Samsung LN40B540, LN52B540P8F, LN46B540, LN52B540, LN40B540P8F, LN46B540P8F User manual

Contact SAMSUNG WORLDWIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
Country
CANADA
U.S.A
Customer Care Center
1-800-SAMSUNG(726-7864)
1-800-SAMSUNG(726-7864)
Web Site
www.samsung.com/ca
www.samsung.com/us
Address
Samsung Electronics Canada Inc., Customer
Service 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronique Canada Inc., Service
à la Clientèle 55 Standish Court Mississauga,
Ontario L5R 4B2 Canada
Samsung Electronics America, Inc.
105 Challenger Road
Ridgefield Park, NJ 07660-0511
LCD TV
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/register
Model
Serial No.
BN68-01883B-00
BN68-01883B-00L02.indb 1
2009-02-27 �� 10:56:47
❑ Important Warranty Information Regarding Television Format Viewing
N See the warranty card for more information on warranty terms.
Wide screen format LCD Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen
format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to
fill the screen if your model offers this feature and the images are constantly moving. Displaying stationary graphics and images
on screen, such as the dark sidebars on nonexpanded standard format television video and programming, should be limited to no
more than 5% of the total television viewing per week.
Additionally, viewing other stationary images and text such as stock market reports, video game displays, station logos, web sites
or computer graphics and patterns, should be limited as described above for all televisions. Displaying stationary images that
exceed the above guidelines can cause uneven aging of LCD Displays that leave subtle, but permanent burned-in ghost images in
the LCD picture. To avoid this, vary the programming and images, and primarily display full screen moving images, not stationary
patterns or dark bars.
On LCD models that offer picture sizing features, use these controls to view different formats as a full screen picture.
Be careful in the selection and duration of television formats used for viewing. Uneven LCD aging as a result of format selection
and use, as well as burned-in images, are not covered by your Samsung limited warranty.
● U.S.A Only
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
In particular, this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396,
5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481,643, 5,544,247, 5,960,037, 6,023,490, 5,878,080,
and under US Published Patent Application No. 2001-44713-A1.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
● Other countries
The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties.
This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted for
commercial use. The license does not cover any product unit other than this product unit and the license does not extend to
any unlicensed product unit or process conforming to ISO/IEC 11172-3 or ISO/IEC 13818-3 used or sold in combination with
this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the
ISO/IEC 11172-3 or ISO/IEC 13818-3. No rights are granted under this license for product features or functions that do not
conform to the ISO/IEC 11172-3 or ISO/IEC 13818-3.
● SAMSUNG ELECTRONICS NORTH AMERICAN LIMITED WARRANTY STATEMENT
Subject to the requirements, conditions, exclusions and limitations of the original Limited Warranty supplied with Samsung
Electronics (SAMSUNG) products, and the requirements, conditions, exclusions and limitations contained herein, SAMSUNG
will additionally provide Warranty Repair Service in the United States on SAMSUNG products purchased in Canada, and
in Canada on SAMSUNG products purchased in the United States, for the warranty period originally specified, and to the
Original Purchaser only.
The above described warranty repairs must be performed by a SAMSUNG Authorized Service Center. Along with this
Statement, the Original Limited Warranty Statement and a dated Bill of Sale as Proof of Purchase must be presented to the
Service Center. Transportation to and from the Service Center is the responsibility of the purchaser.
Conditions covered are limited only to manufacturing defects in material or workmanship, and only those encountered in
normal use of the product.
Excluded, but not limited to, are any originally specified provisions for, in-home or on-site services, minimum or maximum
repair times, exchanges or replacements, accessories, options, upgrades, or consumables.
For the location of a SAMSUNG Authorized Service Center, please call toll-free:
N In the United States : 1-800-SAMSUNG (1-800-726-7864)
N In Canada : 1-800-SAMSUNG
❑ Precautions When Displaying a Still Image
A still image may cause permanent damage to the TV screen
● Do not display a still image on the LCD panel for more than 2 hours as it can cause screen image retention. This image
retention is also known as “screen burn”. To avoid such image retention, reduce the degree of brightness and contrast of the
screen when displaying a still image.
●
Watching the LCD TV in 4:3 format for a long period of time may leave traces of borders displayed on the left,
right and center of the screen caused by the difference of light emission on the screen.
Playing a DVD or a game console may cause a similar effect to the screen.
Damages caused by the above effect are not covered by the Warranty.
● Displaying still images from Video games and PC for longer than a certain period of time may produce partial after-images.
To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still images.
© 2009 Samsung Electronics Co., Ltd. All rights reserved.
BN68-01883B-00L02.indb 1
2009-02-27 �� 10:56:47
English
Contents
General Information
Sound Control
■ List of Features......................................................................2
■ Accessories...........................................................................2
■ Viewing the Control Panel.....................................................3
■ Viewing the Connection Panel...............................................4
■ Remote Control.....................................................................5
■ Installing Batteries in the Remote Control.............................5
■ Configuring the Sound Menu...............................................21
Setup
■ Configuring the Setup Menu................................................22
Input / Support
Connections
■ Connecting VHF and UHF Antennas.....................................6
■ Connecting Cable TV............................................................6
■ Connecting a DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) via HDMI.............................7
■ Connecting a DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) via DVI................................8
■ Connecting a DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) via Component cables........8
■ Connecting a VCR.................................................................9
■ Connecting a Digital Audio System.......................................9
■ Connecting an Amplifier / DVD Home Theater....................10
■ Connecting a Camcorder....................................................11
■ Connecting a PC.................................................................12
Operation
■ Viewing the menus..............................................................13
■ Plug & Play Feature............................................................14
Channel Control
■ Configuring the Channel Menu............................................15
■ Managing Channels ...........................................................15
Picture Control
■ Configuring the Picture Menu..............................................17
■ Using Your TV as a Computer (PC) Display........................19
■ Setting up the TV with your PC...........................................20
■ Configuring the Input Menu.................................................26
■ Configuring the Support Menu............................................26
Media Play (USB)
■ Using the Media Play (USB) Function.................................27
■ Using the Media Play (USB) Menu......................................28
■ Using the PHOTO (JPEG) List............................................28
■ Using the MP3 List..............................................................30
Anynet+
■ Connecting Anynet+ Devices..............................................32
■ Setting Up Anynet+.............................................................33
■ Switching between Anynet+ Devices...................................33
■ Recording............................................................................34
■ Listening through a Receiver (Home theater).....................35
■ Troubleshooting for Anynet+...............................................35
Appendix
■ Troubleshooting...................................................................36
■ Installing the Stand..............................................................37
■ Disconnecting the Stand.....................................................37
■ Wall Mount Kit Specifications (VESA).................................38
■ Using the Anti-Theft Kensington Lock.................................38
■ Securing the TV to a Wall or Cabinet..................................39
■ Specifications......................................................................40
■ Dimensions..........................................................................41
❑ License
TruSurround HD, SRS and
Symbol are trademarks of SRS Labs, Inc.
TruSurround HD technology is incorporated under license from SRS Labs, Inc.
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks
of Dolby Laboratories.
❑ Symbol
N
O
T
Note
One-Touch Button
TOOL Button
English - BN68-01883B-00L02.indb 1
2009-02-27 �� 10:56:48
General Information
N Figures and illustrations in this User Manual are provided for reference only and may differ from actual product appearance.
Product design and specifications may be changed without notice in order to enhance product performance.
¦ List of Features
●
●
●
●
●
Adjustable picture settings that can be stored in the TV’s memory.
Automatic timer to turn the TV on and off.
A special sleep timer.
Excellent Digital Interface & Networking :
With a built-in HD digital tuner, non-subscription HD broadcasts can be viewed with no Cable Box/Satellite receiver (Set-Top
Box) needed.
● HDMI/DVI connection of your PC to this TV.
● Excellent Picture Quality
● SRS TruSurround HD provides a virtual surround system.
¦ Accessories
Remote Control
(BN59-00855A) &
Batteries (AAA x 2)
Power Cord (3903-000144)
TV-Holder & Screw (M4 X 16)
(BN96-10788A)
(Depending on the model)
Cover-Bottom
(LN40B540: BN63-05330A)
(LN46B540: BN63-05332A)
(LN52B540: BN63-05332A)
Screw (M4 X L16)
(6002-001294)
Owner’s Instructions
Warranty Card /
Safety Guide
Cleaning Cloth
(BN63-01798B)
N Please make sure the following items are included with your LCD TV. If any items are missing, contact your dealer.
N The items color and shape may vary depending on the model.
English - BN68-01883B-00L02.indb 2
2009-02-27 �� 10:56:48
¦ Viewing the Control Panel
N The product color and shape may vary depending on the model.
N You can use a button by pressing the side panel buttons.
1
2
3
4
5
8
76
1 SOURCEE: Toggles between all the available input sources. In the on-screen menu, use this button as you use the
ENTERE button on the remote control.
2 MENU: Press to see an on-screen menu of your TV’s features.
3 y: Press to increase or decrease the volume. In the on-screen menu, use the y buttons as you would use the
◄ and ► buttons on the remote control.
4 Z: Press to change channels. In the on-screen menu, use the Z buttons as you would use the ▼ and ▲ buttons
on the remote control.
5 P (POWER): Press to turn the TV on and off.
6 REMOTE CONTROL SENSOR: Aim the remote control towards this spot on the TV.
7 POWER INDICATOR: Blinks and turns off when the power is on and lights up in stand-by mode.
8 SPEAKERS
English - BN68-01883B-00L02.indb 3
2009-02-27 �� 10:56:48
¦ Viewing the Connection Panel
[TV Rear Panel]
1
2 3
4
5
6
[TV Side Panel]
1
7
!
0
9
8
N The product color and shape may vary depending on the model.
1 HDMI IN 1(DVI), 2, 3, 4 / DVI AUDIO IN [R-AUDIO-L]
– Connects to the HDMI jack of a device with an HDMI output.
N No sound connection is needed for an HDMI to HDMI connection.
N Use the HDMI IN 1 (DVI) jack for DVI connection to an external device. Use a DVI to HDMI cable or DVI-HDMI
adapter (DVI to HDMI) for video connection and the DVI AUDIO IN [R-AUDIO-L] jacks for audio.
N When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
N You can also use the ports to connect to a PC.
2 PC IN [PC] / [AUDIO]
– Connects to the video and audio output jacks on your PC.
3 DIGITAL AUDIO OUT (OPTICAL)
– Connects to a Digital Audio component such as a Home theater receiver.
4 EX-LINK
– Connector for service only.
5 AUDIO OUT
– Connects to the audio input jacks on your Amplifier/Home theater.
6 USB
– Connector for software upgrades and Media Play, etc.
7 AV IN 2
– Video and audio inputs for external devices, such as a camcorder or VCR.
8 ANT IN
– Connects to an antenna or cable TV system.
9 COMPONENT IN 1, 2 / AV IN 1
– Connects Component video / audio. The COMPONENT IN 1 jack is also used as the AV IN 1 jack.
N Connect the video cable to the COMPONENT IN 1 [Y/VIDEO] jack and the audio cable to the COMPONENT IN 1
[R-AUDIO-L] jacks.
0 KENSINGTON LOCK
– The Kensington Lock (optional) is a device used to physically fix the system when used in a public place. If you want to
use a locking device, contact the dealer where you purchased the TV.
N The location of the Kensington Lock may be different depending on its model.
! POWER INPUT
– Connects the supplied power cord.
English - BN68-01883B-00L02.indb 4
2009-02-27 �� 10:56:49
¦ Remote Control
N You can use the remote control up to a distance of about 23 feet from the TV.
N The performance of the remote control may be affected by bright light.
N The product color and shape may vary depending on the model.
1 POWER: Turns the TV on and
off.
2 NUMERIC BUTTONS: Press to
change the channel.
3 _: Press to select additional
channels (digital) being
broadcast by the same station.
For example, to select channel
‘54-3’, press ‘54’, then press _
and ‘3’.
4 MUTE M: Press to temporarily
cut off the sound.
5 y: Press to increase or
decrease the volume.
6 CH LIST: Used to display
Channel Lists on the screen.
7 TOOLS: Use to quickly select
frequently used functions.
8 INFO: Press to display
information on the TV screen.
9 COLOR BUTTONS: Use these
buttons in the Channel list menus
etc.
0 MEDIA.P: Allows you to play
music files, pictures, and movies.
! P.MODE: Press to select the
picture mode.
@ Use these buttons in the DMA
and Anynet+ modes. (∏: This
remote can be used to control
recording on Samsung recorders
with the Anynet+ feature)
# TV: Selects the TV mode directly
$ PRE-CH: Enables you to return
to the previous channel you were
watching.
% z : Press to change
channels.
^ SOURCE: Press to display
and select the available video
sources.
& FAV.CH: Press to switch to your
favorite channels.
* MENU: Displays the main onscreen menu.
( RETURN: Returns to the
previous menu.
) UP▲/DOWN▼/LEFT◄/
RIGHT►/ENTERE: Use to
select on-screen menu items and
change menu values.
a EXIT: Press to exit the menu.
b P.SIZE: Picture size selection.
c SRS: Selects SRS TruSurround
HD mode.
d CC: Controls the caption
decoder.
e MTS: Press to choose stereo,
mono or Separate Audio
Program (SAP broadcast).
1
#
2
3
4
$
5
%
6
7
^
&
*
(
)
8
a
9
0
!
b
c
d
e
@
¦ Installing Batteries in the Remote Control
1. Lift the cover at the back of the remote control upward as shown in the figure.
2. Install two AAA size batteries.
N Make sure to match the ‘+’ and ‘–’ ends of the batteries with the diagram inside the
compartment.
