Thunderbay Y43 Operation Manual
Thunderbay Y43 is a powerful earth auger that combines ease of use with advanced safety features to help you tackle tough jobs efficiently. With its heavy-duty construction and reliable performance, the Y43 is ideal for a wide range of drilling applications, including planting trees and shrubs, installing fences, and more. It features a 3-speed transmission that provides optimal torque and speed control for various soil conditions. The Y43 also boasts an innovative Flex Coil Shock Top that absorbs vibrations and reduces operator fatigue during extended use.
advertisement
COMPLETE YOUR PURCHASE BY EITHER
REGISTERING ON LINE AT
WWW.THUNDERBAYPRODUCTS.COM OR BY
FILLING OUT YOUR WARRANTY CARD AND
MAILING IT IN.
EARTH AUGER OPERATIONS
MANUAL
REGISTERING ON LINE AT
WWW.THUNDERBAYPRODUCTS.COM OR BY
FILLING OUT YOUR WARRANTY CARD AND
MAILING IT IN.
EARTH AUGER OPERATIONS
MANUAL
INTRODUCTION AND COTENTS
Y43 Model
CONGRATULATIONS…
on purchasing your new THUNDERBAY EARTH AUGER POWERHEAD. We know that
you are anxious to get right to work, but before you do, it is important that you take a few
moments and familiarize yourself with your new Powerhead and its operating instructions.
Please read your owner’s manual and take time to save time. We have worked hard to
ensure that your new Powerhead will be one of the most trouble-free and satisfying pieces of
equipment you have ever owned. With proper care, your powerhead will provide many years
of service. Please take the time to register your new purchase as well as read this manual
carefully to learn how to correctly operate and maintain your equipment.
PLEASE TAKE THE NEXT STEP TO REGISTER YOUR PURCHASE BY COMPLETING THE
ENCLOSED WARRANTY CARD AND MAILING THE CARD TO THE FOLLOWING
ADDRESS:
THUNDERBAY PRODUCTS
104 YEAGER COURT
HUNTSVILLE, AL 35806
OR
BY GOING TO WWW.THUNDERBAYPROCUCTS.COM WEBSITE AND FINDING THE WARRANTY ICON.
CLICK ON THE WARRANTY ICON TO REGISTER YOUR PURCHASE.
CONTENTS
Introduction & Registration ……………………………………………………………………………………………2
Safety………………………………………………………………………………………………………………..…..3-4
Operation...........................................................................................................................................................5-8
Maintenance &Storage .....................................................................................................................................8-9
Troubleshooting ...............................................................................................................................................10-11
Parts Diagrams & Parts Lists....................................................................................,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,12-17
INTRODUCTION
OWNER’S RESPONSIBILITY
CORRECT AND ACCURATE ASSEMBLY AND SAFE AND EFFECTIVE USE OF THE POWERHEAD IS THE
OWNER’S RESPONSIBILITY!
•READ AND FOLLOW ALL SAFETY INSTRUCTIONS
•CAREFULLY FOLLOW ALL ASSEMBLY INSTRUCTIONS
•MAINTAIN POWERHEAD ACCORDING TO DIRECTIONS AND SCHEDULE IN YOUR OPERATOR’S MANUAL
•ENSURE THAT ANYONE WHO USES THE POWERHEAD IS FAMILIAR WITH ALL CONTROLS AND SAFETY
PRECAUTIONS
2
Y43 Model
CONGRATULATIONS…
on purchasing your new THUNDERBAY EARTH AUGER POWERHEAD. We know that
you are anxious to get right to work, but before you do, it is important that you take a few
moments and familiarize yourself with your new Powerhead and its operating instructions.
Please read your owner’s manual and take time to save time. We have worked hard to
ensure that your new Powerhead will be one of the most trouble-free and satisfying pieces of
equipment you have ever owned. With proper care, your powerhead will provide many years
of service. Please take the time to register your new purchase as well as read this manual
carefully to learn how to correctly operate and maintain your equipment.
PLEASE TAKE THE NEXT STEP TO REGISTER YOUR PURCHASE BY COMPLETING THE
ENCLOSED WARRANTY CARD AND MAILING THE CARD TO THE FOLLOWING
ADDRESS:
THUNDERBAY PRODUCTS
104 YEAGER COURT
HUNTSVILLE, AL 35806
OR
BY GOING TO WWW.THUNDERBAYPROCUCTS.COM WEBSITE AND FINDING THE WARRANTY ICON.
