Samsung BD-F5500, BD-F5100, BDF5100, BD-F 5100, BD F5100, BDF5500 User manual

BD-F5100
Blu-ray™ Disc Player
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service,
please register your product at
www.samsung.com/register
ENGLISH
02285B-BD-F5100-ZC-ENG.indd 1
2013-01-21 오후 6:39:17
Safety Information
CLASS 1 LASER product
Warning
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
The lighting flash and Arrowhead within the CAUTION: TO REDUCE THE RISK OF
The exclamation point within the triangle
triangle is a warning sign alerting you to
ELECTRIC SHOCK, DO NOT REMOVE THE is a warning sign alerting you to important
dangerous voltage inside the product.
COVER (OR BACK). NO USER SERVICEABLE instructions accompanying the product.
PARTS ARE INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
WARNING
• To reduce the risk of fire or electric shock,
do not expose this appliance to rain or
moisture.
FCC NOTE (for U.S.A)
This equipment has been tested and found
to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses and can radiate
radio frequency energy and, if not installed
and used in accordance with the instructions,
may cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on.
The user is encouraged to try to correct the
interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect this equipment into an outlet on
a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
TV technician for help.
This class B digital product meets all
requirements of the Canadian Interference Causing Equipment Regulations.
Note to CATV system installer
This reminder is provided to call the CATV
system installer's attention to Article 82040 of the National Electrical Code (Section
54 of Canadian Electrical Code, Part I) that
provides guidelines for proper grounding and,
in particular, specifies that the cable ground
shall be connected to the grounding system
of the building as close to the point of cable
entry as practical.
This Compact Disc player is classified as a
CLASS 1 LASER product. Use of controls,
adjustments or performance of procedures
other than those specified herein may result in
hazardous radiation exposure.
DANGER :
• VISIBLE AND INVISIBLE LASER
RADIATION WHEN OPEN. AVOID DIRECT
EXPOSURE TO BEAM. (FDA 21 CFR)
CAUTION :
• CLASS 3B VISIBLE AND INVISIBLE
LASER RADIATION WHEN OPEN. AVOID
EXPOSURE TO THE BEAM. (IEC 60825-1)
• THIS PRODUCT UTILIZES A LASER.
USE OF CONTROLS OR ADJUSTMENTS
OR PERFORMANCE OF PROCEDURES
OTHER THAN THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS RADIATION
EXPOSURE. DO NOT OPEN COVER AND
DO NOT REPAIR YOURSELF. REFER
SERVICING TO QUALIFIED PERSONNEL.
CLASS 1
KLASSE 1
LUOKAN 1
KLASS 1 PRODUCTO
✎✎ NOTES
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
`` If the Region number of a Blu-ray Disc/DVDs
does not correspond to the Region number of
this player, the player cannot play the disc.
Precautions
Important Safety Instructions
Read these operating instructions carefully
before using the unit. Follow all the safety
instructions listed below.
Keep these operating instructions handy for
future reference.
1.
Read these instructions.
3.
Heed all warnings.
2.
4.
5.
6.
7.
8.
9.
Keep these instructions.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any ventilation openings.
Install in accordance with the
manufacturer's instructions.
Do not install near any heat sources
such as radiators, heat registers,
stoves, or other apparatus (including AV
receivers) that produce heat.
Do not defeat the safety purpose of
the polarized or grounding-type plug.
A polarized plug has two blades with
one wider than the other. A grounding
type plug has two blades and a third
grounding prong. The wide blade or
the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being
walked on or pinched particularly at
plugs, convenience receptacles, and the
point where it exits the apparatus.
11. Only use attachments/accessories
specified by the manufacturer.
2
02285B-BD-F5100-ZC-ENG.indd 2
2013-01-21 오후 6:39:17
12. Use only with the cart,
stand, tripod, bracket,
or table specified by
the manufacturer,
or sold with the
apparatus. When
a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long periods
of time.
14. Refer all servicing to qualified service
personnel. Servicing is required when
the apparatus has been damaged in any
way, such as when the power-supply
cord or plug is damaged, liquid has
been spilled or objects have fallen into
the apparatus, the apparatus has been
exposed to rain or moisture, does not
operate normally, or has been dropped.
Disc Storage & Management
• Holding Discs
-- Fingerprints or scratches
on a disc may reduce
sound and picture quality
or cause skipping
-- Avoid touching the surface of a disc
where data has been recorded.
-- Hold the disc by the edges so that
fingerprints will not get on the surface.
-- Do not stick paper or tape on the disc.
• Cleaning Discs
-- If you get fingerprints or dirt
on a disc, clean it with a mild
detergent diluted in water
and wipe with a soft cloth.
-- When cleaning, wipe gently
from the inside to the outside of the disc.
02285B-BD-F5100-ZC-ENG.indd 3
• Disc Storage
`` Do not keep in direct sunlight.
`` Keep in a cool ventilated area.
`` Keep in a clean protection jacket and
store vertically.
Handling Cautions
• Do not expose this apparatus to dripping
or splashing. Do not put objects filled with
liquids, such as vases on the apparatus.
• To turn this apparatus off completely, you
must pull the power plug out of the wall
socket. Consequently, the power plug must
be easily and readily accessible at all times.
• Do not plug multiple electric devices into
the same wall socket. Overloading a socket
can cause it to overheat, resulting in a fire.
• Before connecting other components to
this player, be sure to turn them off.
• If you move your player suddenly from a cold
place to a warm place, condensation may
occur on the operating parts and lens and
cause abnormal disc playback. If this occurs,
unplug the player, wait for two hours, and
then connect the plug to the power outlet.
Then, insert the disc, and try to play back
again.
• If the product makes an abnormal noise
or produces a burning smell or smoke,
turn off the power switch immediately and
disconnect the power plug from the wall
outlet. Then, contact the nearest customer
service center for technical assistance. Do
not use the product. Using the product as
it is may cause a fire or an electric shock.
Copyright
© 2013 Samsung Electronics Co.,Ltd.
All rights reserved; No part or whole of this
user's manual may be reproduced or copied
without the prior written permission of
Samsung Electronics Co.,Ltd.
Contents
Safety Information
Language Settings...................................... 13
Precautions.................................................. 2
General Settings......................................... 13
Warning........................................................ 2
Disc Storage & Management........................ 3
Handling Cautions........................................ 3
Copyright..................................................... 3
Getting Started
Before using the User Manual....................... 4
Security Settings........................................ 13
Support Settings........................................ 13
Media Play
Playing a Commercially Recorded Disc....... 14
Playing Files on a USB Device.................... 14
Playing a Disc with User Recorded Content... 15
Logos of Discs the player can play............... 4
Playing Content Located in Your PC........... 15
Controlling Music Playback......................... 16
Accessories.................................................. 6
Rear Panel.................................................... 6
Remote Control............................................ 7
Connections
Connecting to a TV....................................... 7
Connecting to an Audio System................... 8
Controlling Video Playback......................... 16
Playing Photo Contents.............................. 17
Appendix
Troubleshooting.......................................... 18
Specifications............................................. 19
Connecting to a Network Router.................. 8
Settings
The Initial Settings Procedure....................... 9
Menu Navigation........................................... 9
Accessing the Settings Menu....................... 9
Display Settings............................................ 9
Audio Settings............................................ 10
Network Settings........................................ 11
System Settings......................................... 12
3
2013-01-21 오후 6:39:18
Getting Started
Region Code
Before using the User Manual
Disc Types and Contents your player can play
Media
VIDEO
MUSIC
PHOTO
✎✎ NOTES
Disc Type
Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
Details
BD-ROM or BD-RE/-R recorded in the BD-RE format.
DVD-VIDEO, recorded DVD+RW/DVD-RW(V)/DVD-R/+R that have
been recorded and finalized, or a USB storage media containing MKV
or MP4 contents.
Music recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing MP3 or WMA contents.
Photos recorded on CD-RW/-R, DVD-RW/-R, BD-RE/-R or a USB
storage media containing JPEG contents.
`` The player may not play certain CD-RW/-R and DVD-R because of the disc type or recording conditions.
`` If a DVD-RW/-R has not been recorded properly in DVD video format, it will not be playable.
Both players and discs are coded by region.
These regional codes must match for a disc
to play. If the codes do not match, the disc
will not play.
The Region Code for this player is displayed
on the rear panel of the player.
Disc Type
Region
Code
Blu-ray
Disc
a
DVDVIDEO
North America, Central
America, South America,
Korea, Japan, Taiwan, Hong
Kong and South East Asia.
1
The U.S., U.S. territories and
Canada
Area
Logos of Discs the player can play
Blu-ray Disc
BD-LIVE
`` Your player will not play content that has been recorded on a DVD-R at a bit-rate that exceeds 10 Mbps.
`` Your player will not play content that has been recorded on a BD-R or USB device at a bitrate that exceeds
25 Mbps.
`` Playback may not work for some types of discs, or when you use specific functions, such as angle change
and aspect ratio adjustment. Information about the discs is written in detail on the disc box. Please refer to
this if necessary.
`` When you play a BD-J title, loading may take longer than a normal title or some functions may perform slowly.
Disc types your player cannot play
• HD DVD
• DVD-ROM/PD/
MV, etc
• DVD-RAM
• Super Audio CD
(except CD layer)
4
02285B-BD-F5100-ZC-ENG.indd 4
• DVD-RW (VR mode) • 3.9 GB DVD-R for
Authoring.
• CVD/CD-ROM/
CDV/CD-G/CD-I/LD
(CD-Gs play audio
only, not graphics.)
NTSC broadcast system in U.S.A, Canada, Korea, Japan
Supported File Formats
Notes on the USB connection
• Your player supports USB storage media,
MP3 players, digital cameras, and USB
card readers.
• The player does not support folder or file
names longer than 128 characters.
• Some USB/External HDD/digital camera
devices may not be compatible with the player.
• Your player supports the FAT16, FAT32,
and NTFS file systems.
• Connect USB devices directly to the player’s
USB port. Connecting through a USB cable
may cause compatibility problems.
• Inserting more than one memory device
into a multi-card reader may cause the
reader to operate improperly.
• The player does not support the PTP protocol.
• Do not disconnect a USB device during a
"loading" process.
• The bigger the image resolution, the longer
the image takes to display.
