Confirm Device Removal dialog box, click [OK].
6.
Verify that “Other device” or “Unknown device” is not displayed in the
list, and click [Close] to close the dialog box.
The “Add New Hardware Wizard” dialog box appears even
though you installed the drivers
If your computer or USB hub has two or more USB connectors, connecting the
UA-1X to a USB connector to which the UA-1X has never before been connected
may cause the Add New Hardware Wizard dialog box will appear even though
the drivers have already been installed.
Install the drivers once again as described in Connections and Driver
Installation (Windows) (p. 13). This is not a malfunction.
112
UA-1X_ALL.book 113 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
The UA-1X Driver Is Not Installed Correctly.
Use the procedure described in Deleting the USB Audio Device Driver
(Windows) (p. 119) to delete the USB Audio Device driver installed in your
computer, and install the UA-1X drivers once again as described in Connections
and Driver Installation (Windows) (p. 13). Check whether there is an item
named “Unknown Device” in “Other devices” or in “Universal Serial Bus
controllers.” If you find “Unknown Device”, delete it.
A dialog box saying “Unknown Device found” appears,
and I can’t install the driver
•
Depending on your computer, not all of the Windows files required to
support audio over USB may have been installed when the computer was
shipped.
Please check with the manufacturer of your computer.
Problems when using the UA-1X
OS becomes unstable
•
Starting up a computer when the UA-1X is already connected may cause
the computer to become unstable.
If this occurs, start up the computer with the UA-1X disconnected, and then
connect the UA-1X. On a computer that uses a USB keyboard, starting up the
computer with the UA-1X already connected may cause operation to become
unstable. In this case, start up the computer with the UA-1X disconnected, and
then connect the UA-1X.
No sound
Å@fig.win
•
Are you attempting to use the CD player of your computer to play an
audio CD?
If you wish to play an audio CD on the CD-ROM drive of your computer, refer
to When using your computer’s CD-ROM drive to play an audio CD, or when
playing background music for games with the UA-1X (p. 22).
Å@fig.win
•
Are you running multiple applications?
If multiple applications are running simultaneously, an error message may
appear. If this occurs, click [OK], and close the other applications.
Even if an application window is closed, it is still running if it remains in the
taskbar, so be sure to quit any unneeded applications shown in the taskbar.
fig.winmac
•
Have you specified the audio data output destination for your operating
system?
You must specify the UA-1X as the audio data output destination for your
computer. For details on this setting, refer to Specifying the Audio Input/Output
Device (p. 19) or Adjusting the Sound Input/Output (p. 25).
113
UA-1X_ALL.book 114 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmac
•
Have the drivers been installed correctly?
In order to playback audio data using the UA-1X, the USB Audio Device driver
must be installed. For details on installation and settings, refer to Connections
and driver installation (Windows p. 13, Macintosh p. 23).
Å@fig.mac
•
If you are using Macintosh OS X, some system sound input/output
settings may cause there to be no sound from the Macintosh speakers.
Select “Internal speakers” in the Output tab. (→ Make Connections and System
Sound Input/Output Settings (p. 28))
fig.winmac
•
Could you have turned down the UA-1X's Headphones volume control?
Check this if you are using headphones.
fig.winmac
•
As soon as you connect the UA-1X to your computer, sound will no longer
be output from the speakers of your computer.
Connect external monitors or headphones to the UA-1X.
If you want sound to be output from your computer speakers, disconnect the
UA-1X from your computer.
Sound is distorted
•
•
Could the Input select switch be set to LOW?
The sound may be distorted if the INPUT SELECT switch is set to LOW and you
input an audio signal higher than -10 dBu from the line input jacks. Set the INPUT
SELECT switch to HIGH.
Could you have updated your software while the UA-1X was connected to
your computer?
Disconnect the UA-1X from your computer before you update your software.
The volume level of the instrument connected to LINE IN
is too low.
•
114
Could you be using a connection cable that contains a resistor?
Use a connection cable that does not contain a resistor.
UA-1X_ALL.book 115 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
Noise is heard when playing back audio
fig.winmacac
•
Noise is sometimes heard in the line input.