CLICK ON THE WARRANTY ICON TO REGISTER YOUR PURCHASE.
CONTENTS
Introduction & Registration ……………………………………………………………………………………………2
Safety………………………………………………………………………………………………………………..…..3-4
Operation...........................................................................................................................................................5-8
Maintenance &Storage .....................................................................................................................................8-9
Troubleshooting ...............................................................................................................................................10-11
Parts Diagrams & Parts Lists....................................................................................,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,12-17
INTRODUCTION
OWNER’S RESPONSIBILITY
CORRECT AND ACCURATE ASSEMBLY AND SAFE AND EFFECTIVE USE OF THE POWERHEAD IS THE
OWNER’S RESPONSIBILITY!
•READ AND FOLLOW ALL SAFETY INSTRUCTIONS
•CAREFULLY FOLLOW ALL ASSEMBLY INSTRUCTIONS
•MAINTAIN POWERHEAD ACCORDING TO DIRECTIONS AND SCHEDULE IN YOUR OPERATOR’S MANUAL
•ENSURE THAT ANYONE WHO USES THE POWERHEAD IS FAMILIAR WITH ALL CONTROLS AND SAFETY
PRECAUTIONS
2
AUGER SAFETY AND WARNING PRECAUTIONS
Y43 Model
3
WARNING
WARNING SIGIFIES A DANGER WHERE
YOU COULD BE SEROIUSLY INJURIED
OR HAVE AN ACCIDENT THAT COULD
RESULT IN DEATH, IF NOT AVOIDED.
CAUTION
CAUTION SIGNALS YOU CAN BE HURT OR THE
EQUIPMENT SERIOUSLY DAMAGED, IF THE
SAFETY INSTRUCTIONS THAT FOLLOW THIS
SIGNAL WORD ARE NOT OBEYED
IMPORTANT
IMPORTANT MEANS “READ THIS”! HELPFUL
INFORMATION FOR CORRECT OPERATION,
ASSEMBLY AND MAINTENANCE OF THE
EQUIPMENT IS LISTED HERE.
CALIF WARNING
CALIFORNIA PROPOSITION 65 STATES ENGINE
EXHAUST FROM THIS PRODUCT CONTAINS
CHEMICALS KNOWN TO CAUSE CANCER, BIRTH
DEFECTS, OR OTHER REPRODUCTIVE HARM.
SAFETY
OWNER’S RESPONSIBILITY
It is the owner’s responsibility for accurate assembly and
safe, effective use of the auger.
• Read and follow all safety instructions.
• Carefully follow all assembly instructions.
• Maintain the auger according to directions and
schedule included in this operator’s manual.
• Ensure that anyone who uses the auger is familiar with
all controls and safety precautions.
SPECIAL MESSAGES
Throughout your manual you will find special messages to
help bring potential safety concerns to your attention.
Please read the entire manual carefully to help avoid
injury and machine damage. Your manual is meant to be
a helpful tool in preventing machine damage and personal
injury. It also provides helpful operating tips and service
information.
NOTE: Throughout the Manual, you will find general
information that may help you in the operation and service
of the powerhead
VITAL SAFETY PRECAUTIONS
Please read this section carefully. Operate the auger
according to the safety instructions and recommendations
outlined here and inserted throughout the text. Anyone who
uses this auger must read the instructions and be familiar
with the controls.
This symbol points out important safety
instructions which if not followed could
endanger your personal safety. Read and
follow all instructions in this manual before
attempting to operate this equipment.
Never carry running powerhead between holes.
When engine is idling, the auger should not rotate. If it
does, contact the service center for information.
Always keep hands, feet, hair and any loose clothing away
from any moving parts on engine and auger at all times.
Always wear a protective hearing device.
Never allow children to operate power auger. Do not allow
adults to operate auger without proper instruction.
Do not operate auger under influence of alcohol or drugs.
Keep all screws, nuts and bolts tight.
Engine should be turned off & allowed to cool. Spark plug
wire must be removed from spark plug before any repairs.
Muffler Temperature and nearby areas may exceed 150° F
(65° C). Avoid these areas.