3. Replace the cover.
N Remove the batteries and store them in a cool, dry place if you won’t be using the
remote control for a long time. (Assuming typical TV usage, the batteries should last for
about one year.)
N If the remote control doesn’t work, check the following:
● Is the TV power on?
● Are the plus and minus ends of the batteries reversed?
● Are the batteries drained?
● Is there a power outage or is the power cord unplugged?
● Is there a special fluorescent light or neon sign nearby?
English - BN68-01883B-00L02.indb 5
2009-02-27 �� 10:56:49
Connections
¦ Connecting VHF and UHF Antennas
If your antenna has a set of leads that look like the diagram to the right, see ‘Antennas with 300
Ω Flat Twin Leads’ below.
If your antenna has one lead that looks like the diagram to the right, see ‘Antennas with 75 Ω
Round Leads’.
If you have two antennas, see ‘Separate VHF and UHF Antennas’.
Antennas with 300 Ω Flat Twin Leads
If you are using an off-air antenna (such as a roof antenna or ‘rabbit ears’) that has 300Ω twin
flat leads, follow the directions below.
1. Place the wires from the twin leads under the screws on a 300-75 Ω adapter (not
supplied). Use a screwdriver to tighten the screws.
ANT IN
2. Plug the adaptor into the ANT IN terminal on the back of the TV.
Antennas with 75 Ω Round Leads
Plug the antenna lead into the ANT IN terminal on the back of the TV.
ANT IN
Separate VHF and UHF Antennas
If you have two separate antennas for your TV (one VHF and one UHF), you must combine
the two antenna signals before connecting the antennas to the TV. This procedure requires an
optional combiner-adaptor (available at most electronics shops).
1. Connect both antenna leads to the combiner.
UHF
VHF
2. Plug the combiner into the ANT IN terminal on the bottom of the rear panel.
UHF
VHF
ANT IN
¦ Connecting Cable TV
To connect to a cable TV system, follow the instructions below.
ANT IN
Cable without a Cable Box
Plug the incoming cable into the ANT IN terminal on the back of the TV.
N Because this TV is cable-ready, you do not need a cable box to view unscrambled cable
channels.
Connecting to a Cable Box that Descrambles All Channels
1. Find the cable that is connected to the ANT OUT terminal on your cable box.
N This terminal might be labeled ‘ANT OUT’, ‘VHF OUT’ or simply, ‘OUT’.
2. Connect the other end of this cable to the ANT IN terminal on the back of the TV.
ANT IN
ANT OUT
ANT IN
English - BN68-01883B-00L02.indb 6
2009-02-27 �� 10:56:50
Connecting to a Cable Box that Descrambles Some Channels
If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a twoway splitter, an RF (A/B) switch and four lengths of RF cable. (These items are available at most electronics stores.)
ANT IN
Incoming cable
TV Rear
Splitter
RF (A/B) Switch
Cable Box
1. Find and disconnect the cable that is connected to the ANT IN terminal on your cable box.
N This terminal might be labeled ‘ANT IN’, ‘VHF IN’ or simply, ‘IN’.
2. Connect this cable to a two-way splitter.
3. Connect an RF cable between the OUTPUT terminal on the splitter and the IN terminal on the cable box.
4. Connect an RF cable between the ANT OUT terminal on the cable box and the B–IN terminal on the RF(A/B) switch.
5. Connect another cable between the other OUT terminal on the splitter and the A–IN terminal on the RF (A/B) switch.
6. Connect the last RF cable between the OUT terminal on the RF (A/B) switch and the ANT IN terminal on the rear of the TV.
After you have made this connection, set the A/B switch to the ‘A’ position for normal viewing. Set the A/B switch to the ‘B’
position to view scrambled channels. (When you set the A/B switch to ‘B’, you will need to tune your TV to the cable box’s
output channel, which is usually channel 3 or 4.)
¦ Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via HDMI
This connection can only be made if there is an HDMI Output connector on the external device.
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
TV Rear Panel
TV Side Panel
TV Rear Panel
1 HDMI Cable (Not supplied)
or
or
1. Connect an HDMI Cable between the HDMI IN 1 (DVI), 2, 3 or 4 jack on the TV and the HDMI jack on the DVD / Blu-ray
Player or Cable Box / Satellite receiver (Set-Top Box).
N What is HDMI?
● HDMI(High-Definition Multimedia Interface), is an interface that enables the transmission of digital audio and video signals
using a single cable.
● The difference between HDMI and DVI is that the HDMI device is smaller in size and has the HDCP (High Bandwidth Digital
Copy Protection) coding feature installed.
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N The TV may not output sound and pictures may be displayed with abnormal color when DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box) supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI
cable and there is no sound, connect the HDMI cable to the HDMI IN 1 (DVI) jack and the audio cables to the DVI AUDIO
IN [R-AUDIO-L] jacks on the back of the TV. If this happens, contact the company that provided the DVD / Blu-ray player /
Cable Box / Satellite receiver (Set-Top Box) to confirm the HDMI version, then request an upgrade.
N HDMI cables that are not 1.3 may cause annoying flicker or no screen display.
English - BN68-01883B-00L02.indb 7
2009-02-27 �� 10:56:50
¦ Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via DVI
This connection can only be made if there is a DVI Output connector on the external device.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
2 Audio Cable (Not supplied)
1 DVI to HDMI Cable (Not supplied)
1. Connect a DVI to HDMI Cable or DVI-HDMI Adapter between the HDMI IN 1 (DVI) jack on the TV and the DVI jack on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box).
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
N When using an HDMI / DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
¦ Connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) to
your TV.
TV Rear Panel
DVD / Blu-ray player / Cable Box /
Satellite receiver (Set-Top Box)
2 Audio Cable (Not supplied)
1 Component Cable (Not supplied)
1. Connect a Component Cable between the COMPONENT IN (1 or 2) [Y, PB, PR] jacks on the TV and the COMPONENT [Y, PB,
PR] jacks on the DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
2. Connect Audio Cables between the COMPONENT IN(1 or 2) [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the
DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box).
N Component video separates the video into Y (Luminance (brightness)), Pb (Blue) and Pr (Red) for enhanced video quality.
Be sure to match the component video and audio connections. For example, if connecting a Component video cable to
COMPONENT IN 1, connect the audio cable to COMPONENT IN 1 also.
N Each DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.
N When connecting a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box), match the color of the connection
terminal to the cable.
English - BN68-01883B-00L02.indb 8
2009-02-27 �� 10:56:51
¦ Connecting a VCR
TV Rear Panel
TV Side Panel
VCR Rear Panel
2 Audio Cable (Not supplied)
1 Video Cable (Not supplied)
1. Connect a Video Cable between the AV IN 1 [Y/VIDEO] or AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the
VCR.
2. Connect Audio Cables between the AV IN (1 or 2) jacks on the TV and the AUDIO OUT jacks on the VCR.
N If you have a ‘mono’ (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks
of the TV. Alternatively, connect the cable to the ‘R’ jack. If your VCR is stereo, you must connect two cables.
N Each VCR has a different back panel configuration.
N When connecting a VCR, match the color of the connection terminal to the cable.
N When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable
(Yellow).
¦ Connecting a Digital Audio System
The rear panel jacks on your TV make it easy to connect a Digital Audio System (Home theater/Receiver) to your TV.
TV Rear Panel
Digital Audio System
1 Optical Cable (Not supplied)
1. Connect an Optical Cable between the DIGITAL AUDIO OUT (OPTICAL) jacks on the TV and the Digital Audio Input jacks on
the Digital Audio System.
N When a Digital Audio System is connected to the DIGITAL AUDIO OUT (OPTICAL) jack: Decrease the volume of the TV
and adjust the volume level with the system’s volume control.
N 5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.
N Each Digital Audio System has a different back panel configuration.
N When the Home Theater receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is
displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a
digital component such as a DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) and is connected to the
TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver. If you want to hear 5.1 channel audio,
connect the digital audio out jack on DVD / Blu-ray player / Cable Box / Satellite receiver (Set-Top Box) directly to an
Amplifier or Home Theater, not the TV.
English - BN68-01883B-00L02.indb 9
2009-02-27 �� 10:56:51
¦ Connecting an Amplifier / DVD Home Theater
TV Rear Panel
Amplifier/DVD Home Theater
1 Audio Cable (Not supplied)
1. Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and Audio Input jacks on the Amplifier / DVD
Home Theater.
N When an audio amplifier is connected to the AUDIO OUT [R-AUDIO-L] jacks: Decrease the volume of the TV and adjust
the volume level with the Amplifier’s volume control.
N Each Amplifier/DVD Home Theater has a different back panel configuration.
N When connecting an Amplifier/DVD Home Theater, match the color of the connection terminal to the cable.
English - 10
BN68-01883B-00L02.indb 10
2009-02-27 �� 10:56:52
¦ Connecting a Camcorder
The side panel jacks on your TV make it easy to connect a camcorder to your TV.
Using a Video Cable
TV Side Panel
1 Video Cable (Not supplied)
2 Audio Cable (Not supplied)
Camcorder
1. Connect a Video Cable between the AV IN 2 [VIDEO] jack on the TV and the VIDEO OUT jack on the camcorder.
2. Connect Audio Cables between the AV IN 2 [R-AUDIO-L] jacks on the TV and the AUDIO OUT jacks on the camcorder.
N Each Camcorder has a different back panel configuration.
N When connecting a Camcorder, match the color of the connection terminal to the cable.
Using an HDMI Cable
TV Side Panel
1 HDMI Cable (Not supplied)
HD Camcorder
1. Connect an HDMI Cable between the HDMI 4 jack on the TV and the HDMI OUT jack on the camcorder.
English - 11
BN68-01883B-00L02.indb 11
2009-02-27 �� 10:56:52
¦ Connecting a PC
Using a D-Sub Cable
TV Rear Panel
PC
1 D-Sub Cable (Not supplied)
2 PC Audio Cable (Not supplied)
1. Connect a D-Sub Cable between PC IN [PC] connector on the TV and the PC output connector on your computer.
2. Connect a PC Audio Cable between the PC IN [AUDIO] jack on the TV and the Audio Out jack of the sound card on your
computer.
N When connecting a PC, match the color of the connection terminal to the cable.
Using an HDMI/DVI Cable
TV Rear Panel
PC
2 3.5 mm Stereo mini-plug/2RCA Cable (Not supplied)
1 HDMI/DVI Cable (Not supplied)
1. Connect an HDMI/DVI cable between the HDMI IN 1 (DVI) jack on the TV and the PC output jack on your computer.
2. Connect a 3.5 mm Stereo miniplug / 2RCA Cable between the DVI AUDIO IN [R-AUDIO-L] jack on the TV and the Audio Out
jack of the sound card on your computer.
N When using an HDMI/DVI cable connection, you must use the HDMI IN 1 (DVI) terminal.
Using an HDMI Cable
TV Rear Panel
TV Side Panel
PC
1 HDMI Cable (Not supplied)
or
or
1. Connect an HDMI cable between the HDMI IN 1 (DVI), 2, 3 or 4 jack on the TV and the PC output jack on your computer.
N Each PC has a different back panel configuration.
English - 12
BN68-01883B-00L02.indb 12
2009-02-27 �� 10:56:53
Operation
¦ Viewing the menus
Button
MENU
RETURN R
EXIT e
Operations
Display the main on-screen menu.
Return to the previous menu.
Exit the on-screen menu.
Button
▲/▼/◄/►/
ENTERE
Picture
Before using the TV, follow the steps below to learn how to navigate the menu in order to select
and adjust different functions.
1. Press the MENU button.
The main menu is displayed on the screen. Its left side has the following icons: Picture,
Sound, Channel , Setup, Input, Application, Support.
2. Press the ▲ or ▼ button to select one of the icons.
Press the ◄ or ► button to access the icon’s sub-menu.
3. Press the ▲ or ▼ button to move to items in the menu.
Press the ENTERE button to enter items in the menu.
4. Press the ▲/▼/◄/► button to change the selected items.
N Press the RETURN button to return to the previous menu.
5. Press the EXIT button to exit from the menu.
Using the remote control buttons
Mode
: Standard
Backlight
:8
Contrast
: 95
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Operations
Move the cursor and select an item.
Select the currently selected item.
Confirm the setting.
Example: Setting the TV’s Brightness in the Picture Menu
 Adjusting the Brightness to 80
Picture
1. Press the MENU button to display the menu.
Picture
2. Press the ENTERE button to select Picture.
Picture
3. Press the ▲ or ▼ button to select Brightness.
Mode
: Standard
Backlight
:8
Contrast
: 95
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Mode : Standard ►
Backlight
:8
Contrast
: 95
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
Backlight
:8
Contrast
: 95
Brightness : 45 Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
►
Advanced Settings
Picture Option
Picture Reset
4. Press the ENTERE button.
Brightness
U Move
5. Press the ◄ or ► button until the Brightness changes to 80.
6. Press the ENTERE button.
N Press the EXIT button to exit from the menu.
L Adjust
45
E Enter
Brightness
U Move
L Adjust
R Return
80
E Enter
R Return
English - 13
BN68-01883B-00L02.indb 13
2009-02-27 �� 10:56:54
¦ Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently.
Plug & Play
Select Language of the OSD.
1. Press the POWER P button on the remote control.
N You can also use the POWER P button on the TV.
Menu Language
: English ►
N The message Select Language of the OSD. is displayed.
E Enter
2. Press the ▲ or ▼ button to select the language, then press the ENTERE button. The
message Select ‘Home Use’ when installing this TV in your home. is displayed.
