Videotec NXPTZR SERIES2, NXPTZT SERIES2, NXPTZ SERIES2 Instruction manual
PDF
Download
Document
Advertisement
Advertisement
ITALIANO NXPTZ SERIES2 (NXPTZHD) NXPTZR SERIES2 (NXPTZR) NXPTZT SERIES2 (NXPTZT) PTZ single or dual camera for marine onshore/offshore or industrial applications ENGLISH NXPTZ SERIES2 (NXPTZHD) NXPTZR SERIES2 (NXPTZR) NXPTZT SERIES2 (NXPTZT) PTZ single or dual camera for marine onshore/offshore or industrial applications EN English - Instruction manual Contents ENGLISH 1 1.1 Typographical conventions................................................................................................................................................. 7 2 Notes on copyright and information on trademarks.............................................................. 7 3 Safety rules................................................................................................................................ 7 4 Identification............................................................................................................................10 4.1 Product description and type designation..................................................................................................................10 4.2 Product marking....................................................................................................................................................................10 4.2.1 Checking the markings.........................................................................................................................................................................10 5 Versions....................................................................................................................................11 5.1 Day/Night camera.................................................................................................................................................................11 5.2 Radiometric thermal camera.............................................................................................................................................11 5.3 Dual Vision with Day/Night and radiometric thermal camera..............................................................................11 5.4 Model identification.............................................................................................................................................................12 6 Preparing the product for use................................................................................................14 6.1 Safety precautions before use..........................................................................................................................................14 6.2 Unpacking................................................................................................................................................................................14 6.3 Contents...................................................................................................................................................................................14 6.4 Safely disposing of packaging material........................................................................................................................14 6.5 Preparatory work before installation.............................................................................................................................15 6.5.1 Fixing to parapet or ceiling mount...................................................................................................................................................15 6.5.2 Bracket mounting...................................................................................................................................................................................16 6.5.3 Fixing the unit to the pole mount adapter or corner mount adapter.................................................................................16 6.5.3.1 Fixing with pole mount............................................................................................................................................................................................... 16 6.5.3.2 Fixing with corner adapter......................................................................................................................................................................................... 17 6.5.4 Sunshield mounting..............................................................................................................................................................................17 7 Installation...............................................................................................................................18 7.1 Range of use............................................................................................................................................................................18 7.2 Methods of installation.......................................................................................................................................................18 7.3 Connection of the power supply line.............................................................................................................................19 7.4 Connection of the Ethernet cable...................................................................................................................................19 7.5 Alarm and relay connections............................................................................................................................................20 7.5.1 Connecting an alarm with dry contact...........................................................................................................................................20 7.5.2 Relay connection....................................................................................................................................................................................20 7.5.3 Washing system connection...............................................................................................................................................................20 8 Switching on............................................................................................................................21 8.1 First start-up............................................................................................................................................................................21 9 Configuration...........................................................................................................................21 9.1 Default IP address.................................................................................................................................................................21 9.2 Web interface..........................................................................................................................................................................21 9.2.1 First access to the web pages.............................................................................................................................................................21 10 Accessories and Supports.....................................................................................................22 MNVCNXPTZ2_2032_EN 3 Instruction manual - English - EN 1 About this manual..................................................................................................................... 7 EN - English - Instruction manual 10.1 Washer....................................................................................................................................................................................22 10.2 Parapet or ceiling mounting bracket...........................................................................................................................22 10.3 Wall mount bracket............................................................................................................................................................22 10.4 Corner mount adaptor......................................................................................................................................................23 10.5 Pole mount adaptor...........................................................................................................................................................23 10.6 Adaptor for connection of fiber optics........................................................................................................................23 11 Instructions for normal operation.......................................................................................24 12 Maintenance..........................................................................................................................24 12.1 Routine maintenance (to be performed on a periodic basis).............................................................................24 12.1.1 Inspecting the cables..........................................................................................................................................................................24 12.2 Extraordinary maintenance (to be done only under particular circumstances)..........................................25 12.2.1 Fuses replacement...............................................................................................................................................................................25 12.2.2 Factory Default......................................................................................................................................................................................25 13 Cleaning.................................................................................................................................26 13.1 Cleaning the window........................................................................................................................................................26 13.2 Cleaning the product........................................................................................................................................................26 14 Information on disposal and recycling................................................................................26 15 Troubleshooting....................................................................................................................26 16 Technical data........................................................................................................................27 16.1 NXPTZ SERIES2 (NXPTZHD).............................................................................................................................................27 16.1.1 Mechanical..............................................................................................................................................................................................27 16.1.2 Housing's window................................................................................................................................................................................27 16.1.3 Electrical..................................................................................................................................................................................................27 16.1.4 Network...................................................................................................................................................................................................27 16.1.5 