USER`S MANUAL • MODE D`EMPLOI

USER`S MANUAL • MODE D`EMPLOI
USER’S MANUAL • MODE D’EMPLOI
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
POUR VOTRE SÉCURITÉ: Lire attentivement ces instructions avant d’utiliser l’appareil.
• OWNER’S USE AND CARE GUIDE
• GUIDE D’UTILISATION ET SOIN DE PROPRIÈTAIRE
MODEL • MODÈLE
DDR60A4GP
PORTABLE DEHUMIDIFIER
DÉSHUMIDIFICATEUR PORTATIF
ENGLISH • ANGLAIS
PAGE 1
FRENCH • FRANÇAIS
PAGE 14
DANBY PRODUCTS LIMITED, ONTARIO, CANADA N1H 6Z9
DANBY PRODUCTS INC., FINDLAY, OHIO, USA 45840
09.01.14
TO OBTAIN WARRANTY SERVICE YOU MUST PROVIDE A VALID PROOF OF
PURCHASE. PLEASE STAPLE YOUR RECEIPT TO THIS PAGE FOR FUTURE
REFERENCE.
------------------------------------------------------------------------------------------------------------------POUR OBTENIR LE SERVICE SUR GARANTIE VOUS DEVEZ FOURNIR UNE
PREUVE D’ACHAT VALIDE. VEUILLEZ AGRAFER VOTRE REÇU À CETTE PAGE
POUR LA RÉFÉRENCE FUTURE.
------------------------------------------------------------------------------------------------------------------IMPORTANT - GROUNDING METHOD
This product is factory equipped with a power supply cord that has a three-pronged grounded plug. It must
be plugged into a mating grounding type receptacle in accordance with the National Electrical Code and
applicable local codes and ordinances. If the circuit does not have a grounding type receptacle, it is the
responsibility and obligation of the customer to exchange the existing receptacle in accordance with the
National Electrical Code and applicable local codes and ordinances. The third ground prong should not,
under any circumstances, be cut or removed. Never use the cord, the plug or the appliance when they show
any sign of damage. Do not use your appliance with an extension cord unless it has been checked and
tested by a qualified electrician or electrical supplier.
CONTENTS
TABLE DES MATIÈRES
CAUTION
Read and follow all safety rules and
operating instructions before first use of this
product.
WELCOME
Welcome to the Danby family. We’re proud of our quality products, and we believe in dependable service, like you will find
in this Owner’s Use and Care Guide, and like you will receive from our friendly customer service department. Best of all,
you will experience these values each and every time you use your Danby appliance. That’s important, because your new
appliance will be a part of your family for a long time.
Note the information below; you will need this information to obtain service under warranty.
To receive service, you must provide the original receipt.
Model No:
Serial No:
Date Purchased:
NEED HELP?
Before you call for service, here are a few things you can do to
help us serve you better:
Read this Owner’s Use and Care Guide:
It contains instructions to help you use and maintain your
appliance properly.
If you received a damaged appliance:
Immediately contact the retailer (or builder) that sold you the
appliance.
Save time and money:
Check the Troubleshooting section at the end of the guide
before calling. This section helps you solve common problems
that may occur.
If you do need service, you can relax, knowing help is only a
phone call away.
Tel: 1-800-26(1-800-263-2629)
WARNING
Improper connection of the grounding plug can result in risk of
Fire, Electric Shock and/or injury to Persons associated with the
appliance. Check with a qualified service representative if in doubt
that the appliance is properly grounded.
1
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
NOTE
The WARNING instructions issued in this manual are not meant to cover all possible conditions and situations that may
occur. Person(s) installing, maintaining, or operating the appliance must exercise caution and care. Failure to install,
maintain, and/or operate the equipment according to the manufacturer’s instructions may result in conditions which can
produce personal injury and damage to your unit and/or property damage. Contact your dealer, service agent, and/or the
manufacturer about any problems or conditions you do not fully understand. For Danby Customer Service call (1-800263-2629).
ELECTRICAL
REQUIREMENTS
To reduce the risk of fire, electric shock, or personal injury, all wiring and grounding must conform with the latest edition of
Local and National Electrical codes.
• It is the customer’s responsibility to have the wiring and fuses checked by a qualified electrician to make sure adequate
electrical power is available.
• This appliance is designed to operate on an effectively grounded, separately branched, polarized, 3-wire, 120 Volt
60 Hertz (alternating current) circuit protected by a 15 ampere fuse, equivalent fuse or circuit breaker. The three-prong
grounding plug on the power cord should be plugged directly into the aforementioned receptacle rated 110/120 V.A.C.
