D-Link Express EtherNetwork DI-604 User manual

Add to My manuals
67 Pages

advertisement

D-Link Express EtherNetwork DI-604 User manual | Manualzz
This product can be set up using any current
web browser, i.e., Internet Explorer 5x,
Netscape Navigator 4x.`
DI-604
Express EtherNetwork™
Broadband Router
Before Your Begin
1. If you purchased this router to share your high-speed Internet connection with
other computers, you must have either an Ethernet-based Cable or a DSL modem
with an established Internet account from an Internet Service Provider (ISP).
2. It’s best to use the same computer that is connected to your modem for
configuring the DI-604 router. The DI-604 Router acts as a DHCP server and will
assign all the necessary IP address information on your network. See Appendix
at the end of this Quick Installation Guide or the Manual on the CD-ROM for
setting each network adapter to automatically obtain an IP address.
Check Your Package Contents
These are the items included with your DI-604 purchase:
• DI-604 Ethernet Broadband Router
• CD-ROM (containing Manual and Warranty)
• Ethernet (CAT5 UTP/Straight-Through) Cable
• 5V DC, 2A Power Adapter
If any of the above items are missing, please contact your reseller.
Using a power
supply with a
different voltage rating
will damage and void
the warranty for this
product.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
Connecting The DI-604 Broadband Router
To Your Network
A. First, connect the power adapter to the receptor at the back panel of
the DI-604 and then plug the other end of the power adapter to a wall
outlet or power strip. The Power LED will turn ON to indicate proper
operation.
B. Insert one end of an Ethernet cable to the WAN port on the back
panel of the DI-604 and the other end to the Ethernet port located on
your Cable or DSL modem. The WAN LED light will illuminate to
indicate proper connection.
C. Insert one end of an Ethernet cable to LAN port 1 on the back panel
of the DI-604 and the other end to an available Ethernet port on the
network adapter in the computer you will use to configure the DI-604.
The LED light for LAN Port 1 will illuminate to indicate proper
connection. (Note: Some computers already have network adapters
pre-installed.)
B. WAN Port
Reset Button
This is the
Pressing this button
connection for the
restores the router
Ethernet Cable to
to its original factory
default settings.
Ethernet Port on the
Cable or DSL
Modem.
C. LAN Ports
These are the
connections for
Ethernet cables to
your Ethernetenabled computers
Restart Your Computer
A. Receptor for
Power Adapter
Connecting Additional Computers To The
DI-604 Broadband Router
Using additional Ethernet (CAT5 UTP/Straight-Through) cables, connect
your Ethernet-equipped computer(s) to one of the 3 remaining Ethernet
LAN ports on the back panel of the DI-604.
LAN Port LEDs. Each of the
LAN ports on the back of the
DI-604 have a corresponding
LED light on the front panel
of the unit. When a proper
connection has been made
to a computer that is ON, the
LED on the front panel
should illuminate.
When you have completed the steps in this Quick Installation Guide, your
connected network should look similar to this:
Cable or DSL
Modem
DI-604 Ethernet
Broadband Router
Computers connected
to the LAN Ports
Using The Setup Wizard
Open your Web
browser and type
“http://192.168.0.1” into
the URL address box.
Then press the Enter or
Return key.
The logon pop-up
screen will appear.
Type “admin” for the
username and leave the
password field blank.
Click OK
Once you have
logged in, the
Home screen
will appear.
Click Run Wizard
You will see the following screens.
Click Next
Step 1 - Set up your new password. You have the option to establish a password.
Click Next
The Setup Wizard (continued)
Select the type of Internet connection for your router.
Select one
of these
settings
If you are unsure of which setting to
select, please contact your Internet
Service Provider.
Click
Next
If you selected Dynamic
IP Address, this screen
will appear:
Click the “Clone MAC
Address” button to
automatically copy the
MAC address of the
network adapter in your
computer. You can also
manually type in the
MAC address.
Click Next
What is a MAC address? Each
network adapter has a discrete
Media Access Control (MAC)
address. Note that some computers
and peripherals may already include
built-in network adapters.