If a USB-compatible MIDI sound module and the UA-1X are connected via USB
to the same computer, and the outputs of the MIDI sound module are connected
to the line input jacks of the UA-1X, noise from your computer may be heard via
the MIDI sound module from the UA-1X, depending on the computer you are
using. If this occurs, you can either connect the MIDI sound module and the
UA-3D in parallel using a self-powered hub, or connect the MIDI sound module
via its serial or MIDI interface.
fig.winmacac
•
This problem may be solved by properly grounding the chassis of your
computer, or the ground prong of the plug on the AC power cord that was
supplied with your computer. Also, make sure that there are no devices
nearby that emit a strong magnetic field, such as a television or a
microwave oven.
fig.winmacac
•
Are a large number of audio devices connected?
If a large number of audio devices are connected, noise may occur. Do not
connect audio devices that you are not using.
fig.winmacac
•
If the sound is interrupted during audio playback, you may hear a soft
“pop” noise.
Also refer to the following section, “Sound is interrupted during audio
playback.”
Sound is interrupted during audio playback
fig.winmacac
•
Noise may be heard if you record and play back simultaneously.
If you record and play back simultaneously, the playback may be interrupted
depending on the performance of the system, and this may be heard as noise.
However since priority is given to recording, the recorded data will not be lost.
fig.win
•
Graphic accelerators may cause noise to be heard during audio playback.
Use the following procedure to set graphic acceleration to “None.”
* Some computers may not have all of the following settings.
1.
In the Windows Control Panel, double-click Display to open the Display
Properties dialog box, and click the Settings tab.
2.
Click Advanced to open properties, and click the Performance tab.
3.
In the Graphics section, set the Hardware acceleration slider to None,
and then click [OK].
4.
In the Display Properties dialog box, click [OK] to close the dialog box.
5.
Then restart your computer.
115
UA-1X_ALL.book 116 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmacac
•
Are many applications running on your computer?
If you use numerous applications during playback, or start up another
application, the playback may be interrupted depending on your computer
system. Exit all unneeded applications, and try again. If this does not resolve
the problem, try restarting your computer.
fig.win
•
Try making the following changes to the disk drive settings.
Some computers may not have the following settings.
1.
In the Windows Control Panel, double-click System.
2.
Click the Device Manager tab.
3.
Double-click Disk Drives to see the list of devices.
4.
From the list, select GENERIC IDE DISK TYPE**, and click Properties to
access the GENERIC IDE DISK TYPE** Properties dialog box.
* In the ** field of GENERIC IDE DISK TYPE**, there will be a number that
differs depending on your computing environment.
5.
Click the Settings tab, place a check mark in the check box for the DMA
option, and click [OK] to close the dialog box.
* Depending on your system, a dialog box for DMA settings may appear. Verify
the contents of the dialog box, and click [OK] or [Cancel].
6.
In System Properties dialog box, click [OK] to close the dialog box.
7.
Restart your computer so that the above settings will take effect.
fig.win
•
116
On some computers, the Power Management settings in the Control Panel
may cause audio playback to stop.
The Power Management Properties that are displayed when you double-click
Power Management will differ depending on your computer system. One
example is given below, but you should consult the owner’s manual for your
computer as well. Some computers may not have the following settings.
1.
Click the Windows Start button, and select Settings - Control Panel to
open the Control Panel.
2.
In Control Panel, double-click System to open the System Properties dialog.
3.
Double-click System devices to see the list of devices.
4.
Double-click System Devices to display the list of devices.
5.
From the list, select Advanced Power Management Support. Then click
Properties to open the Advanced Power Management Support
Properties dialog box.
6.
Click the Settings tab, and in Troubleshooting, place a check in the check
box for Don’t Poll Power Supply Status. Then click [OK].
7.
In the System Properties dialog box, click [OK].
8.
Restart Windows.
UA-1X_ALL.book 117 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
fig.winmacac
•
Try increasing the memory
You can increase the processing power of your computer by adding more
memory. For details on how to install more memory, refer to the operation
manual for your computer.
fig.winmacac
•
Does your computer meet the USB specifications?