• Do not connect the dehumidifier to a multiple socket outlet that is also being used for other electrical appliances.
FOR YOUR SAFETY: To reduce the risk of fire or explosion, do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.
GROUNDING
INSTRUCTIONS
Improper connection of the equipment-grounding conductor can result in a risk of electrical shock. Check with a qualified
electrician or service-person if you are in doubt as to whether your appliance outlets are properly grounded.
• This appliance must be grounded. In the event of malfunction or breakdown, grounding will reduce the risk of electrical
shock by providing a path of least resistance for electrical current. This appliance is equipped with a cord that has an
equipment-grounding conductor and 3 prong grounding plug. The plug must be connected into an outlet that is properly
installed and grounded in accordance with all local codes and ordinances.
• Do not modify the plug provided with this appliance. If it will not fit the outlet, have a proper outlet installed by a qualified
electrician.
• If the household electrical supply does not meet the above specifications, or if you are not sure your home has an
effective ground, have a qualified electrician or your local electrical utility company check it and correct any problems.
SAVE THESE INSTRUCTIONS
2
IMPORTANT SAFETY INFORMATION
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
SAFETY PRECAUTIONS
When using this dehumidifier, always follow basic safety precautions, including the following:
• Use this appliance only for its intended purpose as described in this Owner’s Manual.
• This dehumidifier must be properly installed and grounded as described in this manual before it is used.
• Never operate this dehumidifier in an area that is likely to accumulate standing water. If this condition develops, for your
safety disconnect the power supply before stepping into the water.
• Never unplug your dehumidifier by pulling on the power chord. Always grip the plug firmly and pull straight out from the
receptacle.
• Replace immediately all electric service cords that have become frayed or otherwise damaged. A damaged power
supply cord must be replaced with a new power supply cord obtained from the manufacturer, and not repaired. Do not
use a cord that shows cracks or abrasion damage along its length, or at either the plug or connector end.
• If the receptacle does not match the plug, the receptacle must be changed out by a qualified electrician.
• Turn the dehumidifier OFF and unplug it before cleaning.
• For your safety, do not store or use combustible materials, gasoline or other flammable vapors or liquids in the vicinity of
this or any other appliance.
• All dehumidifiers contain refrigerants, which under federal law must be removed prior to product disposal. If you are
disposing of a product with refrigerants, check with the company handling disposal about what to do. Check for
local regulatory compliance regarding the approved and safe disposal of this appliance.
• Do not use outdoors.
• This dehumidifier is intended for indoor residential applications only. This dehumidifier should not be used
for commercial or industrial applications.
SAVE THESE INSTRUCTIONS
3
INSTALLATION INSTRUCTIONS
LOCATION
• Select a suitable location, making sure you have easy access to an electrical outlet (avoid the use of extension cords).
If it is absolutely necessary to use an extension cord, use an approved “air conditioner” heavy duty extension cord ONLY
(available at most local hardware stores).
• Make sure there are no obstructions restricting airflow through the front air intake grill. Maintain a minimum clearance
of at least 20 cm (8”) between adjacent walls and the back of the unit, to allow for proper air circulation and maximum
efficiency. To achieve maximum operating efficiency from your dehumidifier, the recommended (room ambient) operating
temperatures should be between 5°C (41°F) and 35°C (95°F).
• It is important to remember the efficiency of a dehumidifier will be affected/influenced by the rate at which new humid
air (moisture) is allowed to infiltrate the same space/area. To maintain efficiency, the dehumidifier must be operated in an
enclosed area. Keep all doors and windows closed.
• Do not use this unit outdoors. This dehumidifer is intended for indoor residential applications only. This dehumidifier
should not be used for commercial or industrial applications.
• Place the dehumidifier on a smooth, level floor strong enough to support the unit with a full bucket of water.
• Place the unit where it has access to an electrical outlet.
• This unit has 4 castors which can move freely. Do not force castors to move over carpet, and refrain from moving the
unit with water in the bucket (the unit may tip over and spill water). Protect wood floors from possible spillage or
scratches when moving unit.
• Remove accessory bag from bucket and store it in a safe place.
