Zanussi ZBT23420SR User manual

Add to My manuals
72 Pages

advertisement

Zanussi ZBT23420SR User manual | Manualzz
User manual
Notice d'utilisation
Benutzerinformation
Istruzioni per l’uso
Manual de instrucciones
Fridge-Freezer
Réfrigérateur/congélateur
Kühl-Gefrierschrank
Frigorifero-Congelatore
Frigorífico-congelador
2
15
30
45
58
Contents
Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _
Operation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Daily use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _
2
4
4
5
6
Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7
What to do if… _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 8
Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 10
Environmental concerns _ _ _ _ _ _ _ _ _ _ _ 14
Subject to change without notice.
Safety instructions
In the interest of your safety and to ensure the
correct use, before installing and first using the
appliance, read this user manual carefully, including its hints and warnings. To avoid unnecessary mistakes and accidents, it is important to
ensure that all people using the appliance are
thoroughly familiar with its operation and safety
features. Save these instructions and make sure
that they remain with the appliance if it is moved
or sold, so that everyone using it through its life
will be properly informed on appliance use and
safety.
For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused
by omission.
Children and vulnerable people safety
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have
been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that
they do not play with the appliance.
• Keep all packaging well away from children.
There is risk of suffocation.
• If you are discarding the appliance pull the
plug out of the socket, cut the connection cable (as close to the appliance as you can)
and remove the door to prevent playing children to suffer electric shock or to close themselves into it.
• If this appliance featuring magnetic door
seals is to replace an older appliance having
a spring lock (latch) on the door or lid, be
2
sure to make that spring lock unusable before
you discard the old appliance. This will prevent it from becoming a death trap for a child.
General safety
Warning!
Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.
• The appliance is intended for keeping foodstuff and/or beverages in a normal household
and similar applications such as:
– staff kitchen areas in shops, offices and
other working environments;
– farm houses and by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments;
– catering and similar non-retail applications.
• Do not use a mechanical device or any artificial means to speed up the thawing process.
• Do not use other electrical appliances (such
as ice cream makers) inside of refrigerating
appliances, unless they are approved for this
purpose by the manufacturer.
• Do not damage the refrigerant circuit.
• The refrigerant isobutane (R600a) is contained within the refrigerant circuit of the appliance, a natural gas with a high level of environmental compatibility, which is nevertheless
flammable.
During transportation and installation of the
appliance, be certain that none of the components of the refrigerant circuit become damaged.
www.zanussi.com
If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition
– thoroughly ventilate the room in which the
appliance is situated
• It is dangerous to alter the specifications or
modify this product in any way. Any damage
to the cord may cause a short-circuit, fire
and/or electric shock.
Warning! Any electrical component (power cord, plug, compressor) must be replaced by a certified service agent or qualified
service personnel to avoid hazard.
1.
2.
•
•
•
•
Power cord must not be lengthened.
Make sure that the power plug is not
squashed or damaged by the back of the
appliance. A squashed or damaged power plug may overheat and cause a fire.
3. Make sure that you can come to the
mains plug of the appliance.
4. Do not pull the mains cable.
5. If the power plug socket is loose, do not
insert the power plug. There is a risk of
electric shock or fire.
6. You must not operate the appliance without the lamp cover (if foreseen) of interior
lighting.
This appliance is heavy. Care should be taken
when moving it.
Do not remove nor touch items from the
freezer compartment if your hands are damp/
wet, as this could cause skin abrasions or
frost/freezer burns.
Avoid prolonged exposure of the appliance to
direct sunlight.
Bulb lamps (if foreseen) used in this appliance are special purpose lamps selected for
household appliances use only. They are not
suitable for household room illumination.
Daily Use
• Do not put hot pot on the plastic parts in the
appliance.
• Do not store flammable gas and liquid in the
appliance, because they may explode.
www.zanussi.com
• Do not place food products directly against
the air outlet on the rear wall. (If the appliance
is Frost Free)
• Frozen food must not be re-frozen once it has
been thawed out.
• Store pre-packed frozen food in accordance
with the frozen food manufacturer's instructions.
• Appliance's manufacturers storage recommendations should be strictly adhered to. Refer to relevant instructions.
• Do not place carbonated or fizzy drinks in the
freezer compartment as it creates pressure
on the container, which may cause it to explode, resulting in damage to the appliance.