Cybersecurity.........................................................................................................................................................................................27 16.1.6 Video.........................................................................................................................................................................................................27 16.1.7 I/O interface............................................................................................................................................................................................27 16.1.8 Cameras...................................................................................................................................................................................................28 16.1.9 Environment..........................................................................................................................................................................................29 16.1.10 Certifications.......................................................................................................................................................................................29 16.1.11 Certifications - Marine applications............................................................................................................................................29 16.2 NXPTZR SERIES2 (NXPTZR)..............................................................................................................................................29 16.2.1 Mechanical..............................................................................................................................................................................................29 16.2.2 Housing's window................................................................................................................................................................................29 16.2.3 Electrical..................................................................................................................................................................................................30 16.2.4 Network...................................................................................................................................................................................................30 16.2.5 Cybersecurity.........................................................................................................................................................................................30 16.2.6 Video.........................................................................................................................................................................................................30 16.2.7 I/O interface............................................................................................................................................................................................30 16.2.8 Cameras...................................................................................................................................................................................................31 16.2.9 Environment..........................................................................................................................................................................................31 16.2.10 Certifications.......................................................................................................................................................................................31 16.2.11 Certifications - Marine applications............................................................................................................................................31 16.3 NXPTZT SERIES2 (NXPTZT)..............................................................................................................................................31 16.3.1 Mechanical..............................................................................................................................................................................................31 16.3.2 Housing's window................................................................................................................................................................................31 4 16.4 Thermal cameras.................................................................................................................................................................35 17 Technical drawings................................................................................................................37 5 Instruction manual - English - EN 16.3.3 Electrical..................................................................................................................................................................................................32 16.3.4 Network...................................................................................................................................................................................................32 16.3.5 Cybersecurity.........................................................................................................................................................................................32 16.3.6 Video.........................................................................................................................................................................................................32 16.3.7 I/O interface............................................................................................................................................................................................33 16.3.8 Cameras...................................................................................................................................................................................................33 16.3.9 Environment..........................................................................................................................................................................................34 16.3.10 Certifications.......................................................................................................................................................................................34 16.3.11 Certifications - Marine applications............................................................................................................................................34 6 EN - English - Instruction manual 1 About this manual 1.1 Typographical conventions DANGER! High level hazard. Risk of electric shock. Disconnect the power supply before proceeding with any operation, unless indicated otherwise. DANGER! Mechanical hazard. Risk of crushing or shearing. CAUTION! The electrical system to which the unit is connected must be equipped with a 20A max automatic bipolar circuit breaker. The minimum distance between the circuit breaker contacts must be 3mm (0.1in). The circuit breaker must be provided with protection against the fault current towards the ground (differential) and the overcurrent (magnetothermal). A power disconnect device must be included in the electrical installation, and it must be very quickly recognizable and operated if needed. CAUTION! Medium level hazard. This operation is very important for the system to function properly. Please read the procedure described very carefully and carry it out as instructed. CAUTION! Hazardous moving parts. Keep fingers and other body parts away. INFO Description of system specifications. We recommend reading this part carefully in order to understand the subsequent stages. CAUTION! TNV-1 installation type. The installation is type TNV-1, do not connect it to SELV circuits. 2 Notes on copyright and information on trademarks The mentioned names of products or companies are trademarks or registered trademarks. ONVIF® is a trademark of Onvif, Inc. CAUTION! Device installation and maintaining must be performed by specialist technical staff only. If it is necessary to transport the device, this should be done with great care. Abrupt stops, bumps and violent impact could damage the unit or injure the user. • The manufacturer declines all responsibility for any damage caused by an improper use of the appliances mentioned in this manual. Furthermore, the manufacturer reserves the right to modify its contents without any prior notice. The documentation contained in this manual has been collected and verified with great care. The manufacturer, however, cannot take any liability for its use. The same thing can be said for any person or company involved in the creation and production of this manual. 7 Instruction manual - English - EN Read all the documentation supplied carefully before installing and using this product. Keep the manual in a convenient place for future reference. 3 Safety rules • Before starting any operation, make sure the power supply is disconnected. EN - English - Instruction manual • Be careful not to use cables that seem worn or old. • Never, under any circumstances, make any changes or connections that are not shown in this handbook. Improper use of the appliance can cause serious hazards, risking the safety of personnel and of the installation. • Use only original spare parts. Non-original spare parts could cause fire, electrical discharge or other hazards. • Before proceeding with installation, check the supplied material to make sure it corresponds to the order specification by examining the identification labels (4.2 Product marking, page 10). • This device was designed to be permanently secured and connected on a building or on a suitable structure. The device must be permanently secured and connected before any operation. • A power disconnect device must be included in the electrical installation, and it must be very quickly recognizable and operated if needed. • This is a Class A product. In a domestic environment this product may cause radio interference. In this case the user may be required to take adequate measures. 