Hama FreeStereo Twins, 00173858 Instructions for use

00
173858
“FreeStereo Twins”
Bluetooth-Headset
A
1
2
3
4
5
6
7
B
10
9
8
C
+
/
D
/
/
-
/
G Operating instruction
Controls and Displays
1. Microphone
2. Volume Control (-)
3. Status LED
4. Volume Control (+)
5. Multi-Function Key
6. Ear Hook
7. Ear pads
8. Charging contacts
9. Status LED of charging box
10. Charging Socket
Thank you for choosing a Hama product.
Take your time and read the following instructions and information
completely. Please keep these instructions in a safe place for
future reference. If you sell the device, please pass these operating
instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazardås and risks.
Note
This symbol is used to indicate additional information or
important notes.
2
2. Package Contents
• 1x FreeStereo Twins Bluetooth headset
• 1x USB charging Cable
• 1x Charging box
• 4x Ear pads
• 3x Ear Hook
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use only.
• Protect the product from dirt, moisture and overheating, and only
use it in a dry environment.
• Do not allow yourself to be distracted by the product, for example
when driving a vehicle or operating sports equipment. Always pay
attention to the surrounding traffic and your environment.
• Do not drop the product and do not expose it to any major
shocks.
• Do not operate the product outside the power limits given in the
specifications.
• Do not open the device or continue to operate it if it becomes
damaged.
• Since the battery is integrated and cannot be removed, you will
need to dispose of the product as a whole. Do this in compliance
with the legal requirements.
• Dispose of packaging material immediately according to locally
applicable regulation.
• Do not modify the product in any way. Doing so voids the
warranty.
3
Warning – Rechargeable battery
• Only use suitable charging devices or USB connections for
charging.
• As a rule, do not charge devices or USB connections that are
defective and do not try to repair them yourself.
• Do not overcharge the product or allow the battery to
completely discharge.
• Avoid storing, charging or using batteries in extreme
temperatures.
• We suggest to fully charge the item for at least one time in
two months
Warning – Loud volume
• Using this product limits your perception
of ambient noise. For this reason, do not
operate any vehicles or machines while
using this product.
• Always keep the volume at a reasonable
level. Loud volumes, even over short
periods, can cause hearing loss.
4
4. Getting Started
• The two headsets and the charging box are equipped with a
rechargeable battery. The battery must be fully charged before
using the device for the first time.
• You can charge the headsets directly using the charging box,
or charge the battery of the charging box. This allows you to
charge the headset batteries while on the go, without an external
power supply. In other words, the charging box is used as mobile
power storage.
Note
Use only the supplied USB charging cable!
4.1 Charging the headsets
• Ensure that the headsets are switched off before charging them.
• Place both headsets in the charging box.
• Charging of the headsets will start automatically if the battery of
the charging box still has sufficient charge.
• If not, begin charging by connecting the included USB charging
cable to the charging terminal (10) and to the USB connection of
a suitable USB charger. Please refer to the operating instructions
for the USB charger used.
• The status LEDs (3) of the headsets emit a constant red light
during charging.
• It takes about one hour to charge a headset battery.
• When a headset’s battery is fully charged, the light emitted by the
status LED (3) of the headset goes out.
• You can now remove the headset.
5
4.2 Charging the charging box
• Begin charging by connecting the included USB charging cable
to the charging terminal (10) and to the USB connection of a
suitable USB charger. Please refer to the operating instructions for
the USB charger used.
• The status LED of the charging box (9) emits a constant red light
during charging.
• Charging the battery fully may take up to 2 hours.
• When the battery is fully charged, the status LED (9) goes out.
• Disconnect all cable and mains connections after use.
Note
• If the headset batteries and the charging box battery are
empty, the headset batteries will be recharged first. After that,
the battery of the charging box will be charged (lights emitted
by the status LEDs (3) of the headsets go out; status LED (9) of
the charging box continues to emit a red light).
