Alliance NTGX19*N4067 Programming Manual

Welcome to the ALLIANCE NTGX19N4067 washer! This workhorse has a variety of features to make your laundry day easier. With its heavy-duty construction and powerful motor, the ALLIANCE NTGX19N4067 can handle even the dirtiest clothes. Its large-capacity drum can easily accommodate bulky items like blankets and comforters. The ALLIANCE NTGX19N4067 also features a variety of cycles to choose from, so you can customize your wash to suit your needs. And thanks to its user-friendly controls, operating the ALLIANCE NTGX19N4067 is a breeze.

Programming
MDC
Frontload Washers
Refer to Page 4 for Model Numbers
FLW8R
FLW8R
Part No. 801293R10
March 2010
Keep These Instructions for Future Reference.
(If this machine changes ownership, this manual must accompany machine.)

801293 1© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
NOTE: The WARNING and IMPORTANT
instructions appearing in this manual are not meant
to cover all possible conditions and situations that
may occur. It must be understood that common
sense, caution, and carefulness are factors which
cannot be built into these washers. These factors
MUST BE supplied by the person(s) installing,
maintaining, or operating the washer.
Always contact the distributor, service agent, or the
manufacturer about any problems or conditions you do
not understand.
Failure to install, maintain, and/or operate
this machine according to the
manufacturer's instructions may result in
conditions which can produce bodily injury
and/or property damage. W030
WARNING

© Published by permission of the copyright owner.
All rights reserved. No part of the contents of this book may be reproduced or transmitted in any form or by any
means without the expressed written consent of the publisher.
2 801293© Published by permission of the copyright owner – DO NOT COPY or TRANSMIT
Table of
Contents
Model Identification ........................................................................... 4
Preliminary Information.................................................................... 5
About the Control ................................................................................. 5
Glossary of Terms................................................................................. 5
Power Failure Recovery ....................................................................... 5
MDC Identification............................................................................. 6
SELECT CYCLE Keypads................................................................... 6
PREWASH Keypad.............................................................................. 6
START Keypad .................................................................................... 6
Display Identification ......................................................................... 8
Light Emitting Diodes (LEDs) ............................................................. 8
START LED......................................................................................... 8
WASH LED.......................................................................................... 8
RINSE LED .......................................................................................... 8
SPIN LED............................................................................................. 8
DOOR LOCKED LED ......................................................................... 8
Four 7-Segment Digits.......................................................................... 8
Washer Operation .............................................................................. 9
Start Up................................................................................................. 9
Ready Mode.......................................................................................... 9
OPL/Free Vend Mode........................................................................... 9
Closing Washer Door ........................................................................... 9
Signals................................................................................................... 9
MDC Special Features........................................................................ 10
Programming MDC .............................................................................. 10
Collecting Audit Information ............................................................... 10
Testing Machine and MDC Functions.................................................. 10
Rapid Advance Feature......................................................................... 10
Coin Drop ............................................................................................. 10
Start Pulse Operation ............................................................................ 10
Service Door and Coin Vault Openings ............................................... 10
Opening the Service Door .................................................................. 11
Washers Prepped for Central Pay System ....................................... 11
Entering the Manual Mode................................................................ 12
How to Enter the Manual Mode ........................................................... 12
Programming MDC............................................................................ 13
What Can Be Programmed? ................................................................. 13
Programmable Options Available......................................................... 13
1. Vend Price “-001”........................................................................ 14
2. Coin #1 Value “-002” .................................................................. 15
3. Coin #2 Value “-003” .................................................................. 16
4. Start Pulse Value “-004” .............................................................. 17
5. NORMAL 90 Prewash Fill/Agitate Time “-005” ........................ 18
6. NORMAL 90 Wash Fill/Agitate Time “-006” ............................ 19
7. NORMAL 90 Rinse Fill/Agitate Time “-007” ............................ 20
8. NORMAL 90 Extra Rinse Fill/Agitate Time “-008”................... 21
9. NORMAL 90 Final Rinse Fill/Agitate Time “-009” ................... 22
10. NORMAL 60 Prewash Fill/Agitate Time “-010” ...................... 23
11. NORMAL 60 Wash Fill/Agitate Time “-011” .......................... 24
12. NORMAL 60 Rinse Fill/Agitate Time “-012” .......................... 25
13. NORMAL 60 Extra Rinse Fill/Agitate Time “-013”................. 26