3. Press the ◄ or ► button to select Store Demo or Home Use, then press the ENTERE button. The message Select the
Antenna source to memorize. is displayed.
N We recommend setting the TV to Home Use mode for the best picture in your home environment.
N Store Demo mode is only intended for use in retail environments. If the unit is accidentally set to Store Demo mode and
you want to return to Home Use (Standard): Press the volume button on the TV. When the volume OSD is displayed,
press and hold the MENU button on the TV for 5 seconds.
4. Press the ▲ or ▼ button to memorize the channels of the selected connection. Press the ENTERE button to select Start.
N Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna signals.
N In Cable mode, you can select the correct signal source among STD, HRC, and IRC by pressing the ▲, ▼, ◄ or ►
button, then press the ENTERE button. If you have Digital cable, select the cable system signal source for both Analog
and Digital. Contact your local cable company to identify the type of cable system that exists in your particular area.
5. Press the ENTERE button to select Start. The TV will begin memorizing all of the available channels.
N To stop the search before it has finished, press the ENTERE button with Stop selected.
N After all the available channels are stored, it starts to remove scrambled channels. The Auto program menu then
reappears. Press the ENTERE button when channel memorization is complete. The message Set the Clock Mode. is
displayed.
6. Press the ENTERE button.
Press the ▲ or ▼ button to select Auto, then Press the ENTERE button. The message Set to daylight saving time. is
displayed. If you select Manual, Set current date and time is displayed.
7. Press the ▲ or ▼ button to select Off, On or Auto, then press the ENTERE button.
8. Press the ▲ or ▼ button to highlight the time zone for your local area. Press the ENTERE button. If you have received a
digital signal, the time will be set automatically. If not, see page 22 to set the clock.
9. The connection method to provide the best quality HD is offered. After confirming the method, press the ENTERE button.
10.The message Enjoy your watching. is displayed. When you have finished, press the ENTERE button.
If you want to reset this feature...
1. Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup, then press the ENTERE button.
2. Press the ENTERE button again to select Plug & Play.
N The Plug & Play feature is only available in the TV mode.
English - 14
BN68-01883B-00L02.indb 14
2009-02-27 �� 10:56:54
Channel Control
¦ Configuring the Channel Menu
❑ Antenna → Air / Cable
Channel
Before your television can begin memorizing the available channels, you must specify the type
of signal source that is connected to the TV (i.e. an Air or a Cable system).
T Press the TOOLS button to display the Tools menu. You can also set the Antenna by
selecting Tools → Switch to Cable (or Switch to Air).
Antenna
: Air ►
Auto Program
Clear Scrambled Channel
Channel List
❑ Auto Program
Fine Tune
 Air: Air antenna signal. / Cable: Cable antenna signal. / Auto: Air and Cable antenna
signals
N When selecting the Cable TV system: Selects the cable system. STD, HRC and IRC
identify various types of cable TV systems. Contact your local cable company to identify the type of cable system that exists in
your particular area. At this point the signal source has been selected.
N After all the available channels are stored, it starts to remove scrambled channels (Clear Scrambled Channels). The Auto
program menu then reappears.
N If you want to stop Auto Programming, press the ENTERE button. The Stop Auto Program? message will be displayed.
Select Yes by pressing the ◄ or ► button, then press the ENTERE button.
❑ Clear Scrambled Channels (digital channels only)
This function is used to filter out scrambled channels after Auto Program is completed. This process may take up to 20~30
minutes.
N To stop searching scrambled channels: Press the ENTERE button to select Stop. Press the ◄ button to select Yes, then
press the ENTERE button.
N This function is only available in Cable mode.
❑ Channel List
For detailed procedures on using the Channel List, refer to the ‘Managing Channels’ instructions.
O You can select these options by simply pressing the CH LIST button on the remote control.
❑ Fine Tune (analog channels only)
Use fine tuning to manually adjust a particular channel for optimal reception.
N If you do not store the fine-tuned channel in memory, adjustments are not saved.
N * will appear next to the name of fine-tuned channels.
N To reset the fine tuning setting, press the ▼ button to select Reset, then press the ENTERE button.
¦ Managing Channels
 All Channels
Shows all currently available channels.
Added Channels
Using this menu, you can add / delete or set favorite channels and use the program guide for
digital broadcasts.
2
Air
4
Air
4-2 ♥ TV #8
 Added Channels
8
Air
13
Air
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Shows all added channels.
 Favorite
Air
Shows all favorite channels.
O To select the favorite channels you have set up, press the FAV.CH button on the remote control.
Zoom
Select
T Tools
English - 15
BN68-01883B-00L02.indb 15
2009-02-27 �� 10:56:54
 Programmed
Shows all current reserved Programs.
N Select a channel in the All Channels, Added Channels or Favorite screen by pressing the ▲ / ▼ buttons, and pressing the
ENTERE button. Then you can watch the selected channel.
N Using the Color buttons with the Channel List
– Green (Zoom): Enlarges or shrinks a channel number.
– Yellow (Select): Selects multiple channel lists. You can perform the add / delete or add to Favorite / delete from Favorite
function for multiple channels at the same time. Select the required channels and press the yellow button to set all the
selected channels at the same time. The c mark appears to the left of the selected channels.
– TOOLS (Tools): Displays the Add (or Delete), Add to Favorite (or Delete from Favorite), Timer Viewing, Channel
Name Edit, Select All (or Deselect All) and Auto Program menus (The Options menus may differ depending on the
situation.)
N Channel Status Display Icons
– ♥ : A channel set as a Favorite.
– c: A channel selected by pressing the yellow button.
– ( : A Program currently being broadcast.
– ) : A reserved program
Channel List Option Menu (in All Channels / Added Channels / Favorite)
N Press the TOOLS button to use the option menu.
N Option menu items may differ depending on the channel status.
 Add / Delete
All Channels
You can delete or add a channel to display the channels you want.
N All deleted channels will be shown on All Channels menu.
N A gray-colored channel indicates the channel has been deleted.
N The Add menu only appears for deleted channels.
N You can also delete a channel from the Added Channels or Favorite menu in the same
manner.
 Add to Favorite / Delete from Favorite
You can set channels you watch frequently as Favorite.
T Press the TOOLS button to display the Tools menu. You can also set the add to (or delete
from) Favorites by selecting Tools → Add to Favorite (or Delete from Favorite).
N The ♥ symbol will be displayed and the channel will be set as a favorite.
N All favorite channels will be shown in the Favorite menu.
2
Air
4
Air
4-2 ♥ TV #8
8
Air
13
Air
Delete
Add to Favorite
Timer Viewing
Channel Name Edit
Select All
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Auto Program
Air
Zoom
Select
T Tools
 Timer Viewing
If you reserve a program you want to watch, the channel is automatically switched to the reserved channel in the Channel List;
even when you are watching another channel. To reserve a program, set the current time first. (See page 22.)
N Only memorized channels can be reserved.
N You can set the channel, month, day, year, hour and minute directly by pressing the number buttons on the remote control.
N Reserving a program will be shown in the Programmed menu.
N Digital Program Guide and Viewing Reservation
When a digital channel is selected, and you press the ► button, the Program Guide for the channel appears. You can reserve
a program according to the procedures described above.
 Channel Name Edit (analog channels only)
Channels can labeled so that their call letters appear whenever the channel is selected.
N The names of digital broadcasting channels are automatically assigned and cannot be labeled.
 Select All / Deselect All
● Select All: You can select all the channels in the channel list.
● Deselect All: You can deselect all the selected channels.
N You can only select Deselect All when there is a selected channel.
 Auto Program
N For further details on setting up options, refer to page 15.
English - 16
BN68-01883B-00L02.indb 16
2009-02-27 �� 10:56:54
Channel List Option Menu (in Programmed)
1 / 1 / 2009
Programmed
You can view, modify or delete a reservation.
N Press the TOOLS button to use the option menu.
 Change Info
Select to change a viewing reservation.
9:08 am5
Info
TV3Change
The
3:15 pm
2
TV3
5:50 pm
2
TV3
Zoom
Select
Cancel Schedules
The Equalizer
Information
McMillan & Wife
Select All
 Cancel Schedules
Select to cancel a viewing reservation.
Air
 Information
T Tools E Information
Select to view a viewing reservation. (You can also change the reservation information.)
 Select All
Select all reserved Programs.
Picture Control
¦ Configuring the Picture Menu
❑ Mode
Picture
You can select the type of picture which best corresponds to your viewing requirements.
O Press the P.MODE button on the remote control repeatedly to select the desired picture
mode.
 Dynamic
Selects the picture for increased definition in a bright room.
 Standard
Selects the picture for the optimum display in a normal environment.
Mode : Standard Backlight
:8
Contrast
: 95
Brightness
: 45
Sharpness
: 50
Color
: 50
Tint (G/R)
: G50/R50
►
 Movie
Selects the picture for viewing movies in a dark room.
❑ Backlight / Contrast / Brightness / Sharpness / Color / Tint (G/R)
Your television has several setting options that allow you to control the picture quality.
● Backlight: Adjusts the brightness of LCD back light.
● Contrast: Adjusts the contrast level of the picture.
● Brightness: Adjusts the brightness level of the picture
● Sharpness: Adjusts the edge definition of the picture.
● Color: Adjusts color saturation of the picture.
● Tint (G/R): Adjusts the color tint of the picture.
N When you make changes to Backlight, Contrast, Brightness, Sharpness, Color or Tint (G/R) the OSD will be adjusted
accordingly.
N In PC mode, you can only make changes to Backlight, Contrast and Brightness.
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
N The energy consumed during use can be significantly reduced if the brightness level of the picture is lowered, which will
reduce the overall running cost.
❑ Advanced Settings
Samsung’s new TVs allow you to make even more precise picture settings than previous
models.
N Advanced Settings is available in Standard or Movie mode.
N In PC mode, you can only make changes to Gamma and White Balance from among the
Advanced Settings items.
 Black Tone → Off / Dark / Darker / Darkest
You can select the black level on the screen to adjust the screen depth.
Advanced Settings
Black Tone
: Off
Dynamic Contrast
: Medium
Gamma
:0
Color Space
: Native
►
White balance
Flesh Tone
:0
Edge Enhancement
: On
U Move
E Enter
R Return
English - 17
BN68-01883B-00L02.indb 17
2009-02-27 �� 10:56:55
 Dynamic Contrast → Off / Low / Medium / High
You can adjust the screen contrast so that the optimal contrast is provided.
 Gamma
You can adjust the primary color (red, green, blue) Intensity. (-3 ~ +3)
 Color Space
Color space is a color matrix composed of red, green and blue colors. Select your favorite color space to experience the most
natural color.
● Native: Native Color Space offers deep and rich color tone.
● Auto: Auto Color Space automatically adjusts to the most natural color tone based on program sources.
 White Balance
You can adjust the color temperature for more natural picture colors.
● R-Offset / G-Offset / B-Offset / R-Gain / G-Gain / B-Gain: You can adjust the Color ‘temperature’ in the light areas by
changing the values of R, G, B. Recommended for advanced users only.
● Reset: The previously adjusted white balance will be reset to the factory defaults.
N Changing the adjustment value will refresh the adjusted screen.
 Flesh Tone
You can emphasize the pink ‘flesh tone’ in the picture.
N Changing the adjustment value will refresh the adjusted screen.
 Edge Enhancement → Off / On
You can emphasize object boundaries in the picture.
❑ Picture Options
N In PC mode, you can only make changes to the Color Tone and Size from among the
items in Picture Options.
 Color Tone → Cool / Normal / Warm1 / Warm2
N Warm1 or Warm2 is only activated when the picture mode is Movie.
N Settings can be adjusted and stored for each external device you have connected to an
input of the TV.
 Size
Picture Options
Color Tone
: Normal
Size
: 16:9
Digital NR
: Auto
HDMI Black Level
: Normal
Film Mode
: Off
U Move
E Enter
►
R Return
Occasionally, you may want to change the size of the image on your screen. Your TV comes
with six screen size options, each designed to work best with specific types of video input. Your
cable box/satellite receiver may have its own set of screen sizes as well. In general, though, you should view the TV in 16:9 mode
as much as possible.
O Alternately, you can press the P.SIZE button on the remote control repeatedly to change the picture size.
● 16:9 : Sets the picture to 16:9 wide mode.
● Zoom1: Magnifies the size of the picture on the screen.
● Zoom2: Magnifies the size of the picture more than Zoom1.
● Wide Fit: Enlarges the aspect ratio of the picture to fit the entire screen.
● 4:3 : Sets the picture to 4:3 normal mode.
● Screen Fit: Use the function to see the full image without any cutoff when HDMI (720p/1080i/1080p), Component
(1080i/1080p) or DTV (1080i) signals are input.
16:9
Zoom1 U Move
Zoom2 U Move
16:9
Zoom1
Zoom2
Wide Fit U Move
4:3
Screen Fit
Wide Fit
4:3
Screen Fit
English - 18
BN68-01883B-00L02.indb 18
2009-02-27 �� 10:56:55
N Temporary image retention may occur when viewing a static image on the set for more than two hours.
N After selecting Zoom1, Zoom2 or Wide Fit: Press the ◄ or ► button to select Position, then press the ENTERE button.
Press the ▲ or ▼ button to move the picture up and down.
N After selecting Screen Fit in HDMI (1080i/1080p) or Component (1080i/1080p) mode, you made need to center the picture:
Press the ◄ or ► button to select Position, then press the ENTERE button. Press the ▲, ▼, ◄ or ► button to move the
picture.
Reset: Press the ◄ or ►button to select Reset, then press the ENTERE button. You can initialize the setting.
N HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)
N Settings can be adjusted and stored for each external device you have connected to an input of the TV.
Input Source
Picture Size
TV , AV, Component (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Component (1080i, 1080p), HDMI (720p, 1080i, 1080P)
16:9, 4:3, Wide Fit, Screen Fit
PC
16:9, 4:3
 Digital NR → Off / Low / Medium / High / Auto
If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static
and ghosting that may appear on the screen.
N When the signal is weak, select one of the other options until the best picture is displayed.
 HDMI Black Level → Normal / Low
You can select the black level on the screen to adjust the screen depth.
N This function is active only when an external device is connected to the TV via HDMI. The HDMI Black Level function may not
be compatible with all external devices.
 Film Mode → Off / Auto
The TV can be set to automatically sense and process film signals from all sources and adjust the picture for optimum quality.
N Film Mode is supported in TV, Video, Component (480i / 1080i) and HDMI (480i / 1080i).
❑ Picture Reset → Reset Picture Mode / Cancel
Resets all picture settings to the default values.
N Reset Picture Mode: Current picture values return to default settings.
¦ Using Your TV as a Computer (PC) Display
Setting Up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer are shown below. The actual screens on your PC will probably be different,
depending upon your particular version of Windows and your particular video card. However, even if your actual screens look
different, the same basic set-up information will apply in almost all cases. (If not, contact your computer manufacturer or Samsung
Dealer.)
1. First, click on ‘Control Panel’ in the Windows start menu.
2. When the control panel window appears, click on ‘Appearance and Themes’ and a display dialog-box will appear.
3. When the control panel window appears, click on ‘Display’ and a display dialog-box will appear.
4. Navigate to the ‘Settings’ tab on the display dialog-box.
The correct size setting (resolution): Optimum: 1920 X 1080 pixels
If a vertical frequency option exists on your display settings dialog box, the correct value is 60 or 60 Hz. Otherwise, just click
OK and exit the dialog box.
English - 19
BN68-01883B-00L02.indb 19
2009-02-27 �� 10:56:55
Display Modes
If the signal from the system equals the standard signal mode, the screen is adjusted automatically. If the signal from the system
doesn’t equal the standard signal mode, adjust the mode by referring to your videocard user guide; otherwise there may be no
video. For the display modes listed below, the screen image has been optimized during manufacturing.
 D-Sub and HDMI/DVI Input
Mode
Resolution
IBM
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV
CEA
1920 x 1080p
67.500
Pixel Clock Frequency
(MHz)
25.175
28.322
30.240
57.284
100.000
32.750
81.750
74.500
130.000
95.750
25.175
31.500
31.500
40.000
50.000
49.500
65.000
75.000
78.750
108.000
108.000
135.000
83.500
106.500
108.000
85.500
106.500
136.750
146.250
89.040
128.943
Sync Polarity
(H / V)
+/-/+
-/-/-/-/+
-/+
-/+
-/+
-/+
-/-/-/+/+
+/+
+/+
-/-/+/+
+/+
+/+
+/+
-/+
-/+
+/+
+/+
-/+
-/+
-/+
-/+
-/-
148.500
+/+
60.000
N When using an HDMI / DVI cable connection, you must use the HDMI IN 1 (DVI) jack.
¦ Setting up the TV with your PC
N Preset: Press the SOURCE button to select PC mode.
❑ Auto Adjustment
Picture
Use the Auto Adjust function to have the TV set automatically adjust the video signals it
receives. The function also automatically fine-tunes the settings and adjusts the frequency
values and positions.
T Press the TOOLS button to display the Tools menu. You can also set the Auto Adjustment
by selecting Tools → Auto Adjustment.
N This function does not work in DVI-HDMI mode.
Brightness
: 45
Sharpness
: 50
Auto Adjustment ►
Screen
Advanced Settings
Picture Options
Picture Reset
❑ Screen
The purpose of the picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by fine tuning alone,
then make the vertical frequency adjustments on your PC and fine tune again. After the noise has been reduced, re-adjust the
picture so that it is aligned on the center of the screen.
 Coarse / Fine
The purpose of picture quality adjustment is to remove or reduce picture noise. If the noise is not removed by Fine-tuning alone,
then adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, readjust the picture
so that it is aligned on the center of screen.
 PC Position
Adjust the PC’s screen positioning if it does not fit the TV screen. Press the ▲ or ▼ button to adjusting the Vertical-Position. Press
the ◄ or ► button to adjust the Horizontal-Position.
 Image Reset
You can replace all image settings with the factory default values.
English - 20
BN68-01883B-00L02.indb 20
2009-02-27 �� 10:56:55
Sound Control
¦ Configuring the Sound Menu
❑ Mode → Standard / Music / Movie / Clear Voice / Custom
Sound
You can select a sound mode to suit your personal preferences.
T Press the TOOLS button to display the Tools menu. You can also configure the sound
mode by selecting Tools → Sound Mode.
Mode : Custom
►
Equalizer
SRS TruSurround HD : Off
❑ Equalizer
The sound settings can be adjusted to suit your personal preference.
 Mode
Selects the sound mode among the predefined settings.
Preferred Language : English
Multi-Track Sound
: Mono
Auto Volume
: Off
Speaker Select
: TV Speaker
 Balance L/R
Adjusts the balance between the right and left speaker.
 100Hz / 300Hz / 1KHz / 3KHz / 10KHz (Bandwidth Adjustment)
To adjust the level of different bandwidth frequencies.
 Reset
Resets the equalizer settings to the default values.
❑ SRS TruSurround HD → Off / On
SRS TruSurround HD is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with all multichannel formats.
O Press the SRS button on the remote control to select On or Off.
❑ Preferred Language (digital channels only)
Digital-TV broadcasts are capable of simultaneous transmission of many audio tracks (for example, simultaneous translations of
the program into foreign languages).
O You can listen in a language other than the Preferred Language by pressing the MTS button on the remote control.
N Preferred Language is available only in Digital TV mode.
N You can only select the language from among the actual languages being broadcast.
❑ Multi-Track Sound (MTS) (analog channels only)
O
●
●
●
N
N
Press the MTS button on the remote control repeatedly to select Mono, Stereo or SAP.
Mono: Choose for channels that are broadcasting in mono or if you are having difficulty receiving a stereo signal.
Stereo: Choose for channels that are broadcasting in stereo.
SAP: Choose to listen to the Separate Audio Program, which is usually a foreign-language translation.
Multi-Track Sound is available only in Analog TV mode.
Depending on the particular program being broadcast, you can listen to Mono, Stereo or SAP.
❑ Auto Volume → Off / On
Each broadcasting station has its own signal conditions, and so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
English - 21
BN68-01883B-00L02.indb 21
2009-02-27 �� 10:56:56
❑ Speaker Select
When you watch TV with it connecting to a Home theater, turn the TV speakers off so you can listen to sound from the Home
theater’s (external) speakers.
 External Speaker
Used to listen to the sound of the External (Home Theater) Speakers.
 TV Speaker
Used to listen to the sound of the TV Speakers.
N If you select External Speaker in the Speaker Select menu, the sound settings will be limited.
N The volume and MUTE buttons do not operate when the Speaker Select is set to External Speaker. Please set the volume
on your Home theater.
TV Speaker
External Speaker
Video No Signal
TV's Internal Speakers
RF, AV, Component, PC, HDMI
Sound Output
Mute
Mute
Audio Out (Optical, L/R Out) to Sound System
RF, AV, Component, PC, HDMI
Sound Output
Sound Output
Mute
❑ Sound Reset → Reset All / Reset Sound Mode / Cancel
You can restore the Sound settings to the factory defaults.
N Reset Sound Mode: Current sound values return to default settings.
Setup
¦ Configuring the Setup Menu
❑ Language
Setup
You can set the menu language.
Plug & Play
Language ❑ Time
Time
 Clock
Caption
: English
►
V-Chip
Melody
: Medium
Setting the clock is necessary in order to use the various timer features of the TV.
Game Mode
: Off
O The current time will appear every time you press the INFO button.
Energy Saving
: Off
N If you disconnect the power cord, you have to set the clock again.
● Clock Mode
You can set up the current time manually or automatically.
– Auto: Set the current time automatically using the time from a digital broadcast.
– Manual: Set the current time to a manually specified time.
N Depending on the broadcast station and signal, the auto time may not be set correctly. If this occurs, set the time
manually.
N The Antenna or cable must be connected in order to set the time automatically.
● Clock Set
You can set the current time manually.
N This function is only available when Clock Mode is set to Manual.
N You can set the month, day, year, hour, and minute directly by pressing the number buttons on the remote control.
● Time Zone
Select your time zone.
N This function is only available when Clock Mode is set to Auto.
● DST (Daylight Saving Time) → Off / On / Auto
Switches the Daylight Saving Time function on or off.
N This function is only available when Clock Mode is set to Auto.
 Sleep Timer
The sleep timer automatically shuts off the TV after a preset time (30, 60, 90, 120, 150 and 180 minutes).
T Press the TOOLS button to display the Tools menu. You can also set the sleep timer by selecting Tools → Sleep Timer.
N To cancel the Sleep Timer function, select Off.
English - 22
BN68-01883B-00L02.indb 22
2009-02-27 �� 10:56:56
 Timer 1 / Timer 2 / Timer 3
Three different on / off timer settings can be made. You must set the clock first.
● On Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to
Activate.)
● Off Time: Set the hour, minute, am/pm, and activate/inactivate. (To activate the timer with the setting you’ve chosen, set to
Activate.)
● Volume: Set the desired volume level.
● Source: When the On Time is active, you can turn on a specific channel or play back contents such as photo or audio files.
N If the folder name to be configured by the contents function is too long, it cannot be selected.
● Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
N When Manual is selected, press the ►button to select the desired day of the week. Press the ENTERE button over the
desired day and the c mark will appear.
N You can set the hour, minute and channel by pressing the number buttons on the remote control.
N Auto Power Off
When you set the timer On, the television will eventually turn off, if no controls are operated for 3 hours after the TV was
turned on by the timer. This function is only available in timer On mode and prevents overheating, which may occur if a TV is
on for too long time.
❑ V-Chip
The V-Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN
(personal ID number) before any of the V-Chip restrictions are set up or changed.
N V-Chip function is not available in HDMI, Component or PC mode.
N The default PIN number of a new TV set is ‘0-0-0-0’
N If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER
(off) → MUTE → 8 → 2 → 4 → POWER (on).
N Allow all: Press to unlock all TV ratings. / Block all: Press to lock all TV ratings.
 V-Chip Lock → Off / On
You can block rated TV Programs.
 TV Parental Guidelines
You can block TV programs depending on their rating. This function allows you to control what
TV Parental Guidelines
your children are watching.
ALL FV V S L D
Allow All
● TV-Y: Young children / TV-Y7: Children 7 and over / TV-G: General audience /
TV-Y
Block All
TV-Y7
TV-PG: Parental guidance / TV-14: Viewers 14 and over / TV-MA: Mature audience
TV-G
● ALL: Lock all TV ratings. / FV: Fantasy violence / V: Violence / S: Sexual situation /
TV-PG
L: Adult Language / D: Sexually Suggestive Dialog
TV-14
N The V-Chip will automatically block certain categories that are more restrictive. For
TV-MA
example, if you block TV-Y category, then TV-Y7 will automatically be blocked. Similarly,
n Move E Enter R Return
if you block the TV-G category, then all the categories in the young adult group will be
blocked (TV-G, TV-PG, TV-14 and TV-MA). The sub-ratings (D, L, S, V) work together
similarly.
N The V-chip will automatically block certain categories that are ‘More restrictive’. For example, if you block L sub-rating in TVPG, then the L sub-ratings in TV-14 and TV-MA will automatically be blocked.
 MPAA Rating
You can block movies depending on their MPAA rating. The Motion Picture Association of
MPAA Rating
America(MPAA) has implemented a rating system that provides parents or guardians with
G
advance information on which films are appropriate for children.
PG
Allow All
● G: General audience (no restrictions).
PG-13
Block All
R
● PG: Parental guidance suggested.
NC-17
● PG-13: Parents strongly cautioned.
X
● R: Restricted. Children under 17 should be accompanied by an adult.
NR
● NC-17: No children under age 17.
n Move E Enter R Return
● X: Adults only.
● NR: Not rated.
N The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block the PG-13 category, then
R, NC-17 and X will automatically be blocked also.
English - 23
BN68-01883B-00L02.indb 23
2009-02-27 �� 10:56:56
 Canadian English
●
●
●
●
●
●
N
C: Programming intended for children under age 8.
C8+: Programming generally considered acceptable for children 8 years and over to watch on their own.
G: General programming, suitable for all audiences.
PG: Parental Guidance.
14+: Programming contains themes or content which may not be suitable for viewers under the age of 14.
18+: Adult programming.
The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block G category, then PG, 14+
and 18+ will automatically be blocked also.
 Canadian French
●
●
●
●
●
N
G: General
8 ans+: Programming generally considered acceptable for children 8 years and over to watch on their own.
13 ans+: Programming may not be suitable for children under the age of 13.
16 ans+: Programming is not suitable for children under the age of 16.
18 ans+: Programming restricted to adults.
The V-Chip will automatically block any category that is ‘More restrictive’. For example, if you block 8 ans+ category, then 13
ans+, 16 ans+ and 18 ans+ will automatically be blocked also.
 Downloadable U.S. Rating
Rating title
The number of current
The number of all
rating information
rating information
Parental restriction information can be used while watching DTV channels
Downloadable U.S. Rating
N If information is not downloaded from the broadcasting station, the Downloadable U.S.
