Groupe Brandt DRH 914 JE, DRH914JE, DRH915JE, DRP772MJ Owner's manual


Add to My manuals
72 Pages

advertisement

Groupe Brandt DRH 914 JE, DRH914JE, DRH915JE, DRP772MJ Owner's manual | Manualzz
Réfrigérateur à intégrer
Integrated Refrigerator
Ijkast
Kühlschrank
DRH 914 JE
2
3
4
5
6
7
8
9
10
11
12
13
14
SN
N
ST
T
15
16
T
TAW3MERA
T
TAW1MERA
T
TAW2MERA
17
1BL80R
FAL1MERA
FAL2MERA
18
PL09
5. Vissez l’appareil.
PL12
PL13
19
TE1MERA
20
Instructions for the use of the instructions booklet
Notes which are important for your safety or for the proper functioning of the
appliance
Supplementary information regarding operation and practical applications of the
appliance.
Tips and notes concerning economical and environmentally sound use of the
appliance
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more
detailed information about recycling of this product, please contact your local
city office, your household waste disposal service or the shop where you purchased the product.
Contents
Safety Instructions.............................................................................................21
Disposal ..........................................................................................................22
Use and Control / Before Use.............................................................................23
Starting the appliance .......................................................................................23
Temperature control ..........................................................................................23
Internal parts / Storage shelves / Door shelves .....................................................24
Hints / Saving Energy ........................................................................................24
Hints for refrigeration .........................................................................................25
Hints for freezing...............................................................................................25
Hints for storage of frozen food ...........................................................................26
Explanation of the cold zonesigns........................................................................26
Maintenance / Defrosting ..................................................................................27
How to change the bulb .....................................................................................28
Something not Working......................................................................................29
Customer Service and Spare Parts / Technical Specifications .................................30
Installation / Positioning ...................................................................................30
Electrical connection .........................................................................................31
Change of door opening direction of frozen food compartment ................................31
Door reversal....................................................................................................32
Building-in........................................................................................................33
21
Safety Instructions
This information has been provided in the interests of your safety. Please read it before
installing or using the appliance. Please retain the instruction book for future reference. If owner ship is transferred, please leave the user manual for the new owner.
Domestic Use
Keep these instructions and they should
remain at the appliance when moving
away or changing owner.
This appliance is designed for storing
food, domestic use and being used
according to these instructions only.
Specialised companies that are qualified to do so by the manufacturer must
carry out service and repairs including
repairing and changing the power
cord. Accessory parts supplied by them
should be used only for repairing.
Otherwise the appliance can be damaged
or can cause other damage or injury.
Make sure that the mains plug is accessible after the installation of the appliance.
Before maintenance, switch off the appliance and disconnect the mains plug from
the mains socket.
Power cord must not be lengthened.
Make sure that the power plug is not
squashed or damaged by the back of
the fridge/freezer.
- A damaged power plug may overheat
and cause a fire.
Do not place heavy articles or the
fridge/freezer itself on the power cord.
- There is a risk of a short circuit and fire.
Do not remove the power cord by
pulling on its lead, particularly when
