advertisement
▼
Scroll to page 2
of 32
USER’S MANUAL E-ZI READER 6 in 1 Card Reader USB 2.0 Introduction: The E-ZI READER 6 in 1 Card Reader/Writer can support the SD/MMC/ MS/CF/MD/SM Memory Card. ACR61N_V1.1.01102002 Index Page Introduction……………………………………………………………… Features…………………………………………………………………. Specification………………………………………….………………….. Requirements……………………….…………………………………… Package contents………………………………….……………………. 1 1 1 2 2 Chapter 1 Hardware Installation………………….…………………………………… 3 Chapter 2 Software Installation…...……………………………..…………………….. Windows XP…………………..…………..……………………..………… Windows 2000…..………………………………………………………….. Windows 98SE………………………..………….….…….……………….. Unplug 6in1 Card Reader…..………………………………………………. Notice…..………………………………………………….……………… Mac OS…………………………………………………………………….. 5 5 6 8 13 13 14 Appendix Software Update…………… Card Reader……………………………………….………………………. Card Reader Write-Protect Switch…………………….……………………. USB Speed………………………………………..………………………. Abbreviations……………………………………………………………….. Keyed Connector Protocol…………………………..……………………… 15 16 16 17 18 19 Introduction: The USB 6in1 Card Reader/Writer is a highly integrated, flexible application USB 2.0 Multi-Interface Flash Card Reader, support different kinds of multi-interface combinations. For the best performance consideration, can support the SD/MMC/ MS/CF/MD/SM Memory Card. The Universal Serial Bus (USB) interfaced peripherals to your computers. The USB complies with Universal Serial Bus specification rev. 2.0, USB Storage Class specification ver.1.0, and flash card interface specification each. Features: Support USB 2.0. USB USB and ACPI compliant. Support USB High-Speed 480Mb/Sec or Full-Speed at 12Mb/sec. Truly Plug & Play automatic system configuration. OS Windows XP, Windows 2000, Windows ME, Windows 98SE Mac OS 8.6 / 9.X / 10.1.2 or above Power Only USB BUS power, no need other power supply. Specification: Interface Function Connector Cable Transfer Rate LED Power Enclosure EMI Universal Serial Bus (USB) Revision 2.0 device. Supports 8 ~ 256MB Secure Digital (SD) Card. Supports 8 ~ 128MB Multi Media Card (MMC) Card. Supports 4 ~ 128MB Memory Stick (MS) Card. Supports 4 ~ 512MB Compact Flash (CF) Card, Type I (CF). Supports 340MB/512MB/1GB IBM Micro Drive (MD)Type II (CF+). Supports 4 ~ 256MB Smart Media (SM) Card. Supports Hot-Swapping One CF/MD socket. One SD/MMC socket. One MS socket. One SM socket. One USB cable (A type male). One Extension USB cable (A (female) to A (male) type) USB transfer rate: High-Speed 480Mb/Sec. Data read/write speed: 700K to 3000 KBytes/sec Max. Power LED Active LED DC +5.0V from USB cable directly. Plastics. CE & FCC. Requirements: IBM PC/AT Compatible or Apple iMac. USB 2.0 Host card or USB 2.0 HUB device. Windows XP, Windows 2000, Windows ME, Windows 98SE Operating System. Packing contents: Please make sure that this package includes the following items. Item Quantity 6in1 Card Reader/Writer USB 2.0 One Software CD Driver include User’s Manual One USB Extension cable (A (female) to A (male) type) One Reminder This Product is achieve the USB 2.0 High-Speed, must be plugged in to USB 2.0 Host Port, Windows 2000 or Windows XP. If this product is plugged into the USB 1.1 Host port, this product will only have USB 1.1 Full-Speed. Warnings To avoid the compatibility causes 6in1 Card Reader product function problem. Please uninstall any other similar product then load the CD-Drive to CD-Rom to install the 6in1 Card Reader driver. Chapter 1 Hardware Installation: E-ZI READER 6 in 1 Card Reader/Writer 1. CF/MD Reader/Writer 2. SM Reader/Writer 1. 