America
Version 1.0
Published June 2014
Copyright©2014 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.
Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identiication or explanation and to the owners’ beneit, without intent to
infringe.
Disclaimer:
Speciications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or itness for a particular
purpose.
In no event shall ASRock, its directors, oicers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of proits, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.
his device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
CALIFORNIA, USA ONLY
he Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/
perchlorate”
ASRock Website: http://www.asrock.com
he terms HDMI™ and HDMI High-Deinition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.
Z97 Anniversary
Motherboard Layout
1
2
4
3
USB 2.0
T: USB0
B: USB1
Ps2
Keyboard/
Mouse
ATX12V1
ATXPWR1
DDR3_B2 (64 bit, 240-pin module)
Top:
RJ-45
DDR3_B1 (64 bit, 240-pin module)
USB 3.0
T: USB2
B: USB3
DDR3_A2 (64 bit, 240-pin module)
DDR3_A1 (64 bit, 240-pin module)
HDMI1
USB 3.0
T: USB0
B: USB1
25
5
CPU_FAN2
Center:
FRONT
Top:
LINE IN
Bottom:
MIC IN
Z97 Anniversary
24
CPU_FAN1
USB3_4_5
PCIE1
1
6
LAN
PCIE2
7
CMOS
Battery
64Mb
BIOS
Intel
Z97
PCIE3
Super
I/O
PCIE4
SATA3_1
SATA3_0
RoHS
8
9
1
SATA3_3
PCI1
PCI2
USB2_3
PLED PWRBTN
CLRCMOS1
1
TPMS1
1
13
14
USB4_5
COM1
1
11
12
1
PLED1
1
1
1
1
PANEL1
22
21
20
19
18
17
16
English
23
SATA3_5
15
1
No. Description
English
2
1
Power Fan Connector (PWR_FAN1)
2
ATX 12V Power Connector (ATX12V1)
3
2 x 240-pin DDR3 DIMM Slots (DDR3_A1, DDR3_B1)
4
2 x 240-pin DDR3 DIMM Slots (DDR3_A2, DDR3_B2)
5
ATX Power Connector (ATXPWR1)
6
7
Chassis Fan Connector (CHA_FAN2)
8
SATA3 Connector (SATA3_1)
9
SATA3 Connector (SATA3_0)
10
SATA3 Connector (SATA3_3)
11
SATA3 Connector (SATA3_2)
12
SATA3 Connector (SATA3_5)
13
SATA3 Connector (SATA3_4)
14
Chassis Fan Connector (CHA_FAN1)
15
System Panel Header (PANEL1)
16
17
18
19
TPM Header (TPMS1)
20
Chassis Speaker Header (SPEAKER1)
21
Clear CMOS Jumper (CLRCMOS1)
22
COM Port Header (COM1)
23
Front Panel Audio Header (HD_AUDIO1)
24
CPU Fan Connector (CPU_FAN1)
25
CPU Fan Connector (CPU_FAN2)
Z97 Anniversary
I/O Panel
1
9
8
7
2
3
4
6
5
No. Description
No. Description
1
USB 2.0 Ports (USB01)
6
USB 3.0 Ports (USB3_23)
2
7
USB 3.0 Ports (USB3_01)
3
Line In (Light Blue)
8
4
Front Speaker (Lime)
9
PS/2 Mouse/Keyboard Port
5
Microphone (Pink)
* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
Speed LED
Status
Status
Description
Of
Blinking
On
No Link
Data Activity
Link
Of
Orange
Green
English
Activity / Link LED
3
Chapter 1 Introduction
hank you for purchasing ASRock Z97 Anniversary motherboard, a reliable
motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s
commitment to quality and endurance.
Because the motherboard speciications and the BIOS sotware might be updated, the
content of this manual will be subject to change without notice. In case any modiications of this manual occur, the updated version will be available on ASRock’s website
without further notice. If you require technical support related to this motherboard,
please visit our website for speciic information about the model you are using. You
may ind the latest VGA cards and CPU support list on ASRock’s website as well.
ASRock website http://www.asrock.com.
1.1 Package Contents
• ASRock Z97 Anniversary Motherboard (ATX Form Factor)
• ASRock Z97 Anniversary Quick Installation Guide
• ASRock Z97 Anniversary Support CD
• 2 x Serial ATA (SATA) Data Cables (Optional)
• 1 x I/O Panel Shield
English
4
Z97 Anniversary
1.2 Speciications
Platform
• ATX Form Factor
• Solid Capacitor design
• High Density Glass Fabric PCB
CPU
th
TM
• Supports 5 Generation Intel® Core i7/i5/i3/Pentium®/
Celeron® Processors (Socket 1150)
th
th
TM
• Supports New 4 and 4 Generation Intel® Xeon®/Core i7/
i5/i3/Pentium®/Celeron® Processors (Socket 1150)
• Digi Power design
• 4 Power Phase design
• Supports Intel® Turbo Boost 2.0 Technology
• Supports Intel® K-Series unlocked CPUs
• Supports ASRock BCLK Full-range Overclocking
Chipset
Memory
• Dual Channel DDR3 Memory Technology
• 4 x DDR3 DIMM Slots
• Supports DDR3 3100+(OC)/2933(OC)/2800(OC)/2400(OC)/
2133(OC)/1866(OC)/1600/1333/1066 non-ECC, un-bufered
memory
• Max. capacity of system memory: 32GB (see CAUTION)
• Supports Intel® Extreme Memory Proile (XMP) 1.3 / 1.2
Expansion
Slot
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)
• 3 x PCI Express 2.0 x1 Slots
• 2 x PCI Slots
• Intel® HD Graphics Built-in Visuals and the VGA outputs can
be supported only with processors which are GPU integrated.
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick
Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® HD Graphics 4400/4600
English
Graphics
• Pixel Shader 5.0, DirectX 11.1
• Max. shared memory 1792MB
5
• Supports HDMI with max. resolution up to 1920x1200 @
60Hz
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and
HBR (High Bit Rate Audio) with HDMI Port (Compliant
HDMI monitor is required)
• Supports HDCP with HDMI Port
• Supports Full HD 1080p Blu-ray (BD) playback with HDMI
Port
Audio
• 7.1 CH HD Audio (Realtek ALC887 Audio Codec)
* To conigure 7.1 CH audio, please use an HD front panel audio
module and enable the multi-channel audio feature through the
audio driver.