8 • For products marked UL, powered at 24Vac, use a UL listed TNV/ES1 isolation transformer, compliant with IEC/UL 60950-1 and IEC/UL 62368-1. • Installation category (also called Overvoltage Category) specifies the level of mains voltage surges that the equipment will be subjected to. The category depends upon the location of the equipment, and on any surge voltage protection provided. Equipment in an industrial environment, directly connected to major feeders/short branch circuits, is subjected to Installation Category III. If this is the case, a reduction to Installation Category II is required. This can be achieved by use of an insulating transformer with an earthed screen between primary and secondary windings, or by fitting UL listed Surge Protective Devices (SPDs) from live to neutral and from neutral to earth. Listed SPDs shall be designed for repeated limiting of transient voltage surges and the following rated operation conditions: Type 2 (SPDs permanently connected to the power network and intended for installation on the load side of the service equipment); Nominal Discharge Current (In) 20kA min. For example: FERRAZ SHAWMUT, STT2240SPG-CN, STT2BL240SPG-CN rated 120Vac/240Vac, (In=20kA). Maximum distance between installation and reduction is 5m. • Equipment intended for installation in Restricted Access Location performed by specialist technical staff. • The safety earthing system must be carried out according to local installation dispositions. • The separate protective earthing terminal provided on this product shall be permanently connected to earth. • For continued protection against risk of fire, replace only with same type and rating of fuse. Fuses must be replaced only by service personnel. • Connect the device to a power source corresponding to the indications given on the marking label. Before proceeding with installation make sure that the power line is properly isolated. The supply voltage should never exceed the limit (±10%). • The appliance includes moving parts. Make sure that the unit is positioned where it is inaccessible under normal operating conditions. Attach the warning label supplied with the appliance, placing it near the unit so that it can be seen easily. • Do not use the appliance in the presence of inflammable substances. • Only skilled personnel should carry out maintenance on the device. When carrying out maintenance, the operator is exposed to the risk of electrocution and other hazards. • Use only the accessories indicated by the manufacturer. Any change that is not expressly approved by the manufacturer will invalidate the guarantee. • Before connecting all the cables make sure the device is properly connected to the earth circuit. • If the device has to be removed from the installation, always disconnect the earth cable last. • Take all necessary precautions to prevent the apparatus from being damaged by electrostatic discharge. • Handle the unit with great care, high mechanical stress could damage it. • Make especially sure that the power supply line is insulated at a sufficient distance from all the other cables, including lightning protection devices. 9 Instruction manual - English - EN • To comply with the main supply voltage dips and short interruption requirements, use a suitable Uninterruptable Power Supply (UPS) to power the unit. • Attach the Dangerous Moving Parts label near the device. (Fig. 5, page 14). EN - English - Instruction manual 4.2 Product marking 4.1 Product description and type designation The product has a label applied in compliance with CE marking. PTZ single or dual camera for marine onshore/ offshore or industrial applications. The NXPTZ SERIES2 is resistant to rust and corrosion and does not require maintenance thanks to the absolute precision of the construction process and the solid AISI 316L stainless steel construction with mirco-shot and electropolished surfaces. Fig. 1 The label shows: • Model identification code. • Supply voltage (Volt). • Frequency (Hertz). • Current consumption (Amps). • Protection degree (IP). • Serial number. 4.2.1 Checking the markings Before proceeding further with installation, make sure the material supplied corresponds to the order specification by examining the marking labels. Never, under any circumstances, make any changes or connections that are not shown in this handbook. Improper use of the appliance can cause serious hazards, risking the safety of personnel and of the installation. For more information regarding versions and product coding, please consult the relative chapter (5 Versions, page 11). 10 5 Versions 5.1 Day/Night camera Fig. 2 The dual vision version of the product is equipped with a SONY Day/Night camera and a thermal camera with radiometric or advanced radiometric functions. Fig. 4 NXPTZT SERIES2 (NXPTZT). 5.2 Radiometric thermal camera The radiometric thermal camera version of the product is equipped with a heat sensitive camera with radiometric or advanced radiometric functions. Fig. 3 11 Instruction manual - English - EN The Day/Night camera version of the product is equipped with a SONY camera or a camera with DELUX technology. 5.3 Dual Vision with Day/Night and radiometric thermal camera EN - English - Instruction manual 12 Tab. 1 Camera Revision 1 230Vac 1 Videotec super low-light Day/ VW0Z0 Night 30X zoom, Full HD camera 0 Without integrated video analytics (without VIDEOTEC ANALYTICS) C Complies with ONVIF, Profile Q, Profile S and Profile T 2 24Vac 2 SONY FCB-EV7520 camera, FULL HD 1080p, 30x V With integrated video analytics (VIDEOTEC ANALYTICS) J Complies with ONVIF, Profile S and Profile T 3 120Vac Tab. 2 Thermal Camera 1 230Vac Y Thermal camera 50mm, 336x256 0 Thermal camera with radiometric functions 2 24Vac A Thermal camera 35mm, 336x256 R Thermal camera with advanced radiometric functions 3 120Vac B Thermal camera 25mm, 336x256 V Thermal camera 19mm, 336x256 F Thermal camera 13mm, 336x256 C Thermal camera 9mm, 336x256 W Thermal camera 50mm, 640x512 D Thermal camera 35mm, 640x512 E Thermal camera 25mm, 640x512 U Thermal camera 19mm, 640x512 G Thermal camera 13mm, 640x512 H Thermal camera 9mm, 640x512 0Z00 Revision Frequency C Complies with ONVIF, Profile Q, Profile S and Profile T - 7.5Hz J Complies with ONVIF, Profile S and Profile T H 30Hz NXPTZT SERIES2 - CONFIGURATION OPTIONS NXPTZT Tab. 3 Voltage Day/Night camera Thermal camera 1 230Vac 2 Y Thermal camera 50mm, 336x256 W Thermal camera with radiometric functions 2 24Vac A Thermal camera 35mm, 336x256 R Thermal camera with advanced radiometric functions 3 120Vac B Thermal camera 25mm, 336x256 V Thermal camera 19mm, 336x256 F Thermal camera 13mm, 336x256 C Thermal camera 9mm, 336x256 W Thermal camera 50mm, 640x512 D Thermal camera 35mm, 640x512 E Thermal camera 25mm, 640x512 U Thermal camera 19mm, 640x512 G Thermal camera 13mm, 640x512 H Thermal camera 9mm, 640x512 SONY FCB-EV7520 camera, FULL HD 1080p, 30x Revision Frequency C Complies with ONVIF, Profile Q, Profile S and Profile T - 7.5Hz J Complies with ONVIF, Profile S and Profile T H 30Hz 13 Instruction manual - English - EN EN - English - Instruction manual 6 Preparing the product for use Any change that is not expressly approved by the manufacturer will invalidate the guarantee. 6.1 Safety precautions before use The appliance includes moving parts. Make sure that the unit is positioned where it is inaccessible under normal operating conditions. Attach the warning label supplied with the appliance, placing it near the unit so that it can be seen easily. 6.2 Unpacking When the product is delivered, make sure that the package is intact and that there are no signs that it has been dropped or scratched. If there are obvious signs of damage, contact the supplier immediately. When returning a faulty product we recommend using the original packaging for shipping. Keep the packaging in case you need to send the product for repairs. 6.3 Contents Check the contents to make sure they correspond with the list of materials as below: • Positioning unit • Sunshield (2 sunshields in the double camera version) • Bolts and screws • Wash system kit • Label (CAUTION: Hazardous moving parts) • Allen wrench • Instruction manual Fig. 5 6.4 Safely disposing of packaging material The packaging material can all be recycled. The installer technician will be responsible for separating the material for disposal, and in any case for compliance with the legislation in force where the device is to be used. 14 6.5 Preparatory work before installation Use appropriate tools for the installation. The particular nature of the site where the device is to be installed may mean special tools are required for installation. Choose an installation surface that is strong enough to sustain the weight of the device, also bearing in mind particular environmental aspects, such as exposure to strong winds. It should be installed so that no one can be hit by moving parts. It should be installed so that moving parts cannot hit other objects and create hazardous situations. For ceiling assembly, the Ceiling Assembly mode must be enabled using the web interface (Web Interface manual, Motion Parameters Page). Fix the adaptor (01) to the bottom of the unit using the 4 flat countersunk screws (02) with hexagonal socket M10x20mm in stainless steel (A4 class 70) supplied. Make sure the thread are free of dirt and debris. Apply a generous amount of thread locking compound (Loctite 270) into the threaded holes in the base of the device. Pay attention to the fixing. Tightening torque: 35Nm. The thread compound must cure for one hour, allow for this period prior to completing the installation. 02 01 Make sure the appliance is securely anchored before supplying power. For technical services, consult only and exclusively authorized technicians. Fig. 6 Use the external holes in the adapter to fix the assembled unit to the parapet or to the ceiling. Use screws that can bear at least 4 times the weight of the unit. 0 Since the user is responsible for choosing the surface to which the unit is to be anchored, we do not supply the fixing devices for attaching the unit firmly to the particular surface. The installer is responsible for choosing fixing devices suitable for the specific purpose on hand. Ø 20 It is possible to install the unit with several brackets. 35° 35° We strongly recommend using only approved brackets and accessories during installation. 35° 35° 8 Ø 11 Ø 238 Fig. 7 15 Instruction manual - English - EN CAUTION! Device installation and maintaining must be performed by specialist technical staff only. 6.5.1 Fixing to parapet or ceiling mount The bracket can be fixed to the vertical wall. Use screws and wall fixing devices that can bear at least four times the weight of the unit. Fasten the device to the bracket by using 4 flat washers, 4 serrated stainless steel washers and 4 stainless steel hex head screws (A4 class 70) M10x20mm supplied. Make sure the thread are free of dirt and debris. Apply a generous amount of thread locking compound (Loctite 270) on the 4 screws. Tighten the screws. Pay attention to the fixing. Tightening torque: 35Nm. The thread compound must cure for one hour, allow for this period prior to completing the installation. 6.5.3 Fixing the unit to the pole mount adapter or corner mount adapter To install the product on a pole or at a wall corner, first of all fix the unit to the wall bracket (6.5.2 Bracket mounting, page 16). 6.5.3.1 Fixing with pole mount To fix the wall support bracket to the pole sling, use the 4 flat washers, the 4 grower washers in stainless steel and the 4 hexagonal head screws in stainless steel (A4 class 70) M10x30mm supplied. Make sure the thread are free of dirt and debris. Apply a generous amount of threadlocker (Loctite 270) on the 4 threaded holes on the pole mount adapter. Tighten the screws. Pay attention to the fixing. Tightening torque: 35Nm. The thread compound must cure for one hour, allow for this period prior to completing the installation. Fig. 8 Fig. 10 Ø11 90 EN - English - Instruction manual 6.5.2 Bracket mounting 150 Fig. 9 16 6.5.4 Sunshield mounting To fix the wall support bracket to the corner adaptor module, use the 4 flat washers, the 4 grower washers in stainless steel and the 4 hexagonal head screws in stainless steel (A4 class 70) M10x30mm supplied. You can fix the sunshield to the housing using the screws supplied. Make sure the thread are free of dirt and debris. Apply a generous amount of thread locking compound (Loctite 270) into the threaded holes in the base of the device. Apply a generous amount of threadlocker (Loctite 270) on the 4 threaded holes on the corner module. Tighten the screws. Pay attention to the fixing. Tightening torque: 35Nm. Pay attention to the fixing. Tightening torque: 2Nm. The thread compound must cure for one hour, allow for this period prior to completing the installation. The thread compound must cure for one hour, allow for this period prior to completing the installation. Fig. 12 Fig. 11 17 Instruction manual - English - EN 6.5.3.2 Fixing with corner adapter 7 Installation EN - English - Instruction manual CAUTION! Device installation and maintaining must be performed by specialist technical staff only. Before starting any operation, make sure the power supply is disconnected. 