• This player cannot play MP3 files with DRM
(Digital Rights Management) downloaded
from commercial sites.
• Your player only supports video with a
frame rate under 30fps (frames per second).
• Your player only supports USB Mass
Storage Class (MSC) devices such as
thumb drives and USB HDD. (HUB is not
supported.)
• Certain USB HDD Devices, multi-card
readers and thumb drives may not be
compatible with this player.
• If some USB devices require excessive
power, they may be limited by the circuit
safety device.
2013-01-21 오후 6:39:19
• If playback from a USB HDD is unstable, provide additional power by plugging the HDD into
a wall socket.
If the problem continues, contact the USB HDD manufacturer.
• You must remove the USB storage device safely by performing the "Safely Remove USB"
function to prevent possible damage to the USB memory.
Press the HOME button to move to the home screen, press the YELLOW (C) button, and
then press the v button.
• SAMSUNG is not responsible for any data file damage or data loss.
• Your player does not support NTFS compressed files, sparse files, or encrypted files.
• You can repair or format a USB device on your Desktop PC. (MS-Windows OS only)
Video File Support
File Extension
*.avi
*.mkv
Container
AVI
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
PS
Video Codec
MP4v3
H.264 BP/MP/HP
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
Audio Codec
MP3
Dolby Digital
DTS
WMA
PCM
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
Resolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
•• Video decoder
-- Supports up to H.264 Level 4.1 and AVCHD
-- Does not support H.264 FMO/ASO/RS and VC1 SP/MP/AP L4
-- MPEG4 SP, ASP :
Below 1280 x 720 : 60 frames max
Above 1280 x 720 : 30 frames max
-- Does not support GMC 2 or higher
•• Audio decoder
-- Supports WMA 7, 8, 9 and STD
-- Does not support WMA sampling rate of 22050Hz mono.
-- AAC: Max sampling rate: 96Khz (8, 11, 12, 16, 22,24, 32,44.1, 48, 64, 88.2, 96)
Max bitrate: 320kbps
Music File Support
File Extension
Audio Codec
Support Range
*.wma
WMA
WMA
* Sampling rates (in kHz) - 8, 11, 16, 22, 32, 44.1, 48
* Bit rates - All bit-rates from 5kbps to 355kbps
*.mp3
MP3
MP3
-
Type
Resolution
JPEG
15360x8640
PNG
15360x8640
•• Limitations
-- Even when a file is encoded by a supported codec listed above, the file might not be
played if its content has a problem.
-- Normal playback is not guaranteed if the file’s container information is wrong or the file
itself is corrupted.
-- Files having a higher Bit rate/frame rate than standard may stutter during sound/video playback.
-- The Seek (skip) function is not available if the file’s index table is damaged.
5
02285B-BD-F5100-ZC-ENG.indd 5
2013-01-21 오후 6:39:20
AVCHD (Advanced Video Codec High Definition)
• This player can play back AVCHD format discs. These discs are normally recorded and used
in camcorders.
• The AVCHD format is a high definition digital video camera format.
• The MPEG-4 AVC/H.264 format compresses images with greater efficiency than the
conventional image compressing format.
• Some AVCHD discs use the "x.v.Color" format. This player can play back AVCHD discs that
use "x.v.Color" format.
• "x.v.Color" is a trademark of Sony Corporation.
• "AVCHD" and the AVCHD logo are trademarks of Matsushita Electronic Industrial Co., Ltd.
and Sony Corporation.
PLAY/PAUSE BUTTON
STOP BUTTON
OPEN/CLOSE BUTTON
POWER BUTTON
✎✎ NOTES
`` Some AVCHD format discs may not play, depending on the recording condition.
AVCHD format discs need to be finalized.
`` "x.v.Color" offers a wider color range than normal DVD camcorder discs.
`` Some MKV and MP4 format discs may not play, depending on the video resolution and frame rate condition.
Accessories
✎✎ NOTES
Check for the supplied accessories shown below.
DISC TRAY
REMOTE CONTROL SENSOR
USB HOST
`` When the player displays the Blu-ray Disc menu, you cannot start the movie by pressing the Play button
on the player or the remote. To play the movie, you must select Play Movie or Start in the disc menu, and
then press the v button.
`` You can perform software upgrades using the USB Host jack with a USB flash memory stick only.
BONUS REPEAT REPEAT
VIEW
Batteries for Remote Control
(AAA Size)
User Manual
A-B
Rear Panel
FULL
SCREEN
Remote Control
HDMI OUT
LAN
DIGITAL AUDIO OUT
6
02285B-BD-F5100-ZC-ENG.indd 6
2013-01-21 오후 6:39:21
Remote Control
Tour of the Remote Control
Turn the player on and off.
Turn the TV on and off.
After setup, allows you to set the input
source on your TV.
TV volume adjustment.
Press to open and close the disc tray.
Connecting to a TV
Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product to
the HDMI IN jack on your TV.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
Press the number buttons to operate options.
Use to enter the popup menu/title menu.
Use to enter the disc menu.
Press to search a disc backwards or
forwards.
Press to pause a disc.
Press to skip backwards or forwards.
Press to stop a disc.
Use to access various audio functions on a
disc (Blu-ray Disc/DVD).
Press to switch the Blu-ray Disc/DVD’s
subtitle language.
Press to use the Tools menu.
Use to display the playback information
when playing a Blu-ray Disc/DVDs.
Use to select menu items and change menu
values.
Press to exit the menu.
Return to the previous menu.
These buttons are used both for menus on the
player and also several Blu-ray Disc functions.
Press to use bonusview function.
BONUS REPEAT REPEAT
VIEW
A-B
FULL
SCREEN
✎✎ NOTES
!!
02285B-BD-F5100-ZC-ENG.indd 7
Press to see the full screen on a TV.
During the Blu-ray Disc/DVDs playback, Full
Screen button does not operate.
Allows you to repeat a title, chapter, track or
disc.
Allows you to repeat A-B disc.
Installing batteries
Audio
Video
Press to move to the Home menu.
Press to play a disc.
`` If the remote does not operate properly:
• Check the polarity (+/–) of the batteries.
• Check if the batteries are drained.
• Check if the remote sensor is blocked by
obstacles.
• Check if there is any fluorescent lighting nearby.
CAUTION
`` Dispose of batteries according to local environmental
regulations. Do not put them in the household trash.
✎✎ NOTES
`` If you use an HDMI-to-DVI cable to connect to your display device, you must also connect the Digital Audio
Out on the player to an audio system to hear audio.
`` An HDMI cable outputs digital video and audio, so you don't need to connect an audio cable.
`` Depending on your TV, certain HDMI output resolutions may not work. Please refer to the user manual of
your TV.
`` When you connect the player to your TV using the HDMI cable or to a new TV, and then turn it on for the
first time, the player automatically sets the HDMI output resolution to the highest supported by the TV.
`` A long HDMI cable may cause screen noise. If this occurs, set HDMI Deep Color to Off in the menu.
`` To view video in the HDMI 720p, 1080i, or 1080p output mode, you must use a High speed (category 2)
HDMI cable.
`` HDMI outputs only a pure digital signal to the TV.
If your TV does not support HDCP (High-bandwidth Digital Content Protection), random noise appears on
the screen.
7
2013-01-21 오후 6:39:22
Connecting to an Audio System
Connecting to a Network Router
You can connect the Blu-ray player to an audio system using one of the methods illustrated
below.
-- Do not connect the power cord to the wall outlet until you have made all the other
connections.
-- When you change the connections, turn off all devices before you start.
You can connect your player to your network router using one of the methods illustrated below.
To use the DLNA network functionality, you must connect your PC to your network as shown
in the illustrations.
Wired Network
Method 1 Connecting to an HDMI supported AV receiver
• Connect an HDMI cable (not supplied) from the HDMI OUT jack on the back of the product
to the HDMI IN jack on your receiver.
• Best quality (Recommended)
Method 2 Connecting to an AV receiver with Dolby Digital or a DTS decoder
Or
• Using a digital Coaxial cable (not supplied), connect the Coaxial Digital Audio Out jack on the
product to the Digital Coaxial In jack of the receiver.
• Good quality
• You will hear sound only through the front two speakers with Digital Output set to PCM.
Broadband modem
(with integrated router)
Broadband
service
Router
Broadband
modem
Method 1
Audio
Method 2
Audio
Broadband
service
✎✎ NOTES
`` Internet access to Samsung's software update server may not be allowed, depending on the router you use or your
ISP's policy. For more information, contact your ISP (Internet Service Provider).
`` DSL users, please use a router to make a network connection.
8
02285B-BD-F5100-ZC-ENG.indd 8
2013-01-21 오후 6:39:23
Settings
The Initial Settings Procedure
`` If you leave the player in the stop mode for
more than 5 minutes without using it, a screen
saver will appear on your TV. If the player is
left in the screen saver mode for more than 25
minutes, the power will automatically turn off.
• The Home screen will not appear if you do not
configure the initial settings.
• The OSD (On Screen Display) may change in this
player after you upgrade the software version.
• The access steps may differ depending on the
menu you selected.
• After the initial settings process is complete, you can
then operate the panel buttons and remote control.
The Initial Settings Procedure appears when
you turn on player for the first time and lets you
set the OSD and menu languages, configure
the connection to your home network, and
choose the aspect ratio output (screen size
and format) that is correct for your TV. Follow
the directions that appear on the screen.
✎✎ NOTES
`` The Home menu will not appear if you do not
configure the initial settings except as noted below.
`` If you press the BLUE (D) button during
network setup, you can access the Home menu
even if the network setup is not completed yet.
`` When you return to the Home menu, the full
screen mode is cancelled automatically.
`` If you want to display the Initial Setting screen
again to make changes, press the @ button on
the front panel of the player for more than 5
seconds with no disc inserted. This resets the
player to its default settings.
`` After the initial settings process is complete, you
can operate the HDMI-CEC function.
`` If you want to use the Anynet+(HDMI-CEC)
function to aid in the initial set up process,
please follow the instructions below.
1) Connect the player to an Anynet+(HDMICEC) compliant Samsung TV using HDMI Cable.
2) Set the Anynet+(HDMI-CEC) feature to On in
both the TV and the player.
3) Set the TV to the Initial Settings Procedure.
