Ninja BL682 Owner's manual

®
ninjakitchen.com
1 877 646-5288
BL682
OWNER’S GUIDE
GUIDE DU PROPRIÉTAIRE
GUÍA DEL USUARIO
IMPORTANT SAFETY INSTRUCTIONS
For Household Use Only
WHEN USING ELECTRICAL APPLIANCES,
BASIC SAFETY PRECAUTIONS SHOULD
ALWAYS BE FOLLOWED, INCLUDING THE
FOLLOWING:
READ ALL INSTRUCTIONS BEFORE
USING YOUR NUTRI NINJA® | NINJA®
BLENDER SYSTEM WITH AUTO-iQ™
TECHNOLOGY.
POLARIZED PLUG
WARNING: To reduce the risk
of electric shock, this appliance has a
polarized plug (one blade is wider than
the other). This plug will fit into a
polarized outlet only one way. If the
plug does not fit fully into the outlet,
reverse the plug. If it still does not fit,
contact a qualified electrician to install
the proper outlet. DO NOT modify the
plug in any way.
WARNING:
Extension cords are not
recommended for use with this product.
1
1-877-646-5288
WARNING:
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR
INJURY:
1 WARNING: Remove utensils prior to
processing. Failure to remove may cause the
jar to be damaged or to shatter which may
cause personal injury.
2
WARNING: The blade assemblies are
sharp, not locked in place and removable,
handle with care. When handling the blade
assemblies, always hold by the shaft.
Failure to do so will result in a risk of
laceration.
3 WARNING: Stacked Blade Assembly is
sharp and not locked in place. If using the
pour spout, ensure the lid is fully locked
onto the pitcher. If pouring with the lid
removed, carefully remove the Stacked
Blade Assembly first, holding it by the shaft.
Failure to do so will result in a risk of
laceration.
4
WARNING: Chopping Blade Assembly is
sharp and not locked in place. Before
emptying contents carefully remove lid and
Chopping Blade Assembly, holding it by the
shaft. Failure to do so will result in a risk of
laceration.
5
CAUTION: Do not blend hot liquids, doing
so may cause excessive pressure build-up,
resulting in risk of the user being burned.
6
CAUTION: We do not recommend grinding
in any of our Nutri Ninja® Cups.
7
CAUTION: Remove the Pro Extractor
Blades® Assembly from the Nutri Ninja cup
upon completion of blending. Some
ingredients have the potential to expand
after blending resulting in excessive
pressure buildup that can pose a risk of
injury.
21 To reduce risk of injury, never place the blade
assemblies on the base without the pitcher or
Nutri Ninja cup properly attached.
22 DO NOT operate this appliance on or near any
hot surfaces (such as gas or electric burner or in
a heated oven).
23 The use of attachments or accessories
including canning jars, not recommended by the
manufacturer may result in fire, electric shock or
personal injury.
24 DO NOT remove the container from the motor
base while the appliance is in operation.
25 To reduce the risk of injury, NEVER operate the
appliance without the lid in place; DO NOT try
to defeat the interlock mechanism; make sure
that the attachment is properly installed before
operating the appliance.
26 DO NOT expose containers to extreme
temperature changes.
27 DO NOT overfill.
28 DO NOT operate the appliance empty.
29 To reduce the risk of burns, always allow the
appliance to cool before taking off parts and
before cleaning.
30 In the event that the unit overloads, the control
panel lights will flash and the unit will shut down.
Unplug the appliance and let it cool down for
approximately 15 minutes before using again.
31 THIS PRODUCT IS INTENDED FOR
HOUSEHOLD USE ONLY. Do not use this
appliance for anything other than its intended
use. Do not use outdoors.
32 The maximum rating is based on the Stacked
Blade Assembly (pitcher) that drives the greatest
power and other recommended attachments may
draw significantly less power or current.
SAVE THESE
INSTRUCTIONS
www.ninjakitchen.com
2
English
8 To protect against electrical shock, do not
submerge the appliance or allow the power cord
to come into contact with water or any other
liquid.
9 DO NOT allow the appliance to be used by
children. Close attention is necessary when used
near children. This is not a toy.
10 Never leave an appliance unattended when in
use.
11 Appliance accessories are not intended to be
used in the microwave as it may result in damage
to the accessories.
12 Turn the appliance Off and remove the power
cord from the electrical outlet when not in use,
before assembling or disassembling parts and
before cleaning. To unplug, grasp the plug and
pull from the electrical outlet. Never pull from the
power cord.
13 DO NOT abuse the power cord. Never carry
the appliance by the power cord or yank it to
disconnect from electrical outlet; instead grasp
the plug and pull to disconnect.
14 DO NOT operate any appliance with a damaged
cord or plug, or after the appliance malfunctions,
has been dropped or damaged in any manner.
This appliance has no serviceable parts. Return
the appliance to SharkNinja Operating LLC for
examination, repair or adjustment.
15 DO NOT let the power cord hang over the edge of
table or counter or touch hot surfaces such as the
stove.
16 Always use appliance on a dry, level surface.
17 Keep hands, hair, clothing, as well as utensils
out of container while processing to reduce the
risk of severe injury to persons or damage to the
appliance. A scraper may be used but only when
the appliance is not running.
18 Avoid contact with moving parts.
19 DO NOT attempt to sharpen blades.
20 DO NOT use the appliance if blade assemblies
are bent or damaged.