7.2 Methods of installation The system can be installed only in a standard or inverted position (ceiling mount). When installed for inverted operation, the camera orientation and controller functions are reconfigured for normal operation through the system’s software. Hardware adjustment is not required for inverted operation. At start up the system makes some automatic calibration movements: do not stand near the device when it is powered. VIDEOTEC strongly recommend to test the device configuration and performance before putting it in the final installation site. The product is equipped with a multicore cable that allows connections to be made. 7.1 Range of use Fig. 13 Installation temperature: from -40°C (-40°F) up to +65°C (149°F). Operating temperature: from -40°C (-40°F) up to +65°C (149°F). 18 7.3 Connection of the power supply line 7.4 Connection of the Ethernet cable When commencing installation make sure that the specifications for the power supply for the installation correspond with those required by the device. Check that the power supply socket and cable are adequately dimensioned. Depending on the version, the device can be provided with different power supply voltages. The power supply voltage is indicated on the product identification label. (4.2 Product marking, page 10). The multicore cable has the power and earth cables inside. Perform the connections following the instructions reported in the table . CONNECTION OF THE POWER SUPPLY LINE Cable color The Ethernet cable shield on the operator side must always be earthed via the connector. Use a shielded RJ45 connector for the crimping of the Ethernet cable. Carry out the connections as described in the table (according to the standard specifications: TIA/EIA568-B). CONNECTION OF THE ETHERNET CABLE Pin number Cable color 1 2 Orange 3 Green-White 4 Blue 5 Blue-White 6 Green 7 Brown-White 8 Brown Tab. 5 The example below shows a typical installation. Power supply 24Vac Black 2 Black 1 (L) Phase Yellow/Green Safety earth Power supply 230Vac Black 2 Black 1 (L) Phase Yellow/Green Safety earth Personal Computer Switch Power supply 120Vac Black 2 Black 1 (L) Phase Yellow/Green Safety earth Tab. 4 Fig. 14 19 Instruction manual - English - EN Electrical connections must be performed with the power supply disconnected and the circuit-breaker open. EN - English - Instruction manual 7.5 Alarm and relay connections The unit is equipped with the alarms and relays indicated in the table. ALARM AND RELAY CONNECTIONS The dry contact alarm can be NO (normally open) or NC (normally closed). For further information refer to the relative chapter (Web Interface manual, Digital I/O Page). All alarms have a reach of 200m (656ft) max, which can be obtained using a shielded cable with a minimum section of 0.25mm² (23AWG). Cable color Red-Blue Relay 1, A Grey-Pink Relay 1, B Brown-Green Relay 2, A White-Green Relay 2, B Green Common alarm, COM Brown Alarm 1 (dry contact), AL1 White-Yellow Reset input power supply Black 7.5.2 Relay connection Tab. 6 Electrically disconnect all the cables not connected and not listed on the table because they have no function. 7.5.1 Connecting an alarm with dry contact For a dry contact alarm (alarm AL1), implement the connection as shown in the figure. The relay can be used with the specifications outlined below. Working voltage: up to 30Vac or 60Vdc. Current: 1A max. Use suitable cable sections with the following characteristics: from 0.25mm² (23AWG) up to 1.5mm² (15AWG). Due to the absence of polarity, both terminals of the same relay can be connected either to alternating or direct current voltages. 7.5.3 Washing system connection For further details on configuration and use, refer to the relative manual. When the washing system is enabled, the relay 2 report the pump activation (7.5 Alarm and relay connections, page 20). About the configuration please refer to the relative manual (9.2 Web interface, page 21). AL1 COM Dry contact Fig. 15 20 8 Switching on The unit is switched on by connecting the power supply. To switch off the unit disconnect the power. 8.1 First start-up Make sure that the unit and other components of the installation are closed so that it is impossible to come into contact with live parts. Make sure that all parts are fastened down firmly and safely. 9.1 Default IP address The unit is configured to obtain an IP address from a DHCP server. The IP address acquired via DHCP is visible in the DHCP server log file. If the DHCP server is not available, the unit automatically configures itself with a self-generated IP address in the 169.254.x.x/16 subnet. Configuring the IP address of the PC as belonging to the same subnet (example: IP address: 169.254.1.1, subnet mask: 255.255.0.0). Use an ONVIF compliant VMS or a network sniffer to find the IP address of the device (IP scan utility). 9.2 Web interface Browsers supported (the latest version): Microsoft Edge, Google Chrome, Mozilla Firefox. 9.2.1 First access to the web pages The first operation in configuring the device consists in connecting to the web interface. To access the web interface of the product, simply use a browser to connect to http://ip_address. On first access, the Home page will be displayed. To configure the web interface, consult the manual relating to the firmware version installed, available on the product web page of the website www.videotec. com. 21 Instruction manual - English - EN The automatic pre-heating (De-Ice) process could be started whenever the device is switched on and the ambient temperature is below 0°C (+32°F). The procedure is necessary to guarantee correct operation of the devices even at low temperatures. The duration ranges depending on environmental conditions (from 60 minutes up to 120 minutes). EN - English - Instruction manual 10 Accessories and Supports For further details on configuration and use, refer to the manual of the relevant accessory or support. 10.2 Parapet or ceiling mounting bracket 10.1 Washer The product can be equipped with an external pump that provides water to clean the glass. To complete the installation of the washer use the kit supplied. Fig. 17 NXPTZTW. 10.3 Wall mount bracket Wall mount bracket. Fig. 16 For further information refer to the relative chapter (9.2 Web interface, page 21). Fig. 18 22 NXPTZWB. 10.4 Corner mount adaptor Corner mount adaptor. 10.6 Adaptor for connection of fiber optics Fig. 21 Fig. 19 Instruction manual - English - EN Adaptor for connection of fiber optics. NXPTZSFP. NXPTZCW. 10.5 Pole mount adaptor Pole mount adaptor. Fig. 20 NXPTZCOL. 23 EN - English - Instruction manual 11 Instructions for normal operation Do not use the wiper if the outside temperature is below 0°C (+32°F) or in case of ice. If it is left on, the wiper automatically disables itself. 12 Maintenance Before doing any technical work on the device, disconnect the power supply. CAUTION! Device installation and maintaining must be performed by specialist technical staff only. • Through the user's controls of the web interface ( 9.2 Web interface, page 21). The manufacturer declines all liability for damage to any of the apparatus mentioned in this handbook, when resulting from tampering, use of non-original spare parts, installation, maintenance and repairs performed by non-authorised, non-skilled personnel. • Through Video Management Software (VMS) that supports the ONVIF protocol. In this case the Special controls are implemented using the auxiliary commands of the ONVIF protocol. For damage to any parts, repair or replacement must be done by, or under supervision of VIDEOTEC. The device control can be performed through different modes. • Through PTZ Assistant software (the PTZ Assistant software is available to download on the product web page of the website www.videotec.com). Whenever replacing the parts as indicated, always use VIDEOTEC original spare parts and meticulously follow the maintenance instructions supplied with every spare parts kit. For all maintenance interventions, we recommend you return the product to the laboratory that will perform all required operations. When contacting VIDEOTEC for assistance please provide the serial number and the identification code of the model. 12.1 Routine maintenance (to be performed on a periodic basis) 12.1.1 Inspecting the cables The cables should not show signs of damage or wear, which could generate hazardous situations. In this case extraordinary maintenance is necessary. 24 12.2 Extraordinary maintenance (to be done only under particular circumstances) F2 Instruction manual - English - EN F1 Maintenance must be performed with the power supply disconnected and the circuitbreaker open. CAUTION! For continued protection against risk of fire, replace only with same type and rating of fuse. Fuses must be replaced only by service personnel. If necessary, the connector board's fuses can be replaced inside the connection compartment. Unscrew the screws and remove the cover. Fig. 23 At the end of the operations close the product. Pay attention to the fixing. Tightening torque: 1.5Nm (±0.2Nm). 12.2.2 Factory Default If the access password is no longer available, follow the procedure to reset to default factory settings. To restore the factory settings relative to the network, user access and camera configuration follow this procedure: • Switch off the unit. • Use a clean contact to connect the reset (black cable) signal and the relative power supply (whiteyellow cable). • Power the unit. • Wait for 2 minutes. Fig. 22 • Switch off the unit. The new fuses must comply with the directions given in the table. • Open the contact between the reset and the relevant power supply. • Power the unit. Supply voltage 24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20 120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 230Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 Once the factory default procedure has terminated, you need to configure the unit as described in the relevant chapter (9.1 Default IP address, page 21). Tab. 7 25 EN - English - Instruction manual 13 Cleaning 15 Troubleshooting Frequency will depend on the type of environment in which the product is used. Contact an authorized support centre if the problems listed below persist or you have any other issues that are not described here. 13.1 Cleaning the window Avoid ethyl alcohol, solvents, hydrogenated hydrocarbide, strong acid and alkali. Such products may irreparably damage the surface. PROBLEM The product does not go on. CAUSE Wiring error, blown fuse. Make sure the connections are correct. Check the continuity of the fuses and replace them with the indicated models should they fail. PROBLEM The shooting area do not correspond to the selected preset position. CAUSE Loss of absolute position reference point. Run the device calibration procedure or reset the unit by rebooting it. PROBLEM The device does not move during the start-up phase. CAUSE The ambient temperature is too low. Wait until the end of the preheating procedure. The following message is displayed on the web page: De-Ice procedure in progress. We recommend using a soft cloth with neutral soap diluted with water or specific products to clean the glasses lenses. 13.2 Cleaning the product The device should be cleaned using a damp cloth; compressed air must not be used. 14 Information on disposal and recycling The European Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE) mandates that these devices should not be disposed of in the normal flow of municipal solid waste, but they should be collected separately in order to optimize the recovery stream and recycling of the materials that they contain and to reduce the impact on human health and the environment due to the presence of potentially hazardous substances. The symbol of the crossed out bin is marked on all products to remember this. The waste may be delivered to appropriate collection centers, or may be delivered free of charge to the distributor where you purchased the equipment at the time of purchase of a new equivalent or without obligation to a new purchase for equipment with size smaller than 25cm (9.8in). For more information on proper disposal of these devices, you can contact the responsible public service. 