the fridge/freezer is being pulled out
of its niche.
- Damage to the cord may cause a shortcircuit, fire and/or electric shock.
- If the power cord is damaged, it must be
replaced by a certified service agent or
qualified service personnel.
If the power plug socket is loose, do
not insert the power plug.
- There is a risk of electric shock or fire.
Without the lamp cover of interior lighting
you must not operate the appliance.
When cleaning, defrosting, taking out
frozen food or ice tray do not use sharp,
pointed or hard devices, as they can
cause damage to the appliance.
Be careful not to allow liquids to the temperature control and lighting box.
Ice and ice-cream can cause hurt if they
are eaten immediately after removal from
the frozen food compartment.
After dissolving frozen food must not be
refrozen, it must be used up as soon as
possible.
Store pre-packed frozen food in accordance with the frozen food manufacturer's
instructions.
You must not make defrosting faster with
any electric heating appliance or chemicals.
Do not put hot pot to the plastic parts.
Do not store flammable gas and liquid in
the appliance, because they may explode.
Do not store carbonated drinks, bottled
drinks and bottled fruits in the frozen food
compartment.
Check and clean the outlet of melting
water coming during defrosting regularly a label inside the appliance warns you for
this. If it is clogged the melting water gathered can cause earlier failure.
Precautions for child safety
Do not allow children to play with the
packaging of the appliance. Plastic foil
can cause suffocation.
Adults must handle the appliance. Do not
allow children to play with it or its controlling parts.
If you are discarding the appliance pull the
plug out of the socket, cut the connection
cable (as close to the appliance as you
can) and remove the door to prevent playing children to suffer electric shock or to
close themselves into it.
22
This appliance is not intended for use by
persons (including children) with reduced
physical sensory or mental capabilities, or
lack of experience and knowledge, unless
they have been given supervision or
instruction concerning use of the appliance by a person responsible for their
safety.
Environment Protection
This appliance does not contain gasses
which could damage the ozone layer, in
either its refrigerant circuit or insulation
materials. Theappliance shall not be discarded together with the urban refuse and
rubbish. Avoid damaging the cooling unit.
Information on your local disposal sites
may be obtained from your municipal
authorities.
Remove the plug and ensure that any
locks or catches are removed, to prevent
young children being trapped inside.
Disposal
Appliance Packaging Information
The materials marked with the symbol
are recyclable.
>PE< for polyethylene, e.g. sheet wrapping
material
>PS< for polystyrene, e.g. padding material
(always CFC-free)
>POM< polyoxymethylene, e.g. plastic clips.
All materials are environmentally sound!
Safety precautions for isobutane
Warning
The refrigerant of the appliance is isobutane (R 600a) that is inflammable and
explosive to a greater extent.
Keep ventilation openings, in the appliance enclosure or in the built-in structure,
clear of obstruction.
Do not use mechanical devices or other
means to accelerate the defrosting
process, other than those recommended
by the manufacturer.
Do not damage the refrigerant circuit.
Do not use electrical appliances inside the
food storage compartments of the appliance, unless they are of the type recommended by the manufacturer.
23
Before Use
Wait 4 hours before connecting the appliance to allow the oil to flow back in the compressor.
Before using the appliance for the first
time, wash the interior and all internal
accessories with lukewarm water and
some neutral soap so as to remove the
typical smell of a brand-new product, then
dry thoroughly.
Do not use detergents or abrasive
powders, as these will damage the
finish.
Remove safety elements used for transportation.
Starting the appliance
Insert the plug into the wall socket and
turn the thermostat knob clockwise
beyond position «O» (OFF).
The thermostat control situated inside the
fridge compartment regulates the temperature of the appliance.
Turn the thermostat control to the
required setting.
Temperature Control
The following effects are of significance in
respect of the interior temperature:
Ambient temperature
Quantity and temperature of the food
stored;
Frequency with which the door is opened
and how long it is left open
the location of the appliance.
