Welcome Guide Bluetooth Folio Keyboard Case for iPad Air 2 Package Contents ■ ■ ■ Bluetooth Folio Keyboard Case for iPad Air 2 USB charging cable Welcome Guide Features Notebook design resembles a laptop and fully complements your iPad Air 2. ■ Premium synthetic leather exterior and microfiber inner deliver a unique touch experience. ■ iPad snaps to a built-in magnetic viewing angle designed for typing and media playback, or lies flat over the keys for handheld use. ■ Once paired via Bluetooth, iPad connects to the keyboard automatically when locked into position on the embedded magnetic strip. ■ Magnetic cover keep your folio case securely closed. ■ Opening and closing the case automatically triggers your iPad’s sleep or wake modes and turns the keyboard on and off. ■ Rechargeable high capacity lithium battery lasts for over 6 months between charges (based on 2 hours of use per day). ■ Molded key caps deliver whisper-quiet and comfortable typing. ■ 1 Product Overview 1. Back to Home 7. Keyboard Display 2. Screen Lock / Unlock 8. Previous Song 3. Brightness Down 9. Play/Pause ( 10. Next Song for the UK keyboard) 4. Brightness Up 11. Mute ( 12. Volume Down for the UK keyboard) 5. Search 13. Volume Up 6. Switch Input Language 14. Bluetooth Pairing 2 19. Magnet 20. Caps Lock / Bluetooth Indicator 21. Power Indicator 15. Cut 16. Copy 17. Paste 18. Select All Special Symbols (€, £, #) for UK Input € + £ # + + 3 Technical Specifications Bluetooth Specification Bluetooth 3.0 Product Dimensions 252 × 180 × 18mm / 9.9 × 7.1 × 0.7in Product Weight 390g / 13.8oz Operating Range Up to 10m / 33ft Standby Time 300 days Charge Time 2.5 hours Uninterrupted Work Time 300 hours Working Temperature -10 ~ +55℃ Lithium Battery Capacity 800mAh Battery’s Lifespan 400 charge cycles Key Life 5 million clicks 4 Mount Your Device 1. Once installed in the case, release the bottom half of your iPad from the lower edge bracket while keeping the top half installed in the corner brackets. 2. Lock the lower edge of the iPad into position on the magnetic strip to create an upright viewing angle. The green Power indicator will go on for 2 seconds. Pairing Instructions 1. Simultaneously press the Fn and Bluetooth keys to enter pairing mode. The blue Bluetooth indicator will start to flash. 2. Activate your device’s Bluetooth function and search for the keyboard case. 3. Once the Bluetooth keyboard case has been found, click on its name to connect. 4. Enter the password code as displayed on the screen. 5. Once the Bluetooth keyboard case has successfully connected to your device, the Bluetooth indicator will turn off. 5 After pairing for the first time, your device will connect to the keyboard automatically when locked into position on the embedded magnetic strip. Note: In case of connection failure, delete the pairing record from your device, and repeat the procedures above. Power Saving Mode The keyboard case will enter sleep mode after being idle for 15 minutes. To activate it, press any key and wait for 2 seconds. Charging Instructions When battery power is low, the Power indicator will turn red and begin to blink, indicating that it is time to recharge the keyboard case. 1. Connect the Bluetooth keyboard to a computer or USB adapter using the Micro USB charging cable. The power indicator will show a solid light while the keyboard is charging. 2. Once it is fully charged, the power indicator will turn green. 6 Usage Tips ■ ■ ■ ■ ■ Do not place heavy objects on the keyboard case. Do not drop the product, bump it against hard surfaces, or dismantle it. Keep the product away from oil, chemicals, and liquids. Clean the keyboard by lightly wiping it with a slightly damp cloth. Dispose of batteries according to local laws. FCC Statement : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. 7 This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ■ Reorient or relocate the receiving antenna. ■ Increase the separation between the equipment and receiver. ■ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ■ Consult the dealer or an experienced radio/TV technician for help. RF Warning Statement: The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 8 Warranty Our company provides customers with a warranty of 18 MONTHS from the date of purchase. Contact Us For any inquiries or comments concerning our products, please send an email to [email protected], and we will respond to you as soon as possible. If there is any quality-related issue with the product, you may request a REPLACEMENT OR REFUND by submitting a request form at www.ianker.com/support. Statement We’re only able to provide after-sales service for purchases made directly from Anker. If you purchased through a different retailer, please contact them for any exchange or refund requests. ■ Please note that unauthorized reselling of Anker products is prohibited. ■ 9 10 11 Technical Specifications Bluetooth Spezifikation Bluetooth 3.0 252 × 180 × 18 mm 390g 300 Tage Betriebstemperatur -10 bis +55℃ 800mAh 400 Ladezyklen 5 Millionen Klicks 13 15 16 17 18 1-800-988-7973 (U.S.) Mon-Fri 9:00-5:00 (PST) 069-9579-7960 (DE) Mon-Fri 6:00-11:00 www.ianker.com [email protected]
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
© 2021