• Ice lollies can cause frost burns if consumed
straight from the appliance.
Care and cleaning
• Before maintenance, switch off the appliance
and disconnect the mains plug from the
mains socket.
• Do not clean the appliance with metal objects.
• Do not use sharp objects to remove frost
from the appliance. Use a plastic scraper.
• Regularly examine the drain in the refrigerator
for defrosted water. If necessary, clean the
drain. If the drain is blocked, water will collect
in the bottom of the appliance.
Installation
Important! For electrical connection carefully
follow the instructions given in specific
paragraphs.
• Unpack the appliance and check if there are
damages on it. Do not connect the appliance
if it is damaged. Report possible damages
immediately to the place you bought it. In that
case retain packing.
• It is advisable to wait at least four hours before connecting the appliance to allow the oil
to flow back in the compressor.
• Adequate air circulation should be around the
appliance, lacking this leads to overheating.
To achieve sufficient ventilation follow the instructions relevant to installation.
3
• Wherever possible the back of the product
should be against a wall to avoid touching or
catching warm parts (compressor, condenser) to prevent possible burn.
• The appliance must not be located close to
radiators or cookers.
• Make sure that the mains plug is accessible
after the installation of the appliance.
• Connect to potable water supply only (If a
water connection is foreseen).
Service
• Any electrical work required to do the servicing of the appliance should be carried out by
a qualified electrician or competent person.
• This product must be serviced by an authorized Service Centre, and only genuine spare
parts must be used.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in either its refrigerant circuit or insulation materials.
The appliance shall not be discarded together
with the urban refuse and rubbish. The insulation foam contains flammable gases: the appliance shall be disposed according to the applicable regulations to obtain from your local authorities. Avoid damaging the cooling unit, especially at the rear near the heat exchanger. The
materials used on this appliance marked by the
are recyclable.
symbol
Operation
Switching on
Insert the plug into the wall socket.
Turn the Temperature regulator clockwise to a
medium setting.
Switching off
To turn off the appliance, turn the Temperature
regulator to the "O" position.
Temperature regulation
The temperature is automatically regulated.
To operate the appliance, proceed as follows:
• turn the Temperature regulator toward lower
settings to obtain the minimum coldness.
• turn the Temperature regulator toward higher
settings to obtain the maximum coldness.
However, the exact setting should be chosen
keeping in mind that the temperature inside the
appliance depends on:
• room temperature
• how often the door is opened
• the quantity of food stored
• the location of the appliance.
Important! If the ambient temperature is high
or the appliance is fully loaded, and the
appliance is set to the lowest temperatures, it
may run continuously causing frost to form on
the rear wall. In this case the dial must be set to
a higher temperature to allow automatic
defrosting and therefore reduced energy
consumption.
A medium setting is generally the most
suitable.
First use
Cleaning the interior
Before using the appliance for the first time,
wash the interior and all internal accessories
with lukewarm water and some neutral soap so
4
as to remove the typical smell of a brand-new
product, then dry thoroughly.
Important! Do not use detergents or abrasive
powders, as these will damage the finish.
www.zanussi.com
Daily use
Freezing fresh food
The freezer compartment is suitable for freezing
fresh food and storing frozen and deep-frozen
food for a long time.
To freeze fresh foods it is not necessary to
change the medium setting.
However, for a faster freezing operation, turn the
temperature regulator toward higher settings to
obtain the maximum coldness.
the power has been off for longer than the value
shown in the technical characteristics chart
under "rising time", the defrosted food must be
consumed quickly or cooked immediately and
then re-frozen (after cooling).
Important! In this condition, the refrigerator
compartment temperature might drop below
0°C. If this occurs reset the temperature
regulator to a warmer setting.
Thawing
Deep-frozen or frozen food, prior to being used,
can be thawed in the refrigerator compartment
or at room temperature, depending on the time
available for this operation.
Small pieces may even be cooked still frozen,
directly from the freezer: in this case, cooking
will take longer.
Storage of frozen food
When first starting-up or after a period out of
use, before putting the products in the compartment let the appliance run at least 2 hours on
the higher settings.
Ice-cube production
This appliance is equipped with one or more
trays for the production of ice-cubes. Fill these
trays with water, then put them in the freezer
compartment.
Important! In the event of accidental
defrosting, for example due to a power failure, if
Important! Do not use metallic instruments to
remove the trays from the freezer.