The temperature inside the appliance is
automatically adjusted.
Setting “1” = hightest temperature,
warmest setting
Setting “6” = lowest temperature, coldest setting.
Setting “ ” = Off
A medium setting is generally the most
suitable.
24
Internal Parts
Storage shelves
The shelves can be removed for cleaning.
To permit storage of food packages of
various sizes, the shelves can be placed
at different heights.
To remove the internal shelf pull forward
until it can be tipped up or down and
removed.
Please do the same in reverse to insert
the shelf at a different height.
The glass shelf above the vegetable
drawers and the bottle shelf should
always remain in position, to ensure
correct air circulation.
Door shelves
To permit storage of food packages of
various sizes, the central door shelf can
be adjusted in height.
Gradually pull the shelf in the direction of
the arrows until it comes free, then reposition as required.
For more thorough cleaning, the top and
bottom door sheves can be easily
removed and refitted in position.
Hints
Saving Energy
Pay careful attention to where the cabinet
is placed. See the section Installation.
When installed correctly the cabinet will
consume less energy.
Try to avoid keeping the doors open for
long periods or opening the doors too frequently as warm air will enter the cabinet
and cause the compressor to switch on
unnecessarily often.
If the ambient temperature is high, the thermostat knob is on the coldest setting (higher numbers) and the appliance is fully
loaded, the compressor may run continuously, causing frost or ice to form on the
evaporator. If this happens, turn the knob
to a warmer setting (lower numbers) to
allow automatic defrosting and so a saving
in electricity consumption.
Do not place warm foods inside the appliance. Allow warm foods to cool first.
Keep the heat emitting condenser, the metall grille on the rear wall of your appliance,
always clean.
25
Hints for refrigeration
Do not store warm food or evaporating liquids in the refrigerator and do cover or
wrap up the food, particularly if it has a
strong smell.
To help you use your refrigerator correctly,
here are some useful hints:
Raw meat (beef, pork, lamb & poultry):
wrap in polythene bags and place on top
of the salad compartment, this being the
coldest spot in the refrigerator.
Meat can only be stored safely in this way
for one or two days at the most.
Cooked food, cold cuts, jelly, etc.:
these should be well covered and can be
stored on any of the glass shelves.
Fruit & vegetables: these should be thoroughly cleaned and placed in the bottom
drawer/s.
Butter & cheese: these should be placed
in special airtight containers or wrapped in
aluminium foil or polythene bags to keep
out as much air as possible.
Milk bottles: these should have a top and
should be stored in the bottle rack on the
door.
Bananas, potatoes, onions and garlic, if
not packed, must not be kept in the refrigerator
Hints for freezing
To help you make the most of the freezing
process, here are some important hints:
the maximum quantity of food which can
be frozen in 24 hrs. is shown on the rating
plate;
the freezing process takes 24 hours. No
further food to be frozen should be added
during this period;
only freeze top quality, fresh and thoroughly cleaned, foodstuffs;
prepare food in small portions to enable it
to be rapidly and completely frozen and to
make it possible subsequently to thaw
only the quantity required;
wrap up the food in aluminium foil or polythene and make sure that the packages
are airtight;
do not allow fresh, unfrozen food to touch
food which is already frozen, thus avoiding
a rise in temperature of the latter;
lean foods store better and longer than
fatty ones; salt reduces the storage life of
food;
water ices, if consumed immediately after
removal from the freezer compartment,
can possibly cause the skin to be freeze
burnt;
it is advisable to show the freezing in date
on each individual pack to enable you to
keep tab of the storage time.
26
Hints for storage of frozen food
To obtain the best performance from this
appliance, you should:
make sure that the commercially frozen
foodstuffs were adequately stored by the
retailer;
be sure that frozen foodstuffs are transferred from the foodstore to the freezer in
the shortest possible time;
not open the door frequently or leave it
open longer than absolutely necessary.
Once defrosted, food deteriorates rapidly
and cannot be refrozen.
Do not exceed the storage period indicated by the food manufacturer.
Explanation of the cold zonesigns