FEATURES
• Soft touch (Electronic)Control Key Pads
• Auto-Sensing Humidity Control
• Adjustable Humidity Settings (30% - 90%)
• 2 Fan Speed Settings (High/Low)
• Delay Start Protection (Compressor)
• Auto-Defrost (De-Icer)
Handle
4
• Full Bucket Indicator Light
• Easy Roll Castors (4)
• Front Mounted Water Tank(Removable)
• Direct Drain Option
• Quiet Operation
• Removable Air Filter
OPERATING INSTRUCTIONS
START OPERATION
1. Place the product in an upright position on a flat, stable, and heat-resistant
surface. Make sure there is nothing flammable or heat sensitive within 39
inches (100 cm). Operating the product in any other position could cause a
hazard.
2. Insert the plug into a suitable wall socket. The dehumidifier is suitable for
operating on an electrical supply having the same voltage as that shown on its
rating label.
3. Make sure the water tank is correctly positioned. After switching the unit on for
the first time, if the “Bucket Full” light illuminates, pull out the water tank and
check that the “float” lever is able to move freely. Then return the water tank to
the correct position (Fig. 1).
CONTROL PANEL
INSTRUCTIONS
NOTE: The control panel of the unit you purchased may be slightly different depending on the model number.
When you push the button to change operation modes, the unit will make a beeping sound to indicate that it is
changing modes.
1) POWER BUTTON: On/Off
setting. The humidity is adjusted in increments of 5%
by each pressing of the button. The adjustable range is
within 30% RH (relative humidity) to 90% RH. 10 seconds
after setting the humidity, the display will change back to
showing the current humidity.
2) FAN SPEED BUTTON: High/ Low
3) TIMER BUTTON: When the unit is operating, press
TIMER to set number of hours desired until the unit will
shut off. When the unit is in stand-by, press TIMER to set
the number of hours desired until the unit will turn on. Set
the timer from 1-24 hours. To cancel the timer, proceed as
above but set the “timer off” to zero (0) hours.
7) CURRENT TEMP/ TIMER SET DISPLAY:
When the unit is running, it displays the current temperature. Press the TIMER button to set the machine to shut
off automatically after a specified amount of time. 10
seconds after displaying the timer, the display will change
back to showing the current temperature.
4) º C/ º F BUTTON: Press the º C/ º F button to toggle
between degrees Celsius and Fahrenheit.
5) Receiving Sensor
8) DEFROST LIGHT: When the temperature is low, the
unit enters defrost mode, and the defrost light illuminates.
6) SET HUMIDITY/ CURRENT HUMIDITY DISPLAY:
When the unit is running, it displays the current humidity.
Press the UP or DOWN buttons to select the humidity
9) BUCKET FULL LIGHT: When the water tank is full, the
bucket full light illuminates.
5
OPERATING INSTRUCTIONS
REMOTE CONTROL
The functions work the same as your dehumidifier’s touch controls.
1. Power button: On/Off
2. Fan speed button: High/ Low
3. On/Off timer button:
• In running mode: auto switch OFF
• in standby mode: auto switch ON.
4. Temperature display selector button (Celsius/ Fahrenheit): Press the º C/ º F
button to toggle between degrees Celsius and Fahrenheit.
5. Timer/ humidity button:
•
Used for adjusting the timer and the humidity.
•
The default display is room humidity.
•
When the “+” or “-” button is pressed, the set humidity is displayed and may be
adjusted. After 10 seconds, the display will revert back to room humidity. The
remote operates within a range of 6 meters (16.4 ft.) from the receiver located
inside the main unit. Any obstruction between the receiver and remote may cause
signal interference, limiting the ability to program the main unit.
BATTERIES: Remove the cover on the back of the remote controller and insert the batteries with the (+) and (-) poles
pointing in the proper direction.
CAUTION: Use only AAA or IECR03 1.5V batteries. Remove the batteries if the remote control is not used for one month
or longer. Do not attempt to recharge the supplied batteries. All batteries should be replaced at the same time. Do not
dispose of the batteries in a fire, as they may explode.
•
•
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechageable (ni-cad, ni-mh, etc.) batteries.
CAN ICES-3 (B) / NMB-3 (B)
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
1) Reorient or relocate the receiving antenna.
2) Increase the separation between the equipment and receiver.
3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4) Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for FCC compliance could void the user’s
authority to operate the equipment.
This appliance complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1) This device may not cause harmful interference.
2) This device must accept any interference received, including interference that may cause undesired operation.