26 16.1.5 Cybersecurity Password restricted access (HTTP digest) AISI 316L stainless steel construction External surfaces micro-shot peened in silicon and electro-polished Dynamic positioning control system Support of various user access levels Control of accesses IEEE 802.1X HTTPS cryptography using TLS1.0, TLS1.1, TLS1.2 and TLS1.3 Centralised certificate management Zero backlash Complies with ONVIF Security Service specifications Pre-wired multipolar cable (3m (9.8ft), different lengths are available on request) 16.1.6 Video Horizontal rotation: 360°, continuous rotation Vertical rotation: from -90° up to +90° Horizontal speed (variable): from 0.1°/s up to 100°/s Tilt speed (variable): from 0.1°/s up to 100°/s Accuracy of preset positions: 0.02° Integrated wiper Unit weight: 22kg (44lb) Video encoder • Communication protocol: ONVIF, Profile Q, Profile S and Profile T • Device configuration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WS-DISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast 16.1.2 Housing's window Glass window extra clear • 3 independent video streams Full HD • Thick: 5mm (0.2in) 16.1.3 Electrical Supply voltage/Current consumption: • Image resolution: from 320x180pixel up to 1920x1080pixel in 6 steps • Selectable frame rate from 1 to 60 images per second (fps) • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • Directional OSD (maximum 4 settable areas) • 24Vac ±10%, 5A max, 50/60Hz • Motion Detection Power consumption: • 120W max • 30W, P&T static, heating switched off 16.1.4 Network RJ45 port • Ethernet connection: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Ethernet connection:100BASE-FX • Supply voltage: 3.3V • Standard: compliant MSA The SFP module (not supplied by VIDEOTEC) must meet the following requirements: • Video analytics: VIDEOTEC ANALYTICS (optional) • QoS: Differentiated DSCPs for streaming and device management • SNMP and NTCIP protocols 16.1.7 I/O interface I/O alarm board: • Alarm inputs: 1 • Relay outputs: 1+1 (1 relay reserved for washer pump and one configurable, 1A, 30Vac/60Vdc max) Input for remote reset: 1 • Laser: Class 1, complies with EN60825-1 • Certification: UL/IEC 60950-1 or UL/IEC 62368-1 27 Instruction manual - English - EN 16.1.1 Mechanical Digitally signed firmware EN - English - Instruction manual 16.1.8 Cameras Day/Night Full HD 30x DELUX SONY FCB-EV7520 Day/Night Full HD 30x Resolution: Full HD 1080p (1920x1080) Image Sensor: 1/2.8" Exmor™ R CMOS sensor Image Sensor: 1/2.8" Exmor™ R CMOS sensor Effective Pixels: approx. 2.38 Megapixels Effective Pixels: approx. 2.13 Megapixels Minimum Illumination: Minimum Illumination: • Colour: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) • Colour: 0.006lx (F1.6, 30 IRE) • B/W: 0.0006lx (F1.6, 30 IRE) Focal length: from 4.5mm (wide) up to 135mm (tele) Focal length: from 4.3mm (wide) up to 129mm (tele) Zoom: 30x (480x with digital zoom) Zoom: 30x (360x with digital zoom) Iris: from F1.6 up to F9.6 (Auto, Manual) Iris: from F1.6 up to F14 (Auto, Manual) Horizontal Viewing Angle: from 61.6° (wide end) up to 2.50° (tele end) Horizontal Viewing Angle: from 63.7° (wide end) up to 2.3° (tele end) Vertical Viewing Angle: from 38.5° (wide end) up to 1.3° (tele end) Shutter speed: from 1/1s up to 1/10000s (Auto, Manual) White balance: Auto, Auto Tracing, Indoor, Outdoor, Manual, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Gain: from 0dB up to 50.0dB (Auto, Manual) Wide Dynamic Range: 120dB Focus System: Auto (PTZ Trigger, Full Auto), Manual Vertical Viewing Angle: from 37.07° (wide end) up to 1.44° (tele end) Shutter speed: from 1/1s up to 1/10000s (Auto, Manual) White balance: Auto, Manual Gain: from 0dB up to 100dB (Auto, Manual) Wide Dynamic Range: 120dB Focus System: Auto, Manual, Trigger Picture Effects: E-flip, Color enhancement Noise removal: 2D (3 levels), 3D (3 levels) Picture Effects: E-flip Exposure Control: Auto, Manual, Priority (Iris Priority, Shutter Priority), Brightness, Custom Noise removal (2D, 3D): Off, On (from level 1 up to level 5) De-fog: On/Off Exposure Control: Auto, Manual, Priority (Shutter priority, Iris priority, Brightness priority) Privacy zones masking (maximum 8 settable masks) De-fog: Off, Low, Mid, High Dynamic masking of privacy zones: maximum 24 masks settable, maximum 8 simultaneously displayable Indoor Flicker Reduction Gain Limit: from10.7dB up to 50dB High sensitivity: On/Off Backlight Compensation: On/Off Auto Slowshutter: On/Off Exposure compensation: Off, On (from -10.5dB up to +10.5dB) Sharpness: from level 0 up to level 15 High Light Compensation (HLC): Off, Low, Mid, High, Masking Level (Off, On, from level 1 up to level 15) Digital image stabilization: On/Off 28 16.1.9 Environment For indoors and outdoors installation Operating temperature • Temperature test complies with NEMA-TS 2-2003 (R2008) par. 2.1.5.1, test profile fig. 2-1 (from -34°C (-29.2°F) to +74°C (165.2°F)) (not valid for versions with VIDEOTEC ANALYTICS) • De-icing function intervention (cold start): from -40°C (-40°F) up to -10°C (14°F) 16.2.1 Mechanical AISI 316L stainless steel construction Instruction manual - English - EN • Continuous working: from -40°C (-40°F) up to +65°C (149°F) External surfaces micro-shot peened in silicon and electro-polished Dynamic positioning control system Zero backlash Pre-wired multipolar cable (3m (9.8ft), different lengths are available on request) Horizontal rotation: 360°, continuous rotation Relative humidity: from 5% up to 95% Vertical rotation: from -90° up to +90° Horizontal speed (variable): from 0.1°/s up to 100°/s Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1 Tilt speed (variable): from 0.1°/s up to 100°/s Electromagnetic compatibility (CE): EN50130-4, EN55032 (Class A), EN61000-6-4, EN61000-3-2, EN61000-3-3 Unit weight: 22kg (44lb) Outdoor installation (CE): EN60950-22, ICE60950-22 IP protection degree (EN/IEC60529): IP66, IP67, IP68, IP69 Accuracy of preset positions: 0.02° 16.2.2 Housing's window • Thick: 1.5mm (0,06in) UL certification (UL60950-1, CAN/CSA C22.2 No. 60950-1-07, UL62368-1, CAN/CSA C22.2 No. 62368-114): cULus Listed (only for 24Vac version) • External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection Electromagnetic compatibility (North America): FCC part 15 (Class A), ICES-003 (Class A) • Spectral range: from 7.5μm up to 14μm Level of protection Type (UL50E): 4X (only for 24Vac version) EAC certification Restriction of Hazardous Substances (RoHS), Directive 2011/65/EU: EN50581 Waste Electrical and Electronic Equipment (WEEE), Directive 2012/19/EU 16.1.11 Certifications - Marine applications Lloyd's Register Marine Type Approval certification (the 24Vac and 120Vac versions require a filter accessory FM1010): • Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) • Internal treatment: antireflection • Medium transmittance (from 7.5μm up to 11.5μm): 91.2% • Medium transmittance (from 11.5μm up to 14μm): 80.9% Germanium window (50mm lens) • Thick: 2mm (0.08in) • External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection • Internal treatment: antireflection • Spectral range: from 7.5μm up to 14μm • Medium transmittance (from 7.5μm up to 11.5μm): 90% • Medium transmittance (from 11.5μm up to 14μm): 77% Electromagnetic compatibility: EN60945 Salty fog resistance: EN60068-2-52 Tested at 70°C (158°F) for 16 hours in compliance with EN60068-2-2 29 16.2.3 Electrical 16.2.6 Video Supply voltage/Current consumption: Video encoder EN - English - Instruction manual • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz Power consumption: • 120W max • 30W, P&T static, heating switched off 16.2.4 Network RJ45 port • Ethernet connection: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Ethernet connection:100BASE-FX • Communication protocol: ONVIF, Profile Q, Profile S and Profile T, ONVIF Thermal Service • Device configuration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast • Video compression: H.264/AVC, MJPEG, JPEG, MPEG4 • 3 independent video streams • Image resolution: from 320x180pixel up to 720x480pixel in 4 steps • Supply voltage: 3.3V • Selectable frame rate from 1 to 30 images per second (fps) • Standard: compliant MSA The SFP module (not supplied by VIDEOTEC) must meet the following requirements: • Laser: Class 1, complies with EN60825-1 • Certification: UL/IEC 60950-1 or UL/IEC 62368-1 16.2.5 Cybersecurity • Directional OSD (maximum 4 settable areas) • Motion Detection • QoS: Differentiated DSCPs for streaming and device management • SNMP and NTCIP protocols Digitally signed firmware 16.2.7 I/O interface Password restricted access (HTTP digest) I/O alarm board: Support of various user access levels • Alarm inputs: 1 Control of accesses IEEE 802.1X • Relay outputs: 1+1 (1 relay reserved for washer pump and one configurable, 1A, 30Vac/60Vdc max) HTTPS cryptography using TLS1.0, TLS1.1, TLS1.2 and TLS1.3 Centralised certificate management Input for remote reset: 1 Complies with ONVIF Security Service specifications 30 16.2.8 Cameras Please refer to the relevant table (16.4 Thermal cameras, page 35). For indoors and outdoors installation Operating temperature 16.3.1 Mechanical AISI 316L stainless steel construction External surfaces micro-shot peened in silicon and electro-polished • Continuous working: from -40°C (-40°F) up to +65°C (149°F) Dynamic positioning control system • Temperature test complies with NEMA-TS 2-2003 (R2008) par. 2.1.5.1, test profile fig. 2-1 (from -34°C (-29.2°F) to +74°C (165.2°F)) Pre-wired multipolar cable (3m (9.8ft), different lengths are available on request) • De-icing function intervention (cold start): from -40°C (-40°F) up to -10°C (14°F) Instruction manual - English - EN Zero backlash Horizontal rotation: 360°, continuous rotation Vertical rotation: from -90° up to +90° Relative humidity: from 5% up to 95% Horizontal speed (variable): from 0.1°/s up to 100°/s Tilt speed (variable): from 0.1°/s up to 100°/s Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1 Accuracy of preset positions: 0.02° Integrated wiper Electromagnetic compatibility (CE): EN61000-6-4, EN61000-3-2, EN61000-3-3, EN50130-4, EN55032 (Class A) Unit weight: 24kg (53lb) Outdoor installation (CE): EN60950-22, ICE60950-22 IP protection degree (EN/IEC60529): IP66, IP67, IP68, IP69 UL certification (UL60950-1, CAN/CSA C22.2 No. 60950-1-07, UL62368-1, CAN/CSA C22.2 No. 62368-114): cULus Listed (only for 24Vac version) Electromagnetic compatibility (North America): FCC part 15 (Class A), ICES-003 (Class A) Level of protection Type (UL50E): 4X (only for 24Vac version) 16.3.2 Housing's window Glass window extra clear • Thick: 5mm (0.2in) Germanium window (9mm, 13mm, 19mm, 25mm, 35mm lenses) • Thick: 1.5mm (0,06in) • External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection • Internal treatment: antireflection • Spectral range: from 7.5μm up to 14μm • Medium transmittance (from 7.5μm up to 11.5μm): 91.2% Restriction of Hazardous Substances (RoHS), Directive 2011/65/EU: EN50581 • Medium transmittance (from 11.5μm up to 14μm): 80.9% Waste Electrical and Electronic Equipment (WEEE), Directive 2012/19/EU Germanium window (50mm lens) • Thick: 2mm (0.08in) 16.2.11 Certifications - Marine applications • External treatment: antiscratch (Hard Carbon Coating - DLC), antireflection Lloyd's Register Marine Type Approval certification (the 24Vac and 120Vac