2. 3. 4. 3. MS Reader/Writer 4. SD/MMC Reader/Writer Compact Flash (CF) and IBM Micro Drive (MD) Card Reader/Writer Socket. Smart Media (SM) Card Reader/Writer Socket. Memory Stick (MS) Card Reader/Writer Socket. Secure Digital (SD) and Multi Media Card (MMC) Card Reader/Writer Socket. Warnings Do not insert or extract 6in1 Card Reader while the Active LED is flashing. Chapter 2 Software Installation: Supported OS Windows XP, Windows 2000, Windows ME, Windows 98SE (Windows XP and Windows ME works without driver) and Mac 8.6, 9.x, 10.1.2 or above (10.1.2 works without driver) are supported. The drivers supplied with this distribution are for Windows 2000 and 98SE only. Windows Me and XP have built in driver support for the Card Reader. Windows XP and Windows ME You do not need to install any driver if your computer’s O/S is Windows XP or Windows ME since the two OS come with the supporting driver. Turn On your computer, system will auto detect board and attempt load driver. You will see 4 new icons in your File Manager of your computer. Now you can start to use the Card Reader/Writer. Windows 2000 Step1:Insert the Installation CD into CD-ROM. Step2:Plug in your 6 in 1 Card Reader in USB Host, system will auto detect board and attempt load one “Removable Disk”. Step3:Double click “My Computer” and double click the CD-ROM icon. Step4:Double click “Driver” directory. Step5:Double click “Install.exe”, you will see a picture as the following. Step6:Choose click “YES” Step7:Choose click “OK” Step8:The driver has been setup successfully. Please re-start the computer. Step9:You will see 4 new icons when you double click “My Computer” after your PC restarted. Compact Flash (CF), Memory Stick (MS), Secure Digital (SD) Multimedia Card and IBM Micro Drive. Step10:To make sure the Successful installation, the “Card Reader 6in1” and “USB Mass Storage Disk Driver” device appeared when you check “System Properties” \ “Universal Serial Bus Controllers”. Windows 98SE Step1:Insert the Installation CD into CD-ROM. Step2:Plug in your 6 in 1 Card Reader in USB Host. Step3:Choose click “Next” Step4:Choose click “Next” Step5:Specify a Location “Driver” Windows 98SE Directory,choose click “Next” Step6:Choose click “Next” Step7:Choose click “Finish” Step8:The driver has been setup successfully. Please re-start the computer. Step9:You will see 4 new icons when you double click “My Computer” after your PC restarted. Compact Flash (CF), Memory Stick (MS), Secure Digital (SD) Multimedia Card and IBM Micro Drive. Step10:To make sure the Successful installation, the “Card Reader 6in1” and “USB Mass Storage Disk Driver” device appeared when you check “System Properties” \ “Universal Serial Bus Controllers”. Unplug 6in1 Card Reader After using 6in1 Card Reader, please choose one of the methods below according to your Windows to remove the Card Reader from USB port: Windows XP/2000/ME: From USB port directly once unplug the Card Reader from USB port directly once the green indicator off or stops blinking, and its icon would disappear automatically. Windows 98SE: Click the icon at the right down corner shown as below, and “Unplug or Eject Hardware” menu appears. Click the menu and the below window appears telling you “The Card Reader device can be safely remove from the system”. Click “OK” to close the window, then you can safely remove 6in1 Card Reader. Notice 1. Make sure your USB Host port can provide full 5V and 0.5A of electricity. 