• Supports Surge Protection (ASRock Full Spike Protection)
• ELNA Audio Caps
LAN
• Gigabit LAN 10/100/1000 Mb/s
• Giga PHY Intel® I218V
• Supports Intel® Remote Wake Technology
• Supports Wake-On-LAN
• Supports Lightning/ESD Protection (ASRock Full Spike
Protection)
• Supports Energy Eicient Ethernet 802.3az
• Supports PXE
• 1 x PS/2 Mouse/Keyboard Port
• 1 x HDMI Port
• 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full
Spike Protection))
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED
LED)
English
• HD Audio Jacks: Line in / Front Speaker / Microphone
6
Z97 Anniversary
Storage
• 6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology
13 and Intel Smart Response Technology), NCQ, AHCI and
Hot Plug
Connector
• 1 x COM Port Header
• 1 x TPM Header
• 1 x Power LED Header
• 2 x CPU Fan Connectors (1 x 4-pin, 1 x 3-pin)
• 2 x Chassis Fan Connectors (2 x 4-pin)
• 1 x Power Fan Connector (3-pin)
• 1 x 24 pin ATX Power Connector
• 1 x 8 pin 12V Power Connector
• 1 x Front Panel Audio Connector
• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))
• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD
Protection (ASRock Full Spike Protection))
BIOS
Feature
• 64Mb AMI UEFI Legal BIOS with multilingual GUI support
• ACPI 1.1 Compliant wake up events
• SMBIOS 2.3.1 support
• CPU, DRAM, PCH 1.05V Voltage multi-adjustment
Hardware
Monitor
• CPU/Chassis temperature sensing
• CPU/Chassis/Power Fan Tachometer
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
CPU temperature)
OS
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
Certiications
• FCC, CE, WHQL
• ErP/EuP ready (ErP/EuP ready power supply is required)
English
• CPU/Chassis Fan multi-speed control
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
* For detailed product information, please visit our website: http://www.asrock.com
7
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using thirdparty overclocking tools. Overclocking may afect your system’s stability, or even cause
damage to the components and devices of your system. It should be done at your own
risk and expense. We are not responsible for possible damage caused by overclocking.
Due to limitation, the actual memory size may be less than 4GB for the reservation
for system usage under Windows® 32-bit operating systems. Windows® 64-bit operating systems do not have such limitations. You can use ASRock XFast RAM to utilize
the memory that Windows® cannot use.
English
8
Z97 Anniversary
Chapter 2 Installation
his is an ATX form factor motherboard. Before you install the motherboard, study
the coniguration of your chassis to ensure that the motherboard its into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components
or change any motherboard settings.
• Make sure to unplug the power cord before installing or removing the motherboard
components. Failure to do so may cause physical injuries and damages to motherboard
components.
• In order to avoid damage from static electricity to the motherboard’s components,
NEVER place your motherboard directly on a carpet. Also remember to use a grounded
wrist strap or touch a safety grounded object before you handle the components.
• Hold components by the edges and do not touch the ICs.
• Whenever you uninstall any components, place them on a grounded anti-static pad or
in the bag that comes with the components.
English
• When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
9
2.1 Installing the CPU
1. Before you insert the 1150-Pin CPU into the socket, please check if the PnP cap is on
the socket, if the CPU surface is unclean, or if there are any bent pins in the socket.
Do not force to insert the CPU into the socket if above situation is found. Otherwise,
the CPU will be seriously damaged.
2. Unplug all power cables before installing the CPU.
1
A
B
2
English
10
Z97 Anniversary
3
4
English
5
11
Please save and replace the cover if the processor is removed. he cover must be placed
if you wish to return the motherboard for ater service.
English
12
Z97 Anniversary
2.2 Installing the CPU Fan and Heatsink
2
English
CP
U_
FA
N
1
13
2.3 Installing Memory Modules (DIMM)
his motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots,
and supports Dual Channel Memory Technology.
1. For dual channel coniguration, you always need to install identical (the same
brand, speed, size and chip-type) DDR3 DIMM pairs.
2. It is unable to activate Dual Channel Memory Technology with only one or three
memory module installed.
3. It is not allowed to install a DDR or DDR2 memory module into a DDR3 slot;
otherwise, this motherboard and DIMM may be damaged.
Dual Channel Memory Coniguration
Priority
1
2
3
DDR3_A1
DDR3_A2
DDR3_B1
Populated
Populated
Populated
Populated
DDR3_B2
Populated
Populated
Populated
Populated
he DIMM only its in one correct orientation. It will cause permanent damage to
the motherboard and the DIMM if you force the DIMM into the slot at incorrect
orientation.
English
14
Z97 Anniversary
1
2
English
3
15
2.4 Expansion Slots (PCI and PCI Express Slots)
here are 2 PCI slots and 4 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is
switched of or the power cord is unplugged. Please read the documentation of the
expansion card and make necessary hardware settings for the card before you start
the installation.
PCI slots:
he PCI1 and PCI2 slots are used to install expansion cards that have 32-bit PCI
interface.
PCIe slots:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE4 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.
English
16
Z97 Anniversary
2.5 Jumpers Setup
he illustration shows how jumpers are setup. When the jumper cap is placed on
the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper
is “Open”. he illustration shows a 3-pin jumper whose pin1 and pin2 are “Short”
when a jumper cap is placed on these 2 pins.
Clear CMOS Jumper
(CLRCMOS1)
(see p.1, No. 21)
Default
Clear CMOS
English
CLRCMOS1 allows you to clear the data in CMOS. To clear and reset the system
parameters to default setup, please turn of the computer and unplug the power
cord from the power supply. Ater waiting for 15 seconds, use a jumper cap to
short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear
the CMOS right ater you update the BIOS. If you need to clear the CMOS when
you just inish updating the BIOS, you must boot up the system irst, and then shut
it down before you do the clear-CMOS action. Please be noted that the password,
date, time, and user default proile will be cleared only if the CMOS battery is
removed.
17
2.6 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over
these headers and connectors. Placing jumper caps over the headers and connectors
will cause permanent damage to the motherboard.
System Panel Header
(9-pin PANEL1)
(see p.1, No. 15)
PLED+
PLEDPWRBTN#
GND
Connect the power
switch, reset switch and
system status indicator on
the chassis to this header
according to the pin
assignments below. Note
the positive and negative
pins before connecting
the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may conigure the way to
turn of your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart
the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. he LED is on when
the system is operating. he LED keeps blinking when the system is in S1/S3 sleep state.
he LED is of when the system is in S4 sleep state or powered of (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. he LED is on when
the hard drive is reading or writing data.
he front panel design may difer by chassis. A front panel module mainly consists
of power switch, reset switch, power LED, hard drive activity LED, speaker and etc.
When connecting your chassis front panel module to this header, make sure the wire
assignments and the pin assignments are matched correctly.
English
18
Z97 Anniversary
USB 3.0 Header
(19-pin USB3_4_5)
(see p.1, No. 6)
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
Serial ATA3 Connectors
(SATA3_0:
see p.1, No. 9)
(SATA3_1:
see p.1, No. 8)
(SATA3_2:
see p.1, No. 11)
(SATA3_3:
see p.1, No. 10)
(SATA3_4:
see p.1, No. 13)
(SATA3_5:
see p.1, No. 12)
USB 2.0 Headers
(9-pin USB2_3)
(see p.1, No. 17)
(9-pin USB4_5)
(see p.1, No. 18)
Please connect the chassis
power LED to this header
to indicate the system’s
power status.
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
Front Panel Audio Header
(9-pin HD_AUDIO1)
(see p.1, No. 23)
GND
PRESENCE#
MIC_RET
OUT_RET
hese six SATA3
connectors support SATA
data cables for internal
storage devices with up to
6.0 Gb/s data transfer rate.
Besides two USB 2.0 ports
on the I/O panel, there
are two headers on this
motherboard. Each USB
2.0 header can support
two ports.
Besides four USB 3.0
ports on the I/O panel,
there is one header on this
motherboard. Each USB
3.0 header can support
two ports.
his header is for
connecting audio devices
to the front audio panel.
English
Power LED Header
(3-pin PLED1)
(see p.1, No. 16)
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
19
1. High Deinition Audio supports Jack Sensing, but the panel wire on the chassis must
support HDA to function correctly. Please follow the instructions in our manual and
chassis manual to install your system.
