Ibiza Light & Sound DJLIGHT60 Instruction manual

The Ibiza Light DJLIGHT60 is a versatile lighting fixture designed for indoor use. It combines two PAR-style lights with 12 RGBW LEDs each and two moon-style lights with 60 RGBWA LEDs each. Control options include auto, master/slave, DMX, and remote control. It also features a built-in sound-activated mode, allowing the lights to synchronize with music.

PDF

Document

1
&copy;Copyright LOTRONIC 2016
GB
Unpacking Instructions
Immediately upon receiving a fixture, carefully unpack the carton, check the contents to ensure that all parts are
present and have been received in good condition. Notify the freight company immediately and retain packing
material for inspection if any parts appear to be damaged from shipping or the carton itself shows signs of
mishandling. Keep the carton and all packing materials. In the event that a fixture must be returned to the
factory, it is important that the fixture be returned in the original factory box and packing.
Safety Instructions
Please read these instructions carefully, they include important information about the installation, usage and
maintenance of this product.
• Please keep this User Guide for future reference. If you sell the unit to another user, be sure that he also
receives this instruction booklet.
• Always make sure that you are connecting to the proper voltage, and that the line voltage you are connecting
to is not higher than that stated on the decal or rear panel of the fixture.
• This product is intended for indoor use only!
• To prevent risk of fire or shock, do not expose fixture to rain or moisture. Make sure there are no flammable
materials close to the unit while operating.
• The unit must be installed in a location with adequate ventilation, at least 1m from adjacent surfaces. Be sure
that no ventilation slots are blocked.
• Always disconnect from power source before servicing or replacing fuse and be sure to replace with same fuse
size and type.
• Maximum ambient temperature (Ta) is 104&deg; F (40&deg;C). Do not operate the fixture at temperatures higher than
this.
• In the event of a serious operating problem, stop using the unit immediately. Never try to repair the unit by
yourself. Repairs carried out by unskilled people can lead to damage or malfunction. Please contact the nearest
authorized technical assistance center. Always use the same type of spare parts.
• Make sure the power cord is never crimped or damaged.
• Never disconnect the power cord by pulling or tugging on the cord.
• Avoid direct eye exposure to the light source while it is on.
• DISCONNECT DEVICE: Where the MAINS plug or an appliance coupler is used as the disconnect device, the
disconnect device shall remain readily operable.
• The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a
similar qualified person.
Specifications
Voltage ................................................................................... 220-240V AC~ 50/60Hz
Consumption ....................................................................................................... 60W
PAR light source: ........................................................................ 12 x 1W (RGBW) x 2
MOON light source: ............................................................... 60 x 50mm RGBWA x 2
DMX channels ...................................................................................................... 9/19
Control modes ..................................................... Auto, Master/Slave, DMX, Remote
Power cable ........................................................................................................... 4m
Packing Size......................................................................................... 75 x 25 x 14cm
Weight ................................................................................................................ 5.6kg
2
&copy;Copyright LOTRONIC 2016
Power supply, wire Connection
Use a dedicated plug to connect the LED light and power. Make sure the unit is connected to the appropriate
power supply.
Installation of the units
Before positioning the light, ensure the stability of the installation site. Drive the screw into the screw hole on
the stand. Make sure that the units can’t fall from the stand. The manufacturer cannot be held responsible for
damages due to bad installation of the units.
Warning
Carry the lights only by the handle.
Features
The control panel features 4 buttons and a 4-digit LED display.
Operation
1) When power is on, the digital LED display works with red dots.
When a DMX signal is present, the dot will be shiny.
2) DMX address code setting: Press “MENU” button. When the digital LED displays d001-d512, press “UP” or
“Down” to set the address code. The code ranges from 001-512.
↔
Button Specifications:
Aut
AutP
↓
Sou
↓
dnH
↓
SLA
↔
↔
↔
AutF
AutN
SouP
SouF
SouN
D001/d512
↔
↔
↔
↔
↔
↔
↔
SLAu
Connection of Signal Cable
You can use the 3-pin XLR cable to connect the OUT socket of the first light and the IN socket of the following
light. Connect all the lights as below:
3
&copy;Copyright LOTRONIC 2016
A DMX signal terminator is recommended on the last unit of the chain. DMX terminator is a XLR connector with
