PTZ Assistant
Functions management software of the IP Pan & Tilts
EN English - Instructions manual
IT Italiano - Manuale di istruzioni
FR Français - Manuel d’instructions
DE Deutsch - Bedienungslanleitung
RU Русский - Руководство по эксплуатации
PTZ Assistant
Functions management software of the IP Pan & Tilts
EN English - Instructions manual
Contents
ENGLISH
1 Identification................................................................................................................... 3
1.1 Product description and type designation..................................................................................................... 3
2 Configuration.................................................................................................................. 3
2.1 Installation................................................................................................................................................................... 3
2.2 Basic concepts........................................................................................................................................................... 3
2.3 First start-up............................................................................................................................................................... 4
2.4 Unit configuration.................................................................................................................................................... 5
2.5 Unit use........................................................................................................................................................................ 6
2.6 Call up auxiliary controls........................................................................................................................................ 6
2.7 Application settings................................................................................................................................................. 7
2.8 Notes............................................................................................................................................................................. 7
2.2 Basic concepts
1.1 Product description and type
designation
On start-up, the application is minimised in the
system's bar. Should many applications be running,
the icon can appear in the Show hidden icons panel
(Windows 7).
PTZ Assistant application was designed to restore
ONVIF auxiliary controls when these functions are not
exported by Video Management Software (VMS).
Instructions manual - English - EN
2 Configuration
2.1 Installation
The application can be installed on Windows XP or
higher. The application must be installed in desktop
mode by means of the supplied installation package
(Setup.exe).
Fig. 2
The application must be called up from the system's
bar by clicking the icon. When clicking, the main
mask appears where you can interact
The application is installed in the folder ...\Videotec\
PTZAssistant of the system's Program folder.
Depending on the version of Windows, it can be
called Program Files or Program Files (x86). This
folder only will be used for its operation.
A connection is created on the Desktop and Programs
menu, which can be called up from the Windows
Start button. It is possible to uninstall the application
from the list of installed applications from the system
control panel.
Fig. 3
Fig. 1
3
EN - English - Instructions manual The application is intended to guide the user by
means of a few icons. By means of these icons, it is
possible to carry out the main functions:
• Add a unit: Once you have selected the unit, you
must add it to the main mask by clicking the Pin
icon. The unit will switch from an Un-pinned status
to a Pinned status. The unit is now available in the
main mask.
2.3 First start-up
On first start-up, you must specify a few parameters
to configure the application. The first operation to
carry out in order to add a unit to the network is to
configure a new Administrator password.
• Unit status: The unit status is indicated by the
ON/OFF icon. The OFF icon indicates that it is not
possible to send auxiliary controls.
• User and Administrator: Operators in possession
of a User profile can send auxiliary controls to the
units. Operators in possession of an Administrator
profile can configure and add units. A password is
required to configure or add a unit, which can be
set on first start-up.
Fig. 4
Subsequent access to this menu will request the
password just configured.
Fig. 5
4
Instructions manual - English - EN
Once you have accessed the application, search
for the unit is carried out automatically in the
background. A few seconds may be required for the
system to identify the units available.
Once you have identified the units you want
available, simply confirm the choice by the relative
button and exit the mask.
Fig. 7
Fig. 6
By means of this display, it is possible to import
unit lists that were previously configured. It is also
possible to export the configuration to make it
available on other computers.
By means of the relative icon, it is possible to access
the area reserved to Administrators in order to
configure or add new units.
If you know the IP address, it is also possible to add a
unit manually.
Fig. 8
From this display, it is possible to change the
settings of each individual unit. Access is reserved to
Administrator users.
5
EN - English - Instructions manual 2.5 Unit use
2.6 Call up auxiliary controls
Click on the available units on the main screen to
access the auxiliary controls screen. (2.6 Call up
auxiliary controls, page 6). The list of auxiliary controls
is displayed in alphabetical order, however, it can also
be set up as desired via drag and drop.
This display shows the controls supported by the
unit.
It is possible to set the position of the main display.
By default in the lower right corner, or in the lower
left corner. (2.7 Application settings, page 7). The
display can be reduced in height but not in width.
The control is started by clicking the relative button.
Control reception will be confirmed by the display.
The button to access the web will display the unit's
web page.
Fig. 10
Fig. 9
6
2.7 Application settings
2.8 Notes
From this display, it is possible to configure the
language and the position of the application window.
Settings are applied immediately and are permanent.
It is possible to end an application via the Escape
button.
The application does not affect other applications
installed. The application uses runtime Microsoft .net
Framework, version 4. It is recommended to keep the
system version updated via Windows Update.
Fig. 11
VIDEOTEC is not responsible to any system
malfunction caused by installation of the application
or use of the said system by a user. VIDEOTEC is not
responsible for problems related to the use of unsafe
passwords set by the user.
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449_EN
Sommario
ITALIANO
Fig. 2
Fig. 3
Fig. 1
MNVCPTZAS_1449_IT
3
Fig. 4
Fig. 5
4
MNVCPTZAS_1449_IT
Fig. 7
Fig. 6
Fig. 8
MNVCPTZAS_1449_IT
5
Fig. 10
Fig. 9
6
MNVCPTZAS_1449_IT
Fig. 11
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449_IT
Fig. 2
Fig. 3
Fig. 1
3
Fig. 4
Fig. 5
4
Fig. 8
5
Fig. 10
Fig. 9
6
Fig. 11
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449_FR
Abb. 2
Abb. 3
Abb. 1
3
Abb. 4
Abb. 5
4
Abb. 7
Abb. 6
Abb. 8
5
Abb. 10
Abb. 9
6
Abb. 11
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449_DE
РУССКИЙ
1 Идентификация............................................................................................................. 3
1.1 Описание и назначение изделия.................................................................................................................... 3
1.1 Описание и назначение
изделия
Рис. 2
Рис. 3
Рис. 1
3
1 Идентификация
Рис. 4
Рис. 5
4
Рис. 7
Рис. 6
Рис. 8
5
Рис. 10
Рис. 9
6
2.7 Настройки приложения
2.8 Примечания
Рис. 11
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449_RU
Headquarters Italy Videotec S.p.A.
Asia Pacific Videotec (HK) Ltd
Americas Videotec Security, Inc.
Via Friuli, 6 - I-36015 Schio (VI) - Italy
Tel. +39 0445 697411 - Fax +39 0445 697414
Email: [email protected]
Flat 8, 19/F. On Dak Industrial Building, No. 2-6 Wah Sing Street
Kwai Chung, New Territories - Hong Kong
Tel. +852 2333 0601 - Fax +852 2311 0026
Email: [email protected]
Gateway Industrial Park, 35 Gateway Drive, Suite 100
Plattsburgh, NY 12901 - U.S.A.
Tel. +1 518 825 0020 - Fax +1 518 825 0022
Email: [email protected] - www.videotec.us
www.videotec.com
MNVCPTZAS_1449">