2. If you use an AC’97 audio panel, please install it to the front panel audio header by
the steps below:
A. Connect Mic_IN (MIC) to MIC2_L.
B. Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_RET and OUT_RET are for the HD audio panel only. You don’t need to
connect them for the AC’97 audio panel.
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel
and adjust “Recording Volume”.
Chassis Speaker Header
(4-pin SPEAKER1)
(see p.1, No. 20)
Chassis and Power Fan
Connectors
(4-pin CHA_FAN1)
(see p.1, No. 14)
English
(3-pin CPU_FAN2)
(see p.1, No. 25)
20
+12V
2
3
4
Please connect fan cables
to the fan connectors and
match the black wire to
the ground pin.
GND
1
(3-pin PWR_FAN1)
(see p.1, No. 1)
CPU Fan Connectors
(4-pin CPU_FAN1)
(see p.1, No. 24)
DUMMY
(4-pin CHA_FAN2)
(see p.1, No. 7)
Please connect the chassis
speaker to this header.
GND
1
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
his motherboard provides a 4-Pin CPU fan
(Quiet Fan) connector.
If you plan to connect a
3-Pin CPU fan, please
connect it to Pin 1-3.
Z97 Anniversary
ATX Power Connector
(24-pin ATXPWR1)
(see p.1, No. 5)
ATX 12V Power
Connector
(8-pin ATX12V1)
(see p.1, No. 2)
Serial Port Header
(9-pin COM1)
(see p.1, No. 22)
12
24
1
13
his motherboard provides a 24-pin ATX power
connector. To use a 20-pin
ATX power supply, please
plug it along Pin 1 and Pin
13.
8
5
4
1
his motherboard provides an 8-pin ATX 12V
power connector. To use a
4-pin ATX power supply,
please plug it along Pin 1
and Pin 5.
his COM1 header
supports a serial port
module.
1
GND
+3VSB
1
his connector supports
Trusted Platform Module
(TPM) system, which can
securely store keys, digital
certiicates, passwords,
and data. A TPM system
also helps enhance
network security, protects
digital identities, and
ensures platform integrity.
English
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
LAD0
GND
FRAME
TPM Header
(17-pin TPMS1)
(see p.1, No. 19)
PCICLK
21
1.1 Lieferumfang
• ASRock Z97 Anniversary – Motherboard (ATX-Formfaktor)
• ASRock Z97 Anniversary – Schnellinstallationsanleitung
• ASRock Z97 Anniversary – Support-CD
• 2 x Serial-ATA- (SATA) Datenkabel (optional)
• 1 x E/A-Blendenabschirmung
Z97 Anniversary
Prozessor
Chipsatz
Graikkarte
23
Audio
LAN
24
Z97 Anniversary
25
Z97 Anniversary
Standard
27
PLED+
PLEDPWRBTN#
GND
28
Z97 Anniversary
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
29
30
GND
1
3
4
+12V
2
DUMMY
FAN_SPEED
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
Z97 Anniversary
12
24
1
13
8
5
4
1
1
GND
+3VSB
1
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
LAD0
GND
FRAME
PCICLK
31
Z97 Anniversary
1.2
Plateforme
Chipset
• Prend en charge la technologie Intel® HD Graphics Built-in Visuals:
Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG2 Full HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD
Technology, Intel® InsiderTM, Intel® HD Graphics 4400/4600
• Pixel Shader 5.0, DirectX 11.1
• Mémoire partagée max. 1792Mo
• Prend en charge HDMI avec une résolution maximale de
1920x1200 @ 60 Hz
33
Audio
Stockage
34
Z97 Anniversary
• Microsot® Windows® 10 64 bits / 8.1 32 bits / 8.1 64 bits / 8
32 bits / 8 64 bits / 7 32 bits / 7 64 bits
Certiications
• FCC, CE, WHQL
• ErP/EuP Ready (alimentation ErP/EuP ready requise)
• Surveillance de la tension d’alimentation : +12V, +5V,
+3,3V, CPU Vcore
35
Z97 Anniversary
Cavalier Clear CMOS
(CLRCMOS1)
(voir p.1, No. 21)
Fonction Clear CMOS
37
PLED+
PLEDPWRBTN#
GND
38
Z97 Anniversary
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
39
DUMMY
+12V
3
FAN_SPEED
FAN_SPEED_CONTROL
2
4
GND
1
+12V
2
3
4
40
GND
1
Z97 Anniversary
12
24
1
13
8
5
4
1
1
GND
+3VSB
PCICLK
1
GND
GND
+3V
LAD2
LAD1
LAD3
LAD0
SMB_CLK_MAIN
GND
FRAME
PCIRST#
41
Z97 Anniversary
CPU
Chipset
43
Audio
LAN
44
Z97 Anniversary
• 6 x Connettori SATA3 6,0 Gb/s, supportano RAID (RAID 0,
RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology 13
e Intel Smart Response Technology), NCQ, AHCI e Hot Plug
Italiano
Hardware
Monitor
SO
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
45
Z97 Anniversary
Azzerare la CMOS
47
PLED+
PLEDPWRBTN#
GND
Italiano
48
Z97 Anniversary
Header USB 3.0
(USB3_4_5 a 19 pin)
(vedere pag. 1, n. 6)
SATA3_5
SATA3_4
SATA3_3
SATA3_2
SATA3_1
SATA3_0
PLEDPLED+
PLED+
Connettori Serial ATA3
(SATA3_0:
vedere pag.1, n. 9)
(SATA3_1:
vedere pag. 1, n. 8)
(SATA3_2:
vedere pag. 1, n. 11)
(SATA3_3:
vedere pag.1, n. 10)
(SATA3_4:
vedere pag.1, n. 13)
(SATA3_5:
vedere pag.1, n. 12)
Header USB 2.0
(USB2_3 a 9 pin)
(vedere pag. 1, n. 17)
(USB4_5 a 9 pin)
(vedere pag. 1, n. 18)
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
49
Header altoparlante chassis
(SPEAKER1 a 4 pin)
(vedere pag. 1, n. 20)
2
+12V
3
4
(PWR_FAN1 a 3 pin)
(vedere pag. 1, n. 1)
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
GND
(CPU_FAN2 a 3 pin)
(vedere pag. 1, n. 25)
50
GND
1
(CHA_FAN2 a 4 pin)
(vedere pag. 1, n. 7)
DUMMY
Z97 Anniversary
Header porta seriale
(COM1 a 9 pin)
(vedere pag. 1, n. 22)
12
24
1
13
8
5
4
1
1
GND
+3VSB
PCICLK
1
Italiano
GND
GND
+3V
LAD2
LAD1
LAD3
LAD0
SMB_CLK_MAIN
GND
FRAME
Header TPM
(TPMS1 a 17 pin)
(vedere pag. 1, n. 19)
PCIRST#
51
Z97 Anniversary
CPU
53
Audio
LAN
54
Z97 Anniversary
Monitor
del hardware
SO
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
55
Z97 Anniversary
Predeterminado
57
PLED+
PLEDPWRBTN#
GND
58
Z97 Anniversary
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
Conectores Serie ATA3
(SATA3_0:
consulte la pág.1, N.º 9)
(SATA3_1:
consulte la pág.1, N.º 8)
(SATA3_2:
consulte la pág.1, N.º 11)
(SATA3_3:
consulte la pág.1, N.º 10)
(SATA3_4:
consulte la pág.1, N.º 13)
(SATA3_5:
consulte la pág.1, N.º 12)
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
59
DUMMY
GND
1
2
+12V
3
4
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
GND
60
Z97 Anniversary
12
24
1
13
8
5
4
1
1
GND
+3VSB
PCICLK
1
GND
GND
+3V
LAD2
LAD1
LAD3
LAD0
SMB_CLK_MAIN
GND
FRAME
PCIRST#
61
Z97 Anniversary
1.2 Спецификация
Платформа
ЦП
Чипсет
Слот
расширения
• 1 x Слот PCI Express 3.0 x16 (PCIE2:режим x16)
• 3 x PCI Express 2.0 x1 разъем
• 2 x Слот PCI
63
Аудио
64
Gigabit LAN 10/100/1000 Мб/с
Giga PHY Intel® I218V
Поддержка технологии Intel® Remote Wake Technology
Поддержка Wake-On-LAN
Молниезащита и защита электростатического
напряжения (ASRock Full Spike Protection)
• Поддержка Energy Eicient Ethernet 802.3az
• Поддержка PXE
Z97 Anniversary
•
•
•
•
•
•
•
•
•
•
•
65
ОС
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8
32-bit / 8 64-bit / 7 32-bit / 7 64-bit
66
Z97 Anniversary
67
PLED+
PLEDPWRBTN#
GND
68
Z97 Anniversary
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
69
70
DUMMY
1
GND
2
+12V
3
FAN_SPEED
4
FAN_SPEED_CONTROL
Предназначена для
подключения динамика
корпуса.