The audio may be interrupted if you are using a computer that does not
electrically meet the USB specifications. In such cases, you may be able to solve
the problem by connecting a USB hub that contains a power supply.
A blank (silent) file is created when you record
fig.win
•
Try setting the bit rate to “16bit.”
If you are using Windows98 Second Edition, and your recording software is set
to a bit rate of 8 bits, a blank file may be created, so that you may not be able to
record effectively. If this occurs, you will be able to record correctly by setting the
bit rate to “16 bit.”
Noise is present in the recorded sound
Depending on the virtual memory setting or network-related settings, noise
may occur.
Please make the following settings before use.
• In Chooser of the Apple menu, set AppleTalk to “Inactive.”
(This setting is not changed as a result of turning off AppleTalk, as requested
by OMS when sequencer software is started up. You must change the setting
yourself using the “Chooser.”)
• In the “Memory” Control Panel, set Virtual Memory to “Off.”
• Depending on the way in which you connect to the Internet, use the UA-1X with
the following settings.
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
If you connect to the Internet via the internal modem port, or are not
connected to the Internet
In the “TCP/IP” Control Panel, set “Connect via” to “PPP.”
After you have made the settings, restart your Macintosh.
•
•
* Do not use software that accesses the network (such as a Web browser) at the same
time that you are using sequencer software or audio editing software.
In the SimpleSound application that is included with MacOS, noise will
be heard in the sound if it is played back immediately after being digitally
recorded. Save the sound first, then try playing it back.
Update the Mac OS.
The Mac OS can be downloaded from the Apple web site.
117
UA-1X_ALL.book 118 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
Checking the USB audio driver
1.
Connect the UA-1X to the computer.
2.
Click the Apple menu, and select Apple System Profiler.
3.
Click the Devices and Volumes tab control.
4.
In the USB section, the screen will indicate “Audio (USB Audio Device).”
Click the arrow at the left of this text.
5.
The number displayed to the right of “Driver version” is the version of the
USB audio driver.
Game background music does not sound
•
Is the Background Music for the Game on an Audio CD?
If the game uses an audio CD for background music, refer to When using your
computer’s CD-ROM drive to play an audio CD, or when playing
background music for games with the UA-1X (p. 22).
The volume changed when you resumed from Suspend
or Hibernation status
•
118
When Windows 2000 resumes from Suspend or Hibernation, the output
volume setting is changed due to a problem of Windows.
Start up the Mixer application as described in Volume Control Settings (p. 20),
and adjust the USB Audio (Speaker) slider.
UA-1X_ALL.book 119 ページ 2003年12月3日 水曜日 午後2時50分
Troubleshooting
Deleting the USB Audio Device Driver (Windows)
● If re-installing the USB Audio Device driver
● If installation of the USB Audio Device driver was terminated before completion
Use the following procedure to delete the driver that is already installed.
Depending on your computer, some of the folder names may be different.
1.
Use a USB cable to connect the UA-1X to your computer.
2.
Delete the USB Audio Device driver. Click the Windows Start button, and
select Settings - Control Panel. (In Windows XP, click the Start button
and then click Control Panel.)
3.
In Control Panel, double-click System to open the “System Properties”
dialog. (In Windows XP, Performance and Maintenance | System.)
4.
Click the Device Manager tab. (In Windows XP, Hardware tab | Device
Manager.)
5.
Double-click Sound, video and game controllers to see a list of the
devices.
6.
From the list, select USB Audio Device, and click Remove (In Windows
XP, Disable). In the Confirm Device Removal dialog box, click [OK].
If USB Audio Device is not displayed, proceed to step 8.
* If a dialog box suggesting that you restart Windows appears at this point, follow
the suggestion and restart your computer.
7.
Make sure that USB Audio Device is not in the Sound, video and game
controllers list, and click [Close] to close the System Properties dialog.
8.
Follow the steps 1.–4. again, and double-click Universal Serial Bus
controllers to display the list of devices.
If
is displayed for the USB-compatible device icon:
Select the [USB Composite Device] icon, and click [Remove]. In the
Confirm Device Removal dialog box, click [OK]. As in the step 7., close
System Properties.
If there is no USB-compatible device icon, or if
Simply close System Properties.