CONSIGNES DE SÉCURITÉ IMPORTANTES
Pour usage domestique seulement
LORS DE L’USAGE D’UN APPAREIL
ÉLECTRIQUE, DES MESURES DE
SÉCURITÉ ÉLÉMENTAIRES DEVRAIENT
TOUJOURS ÊTRE RESPECTÉES, Y
COMPRIS LES MESURES SUIVANTES :
LISEZ TOUTES LES CONSIGNES
AVANT D’UTILISER VOTRE SYSTÈME
MÉLANGEUR NUTRI NINJAMD | NINJAMD
AVEC LA TECHNOLOGIE AUTO-iQMC.
FICHE POLARISÉE
AVERTISSEMENT :
AVERTISSEMENT :
AVERTISSEMENT :
POUR RÉDUIRE LE RISQUE D’INCENDIE,
D’ÉLECTROCUTION ET DE BLESSURES :
1 AVERTISSEMENT : Enlevez les ustensiles
3
1-877-646-5288
3
VEUILLEZ
CONSERVER CES
DIRECTIVES
www.ninjakitchen.com
4
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Para uso doméstico solamente
AL USAR APARATOS ELÉCTRICOS,
SIEMPRE DEBE SEGUIR PRECAUCIONES
BÁSICAS DE SEGURIDAD, INCLUYENDO
LAS SIGUIENTES:
LEA TODAS LAS INSTRUCCIONES ANTES
DE USAR SU NUTRI NINJA® I SISTEMA
DE LICUADORA NINJA® CON AUTO-iQMR
TECHNOLOGY.
ENCHUFE POLARIZADO
5
1-877-646-5288
ADVERTENCIA:
PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGA
ELÉCTRICA O DAÑOS PERSONALES:
CONSERVE ESTAS
INSTRUCCIONES
www.ninjakitchen.com
6
THIS BOOK COVERS MODEL NUMBER:
BL682
TECHNICAL SPECIFICATIONS
Voltage:
120V~, 60Hz.
Power:
1500 Watts
Pitcher Capacity: 72 oz. (9 cups, 2.1 L)
Max Liquid Capacity:
64 oz. (8 cups, 1.9 L)
Bowl Capacity: 64 oz. (8 cups, 1.8 L)
Nutri Ninja®Cup Capacity: 18 oz. (2.25 cups, 530 mL)
24 oz. ( 3 cups, 710 mL)
32 oz. (4 cups, 950 mL)
7
1-877-646-5288
Thank you for
purchasing the
Nutri Ninja® |
Ninja® Blender
System with
Auto-iQ™
Technology.
English
Contents
Getting to Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology������9
Before First Use ��������������������������������������������������������������������������������������������������������11
Assembly and Use of the Pitcher���������������������������������������������������������������������������������12
Assembly and Use of the Food Processor Bowl������������������������������������������������������������14
Assembly and Use of the Nutri Ninja® Cups�����������������������������������������������������������������16
Programs, Speed Settings & Uses ������������������������������������������������������������������������������17
Care & Maintenance��������������������������������������������������������������������������������������������������19
Troubleshooting Guide������������������������������������������������������������������������������������������������20
Replacement Parts�����������������������������������������������������������������������������������������������������20
Warranty & Registration����������������������������������������������������������������������������������������������22
Table des matières
Comprendre votre système mélangeur Nutri NinjaMD | NinjaMD avec la technologie Auto-iQMC���23
Avant la première utilisation ..������������������������������������������������������������������������������������������������25
Assemblage et utilisation du pichet����������������������������������������������������������������������������������������26
Assemblage et utilisation du bol du robot culinaire�����������������������������������������������������������������28
Assemblage et utilisation du gobelet Nutri NinjaMD������������������������������������������������������������������30
Programmes, réglages de vitesse et usages��������������������������������������������������������������������������31
Soins et entretien������������������������������������������������������������������������������������������������������������������33
Guide de dépannage�������������������������������������������������������������������������������������������������������������34
Pièces de remplacement�������������������������������������������������������������������������������������������������������34
Garantie et enregistrement����������������������������������������������������������������������������������������������������36
Índice
Partes de su Nutri Ninja® | Sistema de licuadora Ninja® con Auto-iQMR Technology ��������37
Antes de su Primera Utilización.���������������������������������������������������������������������������������39
Armado y uso de la licuadora �������������������������������������������������������������������������������������40
Armado y uso del tazón para procesar alimentos���������������������������������������������������������42
Armado y uso de las tazas Nutri Ninja®�����������������������������������������������������������������������44
Programas, Ajustes de velocidad y usos����������������������������������������������������������������������46
Cuidado y mantenimiento�������������������������������������������������������������������������������������������48
Guía de diagnóstico de problemas������������������������������������������������������������������������������49
Partes de repuesto�����������������������������������������������������������������������������������������������������49
Garantía y registro������������������������������������������������������������������������������������������������������51
www.ninjakitchen.com
8
Getting To Know Your Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology
a
b
c
d
e
f
h
i
g
j
l
k
m
aJumbo Multi-Serve 32 oz. Nutri
Ninja Cup
bRegular 24 oz. Nutri Ninja Cup
c Small 18 oz. Nutri Ninja Cup
d Pro Extractor Blades® Assembly
e Sip & Seal® Lids (x3)
9
1-877-646-5288
f Food Processor Bowl
g Food Processor Lid
hDough Blade Assembly
iChopping Blade Assembly
jPitcher
kPitcher Lid with Locking Handle
l Stacked Blade Assembly
m Motor Base
n Power Cord (not shown)
Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology Features:
• Ninja Blade Technology
• BPA Free Pitcher, Nutri Ninja Cups, Food Processor Bowl and Lids
• Drip-Free Pour Spout
• Total Crushing® Technology
• LED Control Panel with Timer
• Sturdy, Non-Slip Base
• Smart Lid technology for easy release
• 3 speeds: Low/Dough, Medium, & High
• 5 Auto-iQ settings - Auto-iQ Frozen Drinks/Smoothies, Auto-iQ Food Puree, Nutri Ninja Auto-iQ Blend,
Nutri Ninja Auto-iQ Ultra Blend and Auto-iQ Pulse
• Nutri Ninja Nutrient & Vitamin Extraction*
* Extract a Drink Containing Vitamins & Nutrients From Fruits & Veggies
www.ninjakitchen.com
10
English
The Nutri Ninja® | Ninja® Blender System with Auto-iQ™ Technology is a professional, high powered innovative tool with
a sleek design and outstanding performance, a true asset to any kitchen. The Nutri Ninja | Ninja Blender System with
Auto-iQ Technology features intelligent programs that combine unique pulsing, blending and pausing patterns that do the
work for you! Get great results every time with no guesswork required! For best results, be sure to carefully read all the
instructions contained in the manual before using this appliance.