Humor Level
►
1/2
rating menu is deactivated.
Allow All
DH
N Parental restriction information is automatically downloaded while watching DTV channels.
Block All
MH
It may take several seconds.
H
N The Downloadable U.S. rating menu is available for use after information is downloaded
VH
from the broadcasting station. However, depending on the information from the
EH
broadcasting station, it may not be available for use.
n Move E Enter R Return
N Parental restriction levels differ depending on the broadcasting station. The default menu
name and Downloadable US rating changes depending on the downloaded information.
N Even if you set the On-screen display to your desired language, the Downloadable U.S. Rating menu will appear in English
only.
N The rating will automatically block certain categories that are more restrictive.
N The rating titles (For example: Humor Level..etc) and TV ratings (For example: DH, MH, H..etc) may differ depending on the
broadcasting station.
 Change PIN
The Change PIN screen will appear. Choose any 4 digits for your PIN and enter them.
As soon as the 4 digits are entered, the Confirm New PIN screen appears. Re enter the same 4 digits. When the Confirm screen
disappears, your PIN has been memorized.
N If you forget the PIN, press the remote-control buttons in the following sequence, which resets the pin to 0-0-0-0 : POWER
(off) → MUTE → 8 → 2 → 4 → POWER (on).
How to Reset the TV after the V-Chip Blocks a Channel (Emergency Escape)
If the TV is tuned to a restricted channel, the V-Chip will block it. The screen will go blank and
the following message will appear:
1. Enter your PIN, then press the ENTERE button and press the ▲ or ▼ button to
temporarily disable the V-Chip Lock.
N If you forget the PIN, press the remote-control buttons in the following sequence, which resets
the pin to 0-0-0-0 : POWER (off) → MUTE → 8 → 2 → 4 → POWER (on)
Received Rating: TV-14/NL
This channel is blocked by a Parental Lock. Prees enter the PIN to unblock.
CH
Change
0~9 Enter PIN
❑ Caption (On-Screen Text Messages)
 Caption → Off / On
You can switch the caption function on or off. If captions are not available, they will not be displayed on the screen.
O Press the CC button on the remote control to turn the Caption on or off.
N The Caption feature doesn’t work in Component, HDMI or PC modes.
English - 24
BN68-01883B-00L02.indb 24
2009-02-27 �� 10:56:56
 Caption Mode
You can select the desired caption mode.
N The availability of captions depends on the program being broadcast.
● Default / CC1~CC4 / Text1~Text4 (analog channels only)
The Analog Caption function operates in either analog TV channel mode or when a signal is supplied from an external device
to TV. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.)
● Default / CC1~CC4 / Text1~Text4 / Service1~Service6 (digital channels only)
The Digital Captions function operates on digital channels.
N Service1~6 in digital caption mode may not be available depending on the broadcast.
 Digital Caption Options (digital channels only)
● Size: This option consists of Default, Small, Standard and Large. The default is Standard.
● Font Style: This option consists of Default, Style0 ~ Style 7. You can change the font you want. The default is Style 0.
● Foreground Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can
change the color of the letter. The default is White.
● Background Color: This option consists of Default, White, Black, Red, Green, Blue, Yellow, Magenta and Cyan. You can
change the background color of the caption. The default is Black.
● Foreground Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the
opacity of the letter.
● Background Opacity: This option consists of Default, Transparent, Translucent, Solid and Flashing. You can change the
background opacity of the caption.
● Return to Default: This option sets each of Size, Font Style, Foreground Color, Background color, Foreground Opacity
and Background Opacity to its default.
N The Digital Caption Options are only enabled when the Caption Mode is Service 1 ~ Service 6. (If Caption Mode is the
default, the Digital Caption Options are enabled depending on the broadcast.)
N The availability of captions depends on the program being broadcast.
N Default means to follow the standard set by the broadcaster.
N Foreground and Background cannot be set to have the same color.
N Foreground Opacity and Background Opacity cannot be both set to Transparent.
❑ Melody → Off / Low / Medium / High
A melody sound can be set to come on when the TV is powered On or Off.
N The Melody does not play.
– When no sound is output from the TV because the MUTE button has been pressed.
– When no sound is output from the TV because the volume has been reduced to minimum with the VOL – button.
– When the TV is turned off by Sleep Timer function.
❑ Game Mode → Off / On
When connecting to a game console such as PlayStationTM or XboxTM, you can enjoy a more realistic gaming experience by
selecting the game menu.
N Restrictions on game mode (Caution)
– To disconnect the game console and connect another external device, set Game Mode to Off in the setup menu.
– If you display the TV menu in Game mode, the screen shakes slightly.
N If Game Mode is On :
– Picture mode is automatically changed to Standard and cannot be changed.
– Sound mode is automatically changed to Custom and cannot be changed. Adjust the sound using the equalizer.
N Game Mode is not available in regular TV and PC mode.
N If the picture is poor when external device is connected to TV, check if Game Mode is On. Set Game Mode to Off and
connect external devices.
❑ Energy Saving → Off / Low / Medium / High / Auto
This feature adjusts the brightness of the TV in order to reduce power consumption. When watching TV at night, set the Energy
Saving mode option to High to reduce eye fatigue as well as power consumption.
English - 25
BN68-01883B-00L02.indb 25
2009-02-27 �� 10:56:56
Input / Support
¦ Configuring the Input Menu
❑ Source List
Input
Use to select TV or other external input sources such as DVD / Blu-ray players / Cable Box /
Satellite receivers (Set-Top Box) connected to the TV. Use to select the input source of your
choice.
O Press the SOURCE button on the remote control to view an external signal source.
Source List
Edit Name
 TV, AV1, AV2, Component1, Component2, PC, HDMI1/DVI, HDMI2, HDMI3, HDMI4, USB
N You can choose only those external devices that are connected to the TV. In the Source
List, connected inputs will be highlighted and sorted to the top. Inputs that are not
connected will be sorted to the bottom.
N Using the Color buttons on the remote with the Source list
– Red (Refresh): Refreshes the connected external devices. Press this if your Source is on and connected, but does not
appear in the list.
– TOOLS (Tools): Displays the Edit Name and Information menus.
❑ Edit Name
Name the device connected to the input jacks to make your input source selection easier.
 VCR / DVD / Cable STB / Satellite STB / PVR STB / AV Receiver / Game / Camcorder / PC / DVI PC / DVI / TV / IPTV / Blu-ray
/ HD DVD / DMA
N When a PC with a resolution of 1920 x 1080@60Hz is connected to the HDMI IN 1 port, you should set the HDMI1/DVI mode
to DVI PC in the Edit Name of the Input mode.
¦ Configuring the Support Menu
❑ Self Diagnosis
 Picture Test
Support
If you think you have a picture problem, perform the picture test. Check the color pattern on the
screen to see if the problem still exists.
● Yes: If the test pattern does not appear or there is noise in the test pattern, select Yes.
There may be a problem with the TV. Contact Samsung’s call center for assistance.
● No: If the test pattern is properly displayed, select No. There may be a problem with your
external equipment. Please check your connections. If the problem still persists, refer to
the external device’s user manual.
Self Diagnosis
►
Software Upgrade
HD Connection Guide
Contact Samsung
 Sound Test
If you think you have a sound problem, please perform the sound test. You can check the
sound by playing a built-in melody sound through the TV. ‘Does the problem still exist with this
sound test?’ appears on the screen.
N If you hear no sound from the TV’s speakers, before performing the sound test, make sure Speaker Select is set to TV
speaker in the Sound menu.
N The melody will be heard during the test even if Speaker Select is set to External Speaker or the sound is muted by pressing
the MUTE button.
● Yes: If during the sound test you can hear sound only from one speaker or not at all, select Yes. There may be a problem with
the TV. Contact Samsung’s call center for assistance.
● No: If you can hear sound from the speakers, select No. There may be a problem with your external equipment. Please check
your connections. If the problem still persists, refer to the external device’s user manual.
 Signal Strength (digital channels only)
Unlike analog channels, which can vary in reception quality from ‘snowy’ to clear, digital (HDTV) channels have either perfect
reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. You can,
however, adjust your antenna to improve the reception of available digital channels.
N If the signal strength meter indicates that the signal is weak, physically adjust your antenna to increase the signal strength.
Continue to adjust the antenna until you find the best position with the strongest signal.
English - 26
BN68-01883B-00L02.indb 26
2009-02-27 �� 10:56:57
❑ Software Upgrade
Samsung may offer upgrades for TV’s firmware in the future. Please visit Samsung.com or
contact the Samsung call center at 1-800-SAMSUNG (726-7864) to receive information about
downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB
drive to the USB port located on your TV.
USB drive
N Insert a USB drive containing the firmware upgrade into the USB port on the side of the
TV.
N Please be careful to not disconnect the power or remove the USB drive while upgrades are
being applied. The TV will turn off and turn on automatically after completing the firmware
upgrade. Please check the firmware version after the upgrades are complete. When
software is upgraded, video and audio settings you have made will return to their default
(factory) settings. We recommend you write down your settings so that you can easily reset them after the upgrade.
❑ HD Connection Guide
This menu presents the connection method that provides the optimal quality for the HD TV.
Refer to this information when connecting external devices to the TV.
❑ Contact Samsung
View this information when your TV does not work properly or when you want to upgrade the software.
You can view the information regarding the call center, product and software file download method.
Media Play (USB)
¦ Using the Media Play (USB) Function
Application
This function enables you to view and listen to photo (JPEG) and audio files (MP3) saved on a
Anynet+ (HDMI-CEC)
►
USB Mass Storage Class (MSC) device.
Media play (USB)
Press the POWER button on the remote control or your set. Connect a USB device containing
JPEG and/or MP3 files to the Media Play (USB) jack (USB jack) on the side of the TV.
If you enter the Media Play (USB) mode with no USB device connected the message “There
is no device connected” will appear. In this case, insert the USB device, exit the screen by
pressing the MEDIA.P button on the remote control and enter the Media Play (USB) screen
again.
N Only alphanumeric characters must be used as a folder name or file name (photo, music).
N The file system only supports FAT16/32 (The NTFS file system is not supported) Certain
types of USB Digital camera and audio devices may not be compatible with this TV.
N Media Play (USB) only supports the USB Mass Storage Class device (MSC). MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives and Flash Card Readers (Both USB HDD and HUB are not supported.)
N Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data. SAMSUNG is
not responsible for any data file damage or data loss.
N Please connect directly to the USB port of your TV. If you are using a separate cable connection, there may be a USB
Compatibility problem.
N Only MP3 and JPEG file formats are supported.
N The Media Play (USB) mp3 format only supports music files with a high sampling frequency (32 kHz, 44.1 kHz, or 48 kHz).
N We recommend the sequential jpeg format.
N Do not disconnect the USB device while it is loading.
N MTP (Media Transfer Protocol) is not supported.
N The playing duration of an mp3 file may be displayed as ‘00:00:00’ if its playing time information is not found at the start of the
file.
N The higher the resolution of the image, the longer it takes to display on the screen.
N The Photo or Music List displays up to 300 folders or files.
N Loading may take some time depending on the size of the file.
N MP3 files with DRM that have been downloaded from a non-free site cannot be played.
N Digital Rights Management (DRM) is a technology that supports the creation of content, the distribution and management
of the content in an integrated and comprehensive way, including the protection of the rights and interests of the content
providers, the prevention of the illegal copying of contents, as well as managing billings and settlements.
English - 27
BN68-01883B-00L02.indb 27
2009-02-27 �� 10:56:57
¦ Using the Media Play (USB) Menu
Application
1. Press the MENU button. Press the ▲ or ▼ button to select Application, then press the
ENTERE button.
2. Press the ▲ or ▼ button to select Media Play (USB), then press the ENTERE button.
3. Press the ▲ or ▼ button to select the corresponding USB Memory Device, then press the
ENTERE button.
N The Media Play (USB) menu differs depending on the USB Memory Device
connected to TV.
N Some devices may not be supported due to compatibility problems.
4. Press the ◄ or ► button to move to an icon, then press the ENTERE button.
O To exit Media Play (USB) mode, press the MEDIA.P button on the remote control.
Anynet+ (HDMI-CEC)
►
Media play (USB)
Using the Remote Control Button in Media Play (USB) Menu
Button
Operations
▲ /▼ / ► / ◄
Move the cursor and select an item
Select the currently selected item.
∂
Play or pause the Slide Show or MP3 file.
∫
Pause the Slide Show or MP3 file.
RETURN R
INFO
∫
Return to the previous menu
Run various functions from the Photo and Music menus.
Stop the current slide show or MP3 file.
π/µ
Page Up or Down (file list item)
EXITe
Stop the current function and return to the previous high-level menu.
¦ Using the PHOTO (JPEG) List
This menu shows JPEG files and folders saved on an USB memory device.
1. Complete Steps 1 to 3 of ‘Using the Media Play (USB) Menu’.
XTICK
861MB/994MB
2. Press the ◄ or ► button to move to Photo, then press the ENTERE button. The saved
Free
file information is displayed as a folder or file.
3. Press the ▲, ▼, ◄ and ► buttons to select a file.
– Pressing the ENTERE button over a photo icon shows the currently selected photo
n Move E Enter R Return
in full screen.
– Pressing the ENTERE button over a folder icon shows the JPEG files included in
the folder.
O Press the MEDIA.P button on the remote control to display the Media Play (USB)
menu.
N To exit Media Play (USB) mode, press the MEDIA.P button on the remote control.
N Moving to a photo may take a few seconds to load the file. At this point, the
Select n Move IOption E Enter R Return
icon will appear at the top left of the screen.