If you are using Windows Me and
Simply close System Properties.
9.
is not displayed:
is displayed:
Disconnect the USB cable from your computer, and restart Windows.
119
UA-1X_ALL.book 120 ページ 2003年12月3日 水曜日 午後2時50分
Specifications
UA-1X: USB Audio Interface
●Number of Audio Record/Playback Channels
Record: 1 pair of stereo
Playback: 1 pair of stereo
●Signal Processing
PC interface: 16 bits
●Sampling Frequency
Digital output: 32/44.1/48 kHz
●Nominal Input Level
Line input jacks: -10 dBu (LOW)/+4 dBu (HIGH)
●Nominal Output Level
Line output jacks: -10 dBu
●Interface
USB
Digital output
Optical type (confirms to S/P DIF consumer format)
●Connectors
Line Input jacks (L, R): RCA phono type
Line Output jacks (L, R): RCA phono type
Headphones jack (Stereo miniature phone type)
Digital Output connector (Optical type)
* The same jack serves as both the headphones jack and digital output connector.
●Power Supply
Supplied from the computer
●Current Draw
100 mA
●Dimensions
90 (W) x 60 (D) x 23 (H) mm
3-9/16 (W) x 2-3/8 (D) x 15/16 (H) inches
●Weight
120 g/ 5 oz
●Accessories
Owner's Manual
(0 dBu = 0.775 V rms)
962a
* In the interest of product improvement, the specifications and/or appearance of
this unit are subject to change without prior notice.
120
UA-1X_ALL.book 121 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
UA-1X_ALL.book 122 ページ 2003年12月3日 水曜日 午後2時50分
MEMO
To resize thickness, move all items on the front cover
and registration marks to left or right.
For EU Countries
This product complies with the requirements of European Directive 89/336/EEC.
For the USA
The
symbol alerts the user to important instructions
or warnings.The specific meaning of the symbol is
determined by the design contained within the
triangle. In the case of the symbol at left, it is used for
general cautions, warnings, or alerts to danger.
Used for instructions intended to alert
the user to the risk of death or severe
injury should the unit be used
improperly.
Used for instructions intended to alert
the user to the risk of injury or material
damage should the unit be used
improperly.
* Material damage refers
other adverse effects
respect to the home
furnishings, as well
animals or pets.
The
symbol alerts the user to items that must never
be carried out (are forbidden). The specific thing that
must not be done is indicated by the design contained
within the circle. In the case of the symbol at left, it
means that the unit must never be disassembled.
to damage or
caused with
and all its
to domestic
The ● symbol alerts the user to things that must be
carried out. The specific thing that must be done is
indicated by the design contained within the circle. In
the case of the symbol at left, it means that the powercord plug must be unplugged from the outlet.
FEDERAL COMMUNICATIONS COMMISSION
RADIO FREQUENCY INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
001
• Before using this unit, make sure to
read the instructions below, and the
Owner’s Manual.
..................................................................................................
002a
• Do not open or perform any internal
modifications on the unit.
..................................................................................................
003
• Do not attempt to repair the unit, or
replace parts within it (except when
this manual provides specific instructions directing you to do so). Refer all
servicing to your retailer, the nearest
EDIROL/Roland Service Center, or an
authorized EDIROL/Roland
distributor, as listed on the “Information”
page.
..................................................................................................
004
• Never use or store the unit in places
that are:
• Subject to temperature extremes
(e.g., direct sunlight in an enclosed
vehicle, near a heating duct, on top
of heat-generating equipment); or are
• Damp (e.g., baths, washrooms, on wet
floors); or are
• Humid; or are
• Exposed to rain; or are
• Dusty; or are
• Subject to high levels of vibration.
..................................................................................................
2
007
• Make sure you always have the unit
placed so it is level and sure to remain
stable. Never place it on stands that
could wobble, or on inclined surfaces.
..................................................................................................
010
• This unit, either alone or in combination with an amplifier and
headphones or speakers, may be
capable of producing sound levels that
could cause permanent hearing loss.
Do not operate for a long period of
time at a high volume level, or at a
level that is uncomfortable. If you
experience any hearing loss or ringing
in the ears, you should immediately
stop using the unit, and consult an
audiologist.