Z97 Anniversary
GND
1
+12V
2
3
FAN_SPEED_CONTROL
4
12
24
1
13
8
5
4
1
71
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
GND
FRAME
PCIRST#
GND
LAD0
+3VSB
PCICLK
1
Z97 Anniversary
73
CPU
Chipset
• 1 x Slot PCI Express 3.0 x16 (PCIE2:modo x16)
• 3 x Slots PCI Express 2.0 x1
• 2 x slots PCI
74
Z97 Anniversary
Áudio
LAN
E/S do
painel posterior
75
Armazenamento
Monitor de
hardware
76
SO
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
Z97 Anniversary
77
Apagar o Jumper CMOS
(CLRCMOS1)
(ver p.1, N.º 21)
Apagar CMOS
78
Z97 Anniversary
1.4 Suportes e conectores onboard
Os conectores e suportes onboard NÃO são jumpers. NÃO coloque tampas de jumpers
sobre estes terminais e conectores. Colocar tampas de jumpers sobre os terminais e conectores irá causar danos permanentes à placa-mãe.
79
SATA3_5
SATA3_4
SATA3_3
SATA3_2
SATA3_1
SATA3_0
PLEDPLED+
PLED+
Conectores série ATA3
(SATA3_0:
ver p.1, N.º 9)
(SATA3_1:
ver p.1, N.º 8)
(SATA3_2:
ver p.1, N.º 11)
(SATA3_3:
ver p.1, N.º 10)
(SATA3_4:
ver p.1, N.º 13)
(SATA3_5:
ver p.1, N.º 12)
Suportes USB 2.0
(USB2_3 de 9 pinos)
(ver p.1, N.º 17)
(USB4_5 de 9 pinos)
(ver p.1, N.º 18)
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
Suporte de áudio do painel
frontal
(HD_AUDIO1 de 9 pinos)
(ver p.1, N.º 23)
80
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
Z97 Anniversary
DUMMY
GND
1
(CHA_FAN2 4 pinos)
(ver p.1, N.º 7)
+12V
3
4
2
FAN_SPEED_CONTROL
GND
1
2
+12V
3
FAN_SPEED
4
FAN_SPEED_CONTROL
GND
(CPU_FAN2 de 3 pinos)
(ver p.1, N.º 25)
81
12
24
1
13
8
5
4
1
1
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
LAD0
GND
FRAME
Suporte TPM
(TPMS1 de 17 pinos)
(ver p.1, N.º 19)
PCICLK
82
GND
+3VSB
1
Z97 Anniversary
83
CPU
TM
• 5. Nesil Intel® Core i7/i5/i3/Pentium®/Celeron® İşlemcilerini
destekler (Soket 1150)
TM
• Yeni 4. ve 4. Nesil Intel® Xeon®/Core i7/i5/i3/Pentium®/
Celeron® İşlemcilerini destekler (Soket 1150)
Yonga
kümesi
Bellek
Graikler
84
Z97 Anniversary
Ses
LAN
Arka Panel
I/O
85
Depolama
• 6 x SATA3 6,0 Gb/s Bağlayıcısı, RAID (RAID 0, RAID 1, RAID
5, RAID 10, Intel Rapid Storage Technology 13 ve Intel Smart
Response Technology), NCQ, AHCI ve Tak Çıkar destekler
86
OS
• Microsot® Windows® 10 64 bit / 8.1 32 bit / 8.1 64 bit / 8 32 bit /
8 64 bit / 7 32 bit / 7 64 bit
Belgeler
Z97 Anniversary
87
CMOS'u Temizle
88
Z97 Anniversary
PLED+
PLEDPWRBTN#
GND
89
SATA3_3
SATA3_2
SATA3_5
SATA3_4
SATA3_1
SATA3_0
PLEDPLED+
PLED+
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
90
Z97 Anniversary
(3-pin CPU_FAN2)
(bkz sf.1, No. 25)
+12V
2
3
4
GND
1
(3-pin PWR_FAN1)
(bkz sf.1, No. 1)
DUMMY
(4-pin CHA_FAN2)
(bkz sf.1, No. 7)
FAN_SPEED
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
GND
91
24
1
13
8
5
4
1
1
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
LAD0
GND
FRAME
PCICLK
12
92
GND
+3VSB
1
Z97 Anniversary
한국어
93
1.2 규격
한국어
94
플랫폼
CPU
칩세트
메모리
확장 슬롯
그래픽
Z97 Anniversary
LAN
•
•
•
•
•
•
•
저장 장치
한국어
오디오
95
커넥터
OS
인증
한국어
96
Z97 Anniversary
한국어
97
한국어
기본값
Clear CMOS
98
Z97 Anniversary
PLED+
PLEDPWRBTN#
GND
한국어
99
한국어
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
100
SATA3_4
SATA3_3
SATA3_2
SATA3_1
SATA3_0
PLEDPLED+
PLED+
1
Z97 Anniversary
2
+12V
3
4
GND
1
DUMMY
한국어
FAN_SPEED_CONTROL
GND
1
2
+12V
3
4
FAN_SPEED_CONTROL
101
한국어
12
24
1
13
8
5
4
1
1
GND
GND
+3V
LAD2
LAD1
LAD3
LAD0
SMB_CLK_MAIN
GND
FRAME
PCIRST#
102
GND
+3VSB
PCICLK
1
Z97 Anniversary
日本語
103
CPU
メモリ
日本語
104
Z97 Anniversary
LAN
日本語
オーディオ
105
コネクター
BIOS 機能
•
•
•
•
OS
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit
/ 8 64-bit / 7 32-bit / 7 64-bit
認証
• FCC、CE、WHQL
• ErP/EuP Ready(ErP/EuP 対応)
(ErP/EuP 対応電源供給装
置が必要です)
日本語
ストレージ
106
•
•
•
•
•
•
•
•
•
•
Z97 Anniversary
日本語
107
日本語
デフォルト
108
Z97 Anniversary
PLED+
PLEDPWRBTN#
GND
日本語
109
SATA3_2
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
GND
IntA_PA_D-
IntA_PB_D+
IntA_PA_D+
Dummy
1
110
SATA3_4
日本語
SATA3_0
PLEDPLED+
PLED+
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
Z97 Anniversary
2
+12V
3
4
GND
1
DUMMY
日本語
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
111
日本語
12
24
1
13
8
5
4
1
1
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
GND
FRAME
PCIRST#
112
GND
LAD0
+3VSB
PCICLK
1
Z97 Anniversary
简体中文
华擎 Z97 Anniversary 主板(ATX 规格尺寸)
华擎 Z97 Anniversary 快速安装指南
华擎 Z97 Anniversary 支持光盘
2 x 串行 ATA (SATA) 数据线(选购)
1 x I/O 面板
113
1.2
CPU
• 支持第 5 代 Intel® CoreTM i7/i5/i3/Pentium®/Celeron® 处理器
(Socket 1150)
• 支持新款第 4 代和第 4 代 Intel® Xeon®/CoreTM i7/i5/i3/
Pentium®/Celeron® 处理器 (Socket 1150)
• 高性能数字供电
• 4CPU 供电设计
• 支持 Intel® Turbo Boost 2.0 技术
• 支持 Intel® K 系列不锁频 CPU
• 支持 华擎 BCLK 全范围超频
芯片集
内存
• 双通道 DDR3 内存技术
• 4 x DDR3 DIMM 槽
• 支持 DDR3 3100+(OC)/2933(OC)/2800(OC)/2400(OC)/2133
(OC)/1866(OC)/1600/1333/1066 非 ECC,非缓冲内存
• 支持系统内存容量: 32GB(见“注意”)
简体中文
平台
• 支持 Intel® Extreme Memory Proile (XMP)1.3/1.2
114
扩充槽
图形
• 只有 GPU 集成的处理器才支持 Intel® HD Graphics 内置视
效和 VGA 输出。
• 支持 Intel® HD Graphics 内置视效 : Intel® 快速同步视频,采
用 AVC、MVC (S3D) 和 MPEG-2 Full HW Encode1、Intel®
InTruTM 3D、Intel® Clear Video HD 技术、Intel® InsiderTM、
Intel® HD Graphics 4400/4600
• Pixel Shader 5.0、DirectX 11.1
• 最大共享内存 1792MB
• 支持 HDMI,最大分辨率可达 1920x1200 @ 60Hz
Z97 Anniversary
• 通过 HDMI 端口(需要兼容的 HDMI 显示器)支持 Auto
Lip Sync、Deep Color (12bpc), xvYCC 和 HBR(高位速率音
频)
• 通过 HDMI 端口支持 HDCP
• 通过 HDMI 端口支持全高清 1080p Blu-ray (BD) 播放
LAN
后面板 I/O
简体中文
音频
Gigabit LAN 10/100/1000 Mb/s
Giga PHY Intel® I218V
支持 Intel® Remote Wake(远程唤醒)技术
支持 Wake-On-LAN(网上唤醒)
支持防雷击 / 防 ESD 静电 ( 华擎全防护 )
支持高能效以太网 802.3az
支持 PXE
存储
• 6 x SATA3 6.0 Gb/s 接口,支持 RAID(RAID 0、RAID 1、
RAID 5、RAID 10、Intel Rapid Storage Technology 13 和
Intel Smart Response Technology)、NCQ、AHCI 和热插拔
115
•
•
•
•
•
•
•
•
•
•
BIOS 功能
特点
•
•
•
•
硬件监控
操作系统
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
认证
简体中文
接口
64Mb AMI UEFI Legal BIOS,支持多语言 GUI
ACPI 1.1 兼容唤醒事件
SMBIOS 2.3.1 支持
CPU、DRAM, PCH 1.05V 电压多次调整
* 有关详细产品信息,请访问我们的网站: http://www.asrock.com
116
Z97 Anniversary
简体中文
117
1.3
跳线设置
简体中文
默认
118
Z97 Anniversary
1.4
PLED+
PLEDPWRBTN#
GND
简体中文
119
SATA3_2
SATA3_1
SATA3_4
简体中文
SATA3_0
PLEDPLED+
PLED+
1
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
GND
PRESENCE#
MIC_RET
OUT_RET
1
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
120
Z97 Anniversary
简体中文
1. 高清音频支持插孔感测,但机箱上的面板连线必须支持 HDA 才能正常工作。
请按照我们的手册和机箱手册的说明安装系统。
2. 如果您使用 AC’97 音频面板,请按照以下步骤将它安装到前面板音频接脚:
A. 将 Mic_IN (MIC) 连接到 MIC2_L。
B. 将 Audio_R (RIN) 连接到 OUT2_R,将 Audio_L (LIN) 连接到 OUT2_L。
C. 将接地端 (GND) 连接到接地端 (GND)。
D. MIC_RET 和 OUT_RET 只用于高清音频面板。 您不需要针对 AC’97 音频
面板连接它们。
E. 要启用前麦克风,请转到 Realtek 控制面板上的“FrontMic”(前麦克风)
选项卡,调整 “Recording Volume”(录音音量)。
DUMMY
+12V
2
3
GND
1
4
FAN_SPEED_CONTROL
GND
1
+12V
2
3
4
FAN_SPEED
FAN_SPEED_CONTROL
121
简体中文
ATX 12V 电源接口
(8 针 ATX12V1)
(见第 1 页,第 2 个)
12
24
1
13
8
5
4
1
1
GND
GND
+3V
LAD2
LAD1
LAD3
SMB_CLK_MAIN
GND
FRAME
PCIRST#
122
GND
LAD0
+3VSB
PCICLK
1
Z97 Anniversary
简体中文
图一
有害物质或元素
铅 (Pb) 镉 (Cd) 汞 (Hg) 六价铬 (Cr(VI)) 多溴联苯 (PBB) 多溴二苯醚 (PBDE)
X
O
O
O
O
O
X
O
O
O
O
O
123
1
簡介
感謝您購買華擎 Z97 Anniversary 主機板,本主機板經華擎嚴格品管製作,是一
套讓人信賴的可靠產品。 本產品採耐用設計所展現的優異效能,完全符合華擎
對品質及耐用度的承諾。
繁體中文
由於主機板規格及 BIOS 軟體可能會更新,所以本手冊內容如有變更恕不另行通
知。 如本手冊有任何修改,可至華擎網站逕行取得更新版本,不另外通知。 若