Before First Use
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
IMPORTANT: Make sure that the motor base
is plugged in for use.
IMPORTANT: Never add ingredients into the
container before placing the Blade Assembly
in first.
IMPORTANT: Blade Assemblies are not
interchangeable.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
WARNING: Stacked
Blade Assembly is
sharp and not locked in
place. If using the pour
spout, ensure the lid
is fully locked onto the
pitcher. Failure to do so
will result in a risk of
laceration.
WARNING: Stacked
Blade Assembly is sharp
and not locked in place.
If pouring with the lid
removed, carefully
remove the Stacked
Blade Assembly first,
holding it by the shaft. Failure to do so
will result in a risk of laceration.
WARNING: Chopping
Blade Assembly is sharp and
not locked in place. Before
emptying contents carefully
remove lid and Chopping
Blade Assembly, holding it by
the shaft. Failure to do so will result in a
risk of laceration.
CAUTION: Do not immerse the motor base into
water or any other liquid.
1 Remove all packaging material and labels from the
appliance. Separate/remove all parts from each other.
2 Wash the lids, pitcher, food processor bowl, Nutri
Ninja® cups and Blade Assemblies in warm, soapy
water. When washing the blade assemblies, use a
dish-washing utensil with a handle to avoid direct hand
contact with blades.
CAUTION: Handle the Blade Assemblies with care
when washing, as the blades are very sharp.
3 Handle blade assemblies with care to avoid contact
with sharp edges. Rinse and air dry thoroughly.
4 The pitcher, food processor bowl, Nutri Ninja® cups,
lids, and Blade Assemblies, are all dishwasher safe.
It is recommended that the lids and blade assemblies
be placed on the top rack. Ensure that the blade
assemblies are removed from the containers before
placing in the dishwasher.
5 Wipe the motor base clean with a damp cloth.
11
1-877-646-5288
WARNING: Handle the Stacked Blade Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the pitcher to be damaged or
to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 3a
OR
Fig. 1
Fig. 2
AUTO
Fig. 3b
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
Fig. 4
Fig. 5a
AUTO
It’s best to add the liquid ingredients first and then the dry ingredients.
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the Suction Cups adhere to the
counter or table top.
3 Align and lower the Pitcher onto the motor base.
(Fig. 1) Handle should be aligned slightly to the right of
the “LOCK” symbol on the motor base.
4 Rotate the pitcher clockwise until it clicks in place. As
the pitcher rotates, it will lower and the safety tabs on
the bottom of the pitcher will slide under the safety tabs
on the top of the motor base. (Fig. 2)
5 The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
6 Holding the Stacked Blade Assembly by the top of the
shaft, place it onto the drive gear inside the pitcher.
Ensure that the Stacked Blade Assembly is seated
properly and is standing upright. (Fig. 4)
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
MED
LOW /
DOUGH
MED
7 Add the ingredients to the pitcher, making sure that
they do not exceed the highest measured marking line
on the side of the pitcher.
NOTE: If you need to add additional ingredients while
the appliance is processing, open the pour spout cap
and pour the ingredients in through the opening.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
“MAX” liquid mark (1.9 L) on the Pitcher.
8 Holding the lid by the handle in the upright position,
place it on top of the Pitcher aligning the triangle
( ) located on the lid with the triangle ( ) located on
the Pitcher’s handle. (Fig. 5a) Press the handle down
until you hear a click. The triangles on the lid and
the blender handle MUST be aligned in order for the
blender to turn on. (Fig. 5b)
IMPORTANT: As a safety feature, the power light
( ) will flash and the motor will not work if the
Pitcher and lid are not installed correctly. When
the Pitcher and lid are installed properly, the
power light ( ) will be solid, indicating that the
appliance is ready for use.
9 Plug the power cord into the electrical outlet and press
the power button ( ).
www.ninjakitchen.com
12
English
Assembly and Use of the Pitcher
Assembly and Use of the Pitcher - cont.
USE
REMOVAL
Fig. 6
Fig. 10
Fig. 9
Fig. 7
Fig. 8
10 Review warning and caution statements on page 12
before proceeding.