02285B-BD-F5100-ZC-ENG.indd 9
Menu Navigation
1
Selects Music.
2
Selects Settings.
3
Displays the buttons you can use on the
remote to access functions.
4
Selects applications.
5
Selects Videos.
6
Selects Photos.
✎✎ NOTES
1
`` The Videos, Photos, and Music options require
that you have an appropriate disc inserted into
the player or a USB flash device attached to
the player.
3
2
HOME Button
: Press to move to the Home
VIEW
A-B
menu.
BONUS REPEAT REPEAT
1
2
3
4
Accessing the Settings Menu
4
FULL
SCREEN
RETURN Button : Return to the previous menu.
v (Enter) / DIRECTION Button :
Move the cursor or select an item.
Activate the currently selected item.
Confirm a setting.
• Home Menu
1
Videos
Photos
Music
Settings
2
5
4
App1
No Disc
a Change Device
App2
App3
d View Devices " Enter
1.
2.
EXIT Button : Press to exit the current menu.
6
To access the Settings menu and sub-menus,
follow these steps:
3.
4.
5.
Press the POWER button.
The Home Menu appears.
Press the ◄► buttons to select Settings,
and then press the v button.
Press the ▲▼ buttons to select the
desired submenu, and then press the
v button.
Press the ▲▼ buttons to select the desired
item, and then press the v button.
Press the EXIT button to exit the menu.
✎✎ NOTES
`` The access steps may differ depending on
the menu you selected. The OSD (On Screen
Display) may change in this player after you
upgrade the software version.
Display Settings
You can configure various display options
such as the TV Aspect Ratio, Resolution, etc.
TV Aspect Ratio
Depending on the type of television you have,
you may want to adjust the screen size setting.
✎✎ NOTES
`` Depending on the disc type, some aspect
ratios may not be available.
`` If you select an aspect ratio and option which is
different than the aspect ratio of your TV screen,
the picture might appear to be distorted.
BD Wise (Samsung TVs only)
BD Wise is Samsung’s latest inter-connectivity
feature.
When you connect a Samsung player and a
Samsung TV with BD Wise to each other via
HDMI, and BD Wise is on in both the player
and TV, the player outputs video at the video
resolution and frame rate of the Blu-ray Disc/
DVDs.
✎✎ NOTES
`` When BD Wise is on, the Resolution setting
automatically defaults to BD Wise and BD Wise
appears in the Resolution menu.
`` If the player is connected to a device that does not
support BD Wise, you cannot use the BD Wise function.
`` For proper operation of BD Wise, set the BD
Wise menu of both the player and the TV to On.
3
9
2013-01-21 오후 6:39:24
Resolution
Lets you set the output resolution of the HDMI
video signal to Auto, 1080p, 1080i, 720p or
480p. The number indicates the number of
lines of video per frame. The i and p indicate
interlaced and progressive scan, respectively.
The more lines, the higher the quality.
Resolution according to the output
mode
• Blu-ray Disc/E-contents/Digital Contents
playback
Setup
Output
BD Wise
Auto
1080p@60F
(Movie Frame : Off)
Movie Frame :
Auto (24Fs)
1080i
720p
480p
HDMI / connected
HDMI Mode
E-contents/
Blu-ray Disc
Digital
contents
Resolution of
1080p
Blu-ray Disc
Max. Resolution Max. Resolution
of TV input
of TV input
• DVD playback
Output
Setup
BD Wise
Auto
1080p
1080i
720p
480p
1080@60F
1080@60F
1080@24F
1080p@24F
1080i
720p
480p
1080i
720p
480p
HDMI / connected
HDMI Mode
480i
Max. Resolution of TV input
1080p
1080i
720p
480p
10
02285B-BD-F5100-ZC-ENG.indd 10
✎✎ NOTES
`` If the TV you connected to the player does not
support Movie Frame or the resolution you
selected, the message "If no pictures are shown
after selecting ‘Yes’, please wait for 15 seconds
to return to the previous resolution. Do you
want to change the resolution?" appears. If you
select Yes, the TV’s screen will go blank for 15
seconds, and then the resolution will revert to
the previous resolution automatically.
`` If the screen stays blank after you have
changed the resolution, remove all discs,
and then press and hold the @ button on the
front of the player for more than 5 seconds.
All settings are restored to the factory default.
Follow the steps on the previous page to
access each mode and select the Display Setup
that your TV will support.
`` When the factory default settings are restored,
all stored user BD data is deleted.
`` The Blu-ray Disc must have the 24 frame feature
for the player to use the Movie Frame (24Fs) mode.
Progressive Mode
Lets you improve picture quality when viewing DVDs.
Audio Settings
Digital Output
Lets you select the digital audio output format that is suitable for your TV or AV Receiver. For
more details, please refer to the Digital Output Selection table below.
Digital Output Selection
Setup
Connection
PCM
Movie Frame (24Fs)
Setting the Movie Frame (24Fs) feature to
Auto allows you to adjust the player’s HDMI
output to 24 frames per second for improved
picture quality.
You can enjoy the Movie Frame (24Fs) feature
only on a TV supporting this frame rate.
You can select Movie Frame only when the
player is in the HDMI 1080i or 1080p output
resolution modes.
Audio Stream
on Blu-ray
Disc
HDMI Color Format
Audio Stream
on DVD
HDMI Deep Color
Definition for
Blu-ray Disc
Lets you set the color space format for
HDMI output to match the capabilities of the
connected device (TV, monitor, etc).
Lets you output video from the HDMI OUT jack with
Deep Color. Deep Color provides more accurate
color reproduction with greater color depth.
HDMI
Receiver
Coaxial
Up to 7.1ch PCM 2ch
Dolby Digital
PCM 2ch
PCM 2ch
Dolby Digital Plus
PCM 2ch
PCM 2ch
Dolby TrueHD
PCM 2ch
PCM 2ch
DTS
PCM 2ch
PCM 2ch
DTS-HD High
Resolution Audio
PCM 2ch
PCM 2ch
DTS-HD Master
Audio
PCM
Dolby Digital
DTS
Any
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Bitstream
(Re-encoded
Dolby D)
HDMI supported
HDMI
HDMI Receiver or
Coaxial
AV receiver or
Receiver
Coaxial
Coaxial
Re-encoded
PCM
PCM 2ch
Re-encoded DTS
Dolby Digital *
Re-encoded
Dolby Digital Dolby Digital Re-encoded DTS
Dolby Digital *
Dolby Digital
Re-encoded
Dolby Digital Re-encoded DTS
Plus
Dolby Digital *
Re-encoded
Dolby TrueHD Dolby Digital Re-encoded DTS
Dolby Digital *
Re-encoded
DTS
DTS
Re-encoded DTS
Dolby Digital *
DTS-HD High
Re-encoded
Resolution
DTS
Re-encoded DTS
Dolby Digital *
Audio
DTS-HD
Re-encoded
DTS
Re-encoded DTS
Master Audio
Dolby Digital *
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Dolby Digital Dolby Digital
Dolby Digital
Dolby Digital
DTS
DTS
DTS
DTS
Decodes main
Decodes main feature
feature audio and
Outputs only main feature audio and BONUSVIEW
BONUSVIEW audio
audio stream so that your audio stream together
stream together into
into PCM audio
AV receiver can decode the
PCM audio and add
and add Navigation
audio bitstream.
Navigation Sound
You will not hear BONUSVIEW Sound Effects, then
Effects, then rere-encodes the
audio and Navigation Sound
encodes the PCM
PCM audio into DTS
Effects.
audio into Dolby
bitstream
Digital bitstream
Bitstream
(Unprocessed)
PCM
PCM 2ch
PCM 2ch
PCM 2ch
PCM 2ch
Decodes main feature
audio and BONUSVIEW
audio stream together
into PCM audio and add
Navigation Sound Effects.
Bitstream
(Re-encoded
DTS)
2013-01-21 오후 6:39:24
** If Source Stream is 2ch, "Re-encoded
Dolby D" Settings are not applied.
Blu-ray Discs may include three audio streams :
-- Main Feature Audio : The audio soundtrack
of the main feature.
-- BONUSVIEW audio : An additional
soundtrack such as the director or actor’s
commentary.
-- Navigation Sound Effects : When you
choose a menu navigation selection, a
Navigation Sound Effect may sound.
Navigation Sound Effects are different on
each Blu-ray Disc.
✎✎ NOTES
`` Be sure to select the correct Digital Output or
you will hear no sound or just loud noise.
`` If the HDMI device (AV receiver, TV) is not
compatible with compressed formats (Dolby
Digital, DTS), the audio signal outputs as PCM.
`` Regular DVDs do not have BONUSVIEW audio
and Navigation Sound Effects.
`` Some Blu-ray Discs do not have BONUSVIEW
audio and Navigation Sound Effects.
`` If you play MPEG audio soundtracks, the audio
signal outputs as PCM regardless of your
Digital Output selections (PCM or Bitstream).
`` If your TV is not compatible with compressed
multi-channel formats (Dolby Digital, DTS), the
player may output PCM 2ch downmixed audio
even though you selected Bitstream (either Reencoded or Unprocessed) in the setup menu.
`` If your TV is not compatible with PCM sampling
rates over 48kHz, the player may output 48kHz
downsampled PCM audio even though you set
PCM Downsampling to Off.
PCM Downsampling
Lets you choose to have 96KHz PCM signals
downsampled to 48KHz before they are
outputted to an amplifier. Choose only if your
amplifier or receiver is not compatible with a
96KHz signal.
Dynamic Range Control
Lets you apply dynamic range control to
Dolby Digital, Dolby Digital Plus, and Dolby
True HD audio.
• Auto : Automatically controls the dynamic
range of Dolby TrueHD audio, based
on information in the Dolby TrueHD
soundtrack.
Also turns dynamic range control on for
Dolby Digital and Dolby Digital Plus.
• Off : Leaves the dynamic range uncompressed,
letting you hear the original sound.
• On : Turns dynamic range control on for
all three Dolby formats. Quieter sounds
are made louder and the volume of loud
sounds is reduced.
Downmixing Mode
Lets you select the multi-channel downmix
method that is compatible with your stereo
system. You can choose to have the player
downmix to normal stereo or to surround
compatible stereo.
Network Settings
Please contact your ISP to find out if your IP
address is static or dynamic. If it is dynamic
- and most are - we recommend using the
Auto procedure for network setup. This is
easiest and will work in the majority of cases.