versions require a filter accessory FM1010): • Internal treatment: antireflection • Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) Electromagnetic compatibility: EN60945 • Spectral range: from 7.5μm up to 14μm • Medium transmittance (from 7.5μm up to 11.5μm): 90% • Medium transmittance (from 11.5μm up to 14μm): 77% Salty fog resistance: EN60068-2-52 Tested at 70°C (158°F) for 16 hours in compliance with EN60068-2-2 31 16.3.3 Electrical 16.3.6 Video Supply voltage/Current consumption: Day/Night camera EN - English - Instruction manual • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz Power consumption: • 120W max • 30W, P&T static, heating switched off 16.3.4 Network RJ45 port • Ethernet connection: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Ethernet connection:100BASE-FX • Supply voltage: 3.3V • Standard: compliant MSA The SFP module (not supplied by VIDEOTEC) must meet the following requirements: • Laser: Class 1, complies with EN60825-1 • Certification: UL/IEC 60950-1 or UL/IEC 62368-1 Video encoder • Communication protocol: ONVIF, Profile Q, Profile S and Profile T • Device configuration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WS-DISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast • Video compression: H.264/AVC, MJPEG, JPEG, MPEG4 • 3 independent video streams Full HD • Image resolution: from 320x180pixel up to 1920x1080pixel in 6 steps • Selectable frame rate from 1 to 60 images per second (fps) • Web Server • Directional OSD (maximum 4 settable areas) • Motion Detection 16.3.5 Cybersecurity • QoS: Differentiated DSCPs for streaming and device management Digitally signed firmware • SNMP and NTCIP protocols Password restricted access (HTTP digest) Support of various user access levels Control of accesses IEEE 802.1X HTTPS cryptography using TLS1.0, TLS1.1, TLS1.2 and TLS1.3 Centralised certificate management Complies with ONVIF Security Service specifications 32 Thermal Camera Zoom: 30x (360x with digital zoom) Video encoder Iris: from F1.6 up to F14 (Auto, Manual) Horizontal Viewing Angle: from 63.7° (wide end) up to 2.3° (tele end) • Device configuration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS Vertical Viewing Angle: from 38.5° (wide end) up to 1.3° (tele end) • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast Shutter speed: from 1/1s up to 1/10000s (Auto, Manual) White balance: Auto, Auto Tracing, Indoor, Outdoor, Manual, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) • 3 independent video streams Gain: from 0dB up to 50.0dB (Auto, Manual) • Image resolution: from 320x180pixel up to 720x480pixel in 4 steps Wide Dynamic Range: 120dB • Selectable frame rate from 1 to 30 images per second (fps) Picture Effects: E-flip • Web Server • Directional OSD (maximum 4 settable areas) • Motion Detection • QoS: Differentiated DSCPs for streaming and device management • SNMP and NTCIP protocols 16.3.7 I/O interface I/O alarm board: • Alarm inputs: 1 • Relay outputs: 1+1 (1 relay reserved for washer pump and one configurable, 1A, 30Vac/60Vdc max) Input for remote reset: 1 16.3.8 Cameras SONY FCB-EV7520 Day/Night Full HD 30x Resolution: Full HD 1080p (1920x1080) Image Sensor: 1/2.8" Exmor™ R CMOS sensor Effective Pixels: approx. 2.13 Megapixels Minimum Illumination: Focus System: Auto (PTZ Trigger, Full Auto), Manual Noise removal (2D, 3D): Off, On (from level 1 up to level 5) Exposure Control: Auto, Manual, Priority (Shutter priority, Iris priority, Brightness priority) De-fog: Off, Low, Mid, High Dynamic masking of privacy zones: maximum 24 masks settable, maximum 8 simultaneously displayable Indoor Flicker Reduction Gain Limit: from10.7dB up to 50dB High sensitivity: On/Off Backlight Compensation: On/Off Auto Slowshutter: On/Off Exposure compensation: Off, On (from -10.5dB up to +10.5dB) Sharpness: from level 0 up to level 15 High Light Compensation (HLC): Off, Low, Mid, High, Masking Level (Off, On, from level 1 up to level 15) Digital image stabilization: On/Off Thermal cameras Please refer to the relevant table (16.4 Thermal cameras, page 35). • Colour: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) Focal length: from 4.3mm (wide) up to 129mm (tele) 33 Instruction manual - English - EN • Communication protocol: ONVIF, Profile Q, Profile S and Profile T, ONVIF Thermal Service 16.3.9 Environment For indoors and outdoors installation EN - English - Instruction manual Operating temperature • Continuous working: from -40°C (-40°F) up to +65°C (149°F) • Temperature test complies with NEMA-TS 2-2003 (R2008) par. 2.1.5.1, test profile fig. 2-1 (from -34°C (-29.2°F) to +74°C (165.2°F)) • De-icing function intervention (cold start): from -40°C (-40°F) up to -10°C (14°F) Relative humidity: from 5% up to 95% 16.3.11 Certifications - Marine applications Lloyd's Register Marine Type Approval certification (the 24Vac and 120Vac versions require a filter accessory FM1010): • Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) Electromagnetic compatibility: EN60945 Salty fog resistance: EN60068-2-52 Tested at 70°C (158°F) for 16 hours in compliance with EN60068-2-2 16.3.10 Certifications Electrical safety (CE): EN60950-1, IEC60950-1, EN62368-1, IEC62368-1 Electromagnetic compatibility (CE): EN61000-6-4, EN61000-3-2, EN61000-3-3, EN50130-4, EN55032 (Class A) Outdoor installation (CE): EN60950-22, ICE60950-22 IP protection degree (EN/IEC60529): IP66, IP67, IP68, IP69 UL certification (UL60950-1, CAN/CSA C22.2 No. 60950-1-07, UL62368-1, CAN/CSA C22.2 No. 62368-114): cULus Listed (only for 24Vac version) Electromagnetic compatibility (North America): FCC part 15 (Class A), ICES-003 (Class A) Level of protection Type (UL50E): 4X (only for 24Vac version) EAC certification Restriction of Hazardous Substances (RoHS), Directive 2011/65/EU: EN50581 Waste Electrical and Electronic Equipment (WEEE), Directive 2012/19/EU 34 Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Interpolated resolution 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm Spectral response - long wave infrared (LWIR) from 7.5μm to 13.5μm Internal shutter (only for sensor compensation) Digital Detail Enhancement (DDE) √ √ √ √ √ √ Digital Zoom 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x Image updating frequency 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps Image updating high frequency 30fps 30fps 30fps 30fps 30fps 30fps Scene range (High Gain) Scene range (Low Gain) Horizontal field of view 35° 25° 17° 13° 9,3° 6,5° Vertical field of view 27° 19° 13° 10° 7,1° 5° F-number F/1.25 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 Thermal sensitivity (NETD), Thermal camera with radiometric functions < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 Thermal sensitivity (NETD), Thermal camera with advanced radiometric functions < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 285m / 71m / 440m / 112m 640m / 160m 36m (935ft / / 56m (1443ft / 80m (2099ft 233ft / 118ft) / 2368ft / / 524ft / 262ft) 183ft) 930m / 230m / 116m (3051ft / 754ft / 380ft) 1280m / 320m / 160m (4199ft / 1050ft / 525ft) 1700m / 430m / 215m (5577ft / 1410ft / 715ft) 880m / 220m / 108m (2887ft / 722ft / 354ft) 2800m / 710m / 360m (9186ft / 2329ft / 1181ft) 3850m / 950m / 295m (12631ft / 3116ft / 967ft) 5100m / 1320m / 660m (16732ft / 4330ft / 2165ft) 1340m / 340m / 170m (4396ft / 1115ft / 557ft) 1950m / 500m / 250m (6397ft/ 1640ft/ 820ft) Radiometric analysis does not affect camera performance. 35 Instruction manual - English - EN EN - English - Instruction manual Image Sensor Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Uncooled VOx microbolometer Interpolated resolution 720x480 720x480 720x480 720x480 720x480 720x480 Pixel dimensions 17μm 17μm 17μm 17μm 17μm 17μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm from 7.5μm to 13.5μm Spectral response - long wave infrared (LWIR) from 7.5μm to 13.5μm Internal shutter (only for sensor compensation) Digital Detail Enhancement (DDE) √ √ √ √ √ √ Digital Zoom 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x Image updating frequency 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps Image updating high frequency 30fps 30fps 30fps 30fps 30fps 30fps Scene range (High Gain) Scene range (Low Gain) Horizontal field of view 69° 45° 32° 25° 18° 12.4° Vertical field of view 56° 37° 26° 20° 14° 9.9° F-number F/1.4 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 Thermal sensitivity (NETD), Thermal camera with radiometric functions < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 < 50mK at f/1.0 Thermal sensitivity (NETD), Thermal camera with advanced radiometric functions < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 < 30mK at f/1.0 Person (detection / recognition / identification) 250m / 63m / 390m / 95m / 570m / 144m 820m / 210m 31m (820ft / 47m (1280ft / / 72m (1870 / / 104m 207ft / 102ft) 312ft / 154ft) 472 / 236ft) (2690ft / 689ft / 341ft) 1140m / 280m / 142m (3740ft / 919ft / 466ft) 1500m / 380m / 190m (4921ft / 1247ft / 623ft) 720m / 175m 1080m / 1550m / /88m (2362 / 275m / 140m 400m / 200m 574 / 289ft) (3543ft / (5085ft / 902ft / 459ft) 1312ft / 656ft) 3000m / 800m / 200m (9843ft / 2625ft / 656ft) 3900m / 1060m / 540m (12795ft / 3478ft / 1772) 2200m / 580m / 290m (7218ft / 1903ft / 951ft) Radiometric analysis does not affect camera performance. 36 17 Technical drawings The indicated measurements are expressed in millimetres. Instruction manual - English - EN Ø 138 N°4 M10 240 480 330 Fig. 24 37 EN - English - Instruction manual Ø 138 N°4 M10 330 480 220.5 Fig. 25 38 Ø 138 Instruction manual - English - EN N°4 M10 240 480 460 Fig. 26 39 Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com ITALIANO NXPTZ SERIES2 (NXPTZHD) NXPTZR SERIES2 (NXPTZR) NXPTZT SERIES2 (NXPTZT) Telecamera PTZ single o dual vision per applicazioni onshore/offshore marittime e industriali 1 3 16.3 NXPTZT SERIES2 (NXPTZT)..............................................................................................................................................31 16.3.1 Meccanica...............................................................................................................................................................................................31 16.3.2 Finestre per custodia...........................................................................................................................................................................31 4 MNVCNXPTZ2_2032_IT 16.4 Telecamere termiche.........................................................................................................................................................35 MNVCNXPTZ2_2032_IT 5 6 MNVCNXPTZ2_2032_IT MNVCNXPTZ2_2032_IT 7 8 MNVCNXPTZ2_2032_IT MNVCNXPTZ2_2032_IT 9 10 MNVCNXPTZ2_2032_IT 5 Versioni 5.1 Telecamera Day/Night Fig. 2 Fig. 4 NXPTZT SERIES2 (NXPTZT). Fig. 3 MNVCNXPTZ2_2032_IT 11 5.3 Dual Vision con telecamera Day/Night e telecamera termica radiometrica 12 Tab. 1 Telecamera 1 230Vac 1 Telecamera Videotec super low-light Day/Night 30X zoom, FullHD 2 24Vac 2 Telecamera SONY FCB-EV7520, FULL HD 1080p, 30x 3 120Vac VW0Z0 0 C Conforme ONVIF, Profilo Q, Profilo S e Profilo T V J Conforme ONVIF, Profilo S e Profilo T MNVCNXPTZ2_2032_IT Tab. 2 Telecamera Termica 1 230Vac Y Telecamera termica 50mm, 336x256 0 2 24Vac A Telecamera termica 35mm, 336x256 R 3 120Vac B Telecamera termica 25mm, 336x256 V Telecamera termica 19mm, 336x256 F Telecamera termica 13mm, 336x256 C Telecamera termica 9mm, 336x256 W Telecamera termica 50mm, 640x512 D Telecamera termica 35mm, 640x512 E Telecamera termica 25mm, 640x512 U Telecamera termica 19mm, 640x512 G Telecamera termica 13mm, 640x512 H Telecamera termica 9mm, 640x512 0Z00 Frequenza C Conforme ONVIF, Profilo Q, Profilo S e Profilo T - 7.5Hz J Conforme ONVIF, Profilo S e Profilo T H 30Hz