Temperature Indicator
Important! This appliance is sold in France.
In accordance with regulations valid in this
country it must be provided with a special device (see figure) placed in the lower compartment of the fridge to indicate the coldest zone
of it.
www.zanussi.com
5
Movable shelves
Positioning the door shelves
The walls of the refrigerator are equipped with a series of
runners so that the
shelves can be positioned as desired.
To permit storage of
food packages of various sizes, the door
shelves can be
placed at different
heights.
Important! Do not
move the glass shelf
above the vegetable
drawer to ensure correct air circulation.
Gradually pull the
shelf in the direction
of the arrows until it
comes free, then reposition as required.
Helpful hints and tips
Hints for energy saving
• Do not open the door frequently or leave it
open longer than absolutely necessary.
• If the ambient temperature is high and the
Temperature Regulator is set to low temperature and the appliance is fully loaded, the
compressor may run continuously, causing
frost or ice on the evaporator. If this happens,
set the Temperature Regulator toward warmer settings to allow automatic defrosting and
so a saving in electricity consumption.
Hints for fresh food refrigeration
To obtain the best performance:
• do not store warm food or evaporating liquids
in the refrigerator
• do cover or wrap the food, particularly if it has
a strong flavour
• position food so that air can circulate freely
around it
Hints for refrigeration
Useful hints:
Meat (all types) : wrap in polythene bags and
place on the glass shelf above the vegetable
drawer.
For safety, store in this way only one or two
days at the most.
6
Cooked foods, cold dishes, etc..: these should
be covered and may be placed on any shelf.
Fruit and vegetables: these should be thoroughly cleaned and placed in the special drawer(s)
provided.
Butter and cheese: these should be placed in
special airtight containers or wrapped in aluminium foil or polythene bags to exclude as much
air as possible.
Milk bottles: these should have a cap and
should be stored in the bottle rack on the door.
Bananas, potatoes, onions and garlic, if not
packed, must not be kept in the refrigerator.
Hints for freezing
To help you make the most of the freezing process, here are some important hints:
• the maximum quantity of food which can be
frozen in 24 hrs. is shown on the rating plate;
• the freezing process takes 24 hours. No further food to be frozen should be added during this period;
• only freeze top quality, fresh and thoroughly
cleaned, foodstuffs;
• prepare food in small portions to enable it to
be rapidly and completely frozen and to make
it possible subsequently to thaw only the
quantity required;
www.zanussi.com
• wrap up the food in aluminium foil or polythene and make sure that the packages are
airtight;
• do not allow fresh, unfrozen food to touch
food which is already frozen, thus avoiding a
rise in temperature of the latter;
• lean foods store better and longer than fatty
ones; salt reduces the storage life of food;
• water ices, if consumed immediately after removal from the freezer compartment, can
possibly cause the skin to be freeze burnt;
• it is advisable to show the freezing in date on
each individual pack to enable you to keep
tab of the storage time.
• make sure that the commercially frozen foodstuffs were adequately stored by the retailer;
• be sure that frozen foodstuffs are transferred
from the foodstore to the freezer in the shortest possible time;
• not open the door frequently or leave it open
longer than absolutely necessary;
• once defrosted, food deteriorates rapidly and
cannot be refrozen;
• do not exceed the storage period indicated
by the food manufacturer.
Hints for storage of frozen food
To obtain the best performance from this appliance, you should:
Care and cleaning
Caution! Unplug the appliance before
carrying out any maintenance operation.
This appliance contains hydrocarbons in its
cooling unit; maintenance and recharging
must therefore only be carried out by authorized
technicians.
Periodic cleaning
The equipment has to be cleaned regularly:
• clean the inside and accessories with lukewarm water and some neutral soap.
• regularly check the door seals and wipe clean
to ensure they are clean and free from debris.
• rinse and dry thoroughly.
Important! Do not pull, move or damage any
pipes and/or cables inside the cabinet.
Never use detergents, abrasive powders, highly
perfumed cleaning products or wax polishes to
clean the interior as this will damage the surface
and leave a strong odour.
Important! Take care of not to damage the
cooling system.
Many proprietary kitchen surface cleaners contain chemicals that can attack/damage the plastics used in this appliance. For this reason it is
recommended that the outer casing of this appliance is only cleaned with warm water with a
little washing-up liquid added.