6
OPERATING INSTRUCTIONS
WATER FULL INDICATOR LIGHT (RED)
When the bucket is full and/or incorrectly positioned inside the cabinet, the water full red light turns on and remains on
until such time as the bucket is emptied and/or correctly re-positioned. This condition will result in the immediate shut
down of the dehumidifying system (both compressor and fan motor operation are terminated). This is a safety feature.
When the bucket is emptied and/or correctly re-positioned, the dehumidifier will resume operation automatically.
NOTE: It may take several minutes before operating conditions resume.
The water tank should be carefully removed from the machine by sliding it outward from the
front of the unit, and should be emptied. When the empty tank is replaced properly in the
machine, the unit will start up and run normally (Fig. 2).
NOTE: Please use both hands to carefully empty the water tank.
WATER TANK OPERATION
The water tank holds accumulated condensed water and, by means of a safety switch, controls both the water level and
operation of the dehumidification process.
When the water tank is full and/or accidentally displaced insider the cabinet, the float switch actuator (inside the tank)
breaks contact with the safety swtich. This condition results in the immediate shut down of the compressor and fan motor
system, preventing moisture from being condensed.
IMPORTANT
Never tamper with or attempt to defeat the water level (safety) float
switch system. Proper installation of the water tank is crucial in
maintaining reliable dehumidifier operation.
DEHUMIDIFYING
Dehumidifying is a means of removing moisture from the air. A dehumidifier will help to protect your home and valued
possessions from damage (swelling) caused by moisture in the air. Essentially, a dehumidifier removes moisture from the
air as the moist air passes over a dehumidifying (evaporator) coil. Moisture is condensed on the evaporator coil, drained,
and collected inside an internal (removable) water tank located at the front of the unit. The exhausted air being returned
into the room environment is elevated several degrees, causing the surrounding air temperature to increase
(slightly). This process also contributes to lowering the relative humidity of the surrounding air.
DEHUMIDIFYING MODE SELECTION:
1) To turn the unit on, press the ON / OFF button.
2) Press the humidity
or
buttons to select a desired RH operating value (30%-90%).
FAN SPEED SELECTION:
Select a fan speed on the keypad. The speed you select is identified by the (illuminated) indicator light located directly
above the selection made.
7
OPERATING INSTRUCTIONS
FACTORY DEFAULT SETTING
Each time the unit is disconnected/re-connected and/or in the event of a power failure, the electronic circuit board
automatically defaults to the following factory setting: HUMIDITY SETTING - 60%, FAN SPEED - LOW.
NOTE: In the event of a power failure, all previous settings are automatically erased/cancelled. If your program setting
was different from the above (default setting) it will be necessary to re-program your settings. When the unit is switched
“OFF” manually (using the on/off keypad) the unit will always default to the last program setting that was used.
After the unit has stopped, it may take several minutes before operating conditions resume.
DEFROST
When the machine is operated at low temperatures (less than 18°C (64.4°F)), the surface of the evaporator may
accumulate a layer of frost which would reduce the efficiency of the machine. When this happens the machine will go into
periodic defrost mode. The machine will operate in temperatures down to 5°C (41°F). The time taken to defrost may vary.
If the machine freezes up, it should be turned off at the power supply and re-started. If the room temperature remains
below 5°C (41°) the machine should be switched off.
AIR FILTER
Your dehumidifier features a removable Air Filter. This filter is located at the front of the unit (behind the air intake grill)
directly above the water tank compartment. The air filter plays an important role in helping to reduce (minimize) dust/
dirt particles from the surrounding environment. A blocked/clogged air filter reduces air intake, impacting negatively on
operating efficiency. To maintain maximum operating efficiency, the filter must be checked and cleaned regularly (every 2
weeks). More frequent cleaning may be required depending upon indoor air quality.
IMPORTANT: Never operate the unit without the air filter in place.
AIR FILTER CLEANING STEPS:
1) Pull the air filter out gently (Fig. 3).
2) Clean the filter with a vacuum cleaner, or wash it with clean water and dry with a dry cloth.
3) Put the clean air filter back in place and continue to operate the dehumidifier.
8
OPERATING INSTRUCTIONS
INSTALLING PVC DRAIN HOSE
When using the continuous drain function, the PVC hose must be placed horizontally below the drainage hole. Avoid
uneven ground and folding the hose. NOTE: Should you damage or misplace the PVC drain hose, a standard garden
hose can be used.
CONTINUOUS DRAIN
The function of continuous drain can be performed using the following
steps:
1) To save having to periodically empty the water tank, this unit
can be configured for continuous drain. Use the supplied
drain hose to connect to the continuous drain connector.