..................................................................................................
011
• Do not allow any objects (e.g.,
flammable material, coins, pins); or
liquids of any kind (water, soft drinks,
etc.) to penetrate the unit.
..................................................................................................
Unauthorized changes or modification to this system can void the users authority to operate this equipment.
This equipment requires shielded interface cables in order to meet FCC class B Limit.
For Canada
NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
For the USA
DECLARATION OF CONFORMITY
Compliance Information Statement
Model Name :
Type of Equipment :
Responsible Party :
Address :
Telephone :
UA-1X
USB Audio Interface
Edirol Corporation North America
425 Sequoia Drive, Suite 114, Bellingham, WA 98226
(360) 594-4276
To resize thickness, move all items on the front cover
and registration marks to left or right.
Information
When you need repair service, call your nearest EDIROL/Roland Service Center or authorized EDIROL/Roland distributor
in your country as shown below.
EUROPE
EDIROL (Europe) Ltd.
U. S. A. / CANADA
EDIROL Corporation North
America
425 Sequoia Drive, Suite 114
Bellingham, WA 98226
U. S. A.
TEL: (360) 594-4276
FAX: (360) 594-4271
http://www.edirol.com/
HONG KONG
Parsons Music Ltd.
8th Floor, Railway Plaza, 39
Chatham Road South, T.S.T,
Kowloon, HONG KONG
TEL: 2333 1863
INDIA
Rivera Digitec (India) Pvt. Ltd.
409, Nirman Kendra Mahalaxmi
Flats Compound Off. Dr. Edwin
Moses Road, Mumbai-400011,
INDIA
TEL: (022) 2493 9051
INDONESIA
PT Citra IntiRama
J1. Cideng Timur No. 15J-150
Jakarta Pusat
INDONESIA
TEL: (021) 6324170
KOREA
Cosmos Corporation
1461-9, Seocho-Dong,
Seocho Ku, Seoul, KOREA
TEL: (02) 3486-8855
MALAYSIA
AFRICA
EGYPT
Al Fanny Trading Office
9, EBN Hagar A1 Askalany Street,
ARD E1 Golf, Heliopolis,
Cairo 11341, EGYPT
TEL: 20-2-417-1828
REUNION
Maison FO - YAM Marcel
25 Rue Jules Hermann,
Chaudron - BP79 97 491
Ste Clotilde Cedex,
REUNION ISLAND
TEL: (0262) 218-429
SOUTH AFRICA
That Other Music Shop
(PTY) Ltd.
11 Melle St., Braamfontein,
Johannesbourg, SOUTH AFRICA
P.O.Box 32918, Braamfontein 2017
Johannesbourg, SOUTH AFRICA
TEL: (011) 403 4105
BENTLEY MUSIC SDN BHD
140 & 142, Jalan Bukit Bintang
55100 Kuala Lumpur, MALAYSIA
TEL: (03) 2144-3333
PHILIPPINES
G.A. Yupangco & Co. Inc.
339 Gil J. Puyat Avenue
Makati, Metro Manila 1200,
PHILIPPINES
TEL: (02) 899 9801
SINGAPORE
CRISTOFORI MUSIC PTE
LTD
Blk 3014, Bedok Industrial Park E,
#02-2148, SINGAPORE 489980
TEL: 6243-9555
TAIWAN
ARGENTINA
Instrumentos Musicales S.A.
Av.Santa Fe 2055
(1123) Buenos Aires
ARGENTINA
TEL: (011) 4508-2700
CHILE
Comercial Fancy II S.A.
Rut.: 96.919.420-1
Nataniel Cox #739, 4th Floor
Santiago - Centro, CHILE
TEL: (02) 688-9540
MEXICO
Casa Veerkamp, s.a. de c.v.
Av. Toluca No. 323, Col. Olivar
de los Padres 01780 Mexico D.F.
MEXICO
TEL: (55) 5668-6699
URUGUAY
Todo Musica S.A.
Francisco Acuna de Figueroa 1771
C.P.: 11.800
Montevideo, URUGUAY
TEL: (02) 924-2335
VENEZUELA
Musicland Digital C.A.