MNVCNXPTZ2_2032_IT NXPTZT SERIES2 - OPZIONI DI CONFIGURAZIONE NXPTZT Tab. 3 Telecamera Day/Night Telecamera termica Frequenza 1 230Vac 2 Y Telecamera termica 50mm, 336x256 W C Conforme ONVIF, Profilo Q, Profilo S e Profilo T - 7.5Hz 2 24Vac A Telecamera termica 35mm, 336x256 R J Conforme ONVIF, Profilo S e Profilo T H 30Hz 3 120Vac B Telecamera termica 25mm, 336x256 V Telecamera termica 19mm, 336x256 F Telecamera termica 13mm, 336x256 C Telecamera termica 9mm, 336x256 W Telecamera termica 50mm, 640x512 D Telecamera termica 35mm, 640x512 E Telecamera termica 25mm, 640x512 U Telecamera termica 19mm, 640x512 G Telecamera termica 13mm, 640x512 H Telecamera termica 9mm, 640x512 Telecamera SONY FCB-EV7520, FULL HD 1080p, 30x Fig. 5 14 MNVCNXPTZ2_2032_IT 01 20 0 Ø 35° 35° 35° 35° 8 Ø 11 Ø 238 Fig. 7 MNVCNXPTZ2_2032_IT 15 Fig. 8 Fig. 10 Ø11 90 150 Fig. 9 16 MNVCNXPTZ2_2032_IT Fig. 12 Fig. 11 MNVCNXPTZ2_2032_IT 17 Fig. 13 18 MNVCNXPTZ2_2032_IT 1 2 3 Verde-Bianco 4 Blu 5 Blu-Bianco 6 Verde 7 8 Marrone Tab. 5 Nero 1 (N) Neutro Nero 1 Giallo/Verde Personal Computer Switch (N) Neutro Nero 1 Tab. 4 Fig. 14 MNVCNXPTZ2_2032_IT 19 COLLEGAMENTO DEGLI ALLARMI E DEI RELÈ Rosso-Blu Marrone-Verde Bianco-Verde Verde Marrone Nero Tab. 6 AL1 COM Fig. 15 20 MNVCNXPTZ2_2032_IT 9.2 Interfaccia web Browser supportati (ultima versione): Microsoft Edge, Google Chrome, Mozilla Firefox. MNVCNXPTZ2_2032_IT 21 NXPTZTW. Fig. 16 Fig. 18 22 NXPTZWB. MNVCNXPTZ2_2032_IT Fig. 21 Fig. 19 NXPTZSFP. NXPTZCW. Fig. 20 NXPTZCOL. MNVCNXPTZ2_2032_IT 23 24 MNVCNXPTZ2_2032_IT F1 Fig. 23 Fig. 22 Fusibile (F2) 24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20 120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 230Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 Tab. 7 MNVCNXPTZ2_2032_IT 25 CAUSA PROBLEMA CAUSA PROBLEMA CAUSA 26 MNVCNXPTZ2_2032_IT 16.1.2 Finestre per custodia • Spessore: 5mm • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz • Motion Detection MNVCNXPTZ2_2032_IT 27 16.1.5 Cybersecurity 16.1.8 Telecamere Day/Night Full HD 30x DELUX SONY FCB-EV7520 Day/Night Full HD 30x Illuminazione Minima: • Colore: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) Lunghezza focale: da 4.3mm (wide) fino a 129mm (tele) Zoom: 30x (360x con zoom digitale) Iris: da F1.6 fino a F9.6 (Auto, Manuale) De-fog: On/Off 28 MNVCNXPTZ2_2032_IT 16.2.2 Finestre per custodia Restriction of Hazardous Substances (RoHS), Direttiva 2011/65/EU: EN50581 Waste Electrical and Electronic Equipment (WEEE), Direttiva 2012/19/EU MNVCNXPTZ2_2032_IT 29 16.2.6 Video Encoder video • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz Potenza assorbita: • 120W max • 30W, brandeggio fermo, riscaldamento spento 16.2.4 Rete Porta RJ45 • Connessione Ethernet: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Connessione Ethernet:100BASE-FX • Standard: conforme MSA 30 MNVCNXPTZ2_2032_IT Restriction of Hazardous Substances (RoHS), Direttiva 2011/65/EU: EN50581 Waste Electrical and Electronic Equipment (WEEE), Direttiva 2012/19/EU MNVCNXPTZ2_2032_IT 31 16.2.9 Ambiente 16.3.6 Video Telecamera Day/Night 16.3.5 Cybersecurity 32 MNVCNXPTZ2_2032_IT Telecamera Termica Zoom: 30x (360x con zoom digitale) Encoder video • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast Bilanciamento del bianco: Auto, Auto Tracing, Indoor, Outdoor, Manuale, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Guadagno: da 0dB fino a 50.0dB (Auto, Manuale) Wide Dynamic Range: 120dB Ingresso per reset remoto: 1 Auto Slowshutter: On/Off 16.3.8 Telecamere SONY FCB-EV7520 Day/Night Full HD 30x Risoluzione: Full HD 1080p (1920x1080) High Light Compensation (HLC): Off, Low, Mid, High, Livello Mascheratura (Off, On, da livello 1 fino a livello 15) • Colore: 0.0013lx (50 IRE, High sensitivity on) Telecamere termiche • B/W: 0.0008lx (30 IRE, High sensitivity on) MNVCNXPTZ2_2032_IT 33 34 MNVCNXPTZ2_2032_IT 16.4 Telecamere termiche TELECAMERE TERMICHE (RISOLUZIONE 336X256) Obiettivo 13mm 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm Digital Detail Enhancement (DDE) √ √ √ √ √ √ Zoom digitale 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps Gamma scena (High Gain) Gamma scena (Low Gain) 35° 25° 17° 13° 9,3° 6,5° 27° 19° 13° 10° 7,1° 5° F-number F/1.25 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 285m / 71m / 36m 440m / 112m 640m / 160m 930m / 230m 1280m / 1700m / / 56m / 80m / 116m 320m / 160m 430m / 215m 880m / 220m 1340m / 1950m / 2800m / 3850m / 5100m / / 108m 340m / 170m 500m / 250m 710m / 360m 950m / 295m 1320m / 660m MNVCNXPTZ2_2032_IT 35 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm da 7.5μm a 13.5μm Digital Detail Enhancement (DDE) √ √ √ √ √ √ Zoom digitale 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps Gamma scena (High Gain) Gamma scena (Low Gain) 69° 45° 32° 25° 18° 12.4° 56° 37° 26° 20° 14° 9.9° F-number F/1.4 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 50mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 < 30mK a f/1.0 250m / 63m / 31m 390m / 95m / 47m 570m / 144m 820m / 210m 1140m / 1500m / / 72m / 104m 280m / 142m 380m / 190m 720m / 175m 1080m / 1550m / 2200m / 3000m / 3900m / /88m 275m / 140m 400m / 200m 580m / 290m 800m / 200m 1060m / 540m 36 MNVCNXPTZ2_2032_IT Ø 138 N°4 M10 240 480 330 Fig. 24 MNVCNXPTZ2_2032_IT 37 Ø 138 N°4 M10 330 480 220.5 Fig. 25 38 MNVCNXPTZ2_2032_IT N°4 M10 240 480 460 Fig. 26 MNVCNXPTZ2_2032_IT 39 Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com MNVCNXPTZ2_2032_IT NXPTZ SERIES2 (NXPTZHD) NXPTZR SERIES2 (NXPTZR) NXPTZT SERIES2 (NXPTZT) Caméra PTZ single ou dual vision, pour applications onshore/offshore maritimes et industrielles 1 8 Allumage..................................................................................................................................21 8.1 Premier allumage..................................................................................................................................................................21 3 1 À propos de ce mode d’emploi................................................................................................. 7 5 6 1 À propos de ce mode d’emploi 7 8 9 10 Fig. 2 Fig. 4 Fig. 3 11 12 Tab. 1 Tension 1 230Vac 1 0 C 2 24Vac 2 V J 3 120Vac Tab. 2 Tension 1 230Vac Y 0 2 24Vac A R 3 120Vac B V F C W D E U G H 0Z00 C Conforme à ONVIF, Profil Q, Profil S et Profil T - 7.5Hz J H 30Hz Tab. 3 Tension Caméra Day/Night 1 230Vac 2 2 3 W 24Vac A R 120Vac B V F C W D E U G H 0Z00 C Conforme à ONVIF, Profil Q, Profil S et Profil T - 7.5Hz J H 30Hz NXPTZT SERIES2 (NXPTZT). Fig. 5 14 02 01 Ø 20 0 35° 35° 8 Ø 11 35° Fig. 6 35° Ø 238 Fig. 7 15 Fig. 8 Fig. 10 Ø11 90 150 Fig. 9 16 Fig. 12 Fig. 11 17 Fig. 13 18 1 Orange-Blanc 2 Orange 3 4 Bleue 5 6 Vert 7 Marron-Blanc 8 Marron CONNEXION DE LA LIGNE D'ALIMENTATION Tab. 5 Noir 1 (L) Phase Alimentation 230Vac Noir 2 Noir 1 (L) Phase Personal Computer Switch Alimentation 120Vac Noir 2 Noir 1 (L) Phase Tab. 4 Fig. 14 19 Relais 1, A Gris-Rose Relais 1, B Relais 2, A Relais 2, B Vert Marron Alarme 1 (contact sec), AL1 Noir Tab. 6 AL1 COM Contact sec Fig. 15 20 8 Allumage 21 Fig. 17 NXPTZTW. Fig. 16 Fig. 18 22 NXPTZWB. Fig. 21 Fig. 19 NXPTZSFP. NXPTZCW. Fig. 20 NXPTZCOL. 23 24 F2 F1 Fig. 23 Fig. 22 Fusible (F1) 24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20 120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 230Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 Tab. 7 25 13 Nettoyage PROBLÈME CAUSE PROBLÈME CAUSE PROBLÈME CAUSE 26 16.1.5 Cybersecurity Construction en acier inox AISI 316L 16.1.6 Vidéo Encodeur vidéo • Protocole de communication: ONVIF, Profil Q Profil S et Profil T • Configuration du dispositif: TCP/IPv4-IPv6, UDP/IPv4-IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast • 230Vac ±10%, 0.5A max, 50/60Hz • 120Vac ±10%, 1A max, 50/60Hz • 24Vac ±10%, 5A max, 50/60Hz • Motion Detection 27 Day/Night Full HD 30x DELUX SONY FCB-EV7520 Day/Night Full HD 30x Effets Image: E-flip De-fog: On/Off 28 16.1.11 Certifications - Applications marines Certification Lloyd's Register Marine Type Approval (les versions 24Vac et 120Vac ont besoin de filtre accessoire FM1010): • Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) 29 16.2.6 Vidéo 16.2.4 Réseau Port RJ45 • Connexion Ethernet: 10BASE-T/100BASE-T Slot SFP (SMALL FORM FACTOR PLUGGABLE) • Connexion Ethernet:100BASE-FX • Standard: conforme MSA 16.2.5 Cybersecurity 16.2.7 Interface I/O I/O carte d’alarme: 30 16.3 NXPTZT SERIES2 (NXPTZT) Construction en acier inox AISI 316L 16.2.10 Certifications Poids net: 24kg Fenêtre en germanium (optique 9mm, 13mm, 19mm, 25mm, 35mm) 31 16.3.6 Vidéo 16.3.5 Cybersecurity 32 • Configuration du dispositif: TCP/IPv4-IPv6, UDP/ IPv4-IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast Equilibrage du blanc: Auto, Auto Tracing, Indoor, Outdoor, Manuel, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Wide Dynamic Range: 120dB Effets Image: E-flip 16.3.8 Caméras SONY FCB-EV7520 Day/Night Full HD 30x Éclairage minimum: • Couleur: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) 33 • Protocole de communication: ONVIF, Profil Q Profil S et Profil T, ONVIF Thermal Service 16.3.10 Certifications 34 16.4 Caméras thermiques CAMÉRAS THERMIQUES (RÉSOLUTION 336X256) Objectif 13mm Objectif 19mm Objectif 25mm Objectif 35mm Objectif 50mm 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm Digital Detail Enhancement (DDE) √ √ √ √ √ √ 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps Gamme scène (High Gain) Champ de vision horizontal 35° 25° 17° 13° 9,3° 6,5° Champ de vision vertical 27° 19° 13° 10° 7,1° 5° F-number F/1.25 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 285m / 71m / 36m 440m / 112m 640m / 160m 930m / 230m 1280m / 1700m / / 56m / 80m / 116m 320m / 160m 430m / 215m 880m / 220m 1340m / 1950m / 2800m / 3850m / 5100m / / 108m 340m / 170m 500m / 250m 710m / 360m 950m / 295m 1320m / 660m 35 Objectif 9mm CAMÉRAS THERMIQUES (RÉSOLUTION 640X512) Objectif 9mm Objectif 13mm Objectif 19mm Objectif 25mm Objectif 35mm Objectif 50mm 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm Video stop < 1s Digital Detail Enhancement (DDE) √ √ √ √ √ √ 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps Gamme scène (High Gain) Champ de vision horizontal 69° 45° 32° 25° 18° 12.4° 56° 37° 26° 20° 14° 9.9° F-number F/1.4 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 50mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 < 30mK avec f/1.0 250m / 63m / 31m 390m / 95m / 47m 570m / 144m 820m / 210m 1140m / 1500m / / 72m / 104m 280m / 142m 380m / 190m 720m / 175m 1080m / 1550m / 2200m / 3000m / 3900m / /88m 275m / 140m 400m / 200m 580m / 290m 800m / 200m 1060m / 540m 36 Ø 138 N°4 M10 240 480 330 Fig. 24 37 Ø 138 N°4 M10 330 480 220.5 Fig. 25 38 N°4 M10 240 480 460 Fig. 26 NXPTZT SERIES2 (NXPTZT). 