2) Unscrew and remove the drain cover at the rear of the unit (Fig. A).
3) Remove the soft rubber stopper, and place it in the water
tank for safe keeping (Fig. B).
4) Insert the drain hose through the hole of the drain cover (Fig. C).
5) Ensure the rubber seal ring is properly seated in the end of the
hose.
6) Connect the drain hose to the drain port (Fig. D).
7) Tighten the drain cover in a clockwise direction onto the rear of the
unit (Fig. D).
8) Place the bucket in its original location (Fig. E).
9
CAUTIONS
1. DO NOT pull on the power cord to avoid breakage, potential
danger, or injury.
2. DO NOT use insect/oil/paint spray around the machine; these
might cause damage to plastic parts or start a fire.
3. DO NOT place the unit on uneven ground to avoid shaking,
noise, and water leakage.
4. Always keep the unit 20cm or more from the wall to dissipate
heat properly.
5. DO NOT drop anything into the machine.
6. Close all windows to allow for the maximum possible efficiency
for removing moisture.
7. Keep the machine away from any type of heat source.
8. When moving or putting in storage, do not place the dehumidifier on its side or upside down to avoid shaking.
10
CARE AND MAINTENANCE
CLEANING
CAUTION:
Before attempting to clean and/or service this unit, always disconnect the power
supply cord from the electrical power supply / outlet.
1. DO NOT use gasoline, benzene, paint thinner, or any other chemicals to clean this unit, as these substances will
damage/deform the plastic components and luster finish.
2. Never attempt to clean the unit by pouring water directly over any of the surface areas, as this will cause deterioration
of electrical components and wiring insulation.
3. Use only a mild dish washing detergent, lukewarm water, and a soft cloth to wipe the exterior surface of the unit and
dry thoroughly.
STORAGE
When the dehumidifier is not being used for long time periods, please follow these instructions:
1. Disconnect the power cord from the power supply.
2. Empty the water tank and wipe (clean) thoroughly.
3. Clean air filter thoroughly.
4. Re-package the unit in its original carton.
5. Store the unit upright in a dry location.
11
TROUBLESHOOTING GUIDE
Occasionally, a problem is minor and a service call may not be necessary - use this troubleshooting guide for a possible
solution. If the unit continues to operate improperly, call an authorized service depot or Danby’s Toll Free Number 1-800263-2629 for assistance.
PROBLEM
Dehumidifier does
not start.
POSSIBLE CAUSE
SOLUTION
The dehumidifier is unplugged.
• Make sure the dehumidifier’s plug is pushed completely into the outlet.
The fuse is blown/circuit breaker is
tripped.
• Check the house fuse/circuit breaker box and replace the fuse or reset
the breaker.
Dehumidifier has reached its preset • The dehumidifier automatically turns off when either condition occurs.
Change to a lower setting or empty the bucket and replace properly.
level or bucket is full.
Bucket is not in the proper position. • The bucket must be in place and securely seated for the dehumidifier to
operate.
Dehumidifier does
not dry the air as it
should.
Power failure
• There is a protective time delay (up to 3 minutes) to prevent tripping of the
compressor overload. For this reason, the unit may not start normal
dehumidifying for 3 minutes after it is turned back on.
Did not allow enough time to
remove the moisture.
• When first installed, allow at least 24 hours to maintain the desired
dryness.
Airflow is restricted.
• Make sure there are no curtains, blinds or furniture blocking the front or
back of the dehumidifier. See the Location section.
Dirty filter.
• See the Air Filter section.
The Humidity Control may not be
set low enough.
• For drier air, press the
Doors and windows may not be
closed tightly.
button and set to a lower percent value (%).
• Check that all doors, windows and other openings are securely closed.
Clothes dryer may be blowing mois- • Install the dehumidifier away from the dryer. The dryer should be vented to
the outside.
ture-laden air into the room.
Room temperature is too low.
Dehumidifier runs too Area to be dehumidified is too
much
large.
• Moisture removal is best at higher room temperatures. Lower room
temperatures will reduce the moisture removal rate. Models are designed
to be operated at temperatures above 41°F (5°C).
• The capacity of your dehumidifier may not be adequate.
Doors and windows are open.
• Close all doors and windows to the outside.
Frost appears on the
coils
Dehumidifier has been recently
turned on, or room temperature is
below 41°F (5°C).
• This is normal. Frost will usually disappear within 60 minutes. See the
Defrost section.