Av. Francisco de Miranda,
Centro Parque de Cristal, Nivel
C2 Local 20 Caracas
VENEZUELA
TEL: (212) 285-8586
ROLAND TAIWAN
ENTERPRISE CO., LTD.
AUSTRIA
Room 5, 9fl. No. 112 Chung Shan
N.Road Sec.2, Taipei, TAIWAN,
R.O.C.
TEL: (02) 2561 3339
Siemensstrasse 4, P.O. Box 74,
A-6063 RUM, AUSTRIA
TEL: (0512) 26 44 260
THAILAND
Theera Music Co. , Ltd.
17 Werdmuller Centre,
Main Road, Claremont 7708
SOUTH AFRICA
330 Verng NakornKasem, Soi 2,
Bangkok 10100, THAILAND
TEL: (02) 2248821
P.O.BOX 23032, Claremont 7735,
SOUTH AFRICA
TEL: (021) 674 4030
ASIA
Saigon Music
Suite DP-8
40 Ba Huyen Thanh Quan Street
Hochiminh City, VIETNAM
Tel: (08) 930-1969
Roland Austria GES.M.B.H.
BELGIUM/HOLLAND/
LUXEMBOURG
Roland Benelux N. V.
Houtstraat 3, B-2260, Oevel
(Westerlo) BELGIUM
TEL: (014) 575811
CZECH REP.
K-AUDIO
Kardasovska 626.
CZ-198 00 Praha 9,
CZECH REP.
TEL: (2) 666 10529
CHINA
Roland Shanghai Electronics
Co.,Ltd.
5F. No.1500 Pingliang Road
Shanghai 200090, CHINA
TEL: (021) 5580-0800
Roland Shanghai Electronics
Co.,Ltd.
(BEIJING OFFICE)
10F. No.18 Anhuaxili
Chaoyang District, Beijing 100011
CHINA
TEL: (010) 6426-5050
Roland Shanghai Electronics
Co.,Ltd.
(GUANGZHOU OFFICE)
2/F., No.30 Si You Nan Er Jie Yi
Xiang, Wu Yang Xin Cheng,
Guangzhou 510600, CHINA
Tel: (020) 8736-0428
AUSTRALIA/
NEW ZEALAND
AUSTRALIA
Roland Corporation
Australia Pty., Ltd.
38 Campbell Avenue
Dee Why West. NSW 2099
AUSTRALIA
TEL: (02) 9982 8266
NEW ZEALAND
Roland Corporation Ltd.
32 Shaddock Street, Mount Eden,
Auckland, NEW ZEALAND
TEL: (09) 3098 715
DENMARK
Roland Scandinavia A/S
Nordhavnsvej 7, Postbox 880,
DK-2100 Copenhagen
DENMARK
TEL: 3916 6200
FRANCE
Roland France SA
4, Rue Paul Henri SPAAK,
Parc de l'Esplanade, F 77 462 St.
Thibault, Lagny Cedex FRANCE
TEL: 01 600 73 500
FINLAND
Roland Scandinavia As,
Filial Finland
Elannontie 5
FIN-01510 Vantaa, FINLAND
TEL: (0)9 68 24 020
UNITED KINGDOM
Roland (U.K.) Ltd.
Atlantic Close, Swansea
Enterprise Park, SWANSEA
SA7 9FJ,
UNITED KINGDOM
TEL: (01792) 702701
STOLLAS S.A.
Music Sound Light
155, New National Road
Patras 26442, GREECE
TEL: 2610 435400
HUNGARY
Roland East Europe Ltd.
Warehouse Area ‘DEPO’ Pf.83
H-2046 Torokbalint, HUNGARY
TEL: (23) 511011
IRELAND
Roland Ireland
G2 Calmount Park, Calmount
Avenue, Dublin 12
Republic of IRELAND
TEL: (01) 4294444
ITALY
Roland Italy S. p. A.
Viale delle Industrie 8,
20020 Arese, Milano, ITALY
TEL: (02) 937-78300
NORWAY
Roland Scandinavia Avd.