• A charging box battery that has been fully charged allows you
to completely charge both headsets about four times.
5. Operation
5.1 Switching the headset on/off
• Turn On:
With the device off, press and hold the multifunction button
(5) for 6 seconds until you hear a voice say “Power on”. The
status LED (3) initially emits blue flashes of light and then a red
flash of light.
• Turn Off:
With the device on, press and hold the multifunction button (5)
for 4 seconds until you hear a voice say “Power off”. The status
6
LED (3) will light up in red briefly before the device turns off.
The first time the device is turned on, pairing is automatically started
– see 5.2 Bluetooth pairing – Headsets.
5.2. Bluetooth pairing – Headsets
• First the two headsets must connect to one another.
• Ensure that both headsets are switched off.
• Press and hold the multifunction button (5) on both headsets for
approximately eight seconds until the status LEDs (3) begin to
alternate between a red and blue light.
• The headsets automatically pair with one another within about
ten seconds. After that, you can connect the headsets to a
terminal device.
• If the two headsets cannot set up a connection within two
minutes, they will automatically switch off.
Note
• Once the headsets have correctly paired with one another,
one headset will automatically be guided by the headset that
was switched on/paired first.
• Therefore, when connecting the headsets to terminal devices
in future, you merely have to switch on both headsets and put
one of the headsets into pairing mode. The other headset is
automatically connected.
7
5.3. Bluetooth pairing with terminal device
• The headsets and the terminal device should be no further than
one metre apart. The smaller the distance, the better.
• Ensure that both headsets are switched on and paired with one
another.
Note – Pairing
• Make sure that your Bluetooth-capable terminal device is on
and Bluetooth is activated.
• For more information, please refer to the operating
instructions of your terminal device.
• Open the Bluetooth settings on your terminal device and wait until
FreeStereo Twins appears in the list of Bluetooth devices found.
• Select FreeStereo Twins and wait until the headsets are listed as
connected in the Bluetooth settings on your terminal device.
Note – Bluetooth password
Some terminal devices require a password in order to connect to
another Bluetooth device.
• If your terminal device requests a password to establish the
connection, enter 0000.
8
Note
If pairing was successful, the status LEDs (3) emit blue flashes of
light every five seconds.
• You can now use the headsets.
5.4. Automatic Bluetooth connection
(after successful pairing)
Note
• Make sure that your Bluetooth-capable terminal device is on
and Bluetooth is activated.
• For more information, please refer to the operating
instructions of your terminal device.
• Ensure that the headsets are switched on.
• You can also switch just one of the headsets on. This headset
will automatically connect to the terminal device after successful
pairing. If the other headset is likewise switched on, it connects
to the headset that was switched on first and so is likewise
automatically paired with the terminal device.
• After the headset and terminal device have been paired, a
connection is established automatically.
• You can now use the headset/headsets.
9
Note
• If pairing was successful, the status LEDs (3) emit blue flashes
of light every five seconds.
• If pairing was not successful, the status LEDs (3) emit a flash
of light once every five seconds, and you will have to perform
pairing again.
• It may be necessary to change the settings on your terminal
device to enable it to automatically connect to the paired
headset.
Note – Connection impaired
After the headset and terminal device have been paired,
a connection is established automatically. If the Bluetooth
connection is not established automatically, check the following:
• Go to the Bluetooth settings on your terminal device and
check whether FreeStereo Twins are connected. If not,
repeat the steps listed under 5.3 Bluetooth pairing with
terminal device.
• Check whether obstacles are impairing the range. If so, move
the devices closer together.
• The performance can also be affected by a weak battery.
10
5.5. Audio playback
Note
• Note that support for certain key functions may vary
depending on your terminal device.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal
device.
•
•
•
•
•
•
Set the volume on your terminal device to a low level.
Start audio playback on the connected terminal device.
Press the volume control (+) (4) to increase the volume.