If it is static, you must use the manual set up
procedure.
Network setup directions start below.
✎✎ NOTES
`` This unit can only be connected to a Network
via a wired connection.
Wired Network Settings
1.
2.
3.
In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
Network, and then press the v
button.
Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Settings
Wired Network Settings
Display
Audio Internet Protocol Setup
Network
System
Language
0
0
0
Subnet Mask
DNS
Security
General
Support
: Auto
0
0
0
Gateway:
IP Address
DNS Server
: 0
: 0
:Auto
: 0
0
0
0
0
0
\
0
0
> Move " Select ' Return
4.
5.
In the Internet Protocol Setup field,
select Auto if it is not selected. (Press
v to select Auto, and then press v.)
The Auto Function acquires and fills
in the values for IP Address, Subnet
Mask, etc., automatically.
✎✎ NOTES
6.
7.
8.
9.
`` This process can take up to five minutes.
After the Network Function has acquired
the network values, press the RETURN
button.
Select Network Test, and then press
v to ensure the player has connected
to your network.
When the Network Test is complete,
press the RETURN twice to return to
the Main Menu.
If the Network Function does not acquire
the network values, go to the directions
for Manual Setup.
Manual Network Setup
Before you start manual network setup, you
need the network setting values.
To get the network setting values, contact
your ISP (Internet Service Provider) or your
network administrator.
To enter the Network Settings into your
player, follow these steps:
1.
2.
In the Home menu, press the ◄►
buttons to select Settings, and then
press the v button.
Press the ▲▼ buttons to select
Network, and then press the v
button.
11
02285B-BD-F5100-ZC-ENG.indd 11
2013-01-21 오후 6:39:25
3.
4.
5.
6.
7.
8.
9.
Press the ▲▼ buttons to select Wired
Network Settings, and then press the
v button. The Wired Network Settings
screen appears.
Select the Internet Protocol Setup field,
and then press the v button.
Press the ▲▼ buttons to select Manual,
and then press the v button.
Press the ▼ button to go to the first
entry field (IP Address).
Use the number buttons on your remote
to enter numbers.
When done with each field, use the ►
button to move to the next field. You
can also use the other arrow buttons to
move up, down, and back.
BD-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• Prohibit : No Internet connection is allowed
for any BD-LIVE content.
✎✎ NOTES
`` What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
Enter the IP Address, Subnet Mask,
and Gateway values in the same way.
10. Press the ▼ button to go to DNS.
11. Press the ▼ button to go to the first
DNS entry field.
12. Enter the numbers as above.
13. Press the RETURN button on your
remote control.
14. Run a Network Test to ensure the player
has connected to your network.
`` The Internet connection may be restricted
while you are using BD-LIVE contents.
Using BD-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
1.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
2.
3.
Attach a USB memory stick to the
USB jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BDLIVE services.
Insert a Blu-ray Disc that supports BDLIVE.
Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
✎✎ NOTES
`` The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
The DLNA Function
DLNA lets you play music, video, and photo
files located in your PC or NAS on the player.
To use DLNA with your player, you must
connect the player to your network.
(See pages 11~12).
To use DLNA with your PC, you must install
DLNA software on your PC.
If you have NAS, you can use DLNA without
any additional software.
To download DLNA software
1.
Go to Samsung.com
3.
On the next screen, click Get downloads
under Downloads.
2.
4.
5.
Click Support, enter your player’s
product number in the field that
appears, and then click Product.
Click Software on the next page.
Click the icon in the DLNA line under File
to start the download.
For instructions explaining how to play content
located on your PC, see pages 15~16.
System Settings
Initial Settings
By using the Initial Settings function, you can
set the language, Network Settings, etc.
For more information about the Initial Settings
function, refer to the Initial Settings section of
this user manual (page 9).
Quick Start
You can turn on the power quickly by
decreasing the boot time.
✎✎ NOTES
`` If this function is set to On, Standby power
consumption will be increased.
Anynet+ (HDMI-CEC)
Anynet+ is a convenient function that offers
linked operations with other Samsung players
that have the Anynet+ feature.
To operate this function, connect this player to
an Anynet+ Samsung TV with an HDMI cable.
With Anynet+ on, you can operate this player
using a Samsung TV remote control and start
disc playback simply by pressing the PLAY
(
) button on the TV’s remote control.
For more information, please see the TV user
manual.
✎✎ NOTES
`` This function is not available if the HDMI cable
does not support CEC.
`` If your Samsung TV has an Anynet+ logo, then
it supports the Anynet+ function.
`` Depending on your TV, certain HDMI output
resolutions may not work.
Please refer to the user manual of your TV.
12
02285B-BD-F5100-ZC-ENG.indd 12
2013-01-21 오후 6:39:25
`` If you have Anynet+ turned on, when you
turn off the product, disconnect, and then
reconnect the power cable, the product turns
on automatically to re-establish the Anynet+
connection. After about 15 seconds, it turns off
again automatically.
`` Some Samsung TVs, when connected to this
product using the Anynet+ function will, when
you turn them on, display a warning popup
message saying no connection has been
found. Never-the-less, the Anynet+ connection
is properly established and available to use.
BD Data Management
Enables you to manage the downloaded
contents you accessed through a Blu-ray disc
that supports the BD-LIVE service and stored
on a flash drive.
You can check the device’s information
including the storage size, delete the BD data,
or change the Flash memory device.
✎✎ NOTES
`` In the external memory mode, disc playback
may be stopped if you disconnect the USB
device in the middle of playback.
`` Your player supports the FAT16, FAT32, and
NTFS file systems. We recommend you use
USB devices that support USB 2.0 protocol
with 4 MB/sec or faster read/write speed.
`` The Resume Play function may not work after
you format the storage device.
`` The total memory available to BD Data
Management may differ, depending on the
conditions.
Language Settings
You can select the language you prefer for the
Home menu, disc menu, audio, and subtitles.
✎✎ NOTES
`` The selected language will only appear if it is
supported on the disc.
Change PIN
Change the 4-digit password used to access
security functions.
To change the PIN, follow these steps:
1.
Security Settings
2.
When you access this function for the first
time, the PIN screen appears. Enter the
default PIN - 0000 - using the number
buttons. To change the PIN, use the Change
PIN function (page 13). Each time you access
the Security Settings hereafter, you must
enter that four digit PIN. If you don’t change
the PIN, continue using the default PIN.
3.
BD Parental Rating
Prevents playback of Blu-ray Discs with
specific age ratings unless the 4 digit PIN is
entered.
DVD Parental Rating
This function works in conjunction with DVDs
that have been assigned an age rating or
numeric rating that indicates the maturity level
of the content. These numbers help you control
the types of DVDs that your family can watch.
Select the rating level you want to set. For example, if you select Level 6, discs rated
above 6 - Level 7 and 8 - will not play.
A larger number indicates more mature content.
When the DVD Parental Rating function is on,
you must enter the 4 digit PIN to play discs
with restricted rating levels.
4.
5.
Select Change PIN, and then press the
v button. The Enter old PIN screen
appears.
Enter the old PIN. If you never changed
the PIN, enter the default PIN: 0000. The Enter new PIN screen appears.
Enter the new PIN in the Enter new PIN
fields.
Re-enter the new PIN in the Confirm
new PIN fields. The "PIN is changed
successfully." message appears.
2.
Software Upgrade
The Software Upgrade menu allows you to
upgrade the player’s software for performance
improvements or additional services.
By Online
To upgrade By Online, follow these steps:
1.
2.
Press the v button.
3.
Remove any discs.
4.
If you forget your password
1.
Support Settings
Press and hold the @ button on the
front panel for 5 seconds or more.
All settings will revert to the factory settings.
✎✎ NOTES
`` When the factory default settings are restored,
all the user stored BD data will be deleted.
General Settings
Time Zone
Lets you specify the time zone that is
applicable to your area.
5.
Select By Online, and then press the
v button. The Connecting to Server
message appears.
A popup message will appear if an
update is available.
If you select Yes, the player will turn off
automatically before restarting.
(Never turn the player on or off manually
during an upgrade.)
The update progress popup will appear.
When the update is completed, the
player will turn off automatically.
Press the POWER button to turn on the
player.
✎✎ NOTES
`` The Update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or back on manually
during the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during a software upgrade.
13
02285B-BD-F5100-ZC-ENG.indd 13
2013-01-21 오후 6:39:25
By USB
To upgrade by USB, follow these steps:
1.
Visit www.samsung.com/bluraysupport.
3.
Unzip the zip archive to your computer.
You should have a single RUF file with
the same name as the zip file.
2.
Download the latest USB software
upgrade zip archive to your computer.
4.
Copy the RUF file to a USB flash drive.
5.
Make sure there is no disc in the player,
and then insert the USB flash drive into
the USB port of the player.
6.
In the player’s menu, go to Settings >
Support > Software Upgrade.
7.
Select By USB.
Auto Upgrade Notification
If you have connected the player to your
network, and then set Auto Upgrade
Notification on, the player automatically
notifies you when a new software version is
available for the player.
To set Auto Upgrade Notification on, follow
these steps:
1.
Select Auto Upgrade Notification, and
then press the v button.
2. Use the ▲▼ buttons to select On, and
then press the v button.
If there is a new software version available,
the player notifies you with a popup message.
1.
✎✎ NOTES
`` No disc should be in the product when you
upgrade the software using the USB Host jack.
`` When the software upgrade is done, check the
software details in the software Upgrade menu.
`` Do not turn off the player during the software
upgrade. It may cause the player to malfunction.
`` Software upgrades using the USB Host jack
must be performed with a USB flash memory
stick only.
2.
3.
4.
To upgrade the firmware, select Yes
in the Pop-up. The player turns off
automatically, then restarts, and begins
the download. (Never turn the player on
or off manually during an upgrade.)
The update progress popup appears.
When the update is complete, the player
turns off again automatically.
Press the POWER button to turn on the
player.
✎✎ NOTES
`` The update is complete when the player turns
off after restarting. Press the POWER button to
turn on the updated player for your use.
`` Never turn the player off or on manually during
the update process.
`` Samsung Electronics takes no legal
responsibility for player malfunction caused by
an unstable Internet connection or consumer
negligence during software upgrade.