NOTE: Nutri Ninja | Ninja Blender with Auto-iQ
Technology can sense which jar is on the motor base.
The available function lights will illuminate depending
on which jar is placed on the motor base. (Fig. 6)
®
®
™
11 Press the power button to turn on the unit. Select
the speed or Auto-iQ program that best suits your
needs. The Auto-iQ program will stop the appliance
automatically at the end of the program. (Fig. 7)
NOTE: Pulse ingredients for even chopping by holding
the Auto-iQ Pulse button until your desired consistency
is reached.
12 To pause the appliance, press the selected speed or
Auto-iQ program a second time. When the program is
paused, the light on the program button will flash until
you press it again to resume the rest of the program.
13 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 8)
14 Turn the pitcher counter clockwise to remove and then
lift off the base. (Fig. 9)
13
Fig. 11
1-877-646-5288
WARNING: Never insert your hands in the pitcher
as the Stacked Blade Assembly is sharp. Always
use a spatula to dislodge food that has stuck to
the sides of the pitcher.
15 Open the pour spout cap and use the spout to empty
liquid contents.
16 For thicker consistencies, first remove the lid by
pressing the release button and pulling the lid handle
up to a 90 degree angle to lift lid off the pitcher. Then,
carefully remove the Stacked Blade Assembly by the
top of the shaft. Place Stacked Blade Assembly away
from the work area to avoid accidental contact. Finally,
empty contents from the pitcher. (Fig. 10)
17 Make sure that the unit is unplugged when not in use.
18 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 11)
WARNING: Chopping Blade Assembly is sharp and not locked in place. Before emptying contents carefully
remove lid and Chopping Blade Assembly, holding it by the shaft. Failure to do will result in risk of
laceration.
WARNING: Remove utensils prior to processing. Failure to remove may cause the bowl to be damaged or to
shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the lid from the bowl upon completion of processing. Some ingredients have the potential
to expand after blending resulting in excessive pressure buildup that can pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 4a
OR
Fig. 6b
LOW /
DOUGH
AUTO
Fig. 2
Fig. 3
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
AUTO
MED
Fig. 4b
MED
HIGH
PULSE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
LOW /
DOUGH
Fig. 6a
PUREE
NOTE: Nutri Ninja® | Ninja® Blender System with AutoiQ™ Technology can sense which jar is on the motor
base. The function lights will illuminate depending on
which jar is placed on the motor base. (Fig. 1)
LOW /
DOUGH
Fig. 5
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
MED
MED
3 Align and lower the Processor Bowl onto the motor
base. (Fig. 2) Handle should be aligned slightly to the
right of the “LOCK” symbol on the motor base.
7 Add the ingredients to the bowl, making sure that they
do not exceed the highest measured marking line on
the side of the bowl.
8 Holding the lid by the handle in the upright position,
place it on top of the Processor Bowl aligning the
triangle ( ) located on the lid with the triangle ( )
located on the Processor Bowl handle. (Fig. 6a) Press
the handle down until you hear a click. The triangles on
the lid and the Processor Bowl handle MUST be aligned
in order for the blender to turn on. (Fig. 6b)
NOTE: The 64 oz. bowl is not intended for blending
drinks. Do not overfill.
4 Rotate the bowl clockwise until it locks in place, you will
hear a click when the lock is engaged. (Fig. 3)
9 Plug the power cord into the electrical outlet and press
the power button ( ).
5 The bowl can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 4a, Fig. 4b)
6 Holding the desired blade assembly by the top of the
shaft, place it onto the drive gear inside the bowl.
Ensure that the blade assembly is seated properly and
is standing upright. (Fig. 5)
NOTE: As a safety feature, the power button ( ) will
flash and the motor will not work if the bowl and lid
are not installed correctly. When the bowl and lid
are installed properly, the power button ( ) will be
solid, indicating that the appliance is ready for use.
NOTE: The blade will fit loosely on the drive gear.
www.ninjakitchen.com
14
English
Assembly and Use of the Food Processor Bowl
Assembly and Use of the Processor Bowl - cont.
USE
CHOPPING BLADE
ASSEMBLY
Fig. 1
REMOVAL
Fig. 2
Fig. 3
USING THE CHOPPING BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Chopping Blade Assembly by the shaft,
place it onto the gear shaft inside the bowl. Ensure that
the Chopping Blade Assembly fits around the gear shaft
and that it is standing straight. (Fig. 1)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6 Plug the power cord into the electrical outlet and press
on the power button ( ). Select the speed or Auto-iQ™
program that best suits your needs. Pulse ingredients
for even chopping by holding the Auto-iQ Pulse button
until your desired consistency is reached.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the blade to stop turning. (Fig. 2)
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
15
1-877-646-5288
USE
DOUGH BLADE
ASSEMBLY
Fig. 4
Fig. 5
USING THE DOUGH BLADE ASSEMBLY
1 Review warning and caution statements on page 14
before proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such
as a counter or table top. Press down on the motor
base to make sure that the suction cups adhere to the
counter or table top.
3 Secure the bowl onto the motor base.
4 Holding the Dough Blade Assembly by the shaft, place
it onto the gear shaft inside the bowl. Ensure that the
Dough Blade Assembly fits around the gear shaft and
that it is standing straight. (Fig. 5)
5 Add the ingredients and secure the bowl lid onto the
bowl.
6 Plug the power cord into the electrical outlet and press
on the power button ( ). Select the LOW/DOUGH
button and process until ingredients come together to
form a mass.