39 Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com 1 3 16.4 Wärmebildkameras............................................................................................................................................................35 5 6 7 8 9 4 Identifizierung 10 Abb. 2 Abb. 4 NXPTZT SERIES2 (NXPTZT). Abb. 3 11 12 Tab. 1 Kamera Optionen 1 230Vac 1 Super low-light Videotec-Kame- VW0Z0 ra Day/Night, 30-fach-Zoom, Full HD 0 2 24Vac 2 Kamera SONY FCB-EV7520, FULL HD 1080p, 30x V J 3 120Vac Tab. 2 Wärmebildkamera Optionen Frequenz 1 230Vac Y Wärmebildkamera 50mm, 336x256 0 Wärmebildkamera mit radiometri- 0Z00 schen Funktionen C - 7.5Hz 2 24Vac A Wärmebildkamera 35mm, 336x256 R J H 30Hz 3 120Vac B Wärmebildkamera 25mm, 336x256 V Wärmebildkamera 19 mm, 336x256 F Wärmebildkamera 13 mm, 336x256 C Wärmebildkamera 9mm, 336x256 W Wärmebildkamera 50mm, 640x512 D Wärmebildkamera 35mm, 640x512 E Wärmebildkamera 25mm, 640x512 U Wärmebildkamera 19 mm, 640x512 G Wärmebildkamera 13 mm, 640x512 H Wärmebildkamera 9mm, 640x512 NXPTZT Tab. 3 Day/Night-Kamera 1 230Vac 2 2 3 Wärmebildkamera Optionen Kamera SONY FCB-EV7520, FULL Y HD 1080p, 30x Wärmebildkamera 50mm, 336x256 W 24Vac A Wärmebildkamera 35mm, 336x256 R 120Vac B Wärmebildkamera 25mm, 336x256 V Wärmebildkamera 19 mm, 336x256 F Wärmebildkamera 13 mm, 336x256 C Wärmebildkamera 9mm, 336x256 W Wärmebildkamera 50mm, 640x512 D Wärmebildkamera 35mm, 640x512 E Wärmebildkamera 25mm, 640x512 U Wärmebildkamera 19 mm, 640x512 G Wärmebildkamera 13 mm, 640x512 H Wärmebildkamera 9mm, 640x512 0Z00 Frequenz C - 7.5Hz J H 30Hz Abb. 5 14 01 20 0 Ø 35° 35° 35° 35° 8 Ø 11 Ø 238 Abb. 7 15 Abb. 8 Abb. 10 Ø11 90 150 Abb. 9 16 Abb. 12 Abb. 11 17 Abb. 13 18 Kabelfarbe 1 2 Orange 3 4 Blau 5 6 Grün 7 8 Braun Tab. 5 (L) Phase Erder Personal Computer Switch (L) Phase Erder (L) Phase Erder Abb. 14 Tab. 4 19 ANSCHLUSS AN ALARME UND RELAIS Kabelfarbe Rot-Blau Relais 1, A Grau-Rosa Relais 1, B Relais 2, A Relais 2, B Grün Braun Reseteingang Tab. 6 AL1 COM Abb. 15 20 21 Abb. 17 NXPTZTW. Abb. 16 Abb. 18 NXPTZWB. 22 10.4 Winkeladaptermodul Eckmontage-Adapter. Abb. 21 NXPTZSFP. Abb. 19 NXPTZCW. 10.5 Massive Mastschelle Mastmontage-Adapter. Abb. 20 NXPTZCOL. 23 24 F1 Abb. 23 Abb. 22 24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20 120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 230Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 Tab. 7 25 URSACHE PROBLEM URSACHE PROBLEM URSACHE 26 16.1.5 Cybersecurity 16.1.6 Video Video-Encoder • Kommunikationsprotokoll: ONVIF, Profil Q, Profil S und Profil T • Gerätekonfiguration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WS-DISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast Fenster Extraklarglas • 3 unabhängige Video-Streams Full HD • Stärke: 5mm • 230Vac ±10%, 0.5A max, 50/60Hz • Webserver • 120Vac ±10%, 1A max, 50/60Hz 27 16.1.1 Mechanik 16.1.8 Kamera Day/Night Full HD 30x DELUX SONY FCB-EV7520 Day/Night Full HD 30x Image Sensor: 1/2.8" Exmor™ R CMOS sensor Image Sensor: 1/2.8" Exmor™ R CMOS sensor Effektive Pixel: ca. 2.38 Megapixels Effektive Pixel: ca. 2.13 Megapixels Zoom: 30x (360x mit digitalem Zoom) Horizontale Blickwinkel: von 61.6° (wide end) bis zu 2.50° (tele end) 28 29 16.2.3 Elektrik 16.2.6 Video Video-Encoder • Standard: MSA-konform • Webserver • Motion Detection 16.2.5 Cybersecurity • Protokolle SNMP und NTCIP I/O Alarm-Karte: 30 16.3 NXPTZT SERIES2 (NXPTZT) 16.3.1 Mechanik 16.2.9 Umgebung Fenster Extraklarglas 31 16.2.8 Kamera 16.3.3 Elektrik 16.3.6 Video Day/Night-Kamera • Motion Detection 16.3.5 Cybersecurity 32 Wärmebildkamera Zoom: 30x (360x mit digitalem Zoom) Video-Encoder • Gerätekonfiguration: TCP/IPv4-IPv6, UDP/IPv4IPv6, HTTP, HTTPS, NTP, DHCP, WSDISCOVERY, DSCP, IGMP (Multicast), SOAP, DNS Vertikale Bildwinkel: von 38.5° (wide end) bis zu 1.3° (tele end) • Streaming: RTSP, RTCP, RTP/IPv4-IPv6, HTTP, Multicast Weißabgleich: Auto, Auto Tracing, Indoor, Outdoor, Manuell, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Wide Dynamic Range: 120dB Bildeffekte: E-flip • Webserver Belichtungskontrolle: Auto, Manuell, Priorität (Shutter Priority, Iris Priority, Priorität Helligkeit) • Motion Detection De-fog: Off, Low, Mid, High Indoor Flicker Reduction I/O Alarm-Karte: High sensitivity: On/Off Backlight-Kompensation: On/Off Auto Slowshutter: On/Off 16.3.8 Kamera SONY FCB-EV7520 Day/Night Full HD 30x • Farbe: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) Brennweitenlänge: von 4.3mm (wide) bis zu 129mm (Tele) 33 • Kommunikationsprotokoll: ONVIF, Profil Q, Profil S und Profil T, ONVIF Thermal Service 34 16.4 Wärmebildkameras WÄRMEBILDKAMERAS (AUFLÖSUNG 336X256) Objectiv 13mm Objectiv 19mm Objectiv 25mm Objectiv 35mm Objectiv 50mm Image Sensor Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm von 7.5μm bis 13.5μm Video stop < 1s Digital Detail Enhancement (DDE) √ √ √ √ √ √ Digital-Zoom 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps 35° 25° 17° 13° 9,3° 6,5° 27° 19° 13° 10° 7,1° 5° F-number F/1.25 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 30mK bei f/1.0 < 30mK bei f/1.0 < 30mK bei f/1.0 285m / 71m / 36m 440m / 112m 640m / 160m 930m / 230m 1280m / 1700m / / 56m / 80m / 116m 320m / 160m 430m / 215m 880m / 220m 1340m / 1950m / 2800m / 3850m / 5100m / / 108m 340m / 170m 500m / 250m 710m / 360m 950m / 295m 1320m / 660m 35 Objectiv 9mm WÄRMEBILDKAMERAS (AUFLÖSUNG 640X512) Objectiv 9mm Objectiv 13mm Objectiv 19mm Objectiv 25mm Objectiv 35mm Objectiv 50mm Image Sensor Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) Ungekühltes Vanadiumoxid-Mikrobolometer (VOx) 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm Video stop < 1s Video stop < 1s Digital Detail Enhancement (DDE) √ √ √ √ √ √ Digital-Zoom 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps 69° 45° 32° 25° 18° 12.4° 56° 37° 26° 20° 14° 9.9° F-number F/1.4 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 50mK bei f/1.0 < 30mK bei f/1.0 < 30mK bei f/1.0 < 30mK bei f/1.0 < 30mK bei f/1.0 250m / 63m / 31m 390m / 95m / 47m 570m / 144m 820m / 210m 1140m / 1500m / / 72m / 104m 280m / 142m 380m / 190m 720m / 175m 1080m / 1550m / 2200m / 3000m / 3900m / /88m 275m / 140m 400m / 200m 580m / 290m 800m / 200m 1060m / 540m 36 Ø 138 N°4 M10 240 480 330 Abb. 24 NXPTZ SERIES2 (NXPTZHD). 37 Ø 138 N°4 M10 330 480 220.5 Abb. 25 NXPTZR SERIES2 (NXPTZR). 38 N°4 M10 240 480 460 Abb. 26 NXPTZT SERIES2 (NXPTZT). 39 Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com РУССКИЙ 1 3 MNVCNXPTZ2_2032_RU 5 6 7 8 9 4 Обозначение 4.2 Маркировка изделия 10 5 Модели 5.1 Камера Day/Night Рис. 2 Рис. 3 Рис. 4 NXPTZT SERIES2 (NXPTZT). 11 12 5.4 Идентификация модели NXPTZ SERIES2 - ОПЦИИ КОНФИГУРАЦИЙ NXPTZHD Табл. 1 Камера 1 230Vac 1 2 24Vac 2 Камера SONY FCB-EV7520, FULL HD 1080p, 30x 3 120Vac VW0Z0 Опции Редакция 0 C V J Табл. 2 Тепловизор Опции Редакция 1 230Vac Y Тепловизор 50mm, 336x256 0 C 7.5Hz 2 24Vac A Тепловизор 35mm, 336x256 R J 30Hz 3 120Vac B Тепловизор 25mm, 336x256 V F C W Тепловизор 50mm, 640x512 D Тепловизор 35mm, 640x512 E Тепловизор 25mm, 640x512 U G H Частота NXPTZT SERIES2 - ОПЦИИ КОНФИГУРАЦИЙ Напряжение Камера Day/Night NXPTZT Табл. 3 1 230Vac 2 3 2 Тепловизор Опции Редакция Камера SONY FCB-EV7520, FULL Y HD 1080p, 30x Тепловизор 50mm, 336x256 W 24Vac A Тепловизор 35mm, 336x256 R 120Vac B Тепловизор 25mm, 336x256 V F C W Тепловизор 50mm, 640x512 D Тепловизор 35mm, 640x512 E Тепловизор 25mm, 640x512 U G H 0Z00 Частота C J H NXPTZT SERIES2 (NXPTZT). 7.5Hz 30Hz Рис. 5 14 6.5.1 Крепление к парапету или на потолок 01 Рис. 6 Ø 20 0 35° 35° 35° 35° 8 Ø 11 Ø 238 Рис. 7 15 Рис. 8 90 Рис. 10 Ø11 150 Рис. 9 16 Рис. 12 Рис. 11 17 Рис. 13 18 Описание (L) Фаза 1 2 3 4 Синий 5 6 7 8 Табл. 5 (L) Фаза Personal Computer Switch (L) Фаза Защитное заземление Табл. 4 Рис. 14 19 ПОДКЛЮЧЕНИЕ АВАРИЙНЫХ СИГНАЛОВ И РЕЛЕ Описание Реле 1, A Реле 1, B Реле 2, A Реле 2, B Табл. 6 AL1 COM Рис. 15 20 21 9 Конфигурация 10.2 Парапет или кронштейн для монтажа на потолке Рис. 17 NXPTZTW. Рис. 16 Рис. 18 22 NXPTZWB. Рис. 21 Рис. 19 NXPTZSFP. NXPTZCW. Рис. 20 NXPTZCOL. 23 24 12.2.1 Замена предохранителей F1 Рис. 23 Рис. 22 24Vac, 50/60Hz T 4A H 250V 5x20 T 4A H 250V 5x20 120Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 230Vac, 50/60Hz T 2A H 250V 5x20 T 4A H 250V 5x20 Табл. 7 25 ПРИЧИНА РЕШЕНИЕ НЕИСПРАВНОСТЬ ПРИЧИНА РЕШЕНИЕ НЕИСПРАВНОСТЬ ПРИЧИНА РЕШЕНИЕ 26 16.1.6 Видео 16.1.2 Окно кожуха • Видеосжатие: H.264/AVC, MJPEG, JPEG, MPEG4 • Толщина: 5mm • 230Vac ±10%, 0.5A max, 50/60Hz • Веб-сервер • 120Vac ±10%, 1A max, 50/60Hz • Motion Detection • 120W max 27 16.1.5 Cybersecurity Day/Night Full HD 30x DELUX SONY FCB-EV7520 Day/Night Full HD 30x Разрешение: Full HD 1080p (1920x1080) Разрешение: Full HD 1080p (1920x1080) Датчик изображения: 1/2.8" Exmor™ R CMOS sensor Датчик изображения: 1/2.8" Exmor™ R CMOS sensor Минимальное освещение: • Цвет: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) • Цвет: 0.006lx (F1.6, 30 IRE) • B/W: 0.0006lx (F1.6, 30 IRE) Фокусное расстояние: от 4.5mm (wide) до 135mm (теле) Диафрагма: от F1.6 до F9.6 (Auto, Ручной) Диафрагма: от F1.6 до F14 (Auto, Ручной) Баланс белого (White Balance): Auto, Ручной Баланс белого (White Balance): Auto, Auto Tracing, Indoor, Outdoor, Ручной, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Усиление: от 0dB до 50.0dB (Auto, Ручной) 28 Электробезопасность (CE): EN60950-1, IEC60950-1, EN623681, IEC62368-1 Степень защиты IP (EN/IEC60529): IP66, IP67, IP68, IP69 16.2.2 Окно кожуха Сертификат EAC Restriction of Hazardous Substances (RoHS), Директива 2011/65/EU: EN50581 Waste Electrical and Electronic Equipment (WEEE), Директива 2012/19/EU 29 16.2.6 Видео Видеокодер • Ethernet подключение:100BASE-FX • Веб-сервер • Напряжение сети питания: 3.3V 30 16.3 NXPTZT SERIES2 (NXPTZT) Степень защиты IP (EN/IEC60529): IP66, IP67, IP68, IP69 16.3.2 Окно кожуха • Толщина: 2mm Защита от солевого тумана: EN60068-2-52 31 16.3.6 Видео Камера Day/Night • 230Vac ±10%, 0.5A max, 50/60Hz Видеокодер • 120Vac ±10%, 1A max, 50/60Hz • Протокол связи: ONVIF, Profile Q, Profile S и Profile T • 24Vac ±10%, 5A max, 50/60Hz • Ethernet подключение:100BASE-FX • Веб-сервер • Напряжение сети питания: 3.3V • Motion Detection 32 Тепловизор Видеокодер Баланс белого (White Balance): Auto, Auto Tracing, Indoor, Outdoor, Ручной, Outdoor Auto, Sodium Lamp (Fix/Auto/Outdoor Auto) Усиление: от 0dB до 50.0dB (Auto, Ручной) Система фокусировки: Auto (PTZ Trigger, Full Auto), Ручной • Веб-сервер SONY FCB-EV7520 Day/Night Full HD 30x Разрешение: Full HD 1080p (1920x1080) • Цвет: 0.0013lx (50 IRE, High sensitivity on) • B/W: 0.0008lx (30 IRE, High sensitivity on) 33 • Протокол связи: ONVIF, Profile Q, Profile S и Profile T, ONVIF Thermal Service • Test Specification Number 1 (ENV1, ENV2, ENV3, ENV5) Защита от солевого тумана: EN60068-2-52 34 Объектив 19mm Объектив 25mm Объектив 35mm Объектив 50mm 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s √ √ √ √ √ 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 2x, 4x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps 35° 25° 17° 13° 9,3° 6,5° 27° 19° 13° 10° 7,1° 5° F/1.25 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 285m / 71m / 36m 440m / 112m / 56m 640m / 160m / 80m 930m / 230m / 116m 1280m / 320m / 160m 1700m / 430m / 215m 880m / 220m / 108m 1340m / 340m / 170m 1950m / 500m / 250m 2800m / 710m / 360m 3850m / 950m / 295m 5100m / 1320m / 660m 35 Объектив 9mm ТЕПЛОВИЗОРЫ (РАЗРЕШЕНИЕ 640X512) Объектив 9mm Объектив 13mm Объектив 19mm Объектив 25mm Объектив 35mm Объектив 50mm 720x480 720x480 720x480 720x480 720x480 720x480 17μm 17μm 17μm 17μm 17μm 17μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm от 7.5μm до 13.5μm Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s Video stop < 1s √ √ √ √ √ 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 2x, 4x, 8x 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 7.5fps 30fps 30fps 30fps 30fps 30fps 30fps 69° 45° 32° 25° 18° 12,4° 56° 37° 26° 20° 14° 9,9° F/1,4 F/1.25 F/1.25 F/1.1 F/1.2 F/1.2 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 50mk при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 < 30mK при f/1.0 250m / 63m / 31m 390m / 95m / 47m 570m / 144m / 72m 820m / 210m / 104m 1140m / 280m / 142m 1500m / 380m / 190m 720m / 175m /88m 1080m / 275m / 140m 1550m / 400m / 200m 2200m / 580m / 290m 3000m / 800m / 200m 3900m / 1060m / 540m 36 Ø 138 N°4 M10 240 480 330 Рис. 24 37 Ø 138 N°4 M10 330 480 220.5 Рис. 25 38 N°4 M10 240 480 460 Рис. 26 NXPTZT SERIES2 (NXPTZT). 39 Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com Headquarters Italy Videotec S.p.A. Via Friuli, 6 - I-36015 Schio (VI) - Italy Tel. +39 0445 697411 - Fax +39 0445 697414 Email: [email protected] www.videotec.com MNVCNXPTZ2_2032 MNVCNXPTZ2_2032">

Public link updated
The public link to your chat has been updated.
Advertisement