Never run engine indoors or in an enclosed area. Engine
exhaust contains carbon monoxide, an odorless and
deadly gas.
If the earth auger will not turn in the hole, turn engine off
and allow it to cool before attempting to remove it.
Use only original equipment parts from factory including all
nuts and bolts.
TAKE NOTE OF ALL WARNING LABELS
ATTACHED TO AUGER UNIT. IT IS
IMPORTANT TO REALL ALL SAFETY
PRECAUTIONS AND LOCATE ALL
WARNING LABELS BEFORE
OPERATING THIS PRODUCT.
Y43 Model
3
WARNING
WARNING SIGIFIES A DANGER WHERE
YOU COULD BE SEROIUSLY INJURIED
OR HAVE AN ACCIDENT THAT COULD
RESULT IN DEATH, IF NOT AVOIDED.
CAUTION
CAUTION SIGNALS YOU CAN BE HURT OR THE
EQUIPMENT SERIOUSLY DAMAGED, IF THE
SAFETY INSTRUCTIONS THAT FOLLOW THIS
SIGNAL WORD ARE NOT OBEYED
IMPORTANT
IMPORTANT MEANS “READ THIS”! HELPFUL
INFORMATION FOR CORRECT OPERATION,
ASSEMBLY AND MAINTENANCE OF THE
EQUIPMENT IS LISTED HERE.
CALIF WARNING
CALIFORNIA PROPOSITION 65 STATES ENGINE
EXHAUST FROM THIS PRODUCT CONTAINS
CHEMICALS KNOWN TO CAUSE CANCER, BIRTH
DEFECTS, OR OTHER REPRODUCTIVE HARM.
SAFETY
OWNER’S RESPONSIBILITY
It is the owner’s responsibility for accurate assembly and
safe, effective use of the auger.
• Read and follow all safety instructions.
• Carefully follow all assembly instructions.
• Maintain the auger according to directions and
schedule included in this operator’s manual.
• Ensure that anyone who uses the auger is familiar with
all controls and safety precautions.
SPECIAL MESSAGES
Throughout your manual you will find special messages to
help bring potential safety concerns to your attention.
Please read the entire manual carefully to help avoid
injury and machine damage. Your manual is meant to be
a helpful tool in preventing machine damage and personal
injury. It also provides helpful operating tips and service
information.
NOTE: Throughout the Manual, you will find general
information that may help you in the operation and service
of the powerhead
VITAL SAFETY PRECAUTIONS
Please read this section carefully. Operate the auger
according to the safety instructions and recommendations
outlined here and inserted throughout the text. Anyone who
uses this auger must read the instructions and be familiar
with the controls.
This symbol points out important safety
instructions which if not followed could
endanger your personal safety. Read and
follow all instructions in this manual before
attempting to operate this equipment.
Never carry running powerhead between holes.
When engine is idling, the auger should not rotate. If it
does, contact the service center for information.
Always keep hands, feet, hair and any loose clothing away
from any moving parts on engine and auger at all times.
Always wear a protective hearing device.
Never allow children to operate power auger. Do not allow
adults to operate auger without proper instruction.
Do not operate auger under influence of alcohol or drugs.
Keep all screws, nuts and bolts tight.
Engine should be turned off & allowed to cool. Spark plug
wire must be removed from spark plug before any repairs.
Muffler Temperature and nearby areas may exceed 150° F
(65° C). Avoid these areas.
Never run engine indoors or in an enclosed area. Engine
exhaust contains carbon monoxide, an odorless and
deadly gas.
If the earth auger will not turn in the hole, turn engine off
and allow it to cool before attempting to remove it.
Use only original equipment parts from factory including all
nuts and bolts.
TAKE NOTE OF ALL WARNING LABELS
ATTACHED TO AUGER UNIT. IT IS
IMPORTANT TO REALL ALL SAFETY
PRECAUTIONS AND LOCATE ALL
WARNING LABELS BEFORE
OPERATING THIS PRODUCT.
ENGINE SAFETY PRECAUTIONS
Y43 Model
4
WARNING CARBON MONOXIDE POISONING
Fuel driven engines contain carbon monoxide in their
exhaust. Even if you do not see or smell carbon
monoxide; the deadly, colorless, tasteless, odorless gas
may be present in the exhaust. Any enclosed areas of
poor ventilation can potentially house deadly levels of
carbon monoxide for days. If inhaled, any level of
carbon monoxide can cause headaches, drowsiness,
nausea, dizziness, confusion and eventually death. If
you experience any of these symptoms, seek fresh
air and medical attention immediately.