您需要與本主機板相關的技術支援,請上我們的網站瞭解有關您使用機型的特
定資訊。 您也可以在 華擎 網站找到最新的 VGA 卡及 CPU 支援清單。 華擎網站
http://www.asrock.com
1.1
•
•
•
•
•
124
包裝內容
華擎 Z97 Anniversary 主機板(ATX 尺寸)
華擎 Z97 Anniversary 快速安裝指南
華擎 Z97 Anniversary 支援光碟
2 x Serial ATA (SATA) 資料纜線(選用)
1 x I/O 面板外罩
Z97 Anniversary
規格
平台
• ATX 尺寸
• 固態電容設計
• 高密度防潮纖維電路板
CPU
• 支援第 5 代 Intel® CoreTM i7/i5/i3/Pentium®/Celeron® 處理器
(Socket 1150)
• 支援全新第 4 代及第 4 代 Intel® Xeon®/CoreTM i7/i5/i3/
Pentium®/Celeron® 處理器 (Socket 1150)
• 數位電源設計 (Digi Power)
• 4 電源相位設計
• 支援 Intel® Turbo Boost 2.0 技術
• 支援 Intel® K-Series unlocked CPU
• 支援華擎 BCLK 全域電壓超頻
晶片組
記憶體
• 雙通道 DDR3 記憶體技術
• 4 x DDR3 DIMM 插槽
• 支援 DDR3 3100+(OC)/2933(OC)/2800(OC)/2400(OC)/2133
(OC)/1866(OC)/1600/1333/1066 非 ECC、無緩衝記憶體
• 最大系統記憶體容量: 32GB ( 請參閱「注意」)
繁體中文
1.2
• 支援 Intel® Extreme Memory Proile (XMP)1.3/1.2
擴充插槽
顯示卡
• 僅限整合 GPU 的處理器才可支援 Intel® HD Graphics Builtin Visuals 及 VGA 輸出。
• 支援 Intel® HD Graphics Built-in Visuals: 轉換 AVC、
MVC (S3D) 及 MPEG-2 Full HW Encode1 的 Intel® 高速影
像同步轉檔技術、Intel® InTruTM 3D, Intel® Clear Video HD
Technology、Intel® InsiderTM、Intel® HD Graphics 4400/4600
• Pixel Shader 5.0,DirectX 11.1
• 最大共用記憶體 1792MB
• 支援最高可達 1920x1200 @ 60Hz 解析度的 HDMI
125
• 支援使用 HDMI 連接埠(需相容於 HDMI 監視器)的
Auto Lip Sync、Deep Color (12bpc)、xvYCC 及 HBR(高位
元率音訊)
• 支援含 HDMI 連接埠的 HDCP
• 支援透過 HDMI 連接埠的 Full HD 1080p Blu-ray (BD) 播放
繁體中文
音訊
LAN
後面板 I/O
• 7.1 CH HD 音訊(Realtek ALC887 音訊轉碼器)功能
* 要啟動 7.1 聲道音效輸出,必須使用高清晰音效模組的前方
面板音源輸出接出,並透過音效軟體選擇多聲道音效功能。
• 支援防突波 ( 華擎全防護 )
• ELNA 音效專用電容
•
•
•
•
•
•
•
• 1 x PS/2 滑鼠/鍵盤連接埠
•
•
•
•
1 x HDMI 連接埠
2 x USB 2.0 連接埠(支援防 ESD 靜電 ( 華擎全防護 ))
4 x USB 3.0 連接埠(支援防 ESD 靜電 ( 華擎全防護 ))
1 x RJ-45 LAN 連接埠,含 LED(ACT/LINK LED 及 SPEED
LED)
• HD 音訊插孔: 線路輸入/前置喇叭/麥克風
儲存裝置
126
• 6 x SATA3 6.0 Gb/s 接頭可支援 RAID(RAID 0、RAID 1、
RAID 5、RAID 10、Intel 快速儲存技術 13 及 Intel 智慧反
應技術)、NCQ、AHCI 及熱插拔等
Z97 Anniversary
1 x COM 連接埠排針
1 x TPM 排針
1 x 電源 LED 排針
2 x CPU 風扇接頭 (1 x 4-pin、1 x 3-pin)
2 x 機殼風扇接頭 (2 x 4-pin)
1 x 電源風扇接頭 (3-pin)
1 x 24 pin ATX 電源接頭
1 x 8 pin 12V 電源接頭
1 x 前面板音訊接頭
2 x USB 2.0 排針(支援 4 個 USB 2.0 連接埠)(支援防
ESD 靜電 ( 華擎全防護 ))
• 1 x USB 3.0 排針(支援 2 個 USB 3.0 連接埠)(支援防
ESD 靜電 ( 華擎全防護 ))
BIOS 功能
•
•
•
•
硬體監視
器
• CPU /機殼溫度感應
• CPU /機殼/電源風扇轉速計
• CPU /機殼靜音風扇(依 CPU 溫度自動調整機殼風扇速
度)
• CPU /機殼風扇多重速度控制
• 電壓監控: +12V、+5V、+3.3V、CPU Vcore
作業系統
• Microsoft® Windows® 10 64 位元/ 8.1 32 位元/ 8.1 64 位元
/ 8 32 位元/ 8 64 位元/ 7 32 位元/ 7 64 位元
認證
• FCC、CE、WHQL
• ErP/EuP ready(須具備 ErP/EuP ready 電源供應器)
繁體中文
•
•
•
•
•
•
•
•
•
•
接頭
64Mb AMI UEFI Legal BIOS 含多語 GUI 支援
ACPI 1.1 符合喚醒自動開機
支援 SMBIOS 2.3.1
CPU、DRAM、PCH 1.05V 電壓多重調整
* 如需產品詳細資訊,請上我們的網站: http://www.asrock.com
127
請務必理解,超頻可能產生某種程度的風險,其中包括調整 BIOS 中的設定、採
用自由超頻技術或使用協力廠商的超頻工具。 超頻可能會影響您系統的穩定性,
或者甚至會對您系統的元件及裝置造成傷害。 您應自行負擔超頻風險及成本。
我們對於因超頻所造成的可能損害概不負責。
繁體中文
在 Windows® 32 位元作業系統下,因有保留供系統使用記憶體的限制,所以實
際記憶體大小可能低於 4GB。 Windows® 64 位元作業系統則沒有此類限制。 您
可使用華擎 XFast RAM 運用 Windows® 無法使用的記憶體。
128
Z97 Anniversary
1.3
跳線設定
繁體中文
圖例顯示設定跳線的方式。 當跳線帽套在針腳上時,該跳線為「短路」。 若
沒有跳線帽套在針腳上,該跳線為「開啟」。 圖例顯示當 3-pin 跳線的跳線蓋
套在 pin1 及 pin2 時,這兩個針腳皆為「短路」。
清除 CMOS 跳線
(CLRCMOS1)
(請參閱第 1 頁,編號
21)
預設
您可利用 CLRCMOS1 清除 CMOS 中的資料。 若要清除及重設系統參數為預
設設定,請先關閉電腦電源,再拔下電源供應器的電源線。 在等待 15 秒後,
請使用跳線帽讓 CLRCMOS1 上的 pin2 及 pin3 短路約 5 秒。 不過,請不要在
更新 BIOS 後立即清除 CMOS。 若您需在更新 BIOS 後立即清除 CMOS,則必
須先重新啟動系統,然後於進行清除 CMOS 動作前關機。 請注意,只有在取
出 CMOS 電池時才會清除密碼、日期、時間及使用者預設設定檔。
129
1.4
板載排針及接頭
板載排針及接頭都不是跳線。 請勿將跳線帽套在這些排針及接頭上。 將跳線帽
套在排針及接頭上,將造成主機板永久性的受損。
繁體中文
系統面板排針
(9-pin PANEL1)
(請參閱第 1 頁, 編號 15)
PLED+
PLEDPWRBTN#
GND
請依照以下的針腳排
列將機殼上的電源開
關、重設開關及系統
狀態指示燈連接至此
排針。 在連接纜線之
前請注意正負針腳。
PWRBTN ( 電源開關 ):
連接至機殼前面板上的電源開關。 您可設定使用電源開關關閉系統電源的方式。