a 120Ω resistor between the pin 2 and pin 3 of the XLR connector
Remote Control:
ON/OFF: ON/OFF
DMX: DMX Mode
AUTO MIX: Auto Mode with PAR-Moon Effects
SOUND MIX: Sound Mode with PAR-Moon Effects
PAR JUMP: Color Jump of PAR can
PAR: Auto Mode of PAR can
PAR: Sound Mode of PAR can
GRADUAL: Gradual Change of PAR Light
LED: Auto Mode of Moon Light Effects
LED: Sound Mode of Moon Light Effects
FLASH: Flash Effects of Par Light
COLOR -/+: Browses through the colors
SEN -/+: Increases/decreases the sound sensitivity in sound controlled mode
Description
Off
Au01/Au03
AP01/AP08
AF01/AF03
Sn01/Sn03
SP01/SP08
SF01/SF03
Speed
Strobe
Master Dimmer
R
G
B
W
Choose Gobos for Moon Light (32 gobos)
19 DMX Channels
Channels
Value
Function
4
&copy;Copyright LOTRONIC 2016
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
CH9
CH10
CH11
CH12
CH13
CH14
CH15
CH16
CH17
CH18
CH19
0-9
Off
10-36
Au01/Au03
37-108
AP01/AP08
109-135
136-162
163-234
235-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
0-255
Fixture Cleaning
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize
light output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or
particularly dirty surrounding can cause greater accumulation of dirt on the unit’s optics.
• Clean with soft cloth using normal glass cleaning fluid.
• Always dry the parts carefully.
• Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
VII. Trouble-shooting
Problem
No display when power is on
Light is out of control
The light is off after working for a while
The beam is dark
Solution
1. Check if the power is correctly connected.
2. Check the outlet is powered
1. Check if the DMX address code is correctly set.
2. Check if the DMX cable is correctly connected.
1. Check if the sensor is soldered on the LED PCB
2. Check if the temperature is too high or not.
3. Check if Power supply is damaged.
1. Check if the temperature is too high and cause a fast fade.
2. Check if there are too much dust on the surface of light.
5
&copy;Copyright LOTRONIC 2016
This marking indicates that this product should not be disposed with other household wastes throughout
the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable reuse of material resources. To return your used device,
please use the return and collection systems or contact the retailer where the product was purchased. They can
take this product for environmental safe recycling.
Menu
Aut
↓
Sou
↓
dnH
↓
SLA
↔
↔
↔
↔
↔
↔
↔
↔
↔
↔
↔
SLAu
0-255
0-255
Variateur vert
8
&copy;Copyright LOTRONIC 2016
CH7
0-255
CH8
0-255
0-255
CH9
CH5
0-255
CH6
0-255
Variateur vert
CH7
0-255
CH8
0-255
0-255
CH10
0-255
R1
CH11
0-255
G1
CH12
0-255
B1
CH13
0-255
W1
0-255
Y1
CH15
0-255
R2
CH16
0-255
G2
CH17
0-255
B2
CH18
0-255
W2
0-255
Y2
CH9
CH14
CH19
&copy;Copyright LOTRONIC 2016
10
&copy;Copyright LOTRONIC 2016
↓
Sou
↓
dnH
↔
↔
↔
AutP
AutF
AutN
SouP
SouF
SouN
D001/d512
↔
↔
↔
↔
↔
↔
↔
&copy;Copyright LOTRONIC 2016
↓
SLA
↔
19CH
SLAu
&copy;Copyright LOTRONIC 2016
CH2
CH3
CH4
0-255
0-255
0-255
CH5
0-255
CH6
0-255
0-255
CH8
0-255
CH9
0-255
CH7
CH5
0-255
CH6
0-255
0-255
CH8
0-255
CH9
0-255
CH10
0-255
R1
CH11
0-255
G1
CH12
0-255
B1
CH13
0-255
W1
0-255
Y1
CH15
0-255
R2
CH16
0-255
G2
CH17
0-255
B2
CH18
0-255
W2
0-255
Y2
CH7
CH14
CH19
Kein Display
Problem
↔
Menu punten:
Aut
AutP
↓
Sou
↓
dnH
↓
SLA
↔
↔
↔
AutF
AutN
SouP
SouF
SouN
D001/d512
↔
↔
↔
↔
↔
↔
↔
SLAu
15
&copy;Copyright LOTRONIC 2016
0-255
&copy;Copyright LOTRONIC 2016
CH6
0-255
Groen dimming
CH7
0-255
Blauw dimming
0-255
0-255
CH8
CH9
19 DMX Kanalen:
Kanaal Waarde
0-9
10-36
37-108
CH 1
109-135
136-162
163-234
235-255
CH2
0-255
CH3
0-255
CH4
0-255
CH5
0-255
Rood dimming
CH6
0-255
Groen dimming
CH7
0-255
Blauw dimming
0-255
CH9
0-255
CH10
0-255
R1
CH11
0-255
G1
CH12
0-255
B1
0-255
W1
CH14
0-255
Y1
CH15
0-255
R2
CH16
0-255
G2
CH17
0-255
B2
CH18
0-255
W2
CH19
0-255
Y2
CH8
CH13
Oplossing
1. Controleer voedingsaansluiting
2. Controleer stopcontactdoos
17
&copy;Copyright LOTRONIC 2016
Donker straal
↓
Sou
↓
dnH
↓
SLA
↔
↔
↔
↔
AutP
AutF
AutN
SouP
SouF
SouN
D001/d512
↔
↔
↔
↔
↔
↔
↔
SLAu
&copy;Copyright LOTRONIC 2016
CH2
CH3
CH4
CH5
0-255
CH6
0-255
CH7
0-255
CH 1
20
&copy;Copyright LOTRONIC 2016
CH8
0-255
CH9
0-255
Izbira Gobo za Moon (32 gobo)
19 DMX kanali:
Kanal
Vrednost
0-9
10-36
37-108
CH 1
109-135
136-162
163-234
235-255
CH2
0-255
CH3
0-255
CH4
0-255
CH5
0-255
CH6
0-255
CH7
0-255
CH8
0-255
CH9
0-255
CH10
0-255
R1
CH11
0-255
G1
CH12
0-255
B1
CH13
0-255
W1
CH14
0-255
Y1
CH15
0-255
R2
CH16
0-255
G2
CH17
0-255
B2
CH18
0-255
W2
CH19
0-255
Y2
&copy;Copyright LOTRONIC 2016
ES
22
&copy;Copyright LOTRONIC 2016
↔
↓
Sou
↓
dnH
↓
SLA
↔
↔
↔
AutF
AutN
SouP
SouF
SouN
D001/d512
↔
↔
↔
↔
↔
↔
↔
SLAu
23
&copy;Copyright LOTRONIC 2016
CH 1
CH2
Valor
0-9
10-36
37-108
109-135
136-162
163-234
235-255
0-255
&copy;Copyright LOTRONIC 2016
CH3
CH4
0-255
0-255
CH5
0-255
Variador Rojo
CH6
0-255
Variador Verde
CH7
0-255
Variador Azul
CH8
0-255
CH9
0-255
CH2
CH3
CH4
Valor
0-9
10-36
37-108
109-135
136-162
163-234
235-255
0-255
0-255
0-255
CH5
0-255
Variador Rojo
CH6
0-255
Variador Verde
CH7
0-255
Variador Azul
CH8
0-255
CH9
0-255
CH10
0-255
R1
CH11
0-255
G1
CH12
0-255
B1
CH13
0-255
W1
CH14
0-255
Y1
CH15
0-255
R2
CH16
0-255
G2
CH17
0-255
B2
CH18
0-255
W2
CH19
0-255
Y2
CH 1
26
&copy;Copyright LOTRONIC 2016">