If your ISP requires a Static IP
Address, and this option is
selected, then this screen will
appear:
Do not use
Donumbers
not use
the
numbers
displayedthe
in these
displayed
fields.
They in
arethese
only
Enter the IP address
information originally
provided to you by your
ISP. You will need to
complete all the required
fields.
Click Next
If your ISP uses PPPoE (Point-toPoint Protocol over Ethernet) and
this option is selected, then this
screen will appear:
Enter in the username
and password provided
to you by your ISP.
Click Next
fields.asThey
are only
shown
an example.
shown as an example.
Your Setup is Complete!
Click Restart
Test Your Internet Connection
Click Exit
Relaunch your Web browser (i.e.,
Internet Explorer or Netscape
Navigator), to link to your favorite
Web site to test your Internet
connection.
For additional settings or
information, refer to the
Advanced, Tools, or Status tabs
on the web-management interface;
or to the manual located on the
CD-ROM.
APPENDIX
To connect to the network, make sure
the network adapter in your computer
is configured properly. Here’s how to
configure the network adapter to obtain
an IP address automatically for the
DI-604 Broadband Router.
For Microsoft Windows XP:
Go to Start > right click on
My Network Places >
select Properties > Double-click on
the Network Connection associated
with the Ethernet adapter (i.e.,
D-Link DFE-530TX+).
Click Internet Protocol (TCP/IP)
Click Properties
Select Obtain an IP address
automatically
Click OK
Restart your
computer
For Apple Macintosh OS X:
Go to the Apple Menu
and Select System
Preferences.
Select Built-in
Ethernet in the Show
pull-down menu
Select Using DHCP
in the Configure pulldown menu
Click on
Apply Now
The IP address information,
the Subnet Mask, the Router’s
IP address and the Ethernet
adapter address will appear.
Click on
Network
Technical Support
You can find the most recent software and user
documentation on the D-Link website.
D-Link provides free technical support for customers
within the United States for the duration of the
warranty period on this product.
U.S. customers can contact D-Link technical support
through our web site or by phone.
D-Link Technical Support over the Telephone:
(800) 758-5489
24 hours a day, seven days a week
D-Link Technical Support over the Internet:
http://support.dlink.com
email: [email protected]
DI-604
Express EtherNetwork™
Breitband-Router
Unter Macintosh OS X:
DI-604
Routeur à large bande
Express EtherNetwork™
Redémarrez votre ordinateur
Modem DSL
ou câble
DI-604
Express EtherNetwork ™
Enrutador de banda ancha
• Enrutador de banda ancha
Ethernet DI-604
Módem por
cable o DSL
Enrutador de banda
ancha DI-604
Haga clic
en
Aceptar
Haga clic en
Restart
(Reiniciar)
Para Apple Macintosh OS X:
Haga clic
en
Network
Seleccione Built-in
Ethernet en el menú
desplegable Show
Haga clic en
Apply Now
DI-604
Express EtherNetwork™
Broadband Router
• Router wireless Broadband DI-604
Se uno dei componenti dovesse risultare mancante, contattare il rivenditore.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
Modem Cable
o DSL
Router Ethernet a
banda larga DI-604
Il programma Setup Wizard
Aprire il browser web e
inserire
“http://192.168.0.1” nel
campo URL address.
Premere Invio.
Cliccare su
Next
Cliccare
su Next
Cliccare su
Next
Cliccare su
Next
Cliccare su
Next
Cliccare su
Restart
Selezionare Obtain an IP address
automatically
Cliccare su
OK
Per Apple Macintosh OS X:
Selezionare Apple Menu
e System
Preferences.
Selezionare Built-in
Ethernet dal menu a
cascata Show
Cliccare su
Apply Now
Cliccare
su on
Network
DI-604
Если что-то из перечисленного выше отсутствует, то свяжитесь с поставщиком.
©2002 D-Link Systems, Inc. All rights reserved. Trademarks or registered trademarks are the property of their respective
holders. Software and specifications subject to change without notice. DI-604.05082002
Шлюз широкополосного
доступа DI-604
LAN
Щелкните по OK
Щелкните по Next
Щелкните по Next
Щелкните по Next
Щелкните по Next
Щелкните по Next
Щелкните по Next
Щелкните по Restart
Щелкните по
Выберите Obtain an IP
address automatically
Щелкните по OK
Для Apple Macintosh OS X:
Пройдите Apple Menu
и выберите System
Preferences.
В ниспадающем меню Show
выберите Built-in Ethernet
Щелкните
по Apply
Щелкни
те по
Network

advertisement

Related manuals

Download PDF

advertisement

Languages

Only pages of the document in English were displayed