Kontor Norge
Lilleakerveien 2 Postboks 95
Lilleaker N-0216 Oslo
NORWAY
TEL: 2273 0074
POLAND
MX MUSIC SP.Z.O.O.
UL. Gibraltarska 4.
PL-03664 Warszawa POLAND
TEL: (022) 679 44 19
PORTUGAL
Tecnologias Musica e Audio,
Roland Portugal, S.A.
Cais Das Pedras, 8/9-1 Dto
4050-465 PORTO
PORTUGAL
TEL: (022) 608 00 60
Moon Stores
No.16, Bab Al Bahrain Avenue,
P.O.Box 247, Manama 304,
State of BAHRAIN
TEL: 211 005
CYPRUS
Radex Sound Equipment Ltd.
17, Diagorou Street, Nicosia,
CYPRUS
TEL: (022) 66-9426
IRAN
MOCO, INC.
No.41 Nike St., Dr.Shariyati Ave.,
Roberoye Cerahe Mirdamad
Tehran, IRAN
TEL: (021) 285-4169
ISRAEL
Halilit P. Greenspoon &
Sons Ltd.
8 Retzif Ha’aliya Hashnya St.
Tel-Aviv-Yafo ISRAEL
TEL: (03) 6823666
JORDAN
AMMAN Trading Agency
KUWAIT
Easa Husain Al Yousifi Est.
Abdullah Salem Street,
Safat, KUWAIT
TEL: 243-6399
QATAR
Piata Libertatii 1,
535500 Gheorgheni, ROMANIA
TEL: (266) 364 609
Badie Studio & Stores
MuTek
3-Bogatyrskaya Str. 1.k.l
107 564 Moscow, RUSSIA
TEL: (095) 169 5043
SWEDEN
Roland Scandinavia A/S
SWEDISH SALES OFFICE
Danvik Center 28, 2 tr.
S-131 30 Nacka SWEDEN
TEL: (0)8 702 00 20
P.O. Box 62,
Doha, QATAR
TEL: 423554
Before using this unit, carefully read the sections entitled: “USING
THE UNIT SAFELY” (p. 2–3) and “IMPORTANT NOTES” (p. 4).
These sections provide important information concerning the proper
operation of the unit. Additionally, in order to feel assured that you
have gained a good grasp of every feature provided by your new unit,
Getting Started should be read in its entirety. The manual should be
saved and kept on hand as a convenient reference.
SAUDI ARABIA
aDawliah Universal
Electronics APL
Corniche Road, Aldossary Bldg.,
1st Floor, Alkhobar,
SAUDI ARABIA
P.O.Box 2154, Alkhobar 31952
SAUDI ARABIA
TEL: (03) 898 2081
SYRIA
Technical Light & Sound
Center
Khaled Ebn Al Walid St.
Bldg. No. 47, P.O.BOX 13520,
Damascus, SYRIA
TEL: (011) 223-5384
TURKEY
Ant Muzik aletleri ithalat ve
ihracat Ltd Sti
Siraselviler Caddesi Siraselviler
Pasaji No:74/20
Taksim - Istanbul, TURKEY
TEL: (0212) 2499324
UKRAINE
U.A.E.
TIC-TAC
Zak Electronics & Musical
Instruments Co. L.L.C.
Mira Str. 19/108
P.O. Box 180
295400 Munkachevo, UKRAINE
TEL: (03131) 414-40
Owner’s Manual
Bedienungsanleitung
Mode d’emploi
Manuale d’uso
Manual del usuario
245 Prince Mohammad St.,
Amman 1118, JORDAN
TEL: (06) 464-1200
Owner’s Manual
Studio 3.4 114 Power Road
London W4 5PY
U. K.
TEL: +44 (0)20 8747 5949
FAX:+44 (0)20 8747 5948
http://www.edirol.com/europe
Zabeel Road, Al Sherooq Bldg.,
No. 14, Grand Floor, Dubai, U.A.E.
TEL: (04) 3360715
As of November 1, 2003 (EDIROL-1)
03341712
2KG
Copyright © 2003 ROLAND CORPORATION
All rights reserved. No part of this publication may be reproduced in any
form without the written permission of ROLAND CORPORATION.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages

Only pages of the document in English were displayed