Contact Samsung
Provides contact information for assistance
with your player.
Terms of Service Agreement
Lets you view the general disclaimer regarding
third party contents and services.
Reset
Returns all settings to their factory defaults
except for the network settings.
Media Play
Playing a Commercially Recorded
Disc
1.
2.
3.
Press the 8 button to open the disc
tray.
Place a disc gently into the disc tray
with the disc's label facing up.
Press the 8 button to close the disc
tray. Playback starts automatically.
Playing Files on a USB Device
You can play multimedia files located on a
USB storage device.
1.
Move to the Home menu.
3.
Press the ◄► button to select Yes, and
then press the v button.
2.
4.
5.
In Stop mode, connect the USB storage
device to the USB port on the front
panel of the player.
The message "Do you want to access
the device?" is displayed.
If you have a disc in the Blu-ray player,
press the RED (A) or BLUE (D) button.
If you do not, go to Step 6.
If you pressed the RED (A) button, go to
Step 5.
If you pressed the BLUE (D) button, go
to Step 5-1.
Press the ▲▼ buttons to select USB,
and then press the v button.
14
02285B-BD-F5100-ZC-ENG.indd 14
2013-01-21 오후 6:39:25
Videos
Photos
Music
Settings
No Disc
123
a
123
6.
1
a Change Device
App2
App3
c Safely Remove USB d View Devices " Enter
Press the ◄► buttons to select Videos,
Music, or Photos, and then press the
v button. Go to Step 7.
5-1. Press the ◄► buttons to select USB,
then press the v button.
123
a
App1
123
Settings
App2
App3
d Home " Enter
6 . Press the ▲▼ buttons to select Videos,
Music or Photos, and then press the
v button.
-1
7.
8.
9.
A screen appears listing the contents
of the device. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
✎✎ NOTES
`` Even though the player will display folders for
all content types, it will only display files of the
Content Type you selected in Step 6 or Step
6-1.
For example, if you selected music, you will
only be able to see music files. You can change
this selection by returning to the Home screen
and following the directions from Step 4.
10. Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
11. The controls and tools you use to
control and play videos, music, and
pictures located on a USB device are
identical to those you use to play videos,
music, and pictures on a disc.
Go to pages 15~17 for instructions.
✎✎ NOTES
`` You must remove the USB storage device
safely by performing the "Safely Remove USB"
function in order to prevent possible damage
to the USB memory. Press the MENU button to
move to the Home menu, select the YELLOW
(C) button, and then press the v button.
`` If you insert a disc when playing a USB storage
device, the device mode changes to Blu-ray,
DVD or CD automatically.
Playing a Disc with User Recorded
Content
You can play multimedia files you have
recorded on Blu-ray, DVD, or CD discs.
1.
2.
Place a user recorded disc into the
disc tray with the disc’s label facing
up, and then close the tray. The Device
Connected pop-up appears.
4.
5.
6.
7.
To play content located in your PC on your
Blu-ray disc player, you must connect the
Blu-ray player to you network. (See pages
11~12.) and install DLNA Software on your
PC.
To Play Content From Your PC
Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
1.
Go to the Home Menu.
3.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 2. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 2.
4.
In the Device screen that appears, select
your PC, and then press the v button.
✎✎ NOTES
3.
Playing Content Located in Your PC
2.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
Go to pages 15~17 for instructions
that explain how to control playback of
videos, music, and pictures on a disc.
Use the ◄► buttons to select the type
of content you want to view or play Videos, Photos, or Music - and then
press the v button.
✎✎ NOTES
A screen appears listing the contents
of the disc. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
Press the BLUE (D) button on your
remote (Device).
5.
6.
7.
`` Even though the player will display folders for
all content types, it will only display files of
the Content Type you selected in Step 4. For
example, if you selected music, you will only
be able to see music files. You can change this
selection by returning to the Home screen and
repeating Step 4.
A screen appears listing the contents
on your PC. Depending on how the
contents are arranged, you will see
either folders, individual files, or both.
If necessary, use the ▲▼◄►buttons to
select a folder, and then press the v
button.
Use the ◄►▲▼ buttons to select a file
to view or play, and then press the v
button.
15
02285B-BD-F5100-ZC-ENG.indd 15
2013-01-21 오후 6:39:26
8.
Press the RETURN button one or more
times to exit a current screen, exit a
folder, or to return to the Home screen.
Press the EXIT button to return directly
to the Home Screen.
9.
Go to pages 15~17 for instructions
that explain how to control playback of
videos, music, and pictures on a PC.
6 button
Starts playback.
7 button
Pauses playback.
5 button
Fast Motion
Play
During playback, press the 3 or
4 button.
Each time you press the 3 or
4 button, the playback speed
will change.
Slow Motion
Play
In pause mode, press the 4
button.
Each time you press the 4
button, the playback speed will
change.
Step Motion
Play
In pause mode, press the 7
button.
Each time you press the 7
button, a new frame appears.
Skip Motion
Play
During playback, press the 1 or
2 button.
Each time you press the 1 or
2 button, the disc moves to the
previous or next chapter or file.
Controlling Video Playback
You can control the playback of video content
located on a Blu-ray disc, DVD, CD, USB
device, or you computer. Depending on the
media, some of the functions described in this
manual may not be available.
During Blu-ray or DVD disc playback, the Full
screen button does not operate.
Buttons on the Remote Control
used for Video Playback
2
Stops playback.
wwUsing the disc menu, title menu,
1
popup menu, and title list
qqPlayback related buttons
The player does not play sound in Search,
Slow or Step mode.
• To return to normal speed playback, press
the 6 button.
BONUS REPEAT REPEAT
VIEW
A-B
FULL
SCREEN
DISC MENU
button
TITLE MENU
button
POPUP MENU
button
During playback, press this button
to start the disc menu function.
During playback, press this button
to start the title menu function.
During playback, press this button
to start the popup menu function.
Controlling Music Playback
You can control the playback of music located
on a Blu-ray disc, DVD, CD, USB device, or
your computer.
Repeat an Audio CD (CD-DA)/
MP3
1.
During Playlist playback, press the
TOOLS button.
Buttons on the Remote Control
used for Music Playback
TRACK 001
1
3
4
2.
5
6
3.
NUMBER buttons (Audio CD (CD-DA) only) :
During Playlist playback, press the desired
track number.
The selected track is played.
2
Skip : During playback, press the 1 or 2
button to move to the previous or next file of
VIEW
A-B
the playlist.
3
5 button : Stops a track.
4
5
6
00:08 / 05:57
04:07
TRACK 004
03:41
TRACK 005
03:17
TRACK 006
2
BONUS REPEAT REPEAT
FULL
SCREEN
1/6
\05:57
TRACK 002
Information
< Adjust > Move ' Return04:27
TRACK 003
+
1
Playlist
Tools
TRACK 001
Repeat Mode
? Off
CD
" Pause
Tools
03:35
' Return
Press the ◄► buttons to select Track,
All, Shuffle, or Off.
Press the v button.
Songs are played in the order
in which they were recorded.
Off
(
) Track
The current song is repeated.
)Shuffle
Shuffle plays songs in random
order.
(
(
) All
All songs are repeated.
Fast Play (Audio CD (CD-DA) only)
During playback, press the 3 or 4
button.
Each time you press the 3 or 4 button,
the playback speed will change.
Pause : Pauses a track.
6 button : Plays the currently selected
track.
16
02285B-BD-F5100-ZC-ENG.indd 16
2013-01-21 오후 6:39:27
✎✎ NOTES
Playlist
1.
To move to the Music List, press the 5
or RETURN button.
The Music List screen appears.
1/2 Page
Music TRACK 001
TRACK 001
TRACK 001
02:38
02:38
TRACK 001
TRACK 001
02:38
02:38
TRACK 001
TRACK 001
02:38
02:38
TRACK 001
TRACK 001
02:38
02:38
2.
3.
4.
5.
6.
Playing Photo Contents
02:38
TRACK 001
CD
`` If you remove all the tracks from a play list and
then press the v button, the player lists and
plays all the tracks on the disc.
TRACK 001
02:38
`` You can create a playlist with up to 99 tracks
on Audio CDs (CD-DA).
c Select
( ) Jump Page
' Return
Press the ▲▼◄► buttons to move
to a desired track, and then press the
YELLOW (C) button. A check appears
on the track.
Repeat this procedure to select
additional tracks.
To remove a track from the list, move to
the track, and then press the YELLOW
(C) button again.
The check on the track is cancelled.
When done, press the v button.
The tracks you selected are displayed
on the right side of the screen. The
player plays the first track.
To change the play list, press the
RETURN button to return to the Music
List. Repeat Steps 2, 3, and 4.
You can control the playback of photo content
located on a Blu-ray disc, DVD, CD, USB
device, or your computer.
✎✎ NOTES
`` Depending on the disc or storage device, the
Tools menu may differ.
`` To enable the background music function, the
photo file must be in the same storage media
as the music file.
However, the sound quality can be affected
by the bit rate of the MP3 file, the size of the
photo, and the encoding method.
`` You can't enlarge the subtitle and PG graphic
in the full screen mode.
Using the Tools Menu
During playback, press the TOOLS button.
Start Slide Show/ Select to start or stop the slide
Stop Slide Show show.
Slide Show Speed Select to set a slide show's speed.
Background
Music
Select to listen to music while
viewing a slide show.
Zoom
Select to enlarge the current
picture. (Enlarge up to 4 times)
Rotate
Select to rotate the picture. (This
will rotate the picture either
clockwise or counter clockwise.)
Information
Shows the picture information.
To cancel the play list and return to the
Home screen, press the RETURN or
EXIT button.
17
02285B-BD-F5100-ZC-ENG.indd 17
2013-01-21 오후 6:39:28
Appendix
PROBLEM
Troubleshooting
Forgot password
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings including the password will revert to the factory settings.
Don’t use this unless absolutely necessary.
• When the factory default settings are restored, all stored user BD data is
deleted.
The picture is noisy or
distorted
• Make sure that the disc is not dirty or scratched.
• Clean the disc.
No HDMI output.
• Check the connection between the TV and the HDMI jack of the player.
• Check if your TV supports 480p, 720p, 1080i, or 1080p HDMI input
resolutions.
Abnormal HDMI output
screen.