The symbol shown here on the left
indicates the coldest point inside your
refrigerator.
Coldest area: below or equal to +4°C
Meat, poultry, fish, cold cuts, ready-to-eat
meals, mixed salads, egg or cream based
mixes and cakes, fresh pasta, cake mixes,
pizzas/quiches, fresh foods and fresh-milk
cheeses, vegetables ready to be used and
packed in plastic bags and all other fresh
foods whose expiry date is associated with a
preservation temperature below or equal to
+4°C.
Temperatur indicator
Thermostat must be
adjusted
Right Temperature
With the temperature indicator you can keep
a check that your refrigerator is working properly.
The indicator shows the "OK" symbol when
the coldest area reaches a temperature that
is below or equal to 4ˇC.
If the temperature is higher than 4ˇC the indicator is black so you must adjust the thermostat to make the temperature drop.
ATTENTION: Keeping the refrigerator door
open for a long time will cause the internal
temperature to rise. To measure the temperature correctly, it should be read on the indicator within 30 seconds.
27
Maintenance
Unplug the appliance before carrying out any maintenance operation.
Warning
This appliance contains hydrocarbons in its
cooling unit maintenance and recharging
must therefore only be carried out by authorised technicians.
Defrosting
Bleeding part of the moisture of cooling
chamber in form of frost and ice goes with
the operation of the refrigerator.
Thick frost and ice has an insulating effect,
so it reduces cooling efficiency as the temperature increases, it needs more energy, at
a certain thickness it does not allow the door
of the frozen food compartment to open,
possibly the door can be broken.
At this type of appliance defrosting fresh
food compartment is automatic without any
external intervention.
The thermostatic control interrupts the operation of compressor at regular intervals for
more or less time - during this cooling is
interrupted - temperature of the fresh food
compartment increases and defrosting
occurs. After defrosting the thermostatic
control restarts operation of the system.
Melting water flows through defrost water
outlet into the evaporative tray maintained on
the top of compressor and evaporates due to
warmth of it.
Check and clean the outlet of
melting water coming during
defrosting regularly. If it is
clogged the melting water gathered can cause earlier failure as it
can go to the insulating of the
appliance.
Clean the melting water outlet with the supplied pipe scraper that can be seen in the figure. The pipe scraper has to be stored in the
outlet.
Occasionally check defrost water outlet not to
be clogged up.
The most typical case of clogging up in the
defrost water outlet when you put food
wrapped in some paper into the appliance
and this paper contacts back plate of fresh
food compartment and freezes to it. If you
remove the food right at this moment the
paper will tear and it can cause clogging up
in the outlet by getting into it. So you are
asked to be careful - because of the above when placing foods wrapped in paper into the
appliance.
In case of increased demand e.g. during heatwaves, the refrigerator temporarily happens to operate constantly. During this the automatic defrosting
is ineffective.
Remaining small ice and frost stains on back
plate of the fresh food compartment after
defrosting period is not abnormal.
The frozen food compartment can not be
equipped with automatic defrosting set since
the deep-frozen and frozen foods do not
endure melting temperature.
Provided it is not too thick, the layer of frost
or ice can be scraped off and removed using
a plastic scraper.
When ice coating is so thick that it can not be
removed with the plastic scraper, the frozen
food compartment has to be defrosted (generally 2-3 times a year).
28
Take the foods out of the frozen and fresh
food compartment, wrap them into some layers of paper or cloth. Put them to a possible
cool place while defrosting.
Break the circuit of the appliance and leave
the doors of frozen and fresh food compartment open.
Continuously blot off the defrosting water by a
soft cloth or sponge.
After defrosting wipe the surfaces, apply voltage to the appliance and put the foods back
to their places.
It is recommended to operate the appliance
at the highest position of the thermostatic
control so that it can reach the proper storing
temperature as soon as possible.
Cleaning
Never use metal objects for cleaning your appliance as it may get
damaged.
NEVER use detergents, abrasive powders,
highly perfumed cleaning products or wax