N It takes time to show JPEG files as Thumbnail images.
N This menu only shows files whose file extension is jpg. Files of other formats such as bmp or tiff will not be displayed.
N The files are displayed on a page. 15 thumbnail photos are displayed per page.
N The thumbnails are numbered from left to right and from top to bottom, from 1 to 15.
N Certain types of USB Digital camera and audio devices may not be compatible with this TV.
N Folders are displayed first and they are followed by all JPEG files in the current folder.
N The folders and JPEG files appear in the order of the time they were saved to the USB memory device.
N If the photo is displayed in full screen, you can zoom in and out or rotate the photo on the screen.
N While a full screen is displayed, ◄ or ► button will let you see another photo image in the same folder.
N Press the ∂ button when a Photo icon is selected to start a Slide Show.
N Photos without EXIF information may not be displayed as thumbnail images in the PHOTO LIST depending on the picture
quality and resolution.
Up Folder
Forder1
Photo 0001
Photo 0001
None
File 4
File 5
File 6
File 7
File 8
File 9
File 10
File 11
File 12
File 13
English - 28
BN68-01883B-00L02.indb 28
2009-02-27 �� 10:56:58
❑ Viewing a Slide Show
1. Press the INFO button to display the option View, Start Slide Show, Delete, Delete All,
Deselect All.
2. Press the ▲ or ▼ button to select Start Slide Show then press the ENTERE button.
View
Start Slide Show
N During the slide show, files are displayed in order from the currently shown file.
Delete
N MP3 files can be automatically played during the Slide Show if the Default Background Delete All
Deselect All
Music is set to On. To enable this function, MP3 files and other photo files must be
I Exit
Select n Move I Option
located in the same folder on the USB Memory Device.
3. Press the INFO button during the slide show to set the following options Slide Show Speed, Background Music,
Background Music Setting, List. Press the ▲ or ▼ button to select the option, then press the ENTERE button.
– After setting the option press the ENTERE button to make a change.
Up Folder
Forder1
File 4
File 9
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
E Enter R Return
 View
N Select a photo to view
 Start Slide Show
Select a photo to view.
 Delete
Select a photo to delete. Press the ▲ or ▼ button to select Delete, then press the ENTERE button.
N While removing files, don’t remove the USB memory device.
N You cannot recover deleted music files.
 Delete All
You can delete all files.
 Deselect All
You can deselect all files.
❑ Using the Menu during a Slide Show
 Slide Show Speed
Select to control the slide show speed. Press the ▲ or ▼ button to select the required option (Fast, Normal, Slow), then press the
ENTERE button.
 Background Music
Select to choose whether you want to play an MP3 file during a slide show.
Press the ▲ or ▼ button to select the required option (On, Off), then press the ENTERE
button.
Slide Show Speed :Fast ►
Background Music : On
Background Music Setting
 Background Music Setting
List
I Exit
While the slide show is in progress, MP3 files and folders under the same directory are
displayed.
Press the ▲ or ▼ button to select a music file, then press the yellow button. The (c) mark appears to the left of the selected
music.
Repeat the above operation to select multiple music files.
Press the ENTERE button.
N If you turn Off the Background Music, even if the Background Music Settings have been set up, the background music will
not be played.
 List
The file information is displayed as a folder or JPEG file.
To exit Media Play (USB) mode, press the MEDIA.P button on the remote control.
N When selecting a photo file, the photo file information is displayed on the left side of the TV screen, such as the resolution, the
date modified and the order of the file in the current directory (e.g. 10th out of 15).
English - 29
BN68-01883B-00L02.indb 29
2009-02-27 �� 10:56:58
❑ Using the Option Menu
1. Complete Steps 1 to 3 of ‘Using the Media Play (USB) Menu’. (Refer to page 28)
2. Press the ◄ or ► button to move to Photo, then press the ENTERE button. The saved file information is displayed as a
folder or file.
3. Press the ▲, ▼, ◄ and ► button to select a file, then press the ENTERE button. Pressing the button over a photo
thumbnail displays the photo in full screen.
4. Press the INFO button to display the option (Start Slide Show, Zoom, Rotate, List)
 Start Slide Show
Press the ▲ or ▼ button to select Start Slide Show, then press the ENTERE button. You
can start a Slide Show.
 Zoom
Start Slide Show
Press the ▲ or ▼ button to select Zoom, then press the ENTERE button.
Zoom
: X1
Rotate
: 0
Select the required option by pressing the ▲ or ▼ button, then press the ENTERE button.
List
(X1, X2, X4)
I Exit
N To pan up/down/left/right in the zoomed-in photo, press the INFO button to exit option
menu, then press the ▲, ▼, ◄ and ► buttons.
N Start Slide Show or Rotate is disabled when the Zoom option is selected.
N X1: Restore a photo to its original size.
X2: Zoom-in to a photo x2.
X4: Zoom-in to a photo x4.
/
/
/
: Move the zoomed-in photo up/down/right/left.: Move the zoomed-in photo up/down/right/left.
 Rotate
Press the ▲ or ▼ button to select Rotate, then press the ENTERE button.
Select the required option by pressing the ▲ or ▼ button, then press the ENTERE button. (0, 90, 180, 270)
The rotated file is not saved.
Start Slide Show or Zoom is disabled when the Rotate option is selected.
N 0: This rotates a photo to its original position
N 90: This rotates a photo by 90 degrees
N 180: This rotates a photo by 180 degrees
N 270: This rotates a photo by 270 degrees
¦ Using the MP3 List
This menu shows MP3 files from among the files saved on a USB memory device.
1. Complete Steps 1 to 3 of ‘Using the Media Play (USB) Menu’. (Refer to page 28)
XTICK
861MB/994MB
Free
2. Press the ◄ or ► button to move to Music, then press the ENTERE button. The saved
file information is displayed as a folder or file.
3. Press the ▲ or ▼ button to move to an icon, then press the ENTERE button.
– Pressing the ENTERE button over a musical note icon immediately plays the music
n Move E Enter
file.
– Pressing the ENTERE button over a folder icon shows the music files included in the folder.
– To select a file on the next page, press the π or µ button to move to the next page.
4. To select all files or a file, press the INFO button to display the Music menus. Press the ENTERE button to select Play,
Repeat Music or Select All.
To exit Media Play (USB) mode, press the MEDIA.P button on the remote control.
N The folders and MP3 files appear in the order of the time they were saved to the USB memory device.
R Return
❑ Using the Option Menu
 Play
Select to play MP3 files.
N Press the ∑ button while playing an MP3 file to pause the file.
Music
5MB
N Press the ∫ button to exit Play mode.
Jun 1,2009
3/23
N This menu only shows files with the MP3 file extension. Files with other file extensions are
Play
not displayed,even if they are saved on the same USB device.
Repeat Music Off ►
Delete
N The selected file is displayed on the top with its playing time.
Delete All
N To adjust the music volume, press the y button on the remote control. To mute the Deselect All
I
ExitSelect n Move I Option E Enter
sound, press the MUTE button on the remote control.
N If the sound is odd when playing MP3 files, exit Media Play (USB) mode and adjust the
Equalizer and SRS Trusurround HD in the Sound menu. (An over-modulated MP3 file may cause a sound problem.)
006-006
All
00:04:00
Upper Folder
Folder 1
001-001
00:04:01
002-002
003-003
00:04:28
00:04:12
004-004
00:05:39
005-005
00:04:30
006-006
007-007
00:04:30
00:03:54
008-008
00:05:25
R Return
English - 30
BN68-01883B-00L02.indb 30
2009-02-27 �� 10:56:59
 Repeat Music
Select to repeatedly play MP3 files in the current folder.
You can select On or Off.
 Delete
Select a MP3 files to delete. Press the ▲ or ▼ button to select Delete, then press the ENTERE button.
N While removing files, don’t remove the USB memory device.
N You cannot recover deleted music files.
 Delete All
You can delete all files.
 Deselect all
You can deselect all files.
Music function information icon
All
All : When all music files in the folder (or the selected file) are repeated. Repeat Music is On.
: When all music files in the folder (or the selected file) are played once. Repeat Music is Off.
/ : When pressing the ∂ / ∑ button on the remote control while music is playing.
: When pressing the ∫ button on the remote control when music is stopped.
❑ Using the Setup Menu
Setup displays the user settings of the Media Play (USB) menu.
1. Complete Steps 1 to 3 of ‘Using the Media Play (USB) Menu’. (Refer to page 28)
2. Press the ◄ or ► button to move to Setup, then press the ENTERE button.
3. Press the ▲ or ▼ button to select an item you want, then press the ENTERE button.
(Slide Show Speed, Background Music, Background Music Setting, Repeat Music,
Screen Saver, Safe Remove)
4. Press the ▲ or ▼ button to select the option, then press the ENTERE button.
To exit Media Play (USB) mode, press the MEDIA.P button on the remote control.
 Slide Show Speed
Select to control the slide show speed. You can select Fast, Normal or Slow.
 Background Music
n Move
Slide Show Speed
Background Music
Background Music Setting
Repeat Music Screen Saver
Safe Remove
Select to determine whether to play an MP3 file during a slide show.
You can select Music On or Music Off.
U Move
E Enter
R Return
Fast: Normal
Normal
: On Slow
: Off
: 4hour
E Enter
R Return
 Background Music Setting
While a slide show is in progress, use the Background Music Setting to select a music file to listen to. Select an MP3 file as the
background music.
 Repeat Music
Select to determine whether to repeat playing the music when all MP3 files in the current folder have been played.
 Screen Saver
Select to set the waiting time before the screen saver appears.
The screensaver will appear when no button is pressed for 4, 8 or 10 hour.
 Safe Remove
You can remove the device safely from the TV.
English - 31
BN68-01883B-00L02.indb 31
2009-02-27 �� 10:57:00
Anynet+
¦ Connecting Anynet+ Devices
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung TV’s
remote.
The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your Samsung device has
this feature, check if there is an Anynet+ logo on it.
To connect to a TV
TV
Anynet+ Device 1
HDMI 1.3 Cable
Anynet+ Device 2
HDMI 1.3 Cable
Anynet+ Device 3
HDMI 1.3 Cable
Anynet+ Device 4
HDMI 1.3 Cable
HDMI 1.3 Cable
1. Connect the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
To connect to Home Theater
TV
Anynet+ Device 1
HDMI 1.3 Cable
Home Theater
HDMI 1.3 Cable
Anynet+ Device 2
Anynet+ Device 3
HDMI 1.3 Cable
Anynet+ Device 4
HDMI 1.3 Cable
1. Connect the HDMI IN (1, 2, 3 or 4) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
2. Connect the HDMI IN jack of the home theater and the HDMI OUT jack of the corresponding Anynet+ device using an HDMI
cable.
N Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input on the
Home Theater.
N When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound from the Home
Theater’s Front Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio, connect the DIGITAL
AUDIO OUT (OPTICAL) jack on the DVD / Satellite Box (ie Anynet Device 1 or 2) directly to the Amplifier or Home Theater,
not the TV.
N Connect only one Home Theater.
N You can connect an Anynet+ device using the HDMI 1.3 cable. Some HDMI cables may not support Anynet+ functions.
N Anynet+ works when the AV device supporting Anynet+ is in the Standby or On status.
N Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
English - 32
BN68-01883B-00L02.indb 32
2009-02-27 �� 10:57:00
¦ Setting Up Anynet+
T Press the TOOLS button to display the Tools menu. You can also display Anynet+ menu by selecting Tools → Anynet+
(HDMI-CEC).
❑ Setup
 Anynet+ (HDMI-CEC) → Off / On
Application
To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
N When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations
are deactivated.
 Auto Turn Off → No / Yes
Anynet+ (HDMI-CEC)
►
Media play (USB)
Setting an Anynet+ Device to turn Off Automatically when the TV is Turned Off
N The active source on the TV remote must be set to TV to use the Anynet+ function.
N If you set Auto Turn Off to Yes, connected external devices are also turned off when the
TV is turned off. If an external device is still recording, it may or may not turn off.
Device List
Setup
U Move
Anynet+(HDMI-CEC)
:
On
Auto Turn Off
:
Yes
U Move
E Enter
R Return
E Enter
R Return
¦ Switching between Anynet+ Devices
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
View TV
2. Press the ▲ or ▼ button to select Device List, then press the ENTERE button.
Device List
N Anynet+ devices connected to the TV are listed.
Record :
DVDR
DVDR Menu
N If you cannot find a device you want, press the red button to scan for devices.
DVDR Operation
3. Press the ▲ or ▼ button to select a particular device and press the ENTERE button. It
Setup
is switched to the selected device.
+
N Only when you set Anynet (HDMI-CEC) to On in the Application menu, the Device
List menu appears.
U Move E Enter R Return
N Switching to the selected devices may take up to 2 minutes. You cannot cancel the
operation during the switching operation.
N The time required to scan for devices is determined by the number of connected devices.
N When the device scan is complete, the number of devices found are not displayed.
N Although the TV automatically searches the device list when the TV is turned on via the power button, devices connected to
the TV when the TV is on or under some conditions are not automatically displayed in the device list. Press the red button to
search for the connected device.
N If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function. Make sure to
switch to an Anynet+ device by using the Device List.
English - 33
BN68-01883B-00L02.indb 33
2009-02-27 �� 10:57:01
Anynet+ Menu
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu
View TV
Device List
Description
Anynet+ mode changes to TV broadcast mode.
Shows the Anynet+ device list.
Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of the
DVD recorder will appear.
Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the play
menu of the DVD recorder will appear.