• If random noise appears on the screen, it means that TV does not support
HDCP (High-bandwidth Digital Content Protection).
If you experience other
problems.
• Go to the contents and find the section of the user manual that contains the
explanations regarding the current problem, and follow the procedure once
again.
• If the problem still cannot be solved, please contact your nearest Samsung
authorized service center.
Before requesting service, please try the following solutions.
PROBLEM
SOLUTION
No operation can be
performed with the remote
control.
• Check the batteries in the remote control. They may need replacing.
• Operate the remote control at a distance of no more than 20 feet from the
player.
• Remove batteries and hold down one or more buttons for several minutes
to drain the microprocessor inside the remote control to reset it. Reinstall
batteries and try to operate the remote control again.
Disc does not play.
• Ensure that the disc is installed with the label side facing up.
• Check the region number of the Blu-ray Disc/DVD.
• Ensure that the disc has disc menus.
The prohibition message
appears on the screen.
• This message appears when an invalid button is pressed.
• The Blu-ray Disc/DVD’s software doesn’t support the feature (e.g., angles).
• You’ve requested a title or chapter number or search time that is out of range.
Play mode differs from the
Setup Menu selection.
• Some of the functions selected in the Setup Menu may not work properly if
the disc is not encoded with the corresponding function.
The screen ratio cannot be
changed.
• The Screen Ratio is fixed on your Blu-ray Disc/DVD.
• This is not a problem with the player.
No audio.
• Make sure you have selected the correct Digital Output in the Audio Options
Menu.
The screen is blank.
• If the HDMI output is set to a resolution your TV cannot support (for example,
1080p), you may not see a picture on your TV.
• Press the @ button (on front panel) for more than 5 seconds with no disc
inside. All settings will revert to the factory settings.
• When the factory default settings are restored, all stored user BD data is
deleted.
SOLUTION
DLNA function
I can see folders shared
through DLNA, but I cannot
see the files.
• DLNAs shows only files corresponding to the Image, Music, and Movie
categories. Files that do not correspond to these categories are not displayed.
Video is played intermittently.
• Check if the network is stable.
• Check if the network cable is properly connected and if the network is
overloaded.
DLNA connection between
Player and PC is unstable.
• The IP address under the same subnetwork should be unique. If they are not,
IP interference can cause this phenomenon.
• Check if you have a firewall enabled.
If so, disable the firewall function.
18
02285B-BD-F5100-ZC-ENG.indd 18
2013-01-21 오후 6:39:28
PROBLEM
SOLUTION
I cannot connect to the BDLIVE server.
• Check whether the network connection is working or not by using the
Network Status menu.
• Check whether the USB memory device is connected to the player.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
• Check whether the BD-LIVE Internet Connection menu is set to Allow(All).
• If all above fails, contact the contents provider or update the player to the
latest firmware.
BD-LIVE
When using the BD-LIVE
service, an error occurs.
• The memory device must have at least 1GB of free space to accommodate
the BD-LIVE service.
You can check the available size in BD Data Management.
✎✎ NOTES
`` When the factory default settings are restored, all stored user BD data is deleted.
Repairs
Specifications
General
Weight
2.2 Ibs
Operating Temperature Range
+41°F to +95°F
Dimensions
Operating Humidity Range
USB
HDMI
Audio Output
Network
-----
Type A
10.6 (W) X 7.6 (D) X 1.6 (H) inches
10 % to 75 %
USB 2.0
DC output
5V 500mA Max.
Audio
PCM, Bitstream
Video
Digital Audio Output
Ethernet
1080p, 1080i, 720p, 480p
Coaxial
100BASE - TX Terminal
Network speeds equal to or below 10Mbps are not supported.
Design and specifications are subject to change without prior notice.
For the power supply and power consumption, refer to the label attached to the player.
Weight and dimensions are approximate.
If you contact us to repair your player, an administration fee may be charged if either:
1.
2.
An engineer is called out to your home at your request and there is no defect in the
product.
You bring the unit to a repair center and there is no defect in the product.
We will provide you with the amount of the administration fee before we make a home visit or
begin any work on your player.
We recommend you read this manually thoroughly, search for a solution on line at www.
samsung.com, or contact Samsung Customer Care before seeking to repair your player.
19
02285B-BD-F5100-ZC-ENG.indd 19
2013-01-21 오후 6:39:28
Compliance and Compatibility Notice
NOT ALL discs are compatible
• Subject to the restrictions described below and those noted throughout this Manual,
including the Disc Type and Characteristics section of this user manual, disc types that can
be played are: pre-recorded commercial BD-ROM, DVD-VIDEO, and Audio CD (CD-DA)
discs; BD-RE/-R, DVD-RW/-R discs; and CD-RW/-R discs.
• Discs other than those listed above cannot be and are not intended to be played by this
player. Some of the discs listed above may not play due to one or more reasons provided
below.
• Samsung cannot assure that this player will play every disc bearing the BD-ROM, BD-RE/-R,
DVD-VIDEO, DVD-RW/-R, DVD+RW/+R and CD-RW/-R logos, and this player may not
respond to all operating commands or operate all features of every disc. These and other
disc compatibility and player operation issues with new and existing format discs are
possible because:
-- Blu-ray is a new and evolving format and this player may not operate all features of Bluray Discs because some features may be optional, additional features may have been
added to the Blu-ray Disc format after the production of this player, and certain available
features may be subject to delayed availability;
-- not all new and existing disc format versions are supported by this player;
-- new and existing disc formats may be revised, changed, updated, improved and/or
supplemented;
-- some discs are produced in a manner that allows specific or limited operation or restricts
features during playback;
-- some discs bearing the BD-ROM, BD-RE/-R, DVD-VIDEO, DVD-RW/-R, DVD+RW/+R
and CD-RW/-R logos may still be non-standardized discs;
-- some discs may not be played depending on their physical state or recording conditions;
-- problems and errors can occur during the creation of Blu-ray Disc or DVD software and/or
the manufacture of discs;
-- this player operates differently than a standard DVD player or other AV equipment; and/or
-- for reasons noted throughout this user manual and for other reason(s) discovered and
posted by SAMSUNG customer care center.
• If you encounter disc compatibility or player operation problems, please contact SAMSUNG
customer care center.
You may also contact SAMSUNG customer care center for possible updates on this player.
• For additional information on playback restrictions and disc compatibility, refer to the
Precautions, Before Reading the user manual, Disc Types and Characteristics, and Before
Playing sections of this user manual.
• For Blu-ray Disc Player progressive scan output : CONSUMERS SHOULD NOTE THAT
NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS
product AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF
PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER
SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’ OUTPUT. IF THERE ARE
QUESTIONS REGARDING OUR TV SET COMPATIBILITY WITH THIS product, PLEASE
CONTACT OUR CUSTOMER SERVICE CENTER.
Copy Protection
• Because AACS (Advanced Access Content System) is approved as the content protection
system for the Blu-ray Disc format, similar to use of CSS (Content Scramble System) for
the DVD format, certain restrictions are imposed on playback, analog signal output, etc., of
AACS protected contents.
The operation of this product and restrictions on this product may vary depending on your
time of purchase as those restrictions may be adopted and/or changed by AACS after the
production of this product. Furthermore, BD-ROM Mark and BD+ are additionally used as
content protection systems for the Blu-ray Disc format, which imposes certain restrictions
including playback restrictions for BD-ROM Mark and/or BD+ protected contents. To obtain
additional information on AACS, BD-ROM Mark, BD+, or this product, please contact
SAMSUNG customer care center.
• Many Blu-ray Disc/DVDs are encoded with copy protection. Because of this, you should
only connect your Player directly to your TV, not to a VCR. Connecting to a VCR results in a
distorted picture from copy-protected Blu-ray Disc/DVDs.
• Under the U.S. Copyright laws and Copyright laws of other countries, unauthorized
recording, use, display, distribution, or revision of television programs, videotapes, Blu-ray
Discs, DVDs, and other materials may subject you to civil and/or criminal liability.
• Cinavia Notice : This product uses Cinavia technology to limit the use of unauthorized
copies of some commercially-produced film and videos and their soundtracks. When
a prohibitet use of an unauthorized copy is detected, a message will be displayed and
playback or copying will be interrupted. More information about Cinavia technology is
provided at the Cinavia Online Consumer Information Center at http://www.cinavia.com.
To request additional information about Cinavia by email, send a postcard with your mailing
address to: Cinavia Consumer Information Center, P.O. Box 86851, San Diego CA, 92138,
USA.
This product incorporates proprietary technology under licence from Verance Corporation
and is protected by U.S. Patent 7,369,677 and other U.S. and worldwide patens issued
and pending as well as copyright and trade secret protection for certain aspects of such
technology. Cinavia is a trademark of Verance Corporation. Copyright 2004-2010 Verance
Corporation. All right reserved by Verance. Reverse engineering or disassembly is prohibited.
20
02285B-BD-F5100-ZC-ENG.indd 20
2013-01-21 오후 6:39:28
Network Service Disclaimer
All content and services accessible through this device belong to third parties and are
protected by copyright, patent, trademark and/or other intellectual property laws. Such
content and services are provided solely for your personal noncommercial use. You may not
use any content or services in a manner that has not been authorized by the content owner or
service provider. Without limiting the foregoing, unless expressly authorized by the applicable
content owner or service provider, you may not modify, copy, republish, upload, post, transmit,
translate, sell, create derivative works, exploit, or distribute in any manner or medium any
content or services displayed through this device.
THIRD PARTY CONTENT AND SERVICES ARE PROVIDED "AS IS." SAMSUNG DOES NOT
WARRANT CONTENT OR SERVICES SO PROVIDED, EITHER EXPRESSLY OR IMPLIEDLY,
FOR ANY PURPOSE. SAMSUNG EXPRESSLY DISCLAIMS ANY IMPLIED WARRANTIES,
INCLUDING BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. SAMSUNG DOES NOT GUARANTEE THE ACCURACY, VALIDITY,
TIMELINESS, LEGALITY, OR COMPLETENESS OF ANY CONTENT OR SERVICE MADE
AVAILABLE THROUGH THIS DEVICE AND UNDER NO CIRCUMSTANCES, INCLUDING
NEGLIGENCE, SHALL SAMSUNG BE LIABLE, WHETHER IN CONTRACT OR TORT,
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES,
ATTORNEY FEES, EXPENSES, OR ANY OTHER DAMAGES ARISING OUT OF, OR IN
CONNECTION WITH, ANY INFORMATION CONTAINED IN, OR AS A RESULT OF THE USE
OF ANY CONTENT OR SERVICE BY YOU OR ANY THIRD PARTY, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Third party services may be terminated or interrupted at any time, and Samsung makes no
representation or warranty that any content or service will remain available for any period
of time. Content and services are transmitted by third parties by means of networks and
transmission facilities over which Samsung has no control. Without limiting the generality of
this disclaimer, Samsung expressly disclaims any responsibility or liability for any interruption or
suspension of any content or service made available through this device.