After cleaning, reconnect the equipment to the
mains supply.
Defrosting the refrigerator
Frost is automatically eliminated from the evaporator of the refrigerator compartment every time
the motor compressor stops, during normal use.
The defrost water drains out through a drain
hole into a special container at the back of the
appliance, over the motor compressor, where it
evaporates.
Clean the condenser (black grill) and the compressor at the back of the appliance with a
brush. This operation will improve the performance of the appliance and save electricity consumption.
www.zanussi.com
7
7.
It is important to periodically clean the defrost water drain hole
in the middle of the
refrigerator compartment channel to prevent the water overflowing and dripping
onto the food inside.
Reload the previously removed food into
the compartment.
Important! Never use sharp metal tools to
scrape off frost from the evaporator as you
could damage it. Do not use a mechanical
device or any artificial means to speed up the
thawing process other than those
recommended by the manufacturer. A
temperature rise of the frozen food packs,
during defrosting, may shorten their safe
storage life.
Defrosting the freezer
A certain amount of frost will always form
on the freezer shelves and around the top
compartment.
Important! Defrost the freezer when the frost
layer reaches a thickness of about 3-5 mm.
To remove the frost, do these steps:
1. Switch off the appliance.
2. Remove any stored food, wrap it in several
layers of newspaper and put it in a cool
place.
3. Leave the door open.
4. When defrosting is completed, dry the interior thoroughly and refit the plug.
5. Switch on the appliance.
6. Set the temperature regulator to obtain the
maximum coldness and run the appliance
for two or three hours using this setting.
Periods of non-operation
When the appliance is not in use for long periods, take the following precautions:
• disconnect the appliance from electricity supply
• remove all food
• defrost (if foreseen) and clean the appliance
and all accessories
• leave the door/doors ajar to prevent unpleasant smells.
If the cabinet will be kept on, ask somebody to
check it once in a while to prevent the food inside from spoiling in case of a power failure.
What to do if…
Warning! Before troubleshooting,
disconnect the mains plug from the mains
socket.
Only a qualified electrician or competent person
must do the troubleshooting that is not in this
manual.
Problem
The appliance does not operate. The lamp does not
operate.
8
Important! There are some sounds during
normal use (compressor, refrigerant circulation).
The appliance is switched off.
Switch on the appliance.
The mains plug is not connected to
the mains socket correctly.
Connect the mains plug to the mains
socket correctly.
www.zanussi.com
Problem
The lamp does not work.
The compressor operates
continually.
Solution
The appliance has no power. There
is no voltage in the mains socket.
Connect a different electrical appliance to the mains socket.
Contact a qualified electrician.
The lamp is in stand-by.
Close and open the door.
The lamp is defective.
Refer to "Replacing the lamp".
The temperature is not set correctly.
Set a higher temperature.
The door is not closed correctly.
Refer to "Closing the door".
The door has been opened too frequently.
Do not keep the door open longer
than necessary.
The product temperature is too
high.
Let the product temperature decrease to room temperature before
storage.
The room temperature is too high.
Decrease the room temperature.
Water flows on the rear
plate of the refrigerator.
During the automatic defrosting
process, frost defrosts on the rear
plate.
This is correct.
Water flows into the refrigerator.
The water outlet is clogged.
Clean the water outlet.
Products prevent that water flows
into the water collector.
Make sure that products do not touch
the rear plate.
Water flows on the ground.
The melting water outlet does not
flow in the evaporative tray above
the compressor.
Attach the melting water outlet to the
evaporative tray.
The temperature in the appliance is too low.
The temperature regulator is not set
correctly.
Set a higher temperature.
The temperature in the appliance is too high.
The temperature regulator is not set
correctly.
Set a lower temperature.
Replacing the lamp
Caution! Disconnect the plug from the
mains socket.
www.zanussi.com
9
Closing the door
1. Clean the door gaskets.
2. If necessary, adjust the door. Refer to "Installation".
3. If necessary, replace the defective door
gaskets. Contact the Service Center.
Remove the screw
from the lamp cover.
Remove the lamp
cover (refer to the illustration).
Replace the used
lamp with a new lamp
of the same power
and specifically designed for household
appliances (the maximum power is shown
on the lamp cover).
Install the lamp cover.
Tighten the screw to
the lamp cover.