Controls cannot be
set
The compressor will turn off and
the fan will automatically continue
to run for approximately 3 minutes
at a fixed setting.
• This is normal. Wait approximately 3 minutes and set the fan as desired.
Fan noise
Air is moving through the
dehumidifier.
• This is normal.
Water on floor
Hose connection may be loose.
Intend to use the bucket to collect
water, but a hose is attached.
• Check the hose connection. See the Continuous Drain section.
• Disconnect the hose if using the bucket to collect water. See the
Continuous Drain section.
12
LIMITEDIN-HOME
APPLIANCE
WARRANTY
LIMITED
APPLIANCE
WARRANTY
This quality
quality product
is warranted
to be free from
manufacturer’s
in material anddefects
workmanship,
provided that
theworkmanship,
unit is
used under
the normal
This
product
is warranted
to be
free fromdefects
manufacturer’s
in material
and
provided
thatoperating
the unit is
conditions
intended
by the manufacturer.
used
under
the normal
operating conditions intended by the manufacturer.
This
is available
only
to the
person
towas
whom
thesold
unit
sold(Canada)
by Danby
ProductsProducts
Limited
or
This warranty
warranty is available
only to the
person
to whom
the unit
originally
by was
Danbyoriginally
Products Limited
or Danby
Inc.(Canada)
(U.S.A.) (hereafter
Danby
Inc. (U.S.A.)
or by an authorized distributor of Danby, and is non-transferable.
“Danby”)Products
or by an authorized
distributor(hereafter
of Danby, and“Danby”)
is non-transferable.
TERMS OF WARRANTY
TERMS OF WARRANTY
Plastic
parts,
warranted
for days
thirty
only
purchase
with no extensions provided.
Plastic parts,
are are
warranted
for thirty (30)
only(30)
fromdays
purchase
date,from
with no
extensions date,
provided.
First
24 months
First Year
During
the
first(12)
twenty-four
(24) months,
anyproduct
functional
of this
to be defective,
will be
During
the first
twelve
months, any functional
parts of this
found toparts
be defective,
willproduct
be repairedfound
or replaced,
at warrantor’s
repaired
or replaced,
at warrantor’s
option,
at no charge
to the ORIGINAL
purchaser. option, at no charge to the ORIGINAL purchaser.
To obtain
To obtain
service
It will be the consumer’s responsibility to transport the appliance (at their own expense) to the original
Danby
reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app
liance
retailer (point of purchase) or a service depot for repair. Contact your dealer from whom your unit was
requiring
service outside the limited boundaries of “In Home Service” , it will be the consumer’s responsibility to transport the appliance (at
purchased, or contact your nearest authorized Danby service depot, where service must be performed
their
own expense) to the original retailer (point of purchase) or a service depot for repair. See “Boundaries of In Home Serv
ice” below.
by a qualified service technician. If service is performed on the unit by anyone other than an authorized
Contact
your dealer from whom your unit was purchased, or contact your nearest authorized Danby service depot, where service
service depot, or the unit is used for commercial application, all obligations of Danby under this warranty
must
be performed by a qualified service technician.
shall be void.
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli
cation, all
obligations of Danby under this warranty shall be void.
Service
Nothing within this warranty shall imply that Danby will be responsible or liable for any spoilage or damage to food or other
contents of this appliance, whether due to any defect of the appliance, or its use, whether proper or improper.
Boundaries of
In Home Service
If the appliance is installed in a location that is 100 kilometers (62 miles) or more from the nearest service center your unit
must be
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certif
ied for
warranty service by Danby. Transportation chargesEXCLUSIONS
to and from the service location are not protected by this warranty and are t
he
responsibility of the purchaser.
Except as herein provided, by Danby, there are no other warranties, conditions, representations or guarantees, express or
implied, made or intended by Danby or its authorized distributors and all other warranties, conditions, representations or
Nothing withinincluding
this warrantyany
shall imply
that Danbyconditions,
will be responsible
or liable for any spoilage
or damage tounder
food or other
of thisAct
appliance,
whether
due
guarantees,
warranties,
representations
or guarantees
any cSale ontents
of Goods
or like
legislation
any defectisofhereby
the appliance,
or its use,excluded.
whether proper
or improper.
ortostatute
expressly
Except
as herein provided, Danby shall not be responsible for any damages to
persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction of
EXCLUSIONS
the unit and by the purchase of the unit, the purchaser does
hereby agree to indemnify and hold harmless Danby from any
Save asfor
herein
provided,to
Danby,
there areornoproperty
other warranties,
conditions,
or guarantees, express or implied, m
ade or intended by Danby or its
claim
damages
persons
caused
by therepresentations
unit.