RESET ( 重設開關 ):
連接至機殼前面板上的重設開關。 若電腦凍結且無法執行正常重新啟動,按下
重設開關即可重新啟動電腦。
PLED ( 系統電源 LED):
連接至機殼前面板上的電源狀態指示燈。 系統正在運作時,此 LED 會亮起。 系
統進入 S1/S3 睡眠狀態時,LED 會持續閃爍。 系統進入 S4 睡眠狀態或關機 (S5)
時,LED 會熄滅。
HDLED ( 硬碟活動 LED):
連接至機殼前面板上的硬碟活動 LED。 硬碟正在讀取或寫入資料時,LED 會亮
起。
各機殼的前面板設計各有不同。 前面板模組主要是由電源開關、重設開關、電
源 LED、硬碟活動 LED、喇叭及其他裝置組成。將機殼前面板模組連接至此排
針時,請確定佈線及針腳指派皆正確相符。
130
Z97 Anniversary
USB 3.0 排針
(19-pin USB3_4_5)
(請參閱第 1 頁,編號 6)
Vbus
Vbus
IntA_PB_SSRX-
IntA_PA_SSRX-
IntA_PB_SSRX+
GND
IntA_PA_SSRX+
GND
IntA_PB_SSTX-
IntA_PA_SSTX-
IntA_PB_SSTX+
IntA_PA_SSTX+
IntA_PB_D+
IntA_PA_D+
Dummy
1
前面板音訊排針
(9-pin HD_AUDIO1)
(請參閱第 1 頁,編號 23)
這六組 SATA3 接頭皆
支援內部儲存裝置的
SATA 資料纜線,最
高可達 6.0 Gb/s 資料
傳輸率。
SATA3_4
SATA3_3
SATA3_2
SATA3_1
SATA3_0
PLEDPLED+
PLED+
Serial ATA3 接頭
(SATA3_0:
請參閱第 1 頁,編號 9)
(SATA3_1:
請參閱第 1 頁,編號 8)
(SATA3_2:
請參閱第 1 頁,編號 11)
(SATA3_3:
請參閱第 1 頁,編號 10)
(SATA3_4:
請參閱第 1 頁,編號 13)
(SATA3_5:
請參閱第 1 頁,編號 12)
USB 2.0 排針
(9-pin USB2_3)
(請參閱第 1 頁,編號 17)
(9-pin USB4_5)
(請參閱第 1 頁,編號 18)
請將機殼電源 LED 連
接至此排針,以 指示
系統的電源狀態。
1
繁體中文
電源 LED 排針
(3-pin PLED1)
(請參閱第 1 頁,編號 16)
GND
PRESENCE#
MIC_RET
OUT_RET
1
除了 I/O 面板上的兩
個 USB 2.0 連接埠外,
在本主機板上還有另
外兩組排針。 各 USB
2.0 排針皆可支援兩個
連接埠。
除了 I/O 面板上的四
個 USB 3.0 連接埠外,
在本主機板上還有另
外一組排針。 各 USB
3.0 排針皆可支援兩個
連接埠。
本排針適用於連接音
訊裝置至前面板音
訊。
OUT2_L
J_SENSE
OUT2_R
MIC2_R
MIC2_L
131
繁體中文
1. 高解析度音訊支援智慧型音效介面偵測 (Jack Sensing),但機殼上的面板線必須
支援 HDA 才能正確運作。 請依本手冊及機殼手冊說明安裝系統。
2. 若您使用 AC’97 音訊面板,請按照以下步驟安裝至前面板音訊排針:
A. 將 Mic_IN (MIC) 連接至 MIC2_L。
B. 將 Audio_R (RIN) 連接至 OUT2_R 且將 Audio_L (LIN) 連接至 OUT2_L。
C. 將接地 (GND) 連接至接地 (GND)。
D. MIC_RET 及 OUT_RET 僅供 HD 音訊面板使用。 您不需要在 AC’97 音訊
面板上連接。
E. 若要啟動前側麥克風,請前往 Realtek 控制面板中的「FrontMic」標籤調整
「錄音音量」。
機殼喇叭排針
(4-pin SPEAKER1)
(請參閱第 1 頁, 編號 20)
機殼及電源風扇接頭
(4-pin CHA_FAN1)
(請參閱第 1 頁, 編號 14)
DUMMY
4
(3-pin CPU_FAN2)
(請參閱第 1 頁, 編號 25)
132
FAN_SPEED
FAN_SPEED_CONTROL
(3-pin PWR_FAN1)
(請參閱第 1 頁, 編號 1)
CPU 風扇接頭
(4-pin CPU_FAN1)
(請參閱第 1 頁, 編號 24)
+12V
2
3
請將風扇纜線連接至
風扇接頭,並比對黑
線及接地針腳。
GND
1
(4-pin CHA_FAN2)
(請參閱第 1 頁, 編號 7)
請將機殼喇叭連接至
此排針。
GND
1
2
+12V
3
4
FAN_SPEED_CONTROL
本主機板配備 4-Pin
CPU 風扇 ( 靜音風扇 )
接頭。 若您計畫連接
3-Pin CPU 風扇,請
接至 Pin 1-3。
Z97 Anniversary
ATX 12V 電源接頭
(8-pin ATX12V1)
(請參閱第 1 頁,編號 2)
序列連接埠排針
(9-pin COM1)
(請參閱第 1 頁,編號 22)
12
24
1
13
本主機板配備一組
24-pin ATX 電源接
頭。 若要使用 20-pin
ATX 電源供應器,請
插入 Pin 1 及 Pin 13。
8
5
4
1
本主機板配備一組
8-pin ATX 12V 電源接
頭。 若要使用 4-pin
ATX 電源供應器,請
插入 Pin 1 及 Pin 5。
繁體中文
ATX 電源接頭
(24-pin ATXPWR1)
(請參閱第 1 頁,編號 5)
此 COM1 排針支援序
列連接埠模組。
1
GND
GND
LAD2
LAD0
SMB_CLK_MAIN
LAD3
GND
FRAME
TPM 標頭
(17-pin TPMS1)
(請參閱第 1 頁,編號 19)
PCICLK
GND
+3VSB
1
此接頭支援信賴平台
模組 (TPM) 系統,可
確保儲存金鑰、數位
憑證、密碼及資料的
安全。 TPM 系統也
能強化網路安全、保
護數位身分並確定平
台完整性。
133
Spesiikasi
Platform
• Bentuk dan Ukuran ATX
• Desain Kapasitor Solid
Bahasa Indonesia
• PCB Serat Kaca dengan Kerapatan Tinggi
CPU
TM
• Mendukung Prosesor Intel® Core i7/i5/i3/Pentium®/Celeron®
Generasi ke-5 (Soket 1150)
TM
• Mendukung Prosesor Intel® Xeon®/Core i7/i5/i3/Pentium®/
Celeron® Generasi ke-4 Baru, dan ke-4 (Soket 1150)
• Desain Digi Power
• Desain 4 Fase Daya
• Mendukung Teknologi Intel® Turbo Boost 2.0
• Mendukung CPU Intel® K-Series tidak terkunci
• Mendukung Overclock Jarak penuh ASRock BCLK
Chipset
• Teknologi Memori DDR3 Kanal Ganda
• 4 x Slot DDR3 DIMM
• Mendukung DDR3 3100+(OC)/2933(OC)/2800(OC)/2400(O
C)/2133(OC)/1866(OC)/1600/1333/1066 non-ECC, memori
tanpa bufer
• Kapasitas maksimum memori sistem: 32GB (lihat
PERHATIAN)
• Mendukung Intel® Extreme Memory Proile (XMP)1.3/1.2
Slot Ekspansi
Grais
• Intel® HD Graphics Built-in Visuals dan output VGA hanya
didukung dengan prosesor yang terintegrasi GPU.
