8RG619QE 取扱説明書 R165-QXXZ

8RG619QE 取扱説明書 R165-QXXZ
クオーツ 置時計
Quartz Table Clock
もくじ
ページ
4
⒌ 使用方法 ………………………………………………………………………
4
6
7
1
警告
注意
ります。
禁止
2
警告
注意
3
4
(うら面)
つまみ
①
緩む
②
締まる
5
注意
液もれだ!
−10 ∼50℃
時 間 精 度
使 用 電 池
電 池 寿 命
約1年
6
本書
保証 書
1枚
7
1. IMPORTANT SAFETY INSTRUCTIONS
The following warnings are intended to protect you and other individuals from injury
or damage. Be sure to follow the instructions.
DESCRIPTION OF THE SYMBOLS
CAUTION
WARNING
This symbol indicates the danger
of death or serious injury.
NOT DISASSEMBLE
This symbol indicates a
“prohibited” action.
This symbol indicates the
possibilities of injury or material
damages only.
PREVENTION OF ACCIDENTAL INGESTION OF ACCESSORIES
CAUTION
Keep out of reach from infants all accessories (metal hooks, screws, etc.) and
small-size batteries. If such accessories are swallowed, immediately consult
a doctor for the necessary treatment.
BATTERIES
If the batteries are not used properly, there is the risk of bodily injury or
damage to the clock and its surroundings due to heating.
WARNING
• Do not insert the plus (+) and minus (–) ends of the battery in reverse.
• Do not install a combination of used and new batteries. Do not mix different types of
batteries.
• Use the batteries specified by the manufacturer.
• Remove all worn out batteries as soon as possible.
• Remove the batteries from the clock if the clock will not be used for a long time.
• When changing the batteries, please replace with all new batteries.
• When changing the batteries, please clean the both ends of the batteries and the
terminals (+ and – contact points) of the clock.
ALKALINE BATTERIES
If liquid leaked from a battery permeates the eye, rinse the eye immediately
and consult a doctor for the necessary treatment. There is a risk of losing
CAUTION eyesight. Also, if the liquid adheres to the skin or clothes, rinse with water.
Do not short circuit, disassemble, heat or expose to fire. These actions may result in the
leakage of liquid, heating or explosion.
DO NOT DISASSEMBLE
Do not disassemble or modify since malfunction may result.
NOT DISASSEMBLE
8
THE CAUTION ON HANDLING
WARNING
Clocks are precision instruments. Certain parts, such as glass made
components, are vulnerable to shocks. Avoid dropping or shock. It may
cause malfunction or damage. Risk of injury or materialistic damage is
possible when damaged.
ROPER LOCATIONS FOR USE
Please avoid usage in the following locations as the quality of the mechanism,
case or battery will deteriorate, causing a decrease in clock accuracy and
WARNING
shortened clock and battery life.
• Locations where the temperature exceeds +50°C (for example, extended exposure to
sunlight).
• Locations near heating or other apparatus where hot blasts or flames exist.
• Locations where the temperature is lower than –10°C.
(The quality of plastic components and batteries will deteriorate.)
• Locations where there is heavy dust accumulation. (The clock may cease operation
due to the accumulation of airborne dust on mechanical parts.)
• Locations where a strong magnetic field exists, such as in the proximity of television
sets, office automation equipment, audio apparatus, etc. (Magnetic forces may cause
to clock to accelerate, decelerate or stop.)
• Locations where strong vibrations exist such as in a train, in a vessel or at a
construction work site.
• Locations where there is high humidity such in a bathroom.
• Locations where gas exists such as at the site of a hot spring.
• Locations where large quantities of oil are used. (Oil in the form of mist will adhere to
moving parts, straining or causing the clock to stop.)
• In the case of a plastic clock, if directly attached to flexible PVC, colors may transfer
or stain each other.
2. PROPER CARE AND MAINTENANCE
• If dirty, use a soft cloth to wipe the clock using neutral detergent or soapsuds. Dry with
a dry cloth afterwards.
• Avoid using benzene, paint thinner, alcohol, or aerosol cleaners to clean the case.
9
3. HOW TO USE THE CLOCK
The following figure shows an example of the clock. So, actual design of the clock may differ from
this figure.
3. Insert the batteries into the battery holder.
1. Remove the back cover
(Back view)
Knob
screw down
Time setting knob
screw up
Three AA size dry cell batteries
Turn the knob to the left, and pull the back
cover to your side.
2. Remove the stopper
Warning: If batteries are inserted with their
polarities (+, -) reversed, tha batteries may
leak, generateheat and explode, causing
human and physical damage.
4. Turn the Time setting knob to
adjust the time.
5. Reattach the back cover.
(Front view)
Hour hand
Minute hand
Rotating pendulum
Stopper
Please set up the clock on a flat place certainly.
10
4. BATTERY REPLACEMENT
Remove the batteries as soon as they become run down. Otherwise, the
batteries may leak and damage the clock.
a) Change the batteries once a year.
b) When batteries run down, remove them as soon as possible.
c) Change all batteries at the same time.
5. SPECIFICATIONS
Operating temperature range
Accuracy at room temperature
Battery used
Practical battery life
-10 to +50°C
Loss/gain (monthly rate) is less 20 seconds
Three 1.5V AA-size batteries (JIS, R6P)
Approximately one-year
•Battery life may be shorter than that described in the specification, since they are
supplied at the time of factory shipment.
•Specifications are subject to change without notice.
11
AFTER SALES SERVICE AND SUPPORT
The store where you purchased the clock will provide after sales service
and support for the clock. Please read the clock warranty and the
following items carefully.
● Availability of repair parts
We will continue to carry functional repair parts (electronic circuits,
gear, etc.) for this clock for a period of seven years in the case of wall
and table clocks, and three years in the case of alarm clocks, after
production of discontinued. For the repair of exterior parts (case, dial,
etc.), similar parts may be substituted.
● Repair period
After the free warranty period, the clock can be repaired for a fee
during the period while repair parts are still available. For repairs,
shipping charges to and from the repair shop and other expenses will be
charged to the customer. In some cases, the repair charge may be costly.
So, please consult the store.
● Address changed and the case where the clock was received as a gift
If not possible to have the clock repaired at the store where it was
purchased, due to an address change or if the clock was a gift, please
consult the RHYTHM WATCH CO., LTD. The written warranty
document is necessary for repair within the warranty period.
● The above conditions apply only in Japan.
RHYTHM WATCH CO., LTD.
http://www.rhythm.co.jp
R177-QXEZ
12
(Y1007)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages

Only pages of the document in English were displayed