NOTE: Please refer to “Speed Settings & Uses” chart
for suggested uses and speeds.
7 Once finished making dough, stop the appliance by
pressing the power button ( ) and wait for the blade to
stop turning.
8 To remove the lid, press the release button on the lid
and pull the lid handle up to a 90° angle. (Fig. 2)
9 Turn the bowl counter-clockwise and lift it to remove it
from the motor base. (Fig. 3)
10 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor
base and gently pull the unit up and towards you.
(Fig. 4)
WARNING: Handle the Pro Extractor Blades® Assembly with care, as the blades are sharp.
WARNING: Remove utensils prior to processing. Failure to remove may cause the Nutri Ninja cup to be
damaged or to shatter, which may cause personal injury.
WARNING: Never leave the appliance unattended while in use.
CAUTION: Do not blend hot liquids, doing so may cause excessive pressure buildup, resulting in risk of the
user being burned.
CAUTION: Remove the Pro Extractor Blades Assembly from the cup upon completion of blending. Some
ingredients have the potential to expand after blending resulting in excessive pressure buildup that can
pose a risk of injury.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
USE
REMOVAL
Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
NOTE: Nutri Ninja | Ninja Blender with Auto-iQ Technology
can sense which jar is on the motor base. The available
function lights will illuminate depending on which jar is placed
on the motor base. (Fig. 1)
7 To pause the appliance, press the selected speed or Auto-iQ
program a second time. When the program is paused, the
light on the program button will flash until you press it again
to resume the rest of the program.
1 Review warning and caution statements above before
proceeding to number 2.
2 Place the motor base on a clean, dry, level surface such as a
counter or table top. Press down on the motor base to make
sure that the suction cups adhere to the counter or table top.
8 Once you have reached your desired consistency, stop the
appliance by pressing the power button and wait for the blade
to stop turning. Turn the Nutri Ninja cup counter-clockwise
and pull straight up to remove. (Fig. 5, Fig. 6)
®
®
™
3 Add ingredients to the Nutri Ninja cup.
NOTE: Do not overfill! To avoid spilling, do not add ingredients
past the “Max Liquid” line.
4 Place the Pro Extractor Blades® onto the cup and tightly
screw it on clockwise until you have a good seal. (Fig. 2)
9 Turn the cup upright and remove the Pro Extractor Blades by
twisting the Pro Extractor Blades counter clockwise.
5 Turn the Nutri Ninja cup upside down and place it onto the
motor base, aligning the tabs on the cup with the motor base.
Rotate the Nutri Ninja cup clockwise until it locks in place, you
will hear a click when the lock is engaged. (Fig. 3)
10 Place the Sip & Seal® lid onto the Nutri Ninja cup, twist to seal
and enjoy!
6 Press the power button on, and select the speed or Auto-iQ
program that suits your needs. (Fig. 4) The Auto-iQ program
will stop the appliance automatically at the end of the
program.
11 Make sure that the motor base is unplugged when not in use.
12 To release the motor base from the
counter or table top, place your hands
underneath both sides of the motor
base and gently pull the unit up and
towards you.
www.ninjakitchen.com
16
English
Assembly and Use of the Nutri Ninja® Cups
Programs, Speed Settings & Uses for the Pitcher
FUNCTION
CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Frozen Drinks /
Ice Crush
Pitcher
Stacked Blade
Assembly
Auto-iQ™ Frozen Drinks/
Smoothies
Ice
Frozen Drinks
Smoothies
Pureeing
Pitcher
Stacked Blade
Assembly
Auto-iQ Food Puree
Smoothies
Soups*
Milkshakes
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja® containers
are not intended for hot blending.
Programs, Speed Settings & Uses for the Food Processor Bowl
FUNCTION
CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Mincing
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Onion
Garlic
Herbs
Kneading and
Dough Mixing
Food Processor
Bowl
Dough Blade
Assembly
Low/Dough
Bread Dough
Pie Dough
Pizza Dough
Pretzel Dough
Cookie Dough
Processing
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Food Puree
Low/Dough
Medium
High
Pâtés
Stewed Fruits
Dips
Apple Sauce
Spreads
Baby Food
Emulsifying
Food Processor
Bowl
Chopping
Blade
Assembly
Low/Dough
Medium
Salad Dressings
Sauces*
Grinding
Food Processor
Bowl
Chopping
Blade
Assembly
Medium
Meat
Grating
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping
Food Processor
Bowl
Chopping
Blade
Assembly
Auto-iQ Pulse
Salsa
Vegetables
Nuts
Batters
Food Processor
Bowl
Dough Blade
Assembly
Low/Dough
Cake Mixes
Batters
* When blending soups or sauces, make sure they’re cooled to room temperature first - Ninja containers
are not intended for hot blending.
17
1-877-646-5288
English
Programs, Speed Settings & Uses for the Nutri Ninja® Cup
FUNCTION
CONTAINER
BLADE
TYPE
SPEED or
PROGRAM
TYPE OF FOOD
Smoothies
Nutri Ninja Cup
Pro Extractor
Blades™
Assembly
Nutri Ninja Auto-iQ™
Blend
Smoothies
Frappes
Milkshakes
Protein Drinks
®
Green Smoothies
Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Nutri Ninja Auto-iQ Ultra
Blend
Frozen Fruits
Frozen Vegetables
Kale
Celery
Spinach
Seeds
Ice
Grating
Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Grated Cheese
Bread Crumbs
Spices
Chopping
Nutri Ninja Cup
Pro Extractor
Blades
Assembly
Auto-iQ Pulse
High
Salsa
Vegetables
Nuts
www.ninjakitchen.com
18
HOW TO CLEAN
CAUTION: Make sure that the motor base is
unplugged from the power source before inserting
or removing any blade assembly and before
cleaning.