2. In order to achieve the USB 2.0 Speed for this Card Reader, must be plugged in to USB 2.0 Host and Windows 2000 or Windows XP. If this Card Reader is plugged into USB 1.1 Host, will only have USB 1.1 Speed. 3. Some Mainboard may have its OWN driver for the USB 2.0 Host drive, please make sure your Mainboard or PC manufacturer for update details. 4. For Apple Mac OS, the card reader’s icon will only appear after the memory card is inserted into this Card Reader. 5. The Memory Stick format specifications are different and incompatible under PC and DV. A Memory Stick formatted by DV cannot be read under PC and vice verse. Please refer to your DV manual for details. 6. Do not insert or extract 6in1 Card Reader while the Active LED is flashing. Besides, 6in1 Card Reader must be taken off before insertion or removal of the card reader. 7. To avoid the compatibility causes 6in1 Card Reader product function problem. Please uninstall any other similar product then load the CD-Drive to CD-Rom to install the 6in1 Card Reader driver. Mac OS In Mac 8.6 ~ 9.x: If your MAC O/S is 8.6 ~ 9.x, please follow the steps: Step1:Insert the CD into the CD-ROM. (Please don’t plug the Reader into the USB host before completing the driver installation) Step2:Open the “Mac” folder then open the “Driver” folder then copy the “GeneUSBMLV.Sit” file to your Mac HDD. Step3:Double click “GeneUSBMLV.Sit” to unzipping. Step4:Choose click “GeneUSBML” folder, than choose “8.6~9.0” or “9.0.4 later”. Step5:Choose click “Installer”, the driver will be installed automatically, please follow the instructions. Step6:After you complete the driver, please re-start the computer. Step7:After the computer is start, please plug the Card Reader/Writer into the USB host. When you insert a Flash Card, you will see an “untitled” HDD icon in the desktop. When you insert 2 Flash Cards, you will see 2 “untitled” HDD icons. When you insert 3 Flash Cards, you will see 3 “untitled” HDD icons. In Mac 10 above: If your MAC O/S is 10.1.2 above, you don’t need to install any driver. Please just plug the reader into the USB port then you can start to use the Flash Card Reader/Writer. GEBRUIKERSHANDLEIDING E-ZI READER USB 2.0 6 in 1 Kaart Lezer Introductie: De 6 in 1 Kaart Lezer/Schrijver kan de SD/MMC/ MS/CF/MD/SM geheugenkaart ondersteunen. ACR61N_V1.1.01102002 Hardware Installatie: 6 in 1 Kaart Lezer 1. CF/MD Lezer/Schrijver 2. SM Lezer/Schrijver 5. 6. 7. 8. 3. MS Kaart Lezer/Schrijver 4. SD/MMC Lezer/Schrijver Compact Flash (CF) en IBM Microdrive (MD) Kaart Lezer/Schrijver contactpunt. Smart Media (SM) Kaart Lezer/Schrijver contactpunt. Memory Stick (MS) Kaart Lezer/Schrijver contactpunt. Secure Digital (SD) en Multi Media Card (MMC) Kaart Lezer/Schrijver contactpunt. MODE D’EMPLOI Installation du Driver: OS Supporté: Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP ( Windows ME et Windows XP fonctionnent sans le driver ) et Mac 8.6, 9.X, 10.1.2 ( 10.1.2 fonctionne sans driver ) sont supportés. BENUTZUNGSANLEITUNG E-ZI READER USB 2.0 6 in 1-Kartenleser Einleitung: Der 6 in 1-Kartenleser