authorized distributors and all other warranties, conditions, representations or guarantees, including any warranties, conditio
ns, representations or guarantees
under any Sale of Goods Act or like legislation or statue is hereby expressly
excluded.PROVISIONS
Save as herein provided, Danby shall no
t be responsible for any damages
GENERAL
to persons or property, including the unit itself, howsoever caused or any consequential damages arising from the malfunction o
f the unit and by the purchase of
thewarranty
unit, the purchaser
does hereby
agree tocontained
indemnify andorhold
Danby
from any
claimdamage
for damagesortorepair
persons or
caused
thefollowing:
unit.
No
or insurance
herein
setharmless
out shall
apply
when
is propert
caused by yany
of by
the
1) Power failure.
2) Damage in transit or when moving the appliance. GENERAL PROVISIONS
3) Improper power supply such as low voltage, defective house wiring or inadequate fuses.
No warranty or insurance herein contained or set out shall apply when damage or repair is caused by any of the following:
4) Accident, alteration, abuse or misuse of the appliance such as inadequate air circulation in the room or abnormal operating
1) Power
failure. high or low room temperature).
conditions
(extremely
in transit or
moving the
appliance. (ie. If the appliance is not installed in a domestic residence).
5) Use2)forDamage
commercial
orwhen
industrial
purposes
6) Fire,3) water
damage,
theft,
hostility,
acts
ofwiring
Godorsuch
as hurricanes,
floods etc.
Improper
power supply
suchwar,
as lowriot,
voltage,
defective
house
inadequate
fuses.
7) Service
calls resulting
in customer
4) Accident,
alteration, abuse
or misuse ofeducation.
the appliance such as inadequate air circulation in the room or abnormal operating con
ditions
8) Improper
Installation
(ie.room
Building-in
of a free standing appliance or using an appliance outdoors that is not approved for
(extremely
high or low
temperature).
outdoor application).
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
Proof of purchase date will be required for warranty claims; so, please retain bill of sale. In the event warranty service is
6) Fire,
water damage,
theft, war, riot,
acts of God such asSERVICE
hurricanes, floods
etc.
required,
present
this document
to hostility,
our AUTHORIZED
DEPOT.
7) Service calls resulting in customer education.
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out
door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is
required, present this document to our
AUTHORIZED SERVICE DEPOT.
Warranty Service
Warranty
Service
Carry-In
In-home
Danby Products Limited
Danby
Products
PO
Box
1778,Limited
Guelph, Ontario, Canada N1H 6Z9
PO Box 1778, Guelph,
Canada N1H
6Z9 (519) 837-0449
Telephone:
(519)Ontario,
837-0920
FAX:
Telephone: (519) 837-0920 FAX: (519) 837-0449
1-800-263-2629
1-800-263-2629
07/13
04/09
Danby Products Inc.
DanbyU.S.A.
Products Inc.
PO Box 669, Findlay, Ohio,
45840
PO 425-8627
Box 669, Findlay,FAX:
Ohio, U.S.A.
45840
Telephone: (419)
(419)
425-8629
Telephone: (419) 425-8627 FAX: (419) 425-8629
BIENVENUE
Tel: 1-800-26(1-800-263-2629)
GARDEZ CES INSTRUCTIONS
15
GARDEZ CES INSTRUCTIONS
16
CARACTÉRISTIQUES
5) DÉTECTEUR RÉCEPTEUR
•
•
21
22
24
25
GARANTIE
SURWARRANTY
LIMITED
IN-HOMELIMITÉE
APPLIANCE
APPAREIL
ÉLECTROMÉNAGER
This quality product is warranted to be free from manufacturer’s
defects in material
and workmanship, provided that the unit is
used under the normal operating
conditions intended by the manufacturer.
TERMS OF WARRANTY
CONDITIONS
Plastic parts, are warranted for thirty (30) days only from purchase date, with no extensions provided.
First Year
Premiers 24 mois
During the first twelve (12) months, any functional parts of this product found to be defective, will be repaired or replaced,
at warrantor’s
option,
at no charge
to the ORIGINAL
Pendant
les premiers
24 purchaser.
mois, toutes pièces fonctionnelles de ce produit s’avèrent défectueuses, seront
réparées ou remplacées, selon le choix du garant, sans frais à l’acheteur INITIAL.