(device_name) Menu
(device_name) Operation
Record: (*recorder)
Starts recording immediately using the recorder. (This is only available for devices that support
the recording function.)
Stop Recording: (*recorder)
Receiver
Stops recording.
Sound is played through the receiver.
N If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
TV Remote Control Buttons Available in Anynet+ Mode
Device Type
Anynet+ Device
Operating Status
After switching to the device, when the menu
of the corresponding device is displayed on the
screen.
After switching to the device, while playing a file
Device with built-in
Tuner
Audio Device
N
N
N
N
N
N
After switching to the device, when you are
watching a TV program
When Receiver is activated
Available Buttons
Numeric buttons ▲/▼/◄/►/ENTEREbuttons
Color buttons / EXIT button
π (Backward search) / µ (Forward search) /
∏ (Stop) / ∂ (Play) / ∑ (Pause)
z button
y / MUTE button
The Anynet+ function only works when the active source on the TV remote control is set to TV.
The ∏ button works only while in the recordable state.
You cannot control Anynet+ devices using the buttons on the TV. You can control Anynet+ devices only using the TV remote
control.
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
The Anynet+ functions do not operate with other manufacturers’ products.
The π, µ operations may differ depending on the device.
¦ Recording
You can make a recording of a TV program using a Samsung recorder.
Viwe TV
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
Device List
2. Press the ▲ or ▼ button to select Recording Immediately and press the ENTERE
Record :
DVDR
button. Recording begins.
DVDR Menu
DVDR Operation
N When there is more than one recording device
Setup
When multiple recording devices are connected, the recording devices are listed.
Press the ▲ or ▼ button to select a recording device and press the ENTERE
button. Recording begins.
U Move E Enter R Return
N When the recording device is not displayed
Select Device List and press the red button to search devices
3. Press the EXIT button to exit.
N You can record the source streams by selecting Record: (device_name).
N Pressing the ∏ button will record whatever you are currently watching. If you are watching video from another device, the
video from the device is recorded.
N Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an
antenna to a recording device, refer to the recording device’s users manual.
English - 34
BN68-01883B-00L02.indb 34
2009-02-27 �� 10:57:01
¦ Listening through a Receiver (Home theater)
You can listen to sound through a receiver instead of the TV speaker.
Viwe TV
1. Press the TOOLS button. Press the ENTERE button to select Anynet+ (HDMI-CEC).
Device List
2. Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off. Record :
DVDR
DVDR Menu
3. Press the EXIT button to exit.
DVDR Operation
N If your receiver supports audio only, it may not appear in the device list.
Receiver : Off
Setup
N The receiver will work when you have properly connected the optical in jack of the
receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
U Move E Enter R Return
N When the Home Theater receiver is set to On, you can hear sound output from the
TV’s Optical jack. When the TV is displaying a DTV(air) signal, the TV will send out
5.1 channel sound to the Home theater receiver. When the source is a digital component such as a DVD and is connected
to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.
N If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power
failure), the Speaker Select may be set to External Speaker when you turn the TV on again.
¦ Troubleshooting for Anynet+
Problem
Anynet+ does not work.
Possible Solution
● Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+
devices only.
● Connect only one receiver (home theater).
● Check if the Anynet+ device power cord is properly connected.
● Check the Anynet+ device’s Video/Audio/HDMI 1.3 cable connections.
● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
● Check whether the TV remote control is in TV mode.
● Check whether it is Anynet+ exclusive remote control.
● Anynet+ doesn’t work in certain situations. (Searching channels, Operating, Plug & Play,
etc.)
● When connecting or removing the HDMI 1.3 cable, please make sure to search devices
again or turn your TV off and on again.
● Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+.
● Check if the Anynet+ device is properly connected to the TV and check if the Anynet+
(HDMI-CEC) is set to On in the Anynet+ Setup menu.
● Press the TV button on the TV remote control to switch to TV. Then press the TOOLS
button to show the Anynet+ menu and select a menu you want.
+
I want to exit Anynet .
● Select View TV in the Anynet+ menu.
● Press the SOURCE button on the TV remote control and select a device other than
Anynet+ devices.
● Press z, CH LIST, PRE-CH, and FAV.CH to change the TV mode. (Note
that the channel button operates only when a tuner-embedded Anynet+ device is not
connected.)
The message Connecting to
● You cannot use the remote control when you are configuring Anynet+ or switching to a
view mode.
Anynet+ device... appears on the
screen.
● Use the remote control when the Anynet+ setting or switching to view mode is complete.
The Anynet+ device does not
● You cannot use the play function when Plug & Play is in progress.
play.
The connected device is not
● Check whether or not the device supports Anynet+ functions.
displayed.
● Check whether or not the HDMI 1.3 cable is properly connected.
● Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
● Search Anynet+ devices again.
● You can connect an Anynet+ device using the HDMI 1.3 cable only. Some Some HDMI
cables may not support Anynet+ functions.
● If it is terminated by an abnormal situation such as disconnecting the HDMI cable or
power cord or a power failure, please repeat the device scan.
The TV program cannot be
● Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output
● Connect the optical cable between TV and the receiver.
through the receiver.
English - 35
BN68-01883B-00L02.indb 35
2009-02-27 �� 10:57:01
Appendix
¦ Troubleshooting
If the TV seems to have a problem, first try this list of possible problems and solutions. If none of these troubleshooting tips apply,
please visit Samsung.com or contact the Samsung call center at 1-800-SAMSUNG (726-7864).
Problem
Possible Solution
Poor picture.
Try another channel. / Adjust the antenna. / Check all wire connections.
Poor sound quality.
Try another channel. / Adjust the antenna.
No picture or sound.
Try another channel. / Press the SOURCE button.
Make sure the TV is plugged in. / Check the antenna connections.
No sound or sound is too low at
maximum volume.
First, check the volume of units connected to your TV (digital broadcasting receiver, DVD,
cable broadcasting receiver, VCR, etc.). Then, adjust the TV volume accordingly.
Picture rolls vertically.
Check all wire connections.
There is a problem with the picture
Run the Picture test in the Self diagnostic menu.
There is a problem with the sound
Run the Sound test in the Self diagnostic menu.
The TV operates erratically.
Unplug the TV for 30 seconds, then try operating it again.
The TV won’t turn on.
Make sure the wall outlet is working.
Remote control malfunctions.
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check the battery terminals.
‘Check signal cable’ message.
Ensure that the signal cable is firmly connected to the PC source.
‘Not Supported Mode’ message.
Check the maximum resolution and connected device’s Video frequency.
Compare these values with the data in the Display Modes.
Digital broadcasting screen
problem.
Please check the digital signal strength and input antenna.
The image is too light or too dark.
Adjust the Brightness and Contrast. / Adjust the Fine tuning.
Black bars on the screen.
Make sure the broadcast you’re receiving is High Definition (HD).
HD channels sometimes broadcast Standard Definition (SD) programming, which can
cause black bars.
Set your cable/satellite box to stretch or widescreen mode to eliminate the bars.
Picture has a Red/Green or Pink
tint.
Make sure the Component cables are connected to the correct jacks.
Closed Captioning not working.
If you are using a Cable/Satellite box, you must set Closed Captioning on the box, not
your TV.
Snowy picture.
Your cable box may need a firmware upgrade. Please contact your Cable company.
Ghosting on picture.
This is sometimes caused by compatibility issues with your cable box.
Try connecting Component cables instead.
Horizontal bars appear to flicker,
jitter or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Vertical bars appear to flicker, jitter
or shimmer on the image.
Adjust the Coarse tuning and then adjust the Fine tuning.
Screen is black and power indicator
light blinks steadily.
On your computer check: Power, Signal Cable.
The TV is using its power management system.
Move the computer's mouse or press any key on the keyboard.
Image is not stable and may
appear to vibrate when you have
a computer connected to the PC
input.
If the setting is not correct, use your computer utility program to change the display
settings.
Your TV supports multiscan display functions within the following frequency domain:
- Horizontal frequency (KHz): 30~60
- Vertical frequency (Hz): 60~75
- PC Maximum refresh rate (at 60 Hz): 1920 x 1080
Image is not centered on the
screen.
Adjust the horizontal and vertical position.
The screen position must be adjusted on the output source (i.e. STB) with a digital signal.
English - 36
BN68-01883B-00L02.indb 36
2009-02-27 �� 10:57:01
Problem
Possible Solution
The picture appears distorted in the
corner of the screen.
If Screen Fit is selected with some external devices, the picture may appear distorted in
the corner of the screen. This symptom is caused by the external devices, not TV.
The ‘Resets all settings to the
default values.’ message appears.
This appears when you press and hold the EXIT button for a while. The product settings
are reset to the factory defaults.
N This TFT LCD panel uses a panel consisting of sub pixels (6 220 800) which require sophisticated technology to produce.
However, there may be few bright or dark pixels on the screen. These pixels will have no impact on the performance of the
product.
¦ Installing the Stand
1. Attach your LCD TV to the stand.
N Two or more people should carry the TV.
N Make sure to distinguish between the front and back of the stand when attaching it.
N To make sure the TV is installed on the stand at a proper level, do not apply excess downward pressure to the upper left
of right sides of the TV.
2. Fasten two screws at position 1 and then fasten two screws at position 2.
N Stand the product up and fasten the screws. If you fasten the screws with the LCD TV placed down, it may lean to one
side.
¦ Disconnecting the Stand
1. Remove four screws from the back of the TV.
2. Separate the stand from the TV.
N Two or more people should carry the TV.
3. Cover the bottom hole with the cover.
English - 37
BN68-01883B-00L02.indb 37
2009-02-27 �� 10:57:02
¦ Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other
building materials, please contact your nearest dealer. If installed on a ceiling or slanted wall, it
may fall and result in severe personal injury.
N Standard dimensions for wall mount kits are shown in the table above.
N When purchasing our wall mount kit, a detailed installation manual and all parts necessary
for assembly are provided.
N Do not use screws longer than the standard dimension, as they may cause damage to the
inside of the TV set.
N For wall mounts that do not comply with the VESA standard screw specifications, the
length of the screws may differ depending on their specifications.
N Do not use screws that do not comply with the VESA standard screw specifications.
N Do not fasten the screws too strongly, this may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
N Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
consumer fails to follow the product installation instructions.
N Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our dedicated wall mount kit for
this model.
N Do not exceed 15 degrees tilt when mounting this TV.
Product Family
LCD-TV
PDP-TV
LFD
inches
VESA Spec. (A * B)
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
Standard Screw
Quantity
M4
M6
4
M8
M8
4
M6
4
M8
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to electric shock.
¦ Using the Anti-Theft Kensington Lock
The Kensington Lock is a device used to physically fix the system when using it in a public
place. The appearance and locking method may differ from the illustration depending on the
manufacturer.
Refer to the manual provided with the Kensington Lock for proper use. The locking device has
to be purchased separately.
N The location of the Kensington Lock may be different depending on its model.
1. Insert the locking device into the Kensington slot on the LCD TV (1) and turn it in the
locking direction (2).
2. Connect the Kensington Lock cable (3).
3. Fix the Kensington Lock to a desk or a heavy stationary object.
3
2
1
English - 38
BN68-01883B-00L02.indb 38
2009-02-27 �� 10:57:02
¦ Securing the TV to a Wall or Cabinet
Caution: Pulling, pushing, or climbing on the TV may cause the TV to fall. In particular, ensure your children do not
hang over or destabilize the TV; doing so may cause the TV to tip over, causing serious injuries or death. Follow
all safety precautions provided on the included Safety Flyer. For added stability, install the anti-fall device for safety
purposes, as follows.
 Components (Depending on the model):
TV-Holder
Screw 1 (M4X 16)
 To prevent the TV from falling:
1. Attach the TV-Holder to the TV by fastening the screws 1 (M4X 16) into the holes in the center of the TV.
N Make sure to only use the supplied screws.
cabinet
2. Firmly fasten the screws to the wall or cabinet where the TV is to be installed. Tie the TV-Holder attached to the TV and the
screws fastened on the wall or cabinet so that the TV is fixed.
N Purchase the screws to be used on the wall or cabinet separately.
N Install the TV close to the wall so that it does not fall.
N When attaching the TV to the wall, tie the cord level with the ground or slanted downwards for safety purposes.
N Confirm that the cord or link does not come loose frequently.
N Before moving the TV, separate the connected cord first.
cabinet
cabinet
. Verify all connections are properly secured. Periodically check connections for any sign of fatigue or failure. If you have any
doubt about the security of your connections, contact a professional installer.
English - BN68-01883B-00L02.indb 39
2009-02-27 �� 10:57:03
¦ Specifications
LN40B540
LN46B540
LN52B540
Screen Size
(Diagonal)
40 inches
(39.9 inches measured
diagonally)
46 inches
(45.9 inches measured
diagonally)
52 inches
(52 inches measured
diagonally)
PC Resolution (Optimum)
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W x 2
10W x 2
10W x 2
39.3 X 3.1 X 24.6 inches
(998.0 x 78.4 x 625.8 mm)
39.3 X 10.0 X 27.1 inches
(998.0 x 255.0 x 689.0 mm)
44.4 X 3.1 X 28.2 inches
(1127.0 x 77.8 x 717.4 mm)
44.4 X 10.8 X 30.3 inches
(1127.0 x 275.0 x 769.5 mm)
50.0 X 3.1 X 31.7 inches
(1269.0 x 79.9 x 804.1 mm)
50.0 X 12.0 X 33.8 inches
(1269.0 x 305.0 x 859.2 mm)
33.3 Ibs (15.1 kg)
40.1 Ibs (18.2 kg)
43.7 Ibs (19.8 kg)
53.1 Ibs (24.1 kg)
55.6 Ibs (25.2 kg)
63.9 Ibs (29.2 kg)
Sound
(Output)
Dimensions (WxDxH)
Without Stand
With stand
Weight
Without Stand
With Stand
Environmental
Considerations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
Stand Swivel
Left / Right
-20˚ ~ 20˚
N Design and specifications are subject to change without prior notice.