CAUTION: DO NOT immerse the motor base into
water or any other liquid.
1 Separate/remove all parts from each other.
2 Hand Washing: Wash the lids, pitcher, food processor
bowl, Nutri Ninja cup, and blade assemblies in warm,
soapy water. When washing the blade assemblies, use
a dish-washing utensil with a handle to avoid direct
hand contact with blades. Handle blade assemblies
with care to avoid contact with sharp edges. Rinse and
air dry thoroughly.
Dishwasher: The containers, lids, blade assemblies
and attachments are all dishwasher safe. The lids
and blade assemblies are top rack dishwasher safe.
Ensure that the blade assemblies are removed from the
containers before placing in the dishwasher.
WARNING: Handle the Blade Assemblies with
care when washing, as the blades are sharp.
Contact with the blades’ edges can result in
laceration.
3 Wipe the motor base clean with a damp cloth.
Please call customer service if any servicing needs to be
performed on the appliance at 1-877-646-5288.
19
1-877-646-5288
HOW TO STORE
1 Store the Nutri Ninja® | Ninja® Blender System with
Auto-iQ™ Technology upright with the blade assembly
inside the corresponding container with the lid secured
on top. Do not place anything on top. Store the rest of
the attachments in a safe place where they will not be
damaged and won’t cause harm. Wrap the power cord
around the cord wrap on the back of the motor base.
RESETTING THE MOTOR THERMOSTAT
The Nutri Ninja | Ninja Blender System with Auto-iQ
Technology features a unique safety system which
prevents damage to the unit’s motor and drive system
should you inadvertently overload your appliance. If
the appliance is being overloaded, the motor
will stop. Allow the appliance to cool for
approximately 15 minutes. To reset the appliance,
follow the resetting procedure below:
1 Unplug the appliance from the electrical outlet.
2 Remove and empty the container and ensure that no
food is jamming the Blade Assembly or attachments.
3 Allow the appliance to cool for approximately 15
minutes.
4 Re-install the container onto the base and re-plug the
appliance into the electrical outlet.
5 Proceed to use the appliance as before making sure not
to exceed the recommended maximum capacities.
PROBLEMS
English
Troubleshooting Guide
POSSIBLE REASONS & SOLUTIONS
Make sure the container is securely placed on motor base.
Make sure the lid is securely on container in the correct position (align
arrows).
The appliance is turned “Off”. Press the power button ( ) to turn “On”.
Motor Doesn’t Start or Blade
Assembly Doesn’t Rotate.
Check that the plug is securely inserted into the electrical outlet.
Check the fuse or circuit breaker.
The unit has overloaded. The appliance will stop and the power light will
flash. Unplug and wait approximately 15 minutes before using again.
The unit has overheated. Unplug and wait approximately 15 minutes before
using again.
Check to make sure the unit is not overloaded.
Food is Unevenly Chopped.
Either you are chopping too much food at one time, or the pieces are not of
even size and processing smaller amounts per batch.
Food is Chopped Too Fine or is
Too Watery.
The food has been over processed. Use Auto-iQ™ Pulse button for
controlled processing.
Food Collects On Lid or On the
Sides of the Container.
The mixture is too thick. Add more liquid.
You Cannot Achieve Snow
From Solid Ice.
Motor Base Won’t Stick to
Counter or Table Top.
Do not use ice that has been sitting out or has started to melt. Use ice
straight from the freezer.
Start with a few pulses and then go to a continuous blending cycle.
Make sure surface and suction feet are wiped clean. Suction feet will only
stick to smooth surfaces. Suction feet WILL NOT stick on some surfaces
such as, wood, tile and non-polished finishes.
DO NOT attempt to use appliance when the motor base is stuck to a
surface that is not secure, (cutting board, platter, plates, etc.).
You get an “Err” Message
Your Ninja is able to detect which jar is on the base. You may be trying
to use a program that is not designed for the jar you have installed. The
programs will light up indicating which programs are available for each jar.
You have a blinking red light
The unit is not installed properly. For your safety the unit will only be able to
be turned on when it is properly assembled. Please refer to the assembly
pages of this inspiration guide for assistance.
Replacement Parts
ORDERING REPLACEMENT PARTS
To order additional parts and attachments, please visit our website: www.ninjakitchen.com
or feel free to contact customer service: 1-877-646-5288.
www.ninjakitchen.com
20
Notes
21
1-877-646-5288
English
ONE (1) YEAR LIMITED WARRANTY
SharkNinja Operating LLC warrants this product to be free from material defects and workmanship for a period of one (1)
year from the date of purchase when utilized for normal household use, subject to the following conditions, exclusions and
exceptions.
The liability of SharkNinja Operating LLC is limited solely to the cost of the repair or replacement of the unit at our option.
This Limited Warranty does not cover normal wear of parts and does not apply to any unit that has been tampered with or
used for commercial purposes. This Limited Warranty does not cover damage caused by misuse, abuse, negligent handling or
damage due to faulty packaging or mishandling in transit. This Limited Warranty does not cover damage or defects caused by
or resulting from damages from shipping or repairs, service or alteration to the product or any of its parts, which have been
performed by a repair person not authorized by SharkNinja Operating LLC.