Press the volume control (-) (2) to reduce the volume.
Press and hold the volume control (+) (4) to skip to the next track.
Press and hold the volume control (-) (2) to skip to the previous
track.
11
5.6. Hands-free function
Note
• Note that support for certain key functions may vary
depending on your terminal device.
• For more information, please refer to the operating
instructions of your terminal device.
• Functions can still be controlled directly via the terminal
device.
Making a call
• Dial the number directly on your terminal device to make a call.
Accepting calls
• Press the multifunction button (5) once to answer an incoming
call.
Ending a call
• During a call, press the multifunction button (5) once to end
the call.
Redial
• Briefly press the multifunction button (5) twice to call the
last number.
12
Note – Call quality
To increase the call quality, make sure that you are near the
headsets with your mobile phone during the call.
5.7. Volume control and mute function
• Press the volume control (-) (2) to reduce the volume.
• Press the volume control (+) (4) to increase the volume.
5.8. Disconnecting the headset
• Switch the headset off.
• Disconnect the headset via the Bluetooth settings on your
terminal device.
5.9. Battery level
• To save energy, the headset automatically switches off if it is not
connected to a device for a certain time.
• When the headset’s battery level is low, a voice says “Low battery,
please charge” every 60 seconds, and the status LED (3) emits a
red flash of light three times.
• Charge the headset as described in 4. Getting Started.
• Press the volume control (-) (2) twice to find out the current
battery level.
13
Available
talk time
> 3,75 h
3,75 h – 0,75 h
< 0,75 h
Language
information
Status-LED (2)
„Battery high“
Blue
„Battery medium“
Blue
3x flashing
„Battery low“
Rot
3x flashing
3 seconds
Note
• Please note that the two headsets can have different battery
levels. You should therefore check the battery levels of the
headsets separately.
• However, the talk and standby times may vary when used
with different mobile phones or other compatible Bluetooth
devices, usage settings, usage styles and environments.
5.10. Reset/factory setting
Resetting to the factory default settings can solve some problems
and malfunctions.
• Press and hold the multifunction button (5) and the volume
control (-) (2) for approximately eight seconds to reset the headset
to factory settings.
• Note that the headset must not be paired with an end terminal
during the reset process.
14
6. Care and Maintenance
Only clean this product with a slightly damp, lint-free cloth and do
not use aggressive cleaning agents. Make sure that water does not
get into the product.
7. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and provides no
warranty for damage resulting from improper installation/mounting,
improper use of the product or from failure to observe the operating
instructions and/or safety notes.
8. Service and Support
Please contact Hama Product Consulting if you have any questions
about this product.
Hotline: +49 9091 502-115 (German/English)
Further support information can be found here:
www.hama.com
15
9. Technical Data
Bluetooth Headset
Bluetooth technology
Bluetooth V4.1
Supported profiles
A2DP, AVRCP, HSP, HFP
Range
< 10 m
Charging box battery
Input
5V
Output
4,65 V
340 mA
340 mA
Battery type
Li-ion 3,7 V / 420 mAh
Charging time
~ 2h
Battery for each headset
16
Battery type
Li-ion 3,7 V / 40 mAh
Charging time
~ 1h
10. Recycling Information
Note on environmental protection:
After the implementation of the European Directive
2012/19/EU and 2006/66/EU in the national legal
system, the following applies: Electric and electronic
devices as well as batteries must not be disposed of with
household waste. Consumers are obliged by law to
return electrical and electronic devices as well as batteries at the end
of their service lives to the public collecting points set up for this
purpose or point of sale. Details to this are defined by the national
law of the respective country. This symbol on the product, the
instruction manual or the package indicates that a product is subject
to these regulations. By recycling, reusing the materials or other
forms of utilising old devices/Batteries, you are making an important
contribution to protecting our environment.
11. Declaration of Conformity
Hereby, Hama GmbH & Co KG declares that the radio
equipment type [00173858] is in compliance with
Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet address:
www.hama.com -> 00173858 -> Downloads.