N This device is a Class B digital apparatus.
N For the power supply and Power Consumption, refer to the label attached to the product.
English - 40
BN68-01883B-00L02.indb 40
2009-02-27 �� 10:57:03
¦ Dimensions
LN40B540
TOP VIEW
JACK PANEL DETAIL 5.2"H X 6.6"W
3.1
39.3
34.9
24.6
19.7
27.1
24.4
10.0
FRONT VIEW / SIDE VIEW
7.9 (200 mm)
7.9 (200 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some
dimensions are subject to change without prior notice. Refer to
the dimensions prior to performing installation of your TV. Not
responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc
English - 41
BN68-01883B-00L02.indb 41
2009-02-27 �� 10:57:03
LN46B540
TOP VIEW
JACK PANEL DETAIL 5.2"H X 6.6"W
3.1
44.4
40.2
28.2
22.6
30.3
24.4
10.8
FRONT VIEW / SIDE VIEW
15.7 (400 mm)
15.7 (400 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some
dimensions are subject to change without prior notice. Refer to
the dimensions prior to performing installation of your TV. Not
responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc
English - 42
BN68-01883B-00L02.indb 42
2009-02-27 �� 10:57:04
LN52B540
TOP VIEW
JACK PANEL DETAIL 5.2"H X 6.6"W
3.1
50.0
45.6
31.7
25.7
33.8
24.4
12.0
FRONT VIEW / SIDE VIEW
15.7 (400 mm)
15.7 (400 mm)
REAR VIEW
NOTE: All drawings are not necessarily to scale. Some
dimensions are subject to change without prior notice. Refer to
the dimensions prior to performing installation of your TV. Not
responsible for typographical or printed errors.
© 2009 Samsung Electronics America, Inc
English - 43
BN68-01883B-00L02.indb 43
2009-02-27 �� 10:57:04
BN68-01883B-00L02.indb 1
2009-02-27 �� 10:57:04
Reproductor multimedia (USB)
Conexiones
Anynet+
❑ Símbolo
N
O
T
Nota
2009-02-27 �� 10:57:04
Cubierta inferior
(LN40B540 : BN63-05330A)
(LN46B540 : BN63-05332A)
(LN52B540 : BN63-05332A)
Tornillo (M4 x L16)
(6002-001294)
2009-02-27 �� 10:57:05
1
2
3
4
5
8
76
2009-02-27 �� 10:57:05
2 3
4
5
6
[Panel lateral del TV]
1
7
!
0
9
8
2009-02-27 �� 10:57:06
1
#
2
3
4
$
5
%
6
7
^
&
*
(
)
8
a
9
0
!
b
c
d
e
@
2009-02-27 �� 10:57:06
ANT IN
ANT IN
UHF
VHF
ANT IN
ANT IN
ANT IN
ANT OUT
ANT IN
2009-02-27 �� 10:57:07
Conmutador RF (A/B)
Panel posterior del TV
o
Panel lateral del TV
o
2009-02-27 �� 10:57:07
Reproductor DVD/Blu-ray/receptor por cable/
satélite (decodificador)
2009-02-27 �� 10:57:08
Panel lateral del TV
Panel posterior del VCR
2009-02-27 �� 10:57:08
Amplificador/DVD de Home Cinema
2009-02-27 �� 10:57:09
Uso de un cable HDMI
Panel lateral del TV
2009-02-27 �� 10:57:09
PC
PC
Panel lateral del TV
PC
o
o
2009-02-27 �� 10:57:10
Imagen
Modo
: Normal
Luz de fondo
:8
Contraste
: 95
Brillo
: 45
: 50
Color
: 50
Tinte (V/R)
: V50/R50
Imagen
Imagen
Modo
: Normal
Luz de fondo
:8
Contraste
: 95
Brillo
: 45
: 50
Color
: 50
Tinte (V/R)
: V50/R50
Modo : Normal
Luz de fondo
:8
Contraste
: 95
Brillo
: 45
: 50
Color
: 50
Tinte (V/R)
: V50/R50
Luz de fondo
:8
Contraste
: 95
Brillo : 45 : 50
Color
: 50
Tinte (V/R)
: V50/R50
►
►
L Ajustar
E Ingresar
Brillo
U Mover
L Ajustar
E Ingresar
45
R Regresar
80
R Regresar
2009-02-27 �� 10:57:11
2009-02-27 �� 10:57:11
Antena
: Aire ►
Prog. Auto
Clear Scrambled Channel
Lista de canales
❑ Prog. Auto
Sintonia Fina
2
Aire
4
Aire
4-2 ♥ TV #8
8
Aire
13
Aire
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Aire
Zoom
2009-02-27 �� 10:57:11
 Agregar / Borrar
2
Aire
4
Aire
4-2 ♥ TV #8
8
Aire
13
Aire
Seleccionar todo
13-1 ♥ TV #3 Alice’s Adventures in Wonderland
Prog. Auto
Aire
Zoom
 Agregar a Favoritos / Borrar de Favoritos
2009-02-27 �� 10:57:11
1 / 1 / 2009
9:08 am5
3:15 pm
2
5:50 pm
2
Aire
Zoom
Modo : Normal
Luz de fondo
:8
Contraste
: 95
Brillo
: 45
: 50
Color
: 50
Tinte (V/R)
: V50/R50
►
 Cine
: Apagado
Contraste Dinám.
: Medio
Gamma
:0
: Nativo
►
:0
: Encendido
U Mover
E Ingresar
R Regresar
2009-02-27 �� 10:57:12
 Contraste Dinám. → Apagado / Bajo / Medio / Alto
: Normal
: 16:9
Digital NR
: Auto
N.neg HDMI
: Normal
: Apagado
U Mover
E Ingresar
►
R Regresar
Zoom1 U Mover
Zoom2 U Mover
16:9
Zoom1
Zoom2
Ajuste ancho U Mover
4:3
Ajuste pantalla
Ajuste ancho
4:3
Ajuste pantalla
2009-02-27 �� 10:57:12
Picture Size
TV, Video, Componente (480i, 480p)
16:9, Zoom1, Zoom2, 4:3
DTV(1080i), Componente (1080i, 1080p), HDMI (720p, 1080i, 1080P)
PC
16:9, 4:3
2009-02-27 �� 10:57:12
Mode
IBM
640 x 350
720 x 400
640 x 480
832 x 624
1152 x 870
720 x 576
1152 x 864
1280 x 720
1280 x 960
1280 x 720
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
800 x 600
1024 x 768
1024 x 768
1024 x 768
1152 x 864
1280 x 1024
1280 x 1024
1280 x 800
1280 x 800
1280 x 960
1360 x 768
1440 x 900
1440 x 900
1680 x 1050
1280 x 720
1280 x 1024
MAC
VESA CVT
VESA DMT
VESA GTF
VESA DMT / DTV
CEA
1920 x 1080p
60.000
+/+
❑ Ajuste Automático
Imagen
Brillo
: 45
: 50
►
2009-02-27 �� 10:57:13
Sound
Modo : Favorito
►
: Apagado
Idioma preferido : Inglés
Sonido Multi-track
: Mono
Vol.Auto
: Apagado
Seleccionar altavoz
: Altavoz de TV
 Balance I/D
2009-02-27 �� 10:57:13
Plug & Play
Idioma ►
2009-02-27 �� 10:57:13
 Temporizador 1 / Temporizador 2 / Temporizador 3
Perm. todo
Bloq. todo
R Regresar
2009-02-27 �� 10:57:13
●
●
●
●
●
●
N
●
●
●
●
●
N
CH
0~9 Ingresar Código
2009-02-27 �� 10:57:13
 Modo de Subtítulo
2009-02-27 �� 10:57:14
 TV, AV1, AV2, Component1, Component2, PC, HDMI1/DVI, HDMI2, HDMI3, HDMI4, USB
Self Diagnosis
►
Software Upgrade
HD Connection Guide
Contact Samsung
2009-02-27 �� 10:57:14
2009-02-27 �� 10:57:14
►
∂
∫
RETURN R
INFO
∫
π/µ
Forder1
Photo 0001
Photo 0001
None
File 4
File 5
File 6
File 7
File 8
File 9
File 10
File 11
File 12
File 13
2009-02-27 �� 10:57:15
Forder1
File 4
File 9
Photo 0001
Photo 0001
None
File 5
File 6
File 7
File 8
File 10
File 11
File 12
File 13
 View
Velocidad visionado automático : Rápido ►
Música de fondo
: Encendido
I
Salir
2009-02-27 �� 10:57:15
All
00:04:00
Upper Folder
Folder 1
001-001
00:04:01
002-002
003-003
00:04:28
00:04:12
004-004
00:05:39
005-005
00:04:30
006-006
007-007
00:04:30
00:03:54
008-008
00:05:25
2009-02-27 �� 10:57:17
n Mover
E Ingresar
R Regresar
U Mover
E Ingresar
R Regresar
2009-02-27 �� 10:57:17
Dispositivo 1
Anynet+
Cable HDMI 1.3
Dispositivo 3
Anynet+
Dispositivo 2
Anynet+
Cable HDMI 1.3
Cable HDMI 1.3
Dispositivo 4
Anynet+
Cable HDMI 1.3
Para conectar al sistema Home Cinema
TV
Dispositivo 1
Anynet+
Cable HDMI 1.3
Dispositivo 2
Anynet+
Cable HDMI 1.3
Dispositivo 4
Anynet+
Home Cinema
Cable HDMI 1.3
Dispositivo 3
Anynet+
Cable HDMI 1.3
2009-02-27 �� 10:57:18
 Apagado Automático → No / Sí
Anynet+ (HDMI-CEC)
►
Media play (USB)
U Mover
E Ingresar
Anynet+(HDMI-CEC)
:
Encendido
Apagado Automático
:
Sí
U Mover
E Ingresar
R Regresar
R Regresar
2009-02-27 �� 10:57:18
2009-02-27 �� 10:57:18
Deseo iniciar Anynet+.
Deseo salir de Anynet+.
2009-02-27 �� 10:57:19
No hay imagen o sonido.
La imagen rueda verticalmente.
La imagen es demasiado clara o
demasiado oscura.
2009-02-27 �� 10:57:19
2009-02-27 �� 10:57:19
LCD-TV
PDP-TV
LFD
pulgadas
19~22
100 X 100
23~29
200 X 100
30~40
200 X 200
46~55
400 X 400
57~70
800 X 400
80~
1400 X 800
42~50
400 X 400
58~63
600 X 400
70~
800 X 400
80~
1400 X 800
30~39
200 X 200
40~52
400 X 400
55~70
800 X 400
70~
1400 X 800
Cantidad
M4
M6
4
M8
M8
4
M6
4
M8
3
2
1
2009-02-27 �� 10:57:20
Tornillo 1 (M4X 16)
armario
armario
2009-02-27 �� 10:57:21
LN40B540
LN46B540
LN52B540
40 pulgadas
(39.9 pulgadas medidas
diagonalmente)
46 pulgadas
(45.9 pulgadas medidas
diagonalmente)
52 pulgadas
(52 pulgadas medidas
diagonalmente)
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
1920 x 1080 @ 60 Hz
10W x 2
10W x 2
10W x 2
39.3 X 3.1 X 24.6 pulgadas
(998.0 x 78.4 x 625.8 mm)
39.3 X 10.0 X 27.1 pulgadas
(998.0 x 255.0 x 689.0 mm)
44.4 X 3.1 X 28.2 pulgadas
(1127.0 x 77.8 x 717.4 mm)
44.4 X 10.8 X 30.3 pulgadas
(1127.0 x 275.0 x 769.5 mm)
50.0 X 3.1 X 31.7 pulgadas
(1269.0 x 79.9 x 804.1 mm)
50.0 X 12.0 X 33.8 pulgadas
(1269.0 x 305.0 x 859.2 mm)
33.3 Ibs (15.1 kg)
40.1 Ibs (18.2 kg)
43.7 Ibs (19.8 kg)
53.1 Ibs (24.1 kg)
55.6 Ibs (25.2 kg)
63.9 Ibs (29.2 kg)
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
-20˚ ~ 20˚
2009-02-27 �� 10:57:21
¦ Dimensiones
LN40B540
VISTA SUPERIOR
DETALLE DEL PANEL DE TERMINALES 13.2 cm (Al) x 16.7 cm (An)
3.1
39.3
34.9
24.6
19.7
27.1
24.4
10.0
VISTA FRONTAL/VISTA LATERAL
7.9 (200 mm)
7.9 (200 mm)
2009-02-27 �� 10:57:21
LN46B540
VISTA SUPERIOR
DETALLE DEL PANEL DE TERMINALES 13.2 cm (Al) x 16.7 cm (An)
3.1
44.4
40.2
28.2
22.6
30.3
24.4
10.8
VISTA FRONTAL/VISTA LATERAL
15.7 (400 mm)
15.7 (400 mm)
2009-02-27 �� 10:57:21
LN52B540
VISTA SUPERIOR
DETALLE DEL PANEL DE TERMINALES 13.2 cm (Al) x 16.7 cm (An)
3.1
50.0
45.6
31.7
25.7
33.8
24.4
12.0
VISTA FRONTAL/VISTA LATERAL
15.7 (400 mm)
15.7 (400 mm)
2009-02-27 �� 10:57:22