Samsung is neither responsible nor liable for customer service related to the content and
services. Any question or request for service relating to the content or services should be made
directly to the respective content and service providers.
License
• Manufactured under license from Dolby Laboratories. Dolby and the
double-D symbol are trademarks of Dolby Laboratories.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380;
6,487,535 & other U.S. and worldwide patents issued & pending. DTS, the
Symbol & DTS and the Symbol together are registered trademarks & DTS
2.0+Digital Out is a trademark of DTS, Inc. Product includes software. © DTS, Inc. All Rights
2.0+Digital Out
Reserved.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
• Oracle and Java are registered trademarks of Oracle and/or its affiliates.
Other names may be trademarks of their respective owners
• Open Source License Notice
-- In the case of using open source software, Open Source Licenses are available on the
product menu.
• Blu-ray Disc™, Blu-ray™ and the logos are trademarks of the Blu-ray Disc Association.
• DLNA®, the DLNA Logo and DLNA CERTIFIED® are trademarks,
service marks, or certification marks of the Digital Living Network
Alliance.
21
02285B-BD-F5100-ZC-ENG.indd 21
2013-01-21 오후 6:39:29
LIMITED WARRANTY TO ORIGINAL PURCHASER
Samsung Electronics Canada Inc.(SECA), warrants that this product is free from defective material and workmanship.
SECA further warrants that if this product falls to operate properly within the specified warranty period and the failure is due to improper workmanship or
defective materials, SECA will repair or replace the product at its option.
All warranty repairs must be performed by a SECA Authorized Service Center. (The name and address of the location nearest you can be obtained by
calling toll free: 1- 800- SAMSUNG)
LABOR
PARTS
One year (Carry- in)
One year
On carry-in models, transportation to and from the service center is the customer's responsibility.
The original dated sales receipt must be retained by the customer and is the only acceptable proof of purchase. It must be presented to the authorized
service center at the time service is requested.
EXCLUSIONS (WHAT IS NOT COVERED)
This warranty does not cover damage due to accident, fire, flood and/ or other acts of God; misuse, incorrect line voltage, improper installation, improper
or unauthorized repairs, commercial use or damage that occurs in shipping. Exterior and interior finish, lamps, glass are not covered under this warranty.
Customer adjustments which are explained in the instruction manual are not covered under the terms of this warranty. This warranty will automatically be
voided for any unit found with a missing or altered serial number. This warranty is valid only on products purchased and used in Canada.
HEADQUARTERS
Samsung Electronics Canada Inc.,
Customer Service
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
1-800-SAMSUNG (1-800-7267864)
www.samsung.com/ca
02285B-BD-F5100-ZC-ENG.indd 22
2013-01-21 오후 6:39:30
HEADQUARTERS
Samsung Electronics Canada Inc.,
55 Standish Court Misisauga,
Ontario L5R 4B2 Canada
TEL: 1-800-SAMSUNG (1-800-7267864)
www.samsung.com/ca
Contact SAMSUNG WORLD WIDE
If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center.
` North America
Area
Contact Center 
CANADA
1-800-SAMSUNG(726-7864)
MEXICO
01-800-SAMSUNG(726-7864)
ARGENTINE
0800-333-3733
0800-124-421
4004-0000
800-SAMSUNG(726-7864)
From mobile 02-482 82 00
800-10-7260
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-27919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
1-800-SAMSUNG(726-7864)
0-800-100-5303
` Latin America
BRAZIL
CHILE
Bolivia
COLOMBIA
COSTA RICA
DOMINICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
PUERTO RICO
TRINIDAD & TOBAGO
VENEZUELA
Web Site
www.samsung.com/ca
www.samsung.com/ca_fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
AK68-02285B
02285B-BD-F5100-ZC-ENG.indd 23
2013-01-21 오후 6:39:30
BD-F5100
www.samsung.com/register
02285B-BD-F5100-ZC-FRC.indd 1
2013-01-21 오후 6:37:19
Produit AVEC DISPOSITIF AU LASER
DE CLASSE 1
Avertissement
POUR RÉDUIRE LES RISQUES D’ÉLECTROCUTION, NE RETIREZ PAS LE COUVERCLE (NI
LE PANNEAU ARRIÈRE).
AUCUNE PIÈCE SITUÉE À L'INTÉRIEUR NE PEUT ÊTRE RÉPARÉE PAR L'UTILISATEUR.
POUR TOUT DÉPANNAGE, ADRESSEZ-VOUS À UN TECHNICIEN QUALIFIÉ.
ATTENTION
AVERTISSEMENT
RISQUE D’ÉLECTROCUTION
NE PAS OUVRIR
ATTENTION : AFIN DE RÉDUIRE LES
RISQUES DE CHOCS ÉLECTRIQUES, NE PAS
RETIRER LE COUVERCLE (OU LE PANNEAU
ARRIÈRE). L'APPAREIL NE CONTIENT PAS
DE PIÈCES EXIGEANT UN ENTRETIEN DE
LA PART DE L’UTILISATEUR. CONFIER
L’ENTRETIEN À UN PERSONNEL QUALIFIÉ.
2
02285B-BD-F5100-ZC-FRC.indd 2
✎✎ REMARQUE
LASER PRODUCT
LASER PRODUKT
LASER LAITE
LASER APPARAT
LÁSER CLASE 1
2013-01-21 오후 6:37:20
02285B-BD-F5100-ZC-FRC.indd 3
Contenus
Configuration
3
2013-01-21 오후 6:37:20
VIDEO
MUSIC
PHOTO
✎✎ REMARQUE
Type de disque
Blu-ray Disc
DVD-VIDEO
DVD-RW
DVD-R
DVD+RW
DVD+R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
CD-RW/-R,
DVD-RW/-R,
BD-RE/-R
4
02285B-BD-F5100-ZC-FRC.indd 4
a
DVDVIDÉO
1
BD-LIVE
Formats de fichiers pris en
charge
2013-01-21 오후 6:37:20
*.avi
AVI
*.mkv
MKV
*.wmv
WMV (wmv9)
*.mp4
MP4
*.mpg
*.mpeg
PS
Codec vidéo
MP4v3
H.264 BP/MP/HP
VC-1 AP
H.264 BP/MP/HP
VC-1 AP
VC-1 SM
MP4 (mp4v)
H.264 BP/MP/HP
MPEG1
MPEG2
H.264 BP/MP/HP
Codec audio
MP3
Dolby Digital
DTS
WMA
PCM
MP3
Dolby Digital
DTS
WMA
AAC
MP1, 2
Dolby Digital
DTS
Résolution
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
1920x1080
02285B-BD-F5100-ZC-FRC.indd 5
Codec audio
*.mp3
MP3
MP3
-
*.wma
WMA
WMA
Prise en charge des fichiers d’images
Extension de fichier
*.jpg
*.jpeg
*.jpe
*.png
Type
JPEG
15360x8640
PNG
15360x8640
5
2013-01-21 오후 6:37:21
BOUTON LECTURE/PAUSE
BOUTON ARRÊT
BOUTON OUVERTURE/
FERMETURE
BOUTON MARCHE/ARRÊT
✎✎ REMARQUE
✎✎ REMARQUE
TIROIR DISQUE
CAPTEUR DE LA TÉLÉCOMMANDE
USB HOST
VIEW
6
02285B-BD-F5100-ZC-FRC.indd 6
A-B
FULL
SCREEN
HDMI OUT
LAN
DIGITAL AUDIO OUT
2013-01-21 오후 6:37:21
Branchements
BONUS REPEAT REPEAT
VIEW
A-B
SCREEN
✎✎ REMARQUE
!!
02285B-BD-F5100-ZC-FRC.indd 7
FULL
Audio
Vidéo
✎✎ REMARQUE
2013-01-21 오후 6:37:22
Ou
Modem large
bande
Service
large bande
✎✎ REMARQUE
8
02285B-BD-F5100-ZC-FRC.indd 8
2013-01-21 오후 6:37:23
Configuration
✎✎ REMARQUE
02285B-BD-F5100-ZC-FRC.indd 9
2
3
4
5
6
✎✎ REMARQUE
1
1
3
2
1
2
3
4
4
FULL
SCREEN
• Menu Accueil
1
Photos
2
5
4
App1
Pas de Disque
2.
3.
4.
5.
1.
App2
App3
3
✎✎ REMARQUE
Format TV
✎✎ REMARQUE
✎✎ REMARQUE
9
2013-01-21 오후 6:37:24
1080p
1080i
720p
480p
10
02285B-BD-F5100-ZC-FRC.indd 10
✎✎ REMARQUE
Trame vidéo (24Fs)
Mode progressif
Coaxial
PCM 2 ca
PCM
PCM 2 ca
PCM 2 ca
Dolby Digital
Dolby Digital
Dolby Digital Plus PCM 2 ca
PCM 2 ca
Dolby Digital
Plus
Dolby Digital
DTS
DTS
Dolby TrueHD
PCM 2 ca
PCM 2 ca Dolby TrueHD Dolby Digital
DTS
PCM 2 ca
PCM 2 ca
DTS-HD High
Resolution Audio
PCM 2 ca
PCM 2 ca
Coaxial
PCM 2 ca
PCM
Aucune
PCM 2 ca
PCM 2 ca
PCM 2 ca
PCM 2 ca
PCM 2ch
PCM 2 ca
PCM 2 ca
PCM 2 ca
TS-HD High
Resolution
DTS
Audio
DTS-HD
DTS
Master Audio
PCM 2 ca
PCM 2 ca
Dolby Digital Dolby Digital
DTS
DTS
2013-01-21 오후 6:37:24
✎✎ REMARQUE
02285B-BD-F5100-ZC-FRC.indd 11
✎✎ REMARQUE
Audio Config. prot. Internet
Résea
: 0
0
0
0
0
Passerelle:
0
Language
DNS
: Auto
0
Serveur DNS
:Auto
: 0
0
0
0
0
0
\
0
0
4.