• Mendukung Intel® HD Graphics Built-in Visuals: Intel® Quick
Sync Video dengan AVC, MVC (S3D), dan MPEG-2 Full HW
Encode1, Intel® InTruTM 3D, Teknologi Intel® Clear Video HD,
Intel® InsiderTM, Intel® HD Graphics 4400/4600
• Pixel Shader 5.0, DirectX 11.1
134
Z97 Anniversary
Bahasa Indonesia
• Memori bersama maksimum 1792MB
• Mendukung HDMI dengan resolusi maksimum hingga
1920x1200 @ 60Hz
• Mendukung Lip Sync Otomatis, Kedalaman Warna (12bpc),
xvYCC, dan HBR (High Bit Rate Audio) dengan Port HDMI
(memerlukan monitor HDMI yang kompatibel)
• Mendukung HDCP dengan port HDMI
• Mendukung pemutaran 1080p Blu-ray HD Penuh (BD) dengan
Port HDMI
Audio
• Audio HD 7.1 CH (Realtek ALC887 Audio Codec)
* Untuk mengkoni gurasi audio 7.1 CH, gunakan modul
audio panel depan HD lalu aktikan i tur multikanal melalui
driver audio.
• Mendukung Perlindungan Lonjakan Arus (ASRock Full Spike
Protection)
• ELNA Audio Caps.
LAN
• Gigabit LAN 10/100/1000 Mb/s
• Giga PHY Intel® I218V
• Mendukung Teknologi Intel® Remote Wake
• Mendukung Wake-On-LAN
• Mendukung Perlindungan Petir/ESD (ASRock Full Spike Protection)
• Mendukung Energy Eicient Ethernet 802.3az
• Mendukung PXE
Panel I/O
Belakang
• 1 x Port Mouse/Keyboard PS/2
• 1 x Port HDMI
• 2 x Port USB 2.0 (Mendukung Perlindungan ESD (ASRock Full
Spike Protection))
• 4 x Port USB 3.0 (Mendukung Perlindungan ESD (ASRock Full
Spike Protection))
• 1 x Port LAN RJ-45 dengan LED (ACT/LINK LED dan SPEED
LED)
• Soket Audio HD: Saluran masuk/Speaker Depan/Mikrofon
135
Bahasa Indonesia
Penyimpanan
• 6 x Konektor SATA3 6,0 Gb/s, mendukung RAID (RAID 0, RAID
1, RAID 5, RAID 10, Intel Rapid Storage Technology 13, dan Intel
Smart Response Technology), NCQ, AHCI, dan Hot Plug.
Konektor
• 1 x Header Port COM
• 1 x TPM Header
• 1 x Header LED Daya
• 2 x Konektor Kipas CPU (1 x 4-pin, 1 x 3-pin)
• 2 x Konektor Kipas Chassis (2 x 4-pin)
• 1 x Konektor Kipas Daya (3-pin)
• 1 x Konektor Daya ATX 24 pin
• 1 x Konektor Daya 8 pin 12V
• 1 x Konektor Audio Panel Depan
• 2 x USB 2.0 Headers (Mendukung 4 port USB 2.0) (Mendukung
Perlindungan ESD (ASRock Full Spike Protection))
• 1 x Header USB 3.0 (Mendukung 2 port USB 3.0) (Mendukung
Perlindungan ESD (ASRock Full Spike Protection))
Fitur BIOS
• 64Mb AMI UEFI Legal BIOS dengan dukungan GUI multibahasa
• ACPI 1.1 Kompatibel dengan aktivitas pengaktifan
• Mendukung SMBIOS 2.3.1
• Multipengatur Tegangan CPU, DRAM, PCH 1,05V
Monitor
Perangkat
Keras
• Sensor suhu CPU/Chassis
• Takometer CPU/Chassis/Kipas Daya
• Kipas Hening CPU/Chassis (Penyesuaian otomatis kecepatan
kipas berdasarkan suhu CPU)
• Kontrol multikecepatan Kipas CPU/Chassis
• Pemantauan tegangan: +12V, +5V, +3,3V, CPU Vcore
136
OS
• Microsot® Windows® 10 64-bit / 8.1 32-bit / 8.1 64-bit / 8 32-bit /
8 64-bit / 7 32-bit / 7 64-bit
Sertiikasi
• FCC, CE, WHQL
• ErP/EuP ready (memerlukan catu daya yang kompatibel dengan ErP/EuP)
Z97 Anniversary
* Untuk informasi tentang produk rinci, kunjungi situs web kami: http://www.asrock.com
Bahasa Indonesia
Perlu diketahui, overclocking memiliki risiko tertentu, termasuk menyesuaikan pengaturan pada BIOS, menerapkan Teknologi Untied Overclocking, atau menggunakan
alat overclocking pihak ketiga. Overclocking dapat mempengaruhi stabilitas sistem, atau
bahkan dapat mengakibatkan kerusakan komponen dan perangkat sistem. Risiko dan
biaya apapun menjadi tanggungan Anda. Kami tidak bertanggung jawab atas kemungkinan kerusakan karena overclocking.
Karena keterbatasan, ukuran memori sebenarnya mungkin kurang dari 4GB karena
akan digunakan sistem berdasarkan sistem operasi Windows® 32-bit. Sistem operasi
Windows® 64-bit tidak memiliki keterbatasan tersebut. Anda dapat menggunakan ASRock XFast RAM untuk memanfaatkan memori yang tidak dapat digunakan Windows®
tersebut.
137
Contact Information
If you need to contact ASRock or want to know more about ASRock, you’re welcome
to visit ASRock’s website at http://www.asrock.com; or you may contact your dealer
for further information. For technical questions, please submit a support request
form at http://www.asrock.com/support/tsd.asp
ASRock Incorporation
2F., No.37, Sec. 2, Jhongyang S. Rd., Beitou District,
Taipei City 112, Taiwan (R.O.C.)
ASRock EUROPE B.V.
Bijsterhuizen 3151
6604 LV Wijchen
he Netherlands
Phone: +31-24-345-44-33
Fax: +31-24-345-44-38
ASRock America, Inc.
13848 Magnolia Ave, Chino, CA91710
U.S.A.
Phone: +1-909-590-8308
Fax: +1-909-590-1026
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement

Languages

Only pages of the document in English were displayed