If your appliance fails to operate properly while in use under normal household conditions within the Limited Warranty period,
you may return the complete appliance and accessories with proof of purchase and date, freight prepaid. For Customer Service
support, call 1-877-646-5288 or visit our website www.ninjakitchen.com.
If the appliance is found by SharkNinja Operating LLC to be defective, in SharkNinja Operating LLC’s sole discretion, we
will repair or replace it free of charge. Proof of purchase date and a check made payable to SharkNinja Operating LLC in the
amount of $19.95 to cover the cost of return shipping and handling must be included.*
This Limited Warranty is extended to the original purchaser of the unit and excludes all other legal, implied and/or conventional
warranties. The responsibility of SharkNinja Operating LLC if any, is limited to the specific obligations expressly assumed
by it under the terms of this Limited Warranty. In no event is SharkNinja Operating LLC liable for incidental or consequential
damages to anyone of any nature whatsoever. Some states do not permit the exclusion or limitation of incidental or
consequential damages, so the above may not apply to you.
This Limited Warranty gives you specific legal rights, and you may also have other rights which vary from state to state or from
province to province.
*IMPORTANT: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase date and
to attach tag to item before packing with your name, complete address and phone number with a note giving
purchase information, model number and what you believe is the problem with the item. We recommend you insure
the package (as damage in shipping is not covered by your Limited Warranty). Mark the outside of your package
“ATTENTION CUSTOMER SERVICE”.
PRODUCT REGISTRATION
Please visit www.ninjakitchen.com or call 1-877-646-5288 to register your new Ninja® product within ten (10) days of
purchase. You will be asked to provide the store name, date of purchase and model number along with your name and address.
The registration will enable us to contact you in the unlikely event of a product safety notification. By registering you
acknowledge to have read and understood the instructions for use, and warnings set forth in the accompanying instructions.
www.ninjakitchen.com
22
c
d
e
f
h
i
g
j
l
k
m
23
1-877-646-5288
www.ninjakitchen.com
24
1
2
3
4
5
25
1-877-646-5288
MONTAGE
Fig. 3a
OU
Fig. 5b
Fig. 1
Fig. 2
AUTO
Fig. 3b
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW
HIGH
PULSE
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW
MED
LOW
HIGH
PULSE
AUTO
Fig. 4
PULSE
DOUGH
PUREE
FROZEN
BLENDING
Fig. 5a
SINGLE
SERVE
AUTO
HIGH
SMOOTHIE
MED
www.ninjakitchen.com
26
DÉMONTAGE
Fig. 6
Fig. 10
Fig. 9
Fig. 7
Fig. 8
27
1-877-646-5288
ASSEMBLAGE
Fig. 1
Fig. 4a
OU
Fig. 6b
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
AUTO
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
HIGH
PULSE
PUREE
LOW /
DOUGH
AUTO
MED
FROZEN DRINKS
SMOOTHIES
MED
HIGH
PULSE
AUTO
AUTO
www.ninjakitchen.com
28
DÉMONTAGE
JEU DE LAMES
À HACHER
Fig. 1
Fig. 2
UTILISATION DU JEU DE LAMES DE HACHAGE
1-877-646-5288
Fig. 3
UTILISATION
JEU DE LAMES
À PÉTRIR
Fig. 4
Fig. 5
UTILISATION DU JEU DE LAMES À PÉTRIR
ASSEMBLAGE
UTILISATION
DÉMONTAGE
Fig. 1
AUTO
Fig. 2
Fig. 3
30
RÉCIPIENT
TYPE DE
LAME
VITESSE ou
PROGRAMME
TYPE
D’ALIMENTS
Auto-iQMC Frozen Drinks/
Smoothies
Auto-iQ Food Puree
RÉCIPIENT
TYPE DE
LAME
VITESSE ou
PROGRAMME
TYPE
D’ALIMENTS
Hachage fin
Bol du robot
culinaire
Auto-iQ Pulse
Oignon
Ail
Fines herbes
Low/Dough (basse/Pâte)
Bol du robot
culinaire
Transformation
Auto-iQ Food Puree
Low/Dough (basse/pétrir)
Medium (moyen)
High (haute)
Bol du robot
culinaire
Low/Dough (basse/pétrir)
Medium (moyen)
Broyage
Bol du robot
culinaire
Medium (moyen)
Viande
Râpage
Auto-iQ Pulse
High (haute)
Hachage
Bol du robot
culinaire
Auto-iQ Pulse
Bol du robot
culinaire
Low/Dough (basse/pâte)
1-877-646-5288
TYPE DE
LAME
VITESSE ou
PROGRAMME
TYPE
D’ALIMENTS
Gobelet Nutri
Ninja
Nutri Ninja Auto-iQMC
Blend
Gobelet Nutri
Ninja
Nutri Ninja Auto-iQ Ultra
Blend
Râpage
Gobelet Nutri
Ninja
Auto-iQ Pulse
High (haute)
Hachage
Gobelet Nutri
Ninja
Auto-iQ Pulse
High (haute)