Connect the plug to
the mains socket.
Open the door. Make
sure that the light
comes on.
Technical data
Dimension of the recess
Height
1446 mm
Width
560 mm
Depth
550 mm
Rising Time
20 h
Voltage
230-240 V
50 Hz
The technical information are situated in the rating plate on the internal left side of the appliance and in the energy label.
Installation
Caution! Read the "Safety Information"
carefully for your safety and correct
operation of the appliance before installing the
appliance.
10
Positioning
Install this appliance at a location where the ambient temperature corresponds to the climate
class indicated on the rating plate of the appliance:
www.zanussi.com
Ambient temperature
SN
+10°C to + 32°C
N
+16°C to + 32°C
ST
+16°C to + 38°C
T
+16°C to + 43°C
Electrical connection
Before plugging in, ensure that the voltage and
frequency shown on the rating plate correspond
to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for this
purpose. If the domestic power supply socket is
not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician.
The manufacturer declines all responsibility if
the above safety precautions are not observed.
This appliance complies with the E.E.C. Directives.
Door reversibility
The door of the appliance opens to the right. If
you want to open the door to the left, do these
steps before you install the appliance:
On the opposite side:
Install the lower pin.
Install the lower door.
Install the upper door.
Tighten the spacer
and the upper pin.
Remove the lower
door.
Loosen the lower pin.
Ventilation requirements
The airflow behind the
appliance must be
sufficient.
5 cm
min. 200cm2
min.
200cm2
Installing the appliance
Caution! Make sure that the mains cable
can move freely.
Do the following steps:
Loosen the upper pin Loosen the middle
and remove the
hinge.
spacer.
Remove the upper pin
and the upper door.
www.zanussi.com
11
x
2
I
x
1
4mm
44mm
I
1 If necessary cut
the adhesive sealing
strip and then apply it
to the appliance as
shown in figure.
2 Install the appliance in the niche.
Push the appliance in
the direction of the
arrows (1) until the
upper gap cover
stops against the
kitchen furniture.
Push the appliance in
the direction of the
arrows (2) against the
cupboard on the opposite side of the
hinge.
4 Attach the appli3 Adjust the appliance to the niche with
ance in the niche.
4 screws.
Make sure that the
distance between the
appliance and the
cupboard front-edge
is 44 mm.
The lower hinge cover
(in the accessories
bag) makes sure that
the distance between
the appliance and the
kitchen furniture is
correct.
Make sure that the
clearance between
the appliance and the
cupboard is 4 mm.
Open the door. Put
the lower hinge cover
in position.
C
D
E
E
B
5 Remove the correct part from the
hinge cover (E). Make
sure to remove the
part DX, in the case
of right hinge, SX in
opposite case.
12
6 Attach the covers
(C, D) to the lugs and
the hinge holes.
Install the vent grille
(B).
Attach the hinge covers (E) to the hinge.
www.zanussi.com
Ha
~50 mm
90o
Hb
21 mm
~50 mm
Hc
Hb
21 mm
Hd
7 Disconnect the
parts (Ha), (Hb), (Hc)
and (Hd).
90o
Hd
8 Install the part
(Ha) on the inner side
of the kitchen furniture.
8 mm
Ha
13 Press the part
14 To open the doors
(Hd) on the part (Hb). do these steps.
Use the sliding system previously illustrated or open one of
the two doors by fitting the small handle
supplied as an accessory.
Hb
Hc
Ha
9 Push the part (Hc) 10 Open the appliance door and the
on the part (Ha).
kitchen furniture door
at an angle of 90°.
Insert the small
square (Hb) into
guide (Ha).
Put together the appliance door and the
furniture door and
mark the holes.
Do a final check to make sure that:
• All screws are tightened.
• The magnetic sealing strip is attached tightly
to the cabinet.
Important! If the ambient temperature is low
(for example, in the Winter), the size of the
gasket decreases. The size of the gasket
increases when the ambient temperature
increases.
8 mm
K Ha
Hb
12 Place the small
square on the guide
Remove the brackets again and fix it with
the screws supplied.
and mark a distance
of 8 mm from the out- Align the kitchen furniture door and the
er edge of the door
appliance door by adwhere the nail must
justing the part Hb.
be fitted (K).