polishes to clean the interior as these will
damage the surface and leave a strong
odour.
Clean the inside with warm water and bicarbonate of soda. Rinse and dry thoroughly.
To guarantee a safe operation of the fridge,
once a year remove the ventilation grill at the
base and clean the air channels with a vacuum cleaner.
How to change the bulb
Disconnect the appliance from the electricity
supply.
Empty all foods and clean the appliance,
leaving the doors ajar to prevent unpleasant
smells.
Should the light fail to work you can change it
as below:
Break the circuit of the appliance.
Unscrew the plate screw fixing the lamp
cover, then take the lamp cover off in the
direction of arrow and the bulb can be
changed. (Type of the bulb: Mignon 322,
230 V, 15 W, E 14 thread)
After changing bulb replace the lamp cover,
screw the plate screw and apply voltage to
the appliance.
The lack of light does not influence operation
of the refrigerator.
29
Something not Working
Problems may be due to causes which
can easily be solved before calling the
Technical Service. Please follow these
instructions:
SOLUTION
Level properly the appliances if it is not well levelled.
Weight surpasses the storage limit of the door shelf so spread weight
Door does not close
more evenly or take some products out.
The appliance is not properly installed. Please look in the “Building-in”
section.
Set a lower temperature.
Distribute the food products to allow cold air to circulate around them.
It is too warm inside the refrigMake sure that the door is completely closed and that the insulating strip
erator
is complete and clean.
The temperature where the cabinet is placed is above normal room temperature.
It is too cold inside the refriger- Turn the temperature regulator to a warmer setting temporarily.
ator.
SYMPTOM
The compressor works continuously.
There is water inside/outside
the refrigerator.
Water comes out on the floor.
Noises
Turn the thermostat knob to a lower number.
The temperature where the cabinet is placed is above normal room temperature.
Check that the ventilation is sufficient and that the ventilation openings
are unobstructed.
The cause could be the introduction of large quantities of food and/or
frequent opening/closing of the door.
Sometimes is normal. During automatic defrosting frost thaws on the
cooling plate.
Place the drain hose at the back of the cabinet above the drain bowl.
Sometimes this is normal. Temperature control may cause clicking
sounds when the system is connected or disconnected.
The injected cooling gas may produce a gurgling sound while passing
through the tubes.
The motor may cause a humming noise and/or slight bumping.
The insulation material used has a tendency to slighly increase noise levels, how ever it allows for much better insulation and a lower energy consumption.
30
Customer service and spare parts
If you cannot find the remedy for a malfunction in these operating instructions, please
contact your dealer or our customer service
department and consult the Guarantee card.
Selective ordering of replacement parts can
save unnecessary travel and costs.
For this reason always provide the following
appliance information:
Model Name
Model Number (PNC)
Serial Number (S-No.)
This information can be found on the rating
plate inside the cabenit on the left hand wall.
We recommend that you enter this information here, so that it is handy if needed.
Technical specifications
The technical data is indicated in the rating
plate on the left side inside the appliance.
Installation
Take utmost care when handling
your appliance so as not to cause
any damages to the cooling unit
with consequent possible fluid
leakages.
During normal operation, the condenser
and compressor at the back of the appliance heat up considerably. Always ensure
that there is adequate ventilation as a failure to do this will result in component failure and possible food loss. See installation instructions.
Important: if the supply cord is damaged,
it must be replaced by a special cord or
assembly available from the manufacturer
or its service agent.
Positioning
Unpack the cabinet and check that it is in
good condition and free of any transport
damage.
The appliance must not be located close
to radiators or gas cookers.
Avoid prolonged exposure of the appliance to direct sunlight.
For safety reasons, minimum ventilation
must be as shown in Fig.
Attention: keep ventilation openings clear
of obstruction.
It is necessary that the niche is provided
with a conduct of venti-lation having the
following dimensions:
Depth: 50 mm
Width: 540 mm