Frequency band(s)
2402 - 2480MHz
Maximum radio-frequency power
transmitted
< 10mW EIRP
17
19
20
23
24
25
26
27
28
29
Sprachinformation
Status-LED (2)
„Battery high“
Blau
„Battery medium“
Blau
3 Sekunden
3x blinken
„Battery low“
Rot
3x blinken
30
31
Bluetooth Headset
Bluetooth Technologie
Bluetooth V4.1
A2DP, AVRCP, HSP, HFP
< 10 m
Akku Ladebox
5V
4,65 V
340 mA
340 mA
Batterietyp
Li-ion 3,7 V / 420 mAh
~ 2h
Batterietyp
Li-ion 3,7 V / 40 mAh
~ 1h
Akku je Headset
32
2402 - 2480MHz
< 10mW EIRP
33
35
36
38
39
40
41
42
44
45
Message vocal
„Battery high“
Bleu
„Battery medium“
Bleu
clignote 3x
„Battery low“
Rouge
clignote 3x
46
47
Micro-casque Bluetooth
Technologie Bluetooth
Bluetooth V4.1
A2DP, AVRCP, HSP, HFP
5V
4,65 V
340 mA
340 mA
Type de pile
Lithium-Ion 3,7 V / 420 mAh
~ 2h
Batterie de chaque micro-casque
48
Lithium-Ion 3,7 V / 40 mAh
~ 1h
2402 - 2480MHz
< 10mW EIRP
49
51
52
54
55
57
58
60
61
„Battery high“
Azul
3 segundos
„Battery medium“
Azul
„Battery low“
Rojo
62
63
9. Datos técnicos
Headset Bluetooth
Tecnología Bluetooth
Bluetooth V4.1
A2DP, AVRCP, HSP, HFP
5V
4,65 V
340 mA
340 mA
Lithium-Ion 3,7 V / 420 mAh
64
Lithium-Ion 3,7 V / 40 mAh
~ 1h
2402 - 2480MHz
65
66
67
68
70
71
Gesproken
informatie
Status-LED (2)
„Battery high“
Blauw
3 seconden
„Battery medium“
Blauw
3x knipperen
„Battery low“
Rood
3x knipperen
77
78
9. Technische specificaties
Bluetooth-headset
Bluetooth-technologie
Bluetooth V4.1
Ondersteunde profielen
A2DP, AVRCP, HSP, HFP
< 10 m
Accu laadbox
Stroomverbruik
5V
Stroomlevering resp. capaciteit
4,65 V
340 mA
340 mA
Accutype
Li-ion 3,7 V / 420 mAh
~ 2h
Accutype
Li-ion 3,7 V / 40 mAh
~ 1h
Accu per headset
79
2402 - 2480MHz
Maximaal radiofrequent vermogen
80
81
82
84
85
86
87
88
89
91
92
Dioda LED
stanu (2)
„Battery high“
Niebieska
3 sekundy
„Battery medium“
„Battery low“
Rot
3x migają
93
94
Zestaw słuchawkowy
Bluetooth
Technologia Bluetooth
Bluetooth V4.1
A2DP, AVRCP, HSP, HFP
5V
4,65 V
340 mA
340 mA
Typ baterii
Lithium-Ion 3,7 V / 40 mAh
~ 1h
95
2402 - 2480MHz
Maksymalna moc transmisji
96
"The Bluetooth® word mark and logos are registered trademarks
owned by the Bluetooth SIG, Inc. and any use of such marks by
Hama GmbH & Co KG is under license. Other trademarks and trade
names are those of their respective owners."
All listed brands are trademarks of the corresponding companies.
Errors and omissions excepted, and subject to technical changes.
Our general terms of delivery and payment are applied.
00173858/11.16
Hama GmbH & Co KG
86652 Monheim / Germany
www.hama.com