11
www.zanussi.com
13
Environmental concerns
The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
14
potential negative consequences for the
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
www.zanussi.com
15
18
18
19
20
22
•
•
•
•
•
3.
4.
•
•
•
•
www.zanussi.com
•
•
•
•
18
www.zanussi.com
www.zanussi.com
19
OK
Clayettes amovibles
www.zanussi.com
www.zanussi.com
23
Anomalie
24
www.zanussi.com
2.
3.
1446 mm
560 mm
550 mm
20 h
Tension
230-240 V
50 Hz
SN
N
ST
T
25
x
2
x
1
5 cm
min. 200cm2
min.
200cm2
26
www.zanussi.com
C
D
I
E
E
4mm
44mm
I
B
www.zanussi.com
Hb
Hc
Hd
90o
21 mm
27
8 mm
Ha
Hb
Hb
Hc
Ha
Hd
8 mm
K Ha
Hb
28
www.zanussi.com
29
30
32
33
33
34
35
37
40
40
43
www.zanussi.com
www.zanussi.com
33
•
•
•
•
35
36
www.zanussi.com
Der Kompressor arbeitet
ständig.
www.zanussi.com
37
Störung
Das ist normal.
38
www.zanussi.com
www.zanussi.com
39
1446 mm
560 mm
Tiefe
550 mm
20 h
Spannung
230-240 V
50 Hz
Umgebungstemperatur
SN
+10°C bis + 32°C
N
+16°C bis + 32°C
ST
+16°C bis + 38°C
T
+16°C bis + 43°C
www.zanussi.com
x
2
x
1
5 cm
min. 200cm2
min.
200cm2
www.zanussi.com
41
C
D
I
E
E
4mm
44mm
I
B
42
Ha
Hb
Hc
Hd
90o
21 mm
www.zanussi.com
8 mm
Ha
Hb
Hb
Hc
Ha
8 mm
K Ha
Hb
Hd
11
44
www.zanussi.com
45
47
48
48
49
50
51
53
53
57
•
•
•
•
46
•
•
•
•
•
•
47
48
www.zanussi.com
Ripiani mobili
49
50
www.zanussi.com
5.
6.
7.
www.zanussi.com
Possibile causa
51
La porta viene aperta troppo frequentemente.
52
www.zanussi.com
1446 mm
560 mm
550 mm
Tempo di salita
20 h
Tensione
230-240 V
50 Hz
www.zanussi.com
53
Temperatura ambiente
SN
da + 10°C a + 32°C
N
da + 16°C a + 32°C
ST
da + 16°C a + 38°C
T
da + 16°C a + 43°C
54
5 cm
min. 200cm2
min.
200cm2
www.zanussi.com
x
2
I
x
1
4mm
44mm
I
E
B
www.zanussi.com
55
Ha
~50 mm
90o
Hb
21 mm
~50 mm
Hc
Hb
21 mm
Hd
90o
Hd
Ha
Hb
Hc
Ha
8 mm
K Ha
Hb
11
www.zanussi.com
www.zanussi.com
57
58
60
61
61
62
63
64
66
66
70
Salvo modificaciones.
•
•
•
•
www.zanussi.com
www.zanussi.com
www.zanussi.com
61
62
5.
6.
7.
64
Posible causa
www.zanussi.com
Posible causa
La temperatura no se ha ajustado
correctamente.
El regulador de temperatura no se
ha ajustado correctamente.
El regulador de temperatura no se
ha ajustado correctamente.
www.zanussi.com
65
1446 mm
Anchura
560 mm
Profundidad
550 mm
20 h
Voltaje
230-240 V
50 Hz
Temperatura ambiente
SN
+10°C a + 32°C
N
+16°C a + 32°C
ST
+16°C a + 38°C
T
+16°C a + 43°C
5 cm
min. 200cm2
min.
200cm2
www.zanussi.com
67
x
2
I
x
1
4mm
44mm
I
E
B
68
www.zanussi.com
Ha
8 mm
~50 mm
90o
Hb
K Ha
21 mm
~50 mm
Hc
21 mm
Hd
90o
Ha
Hb
Hb
Hc
Ha
Hb
Hd
www.zanussi.com
69
70
www.zanussi.com
www.zanussi.com
71
222358632-A-052013
www.zanussi.com/shop

advertisement

Related manuals

advertisement

Languages

Only pages of the document in English were displayed