Hello! I've reviewed the Ibiza DJLIGHT60 instruction manual. I'm ready to answer your questions about this party LED light set, including its features like DMX control, multiple operating modes (Auto, Master/Slave, DMX, Remote), and troubleshooting tips. Ask away!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

It looks like you''ve reached a document that is written in multiple languages, including one that isn''t your native language. You can use the following links to temporarily hide pages without the language you prefer.

Key features

12 x 1W RGBW PAR Light Source and 60 x 50mm RGBWA MOON Light Source
9/19 DMX channels for flexible control
Auto, Master/Slave, DMX, and Remote Control Modes
Sound-activated mode for dynamic light shows
Built-in gobo patterns for Moon Light effects
Easy installation and setup with a dedicated stand
Compact size and lightweight design for portability

Frequently asked questions

It has 9/19 DMX channels for flexible control.

It can be controlled via Auto, Master/Slave, DMX, and Remote Control Modes.

Yes, It has both PAR and MOON Effects

Yes, It has a dedicated sound-activated mode which can be enabled for dynamic light shows that react to external sound.

User questions

James S.

How to set the DMX address?

Use the 'MENU' button and up/down buttons to adjust the address between 001 and 512.

James S.

What are the remote control's options?

The remote controls power, DMX mode, Auto and Sound modes (with PAR and Moon effects), color changes (jump and gradual for PAR lights), and strobe effects. It also allows adjusting color and sound sensitivity.