www.ninjakitchen.com
32
FONCTION
33
1-877-646-5288
COMMENT RANGER
RÉINITIALISER LE THERMOSTAT DU MOTEUR
www.ninjakitchen.com
34
Notes
35
1-877-646-5288
36
c
d
e
f
h
i
g
j
l
k
m
37
1-877-646-5288
www.ninjakitchen.com
38
39
1-877-646-5288
ARMADO
Fig. 3a
o
Fig. 1
Fig. 2
AUTO
Fig. 3b
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
Fig. 4
Fig. 5a
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
40
Fig. 6
Fig. 10
Fig. 9
Fig. 7
Fig. 8
Fig. 11
1-877-646-5288
ARMADO
Fig. 1
Fig. 4a
O
Fig. 6b
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
Fig. 2
Fig. 3
AUTO
MED
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
HIGH
PULSE
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
AUTO
FROZEN DRINKS
SMOOTHIES
AUTO
PUREE
LOW /
DOUGH
MED
HIGH
PULSE
AUTO
MED
HIGH
AUTO
Fig. 4b
PULSE
AUTO
Fig. 5
AUTO
PULSE
Fig. 6a
www.ninjakitchen.com
42
LA CUCHILLA
PARA PICAR
Fig. 1
Fig. 2
Fig. 3
USO DE LA CUCHILLA PARA PICAR
1-877-646-5288
Fig. 4
USO
ACCESORIO PARA
AMASAR
Fig. 5
USO DEL ACCESORIO PARA AMASAR
ARMADO
USO
Fig. 1
AUTO
Fig. 2
Fig. 3
Fig. 4
®
Fig. 5
Fig. 6
www.ninjakitchen.com
44
RECIPIENTE
TIPO DE
CUCHILLA
VELOCIDAD o
PROGRAMA
TIPO DE
ALIMENTO
Auto-iQMR Frozen Drinks/
Smoothies
Auto-iQ Food Puree
Batidos
Sopas*
Malteadas
RECIPIENTE
TIPO DE
CUCHILLA
VELOCIDAD o
PROGRAMA
TIPO DE
ALIMENTO
Picado
Cuchilla para
picar
Auto-iQ Pulse
Low/Dough (Baja/masa)
Masa para pan
Masa para torta
Masa para pizza
Maza para pretzel
Masa para galletitas
Paté
Frutas para compota
Mezclas para mojar
Puré de manzana
Cremas para untar
Comida para bebé
Amasar y
mezclar masa
Procesado
Cuchilla para
picar
Auto-iQ Food Puree
Low/Dough (Baja/masa)
Medium (Mediana)
High (Alta)
Emulsionar
Cuchilla para
picar
Low/Dough (Baja/masa)
Medium (Mediana)
Moler
Cuchilla para
picar
Medium (Mediana)
Carne
Rallar
Cuchilla para
picar
Auto-iQ Pulse
High (Alta)
Cuchilla para
picar
Auto-iQMR Pulse
Salsa
Verduras
Fruta seca
Low/Dough (Baja/masa)
1-877-646-5288
Batidos
RECIPIENTE
TIPO DE
CUCHILLA
VELOCIDAD o
PROGRAMA
TIPO DE
ALIMENTO
Taza Nutri Ninja
Nutri Ninja Auto-iQMR
Blend
Taza Nutri Ninja
Nutri Ninja Auto-iQ Ultra
Blend
Rallar
Taza Nutri Ninja
Auto-iQ Pulse
High (Alta)
Taza Nutri Ninja
Auto-iQ Pulse
High (Alta)
www.ninjakitchen.com
46
Batidos de
verduras
ALMACENAMIENTO
47
1-877-646-5288
PARA REINICIAR EL TERMOSTATO DEL
MOTOR
POSIBLE CAUSA Y SOLUCIÓN
Aparece un mensaje “Err”
Aparece una luz roja
parpadeando
www.ninjakitchen.com
48
Notas
49
1-877-646-5288
www.ninjakitchen.com
50
SharkNinja Operating LLC
US: Newton, MA 02459
CAN: Ville St-Laurent, QC H4S 1A7
1-877-646-5288
www.ninjakitchen.com
Copyright / Droit d’auteur / Derechos reservados © SharkNinja Operating LLC 2016
Ninja, Nutri Ninja and Sip & Seal are registered trademarks of SharkNinja Operating LLC.
Auto-iQ, Total Crushing and Pro Extractor Blades are trademarks of SharkNinja Operating LLC.
Ninja, Nutri Ninja et Sip & Seal sont des marques déposées de SharkNinja Operating LLC.
Auto-iQ, Total Crushing et Pro Extractor Blades sont des marque commerciale de SharkNinja Operating LLC.
Ninja, Nutri Ninja y Sip & Seal son marcas registradas de SharkNinja Operating LLC.
Auto-iQ, Total Crushing y Pro Extractor Blades son marcas comerciales de SharkNinja Operating LLC.
For SharkNinja U.S. Patent information visit sharkninja.com/USPatents.
Pour des renseignements sur les brevets de SharkNinja aux É.-U., veuillez visiter sharkninja.com/USPatents.
Para obtener información acerca de las patentes en EE.UU. de SharkNinja, visite http://www.sharkninja.com/USPatents.
Illustrations may differ from actual product. We are constantly striving to improve our products, therefore the
specifications contained herein are subject to change without notice.
Les illustrations peuvent être différentes des produits réels. Nous nous efforçons sans cesse d’améliorer nos
produits et, de ce fait, les spécifications décrites dans ce guide sont sujettes à des changements sans préavis.
El dibujo puede no ser igual al producto real. Nosotros nos esforzamos constantemente en mejorar nuestros
productos, por lo tanto las especificaciones aquí indicadas pueden cambiar sin previo aviso.
Printed in China / Imprimé en Chine / Impreso en China
BL682_30_160129.3