The climate classification can be found on the
rating plate, which is located inside the cabinet on the left hand wall.
The following table shows which ambient temperature is correct for each climate classification:
Climate
for an ambient
classification
temperature of
SN
+10 to +32 °C
N
+16 to +32 °C
ST
+16 to +38 °C
T
+16 to +43 °C
31
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate correspond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not
observed.
This appliance complies with the E.E.C.
Directives.
Change of door opening direction of frozen food compartment
After changing the outer door opening direction at this type it is necessary to remount the
door of the frozen food compartment as well.
Operations and their order can be seen in figure.
Press the retaining lever inside the lower
doorhinge.
Tilt the lower doorhinge out together with
the freezer compartment door then
remove it from the pin of the freezer compartment door.
Remove the rectangular plug and put it
into the opening got free on the other
side.
Having the freezer compartment door
turned by 180° put the lower hinge onto
the lower pin of the freezer compartment
door.
Put the upper hinge pin of the freezer
compartment door into the free opening,
then push the lower hinge into its place
together with the freezer compartment
door.
In case you do not want to perform the procedures above, call the nearest brand-mark
service. Technicians will accomplish the refitting expertly for charge.
32
Door reversal
After reversing the door, make sure the
magnetic seal adheres to the cabinet.
If the room temperature is cold (e.g. in
winter ), the seal may not adhere perfectly to the cabinet. In this case, wait
until the seal has softened on its own
or speed up the process by warming
the relevant part with a normal hairdryer.
T
TAW3MERA
T
TAW1MERA
T
TAW2MERA
33
Building-in
Dimensions of the recess
It is necessary that the niche is provided with a
conduct of ventilation having the following
dimensions:
Depth 50 mm
Width 540 mm
tus). If the door rabbet is provided for on the
left side, please carry out the relevant assembly steps on the opposite side.
1BL80R
1. Make the adjustments.
Compartment levelling
100
2. Cut the side trim (E).
MAU2ME
Door removal
The following assembly steps only apply for
doors with rabbet on the right side (supply sta-
FAL2MERA
34
3. Apply the side trim (E).
6. Apply the hole covers.
FAL3MERA
4. Insert the appliance.
SAB1ME
7. Fit the decorative panel.
PL09
5. Fix the appliance.
PL12
8. Fitting the handle.
PL13
35
9. Refit the door.
TE1MERA
10. Door alignment (if necessary).
36
37
38
39
40
41
42
Thermostaat die afgesteld moet worden
43
44
45
De koelkast is te warm
Het is te koud in de koelkast.
46
47
48
49
T
TAW3MERA
T
TAW1MERA
T
TAW2MERA
50
1BL80R
1. Maak de aanpassingen.
51
FAL2MERA
PL09
PL12
52
PL13
9. Bevestiging van de deur .
TE1MERA
53
54
55
56
57
58
59
Korrekte Temperatur
60
61
62
Der Kompressor läuft ständig
63
64
65
66
T
TAW3MERA
T
TAW1MERA
T
TAW2MERA
67
68
FAL2MERA
PL09
PL12
69
PL13
TE1MERA
F/De/7. (09.)
200382791
2009. 05. 28.
70
71
Service Consommateurs De Dietrich
BP 9526
95069 CERGY PONTOISE CEDEX
72

advertisement

Key Features

  • Integrated design for seamless kitchen integration
  • Advanced cooling system for precise temperature control
  • Spacious interior with adjustable shelves and door balconies
  • Energy-efficient operation to reduce environmental impact
  • Reversible door for flexible installation options
  • Adjustable thermostat for customized cooling
  • Easy-to-clean interior for maintaining hygiene
  • Quiet operation for a peaceful kitchen environment

Related manuals

Frequently Answers and Questions

How do I adjust the temperature of the refrigerator?
You can adjust the temperature using the thermostat knob located inside the refrigerator compartment.
Can I change the direction of the door opening?
Yes, the door is reversible and can be opened from either the left or right side for convenient access.
How often should I defrost the refrigerator?
Regular defrosting is not required as the refrigerator has an automatic defrost function.
What is the recommended temperature range for storing fresh food?
The ideal temperature range for fresh food is between 3°C and 5°C.
Can I store frozen food in the refrigerator compartment?
No, the refrigerator compartment is not suitable for storing frozen food. Frozen food should be stored in the freezer compartment.
Download PDF

advertisement

Table of contents

Languages

Only pages of the document in English were displayed