unterstützt die SD/MMC/ MS/CF/MD/SM-Speicherkarten ACR61N_V1.1.01102002 Hardware-Installation: 6 in1-Kartenleser 1. CF/MD-Kartenleser/-schreiber 2. SM-Kartenleser/-schreiber 3. MS-Kartenleser/-schreiber 4. SD/MMC-Kartenleser/-schreiber 9. Kartenleser/-schreibersockel für Compact Flash (CF) und IBM Mikroantrieb (MD) 10. Sockel für Smart Media (SM) Kartenleser/-schreiber 11. Unterstützt den Steckspeicher (MS)-Kartenleser/-schreibersockel 12. Sockel für Secure Digital (SD) und Multi Media Card (MMC) Kartenleser/-schreiber Treiberinstallation: - Unterstütztes OS: Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP (Windows ME und Windows XP benötigen keinen Treiber) sowie Mac 8.6, 9.x; 10.1.2 (10.1.2 benötigt keinen Treiber) werden unterstützt. Windows 98 (98SE) und Windows 2000 Den Computer einschalten. Das System erkennt den 6 in 1-Kartenleser automatisch und versucht den Treiber zu installieren. Nicht "Weiter" sondern "Abbrechen" wählen. Schritt 1: Die Installations-CD ins CD-ROM Laufwerk einlegen. Schritt 2: Zweimal "Arbeitsplatz" klicken und das CD-ROM Symbol zweimal klicken. Schritt 3: Das "Driver"-Verzeichnis zweimal klicken. Schritt 4: “Setup.exe” zweimal klicken, so dass ein Bild wie folgendes erscheint. Schritt 5: Der Treiber wurde erfolgreich Installiert. Den Computer neu aufstarten. Schritt 6: Nach dem Aufstarten wird sind im "Arbeitsplatz" 4 neue Symbole sichtbar wenn dieser geklickt wird. Compact Flash (CF), Memory Stick (MS), Secure Digital (SD) Multimedia Card und IBM Mikroantrieb. Windows ME und Windows XP Falls das Operationssystem des Computer Windows ME oder XP ist, ist keine Treiberinstallation notwendig, da diese die notwendigen Treiber enthalten. Den Computer einschalten. Das System erkennt die Platine automatisch und versucht den Treiber zu laden. Im "Arbeitsplatz" des Computers sollten 4 neue Symbole sichtbar sein. Der Kartenleser/-schreiber ist nun verwendungsbereit. Schritt 1: Bei Windows XP kann der schrittweise automatische Erkennungsvorgang beobachtet werden: Neue Hardware gefunden – IC1100 V2.1E, USB-Massenspeichergerät, ICSI IC1100 CF USB-Gerät, Festplatte, ICSI IC1100 MS USB-Gerät, ICSI IC1100 MMC/SD USB-Gerät, ICSI IC1100 SM USB-Gerät, …, Die neue Hardware ist installiert und gebrauchsbereit. Schritt 2: Nach dem Aufstarten wird sind im "Arbeitsplatz" 4 neue Symbole sichtbar wenn dieser geklickt wird. Compact Flash (CF), Memory Stick (MS), Secure Digital (SD) Multimedia Card und IBM Mikroantrieb. MANUALE UTENTE ACR61N_V1.1.01102002 - Page 1 - MANUAL DO USUÁRIO - Page 2 - - Page 3 - - Page 4 - MANUAL DEL USUÁRIO E-ZI READER USB 2.0 6 en 1 Tarjeta Reader - Page 5 - Tarjeta Reader 6 en 1 1. CF/MD Reader/Writer 2. SM Reader /Writer 3. MS Tarjeta Reader/Writer 4. SD/MMC Reader/Writer 1. Compact Flash (CF) y IBM Micro Drive (MD) Tarjeta Reader/Writer soquete 2. Smart Media( SM) Tarjeta Reader/Writer Soquete 3. Memoria Stick (MS) Tarjeta Reader/Writer Soquete 4. Seguro Digital (SD) y Tarjeta Multi Media (MMC) Tarjeta Reader/Writer Soquete Instalación del Driver: Sustentado OS: Windows 98, Windows 98SE, Windows ME, Windows 2000, Windows XP (Windows ME y Windows XP ejecuta sin el driver) y Mac 8.6, 9.x; 10.1.2 (10.1.2 ejecuta sin el driver) ya son sustentados. - Page 6 - - Page 7 -
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Languages
Only pages of the document in English were displayed