5.
✎✎ REMARQUE
6.
7.
8.
9.
11
2013-01-21 오후 6:37:25
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
✎✎ REMARQUE
12
02285B-BD-F5100-ZC-FRC.indd 12
2.
3.
✎✎ REMARQUE
Fonction DLNA
3.
2.
4.
5.
Paramètre initial
Démarr. rapide
✎✎ REMARQUE
Anynet+ (HDMI-CEC)
✎✎ REMARQUE
2013-01-21 오후 6:37:25
✎✎ REMARQUE
02285B-BD-F5100-ZC-FRC.indd 13
✎✎ REMARQUE
5.
En ligne
To upgrade By Online, follow these steps:
1.
2.
3.
✎✎ REMARQUE
4.
5.
✎✎ REMARQUE
13
2013-01-21 오후 6:37:25
USB
Allez à www.samsung.com/
bluraysupport.
2.
3.
4.
5.
6.
7.
✎✎ REMARQUE
14
02285B-BD-F5100-ZC-FRC.indd 14
2.
3.
4.
✎✎ REMARQUE
Contacter Samsung
Reset
Media Play
1.
2.
3.
Allez au menu Accueil.
3.
2.
4.
5.
2013-01-21 오후 6:37:25
Photos
Pas de Disque
123
a
123
6.
1
App2
App3
a
App1
123
App2
App3
d Accueil " Entrer
7.
8.
9.
02285B-BD-F5100-ZC-FRC.indd 15
✎✎ REMARQUE
✎✎ REMARQUE
2.
✎✎ REMARQUE
3.
4.
5.
6.
7.
Allez au menu Accueil.
3.
2.
4.
✎✎ REMARQUE
5.
6.
7.
15
2013-01-21 오후 6:37:27
8.
9.
1
Pauses playback.
VIEW
A-B
FULL
SCREEN
16
02285B-BD-F5100-ZC-FRC.indd 16
Bouton TITLE
MENU
Bouton POPUP
MENU
Buttons on the Remote Control
used for Music Playback
TRACK 001
TRACK 002
Information
< Régler > Move ' Retour04:27
TRACK 003
+
00:08 / 05:57
04:07
TRACK 004
03:41
TRACK 005
03:17
TRACK 006
1
2
3
1
4
2.
5
6
3.
CD
" Pause
03:35
Arrêt
(
) Piste
2
(
) Tous
3
(
4
5
6
BONUS REPEAT REPEAT
FULL
SCREEN
2013-01-21 오후 6:37:27
✎✎ REMARQUE
TRACK 001
02:38
02:38
TRACK 001
TRACK 001
02:38
TRACK 001
TRACK 001
TRACK 001
02:38
02:38
TRACK 001
TRACK 001
02:38
02:38
2.
3.
4.
5.
6.
02:38
02:38
CD
02:38
TRACK 001
✎✎ REMARQUE
Fond musical
Zoom
Pivoter
Information
Affiche les informations sur
l'image.
17
02285B-BD-F5100-ZC-FRC.indd 17
2013-01-21 오후 6:37:28
PROBLÈME
Dépannage
SOLUTION
18
02285B-BD-F5100-ZC-FRC.indd 18
SOLUTION
2013-01-21 오후 6:37:28
PROBLÈME
BD-LIVE
✎✎ REMARQUE
Poids
2.2 Ibs
Dimensions
10,6 (W) X 7,6 (D) X 1,6 (H) pouces
10 % à 75 %
Sortie CC
5V 500mA Max.
Audio
PCM, Train de bits
Type A
Video
USB 2.0
1080p, 1080i, 720p, 480p
Coaxial
100BASE - Terminal TX
19
02285B-BD-F5100-ZC-FRC.indd 19
2013-01-21 오후 6:37:28
20
02285B-BD-F5100-ZC-FRC.indd 20
• Pour la sortie en mode de lecture progressive du lecteur Blu-ray : LES
CONSOMMATEURS DEVRAIENT NOTER QUE TOUS LES TÉLÉVISEURS HAUTE
DÉFINITION NE SONT PAS TOTALEMENT COMPATIBLES AVEC CE PRODUIT ET
PEUVENT CAUSER CERTAINS PARASITES À L’ÉCRAN. EN CAS DE PROBLÈMES D’IMAGE
EN COURS DE BALAYAGE PROGRESSIF, NOUS VOUS CONSEILLONS DE BRANCHER
L’APPAREIL SUR LA SORTIE « DÉFINITION NORMALE ».
SI DES QUESTIONS SUBSISTENT QUANT À LA COMPATIBILITÉ DE VOTRE TÉLÉVISEUR
AVEC CE PRODUIT, VEUILLEZ CONTACTER NOTRE CENTRE DE SERVICE À LA
CLIENTÈLE.
Protection contre la copie
2013-01-21 오후 6:37:28
21
02285B-BD-F5100-ZC-FRC.indd 21
2013-01-21 오후 6:37:29
GARANTIE LIMITEE A L’ACHETEUR INITIAL
SAMSUNG ELECTRONICS CANADA INC. (SECA) GARANTIT CE PRODUIT CONTRE TOUT DÉFAUT DE FABRICATION.
SECA GARANTIT AUSSI QUE SI CET APPAREIL NE FONCTIONNE PAS CONVENABLEMENT DURANT LA PÉRIODE DE GARANTIE SECA SE
RÉSERVERA LE DROIT DE RÉPARER OU DE REMPLACER L’APPAREIL DÉFECTUEUX. TOUTES LES RÉPARATIONS SOUS GARANTIE DOIVENT
ÊTRE EFFECTUÉES PAR UN CENTRE DE SERVICE AUTORISÉ SECA.
LE NOM ET L’ADRESSE DU CENTRE DE SERVICE LE PLUS PRÈS DE CHEZ VOUS PEUT ÊTRE OBTENU EN COMPOSANT SANS FRAIS LE 1-800268-1620 OU EN VISITANT NOTRE SITE WEB AU WWW.SAMSUNG.CA
un (1) an
POUR TOUS LES MODÈLES PORTATIFS, LE TRANSPORT DE L’APPAREIL SERA LA RESPONSABILITÉ DU CLIENT.
LE REÇU DE VENTE ORIGINAL DOIT ÊTRE CONSERVÉ PAR LE CLIENT CAR CELA CONSTITUE LA SEULE PREUVE D’ACHAT ACCEPTÉE.
LE CLIENT DOIT LE PRÉSENTER AU CENTRE DE SERVICE AGRÉÉ AU MOMENT OÙ IL FAIT LA DEMANDE D’UNE RÉPARATION SOUS GARANTIE.
EXCLUSIONS (CE QUI N’EST PAS COUVERT)
CETTE GARANTIE NE COUVRE PAS LES DOMMAGES CAUSÉS PAR UN ACCIDENT, UN INCENDIE, UNE INONDATION, UN CAS DE FORCE MAJEURE, UN MAUVAIS
USAGE OU UNE TENSION INCORRECTE. LA GARANTIE NE COUVRE PAS UNE MAUVAISE INSTALLATION, UNE MAUVAISE RÉPARATION, UNE RÉPARATION
NON AUTORISÉE ET TOUT USAGE COMMERCIAL OU DOMMAGES SURVENUS DURANT LE TRANSPORT. LE FINI EXTÉRIEUR ET INTÉRIEUR DE MÊME QUE LES
LAMPES NE SONT PAS COUVERTS PAR CETTE GARANTIE. LES AJUSTEMENTS PAR LE CLIENT QUI SONT EXPLIQUÉS DANS LE GUIDE DE L’UTILISATEUR NE
SONT PAS COUVERTS EN VERTU DE CETTE GARANTIE. CETTE GARANTIE SERA AUTOMATIQUEMENT ANNULÉE POUR TOUT APPAREIL QUI AURAIT UN NUMÉRO
DE SÉRIE MANQUANT OU MODIFIÉ. CETTE GARANTIE EST VALABLE SEULEMENT SUR LES APPAREILS ACHETÉS ET UTILISÉS AU CANADA.
SIÈGE SOCIAL
Samsung Electronique Canada Inc.,
Service à la Clientèle
55 Standish Court Mississauga, Ontario L5R 4B2 Canada
FABRIQUE EN CORÉE
1-800-SAMSUNG (1-800-7267864)
www.samsung.com/ca
02285B-BD-F5100-ZC-FRC.indd 22
2013-01-21 오후 6:37:29
Contacter SAMSUNG À TRAVERS LE MONDE
SIÈGE SOCIAL
SAMSUNG ELECTRONIQUE CANADA
INC.,
55 STANDISH COURT MISSISSAUGA,
ONTARIO L5R 4B2 CANADA
TEL: 1-800-SAMSUNG (1-800-7267864)
WWW.SAMSUNG.COM/CA
Area
Contact Center 
CANADA
1-800-SAMSUNG(726-7864)
MEXICO
01-800-SAMSUNG(726-7864)
ARGENTINE
0800-333-3733
0800-124-421
4004-0000
800-SAMSUNG(726-7864)
From mobile 02-482 82 00
800-10-7260
01-8000112112
0-800-507-7267
1-800-751-2676
1-800-10-7267
800-6225
1-800-299-0013
800-27919267
1-800-234-7267
00-1800-5077267
800-7267
0-800-777-08
1-800-682-3180
1-800-SAMSUNG(726-7864)
0-800-100-5303
` Latin America
BRAZIL
CHILE
Bolivia
COLOMBIA
COSTA RICA
DOMINICA
ECUADOR
EL SALVADOR
GUATEMALA
HONDURAS
JAMAICA
NICARAGUA
PANAMA
PERU
PUERTO RICO
TRINIDAD & TOBAGO
VENEZUELA
Web Site
www.samsung.com/ca
www.samsung.com/ca_fr (French)
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
www.samsung.com
AK68-02285B
AK68-02285B
02285B-BD-F5100-ZC-FRC.indd 23
2013-01-21 오후 6:37:29