Danby reserves the right to limit the boundaries of “In Home Service” to the proximity of an Authorized Service Depot. Any app
liance
Le client
responsable
pour le
et tous
de touttoappareil
exigeant
requiring
servicesera
outside
the limited boundaries
of transport
“In Home Service”
, iles
t willfrais
be thed’expédition
consumer’s responsibility
transport the
appliance le
(at
service
au dépot
de service
autorisé
le plus
S’adresser
au“Boundaries
détaillantof qui
a vendu
ou à
their
own expense)
to the original
retailer (point
of purchase)
or aproche.
service depot
for repair. See
In Home
Serv l’appareil,
ice” below.
la station
technique
oùauthorized
les réparations
doivent
être effectuées
par un
Contact
your dealer
from whomagréée
your unitde
wasservice
purchased,laorplus
contactproche,
your nearest
Danby service
depot, where
service
technicien
Si service
les réparations
must
be performedqualifié.
by a qualified
technician. sont effectuées par quiconque autre que la station de service
agréée où à des fins commerciales, toutes les obligations de Danby en vertu de cette garantie seront
If service is performed on the units by anyone other than an authorized service depot, or the unit is used for commercial appli
cation, all
annulées.
obligations
of Danby under this warranty shall be void.
Cette
garantie
enappliance
aucunistemps
Danby
l’avarie
de lacenter
vin ou
Boundaries
of indique
If the
installedla
in aresponsabilité
location that is 100de
kilometers
(62de
miles)
or moreou
fromdommage
the nearest service
yourautre
unit contenu,
must besoit par
les
vices
de
l’appareil,
ou
soit
parl’utilisation
convenable
ou
inexacte.
In Home Service
delivered to the nearest authorized Danby Service Depot, as service must only be performed by a technician qualified and certif
ied for
warranty service by Danby. Transportation charges to and from the service location are not protected by this warranty and are t
EXCLUSIONS
responsibility of the purchaser.
he
5) Use for commercial or industrial purposes (ie. If the appliance is not installed in a domestic residence).
6) Fire,d’achat
water damage,
riot, hostility,pour
acts oftoute
God such
as hurricanes,
etc. sous garantie. Prière de garder le reçu. Pour faire
Une preuve
doittheft,
êtrewar,
présentée
demande
de floods
réparation
7) laService
calls resulting
in customer
education. à la station technique agréée ou s’adresser à:
honorer
garantie,
présenter
ce document
8) Improper Installation (ie. Building-in of a free standing appliance or using an appliance outdoors that is not approved for out
door application).
Proof of purchase date will be required for warranty claims; so, please retain bills of sale. In the event warranty service is
required, present this document to our
AUTHORIZED SERVICE DEPOT.
Service sous-garantie
En Atelier
Warranty
Service
In-home
Danby Products Limited
Danby
Products
PO
Box
1778,Limited
Guelph, Ontario, Canada N1H 6Z9
PO Box 1778, Guelph,
Canada N1H
6Z9 (519) 837-0449
Telephone:
(519)Ontario,
837-0920
FAX:
Telephone: (519) 837-0920 FAX: (519) 837-0449
1-800-263-2629
1-800-263-2629
07/13
04/09
Danby Products Inc.
DanbyU.S.A.
Products Inc.
PO Box 669, Findlay, Ohio,
45840
PO 425-8627
Box 669, Findlay,FAX:
Ohio, U.S.A.
45840
Telephone: (419)
(419)
425-8629
Telephone: (419) 425-8627 FAX: (419) 425-8629
USER’S MANUAL • MODE D’EMPLOI
FOR YOUR SAFETY: Read these instructions carefully before operating the unit.
POUR VOTRE SÉCURITÉ: Lire attentivement ces instructions avant d’utiliser l’appareil.
PORTABLE DEHUMIDIFIER
DESHUMIDIFICATEUR PORTATIF
All repair parts are available for purchase or special
order when you visit your nearest service depot.To
request service and/or the location of the service
depot nearest you, call the TOLL FREE number.
When requesting service or ordering parts, always
provide the following information:
• Product Type
• Model Number
• Part Number
• Part Description
Tel: 1-800-26(1-800-263-2629)
MODEL • MODÈLE
DDR60A4GP
• OWNER’S USE AND CARE GUIDE
• GUIDE D’UTILISATION ET SOIN DE PROPRIÈTAIRE
Printed in China
Imprimé en Chine
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages

Only pages of the document in English were displayed