PREVENTING CARBON MONOXIDE POISONING
Never run the engine indoors.
Carbon monoxide can reach dangerous levels very
quickly. Never try to ventilate engine exhaust
indoors.
Never run engine outdoors where exhaust fumes
may be pulled into a building.
Exhaust fumes are trapped easily and may not
disperse. Never run engine outdoors in a poorly
ventilated area (Examples include: hilly terrain,
thickets or a large hole you are working in.)
Never run engine in an enclosed or partially enclosed
area such as: tents, open garages, car ports,
buildings that are enclosed on one or more sides, or
basements.
Always point the exhaust and muffler away from the
operator.
Never point the exhaust muffler towards anyone.
People should always be many feet away from the
operation of the engine and its attachments.
CAUTION
HOT GASES ARE A NORMAL BY-PRODUCT OF A
FUNCTIONING CATALYTIC CONVERTER. FOLLOW
ALL SAFETY INSTRUCTIONS TO PREVENT BURNS
AND FIRES.
GASOLINE FIRES AND HANDLING FUEL SAFELY
Fuels and their vapors are flammable and highly volatile!
Fuel fires can spread quickly and even can be explosive!
Never use fuel when a spark or flame may be present.
Never use fuel where a potential source of ignition could
occur. (Examples include: hot water heaters or space
heaters, clothes dryer, electric motors, etc). Keep flames
and sparks away from engine and fuel at all times to
prevent fires.
PREVENTION OF GASOLINE FIRES
Never fill your fuel tank with fuel inside a building
including a basement, garage, barn, shed, house,
porch, etc.
Always fill fuel tank outside in a well ventilated area.
Stop any engine and allow cooling before refilling tank.
Never remove the fuel cap or add fuel while the engine
is running.
Never drain fuel from engine in an enclosed area.
Always wipe up excess (spilled) fuel from engine before
starting. Clean up spilled fuel immediately.
Allow spilled fuel to dry, after wiping and before starting
Always allow fuel fumes/vapors to escape from the area
before starting engine.
Test the fuel cap for proper installation and tightness
before starting and using engine.
Always run the engine with fuel cap properly installed on
the engine and gas cap vent screw unscrewed.
Replace any fuel cap that allows gas to spill or leak.
Never smoke near any fumes/vapor or while refilling
engine fuel tank.
Do not store unit with fuel in the fuel tank in a confined
space. Fuel and fuel vapors are highly explosive.
Always check that gas cap vent screw is tightly secured.
Never pour fuel from engine fuel tank.
Never siphon fuel by mouth to drain fuel tank.
Always have an adult fill the fuel tank.
Never allow an adult or anyone under the influence of
drugs or alcohol to fill engine.
Never allow children to fill the engine or operate this
unit.
PREVENTION OF BURNS AND FIRES
Never remove the muffler guard from the engine.
Never touch the muffler guard because it is extremely
hot and will cause severe burns.
Never touch parts of the engine that become hot after
operation.
Always keep materials and debris away from muffler
guard and other hot parts of the engine to avoid fires.
This engine is designed to operate using a catalytic
converter which contributes to the engine’s compliance
with the EPA.
CAUTION
TAKE GREAT CAUTION WITH MUFFLER, MUFFLER
GUARD & OTHER PARTS OF ENGINE AS THEY
BECOME EXTREMELY HOT DURING OPERATION.
THESE PARTS REMAIN EXTREMELY HOT EVEN
AFTER ENGINE HAS STOPPED.
Y43 Model
4
WARNING CARBON MONOXIDE POISONING
Fuel driven engines contain carbon monoxide in their
exhaust. Even if you do not see or smell carbon
monoxide; the deadly, colorless, tasteless, odorless gas
may be present in the exhaust. Any enclosed areas of
poor ventilation can potentially house deadly levels of
carbon monoxide for days. If inhaled, any level of
carbon monoxide can cause headaches, drowsiness,
nausea, dizziness, confusion and eventually death. If
you experience any of these symptoms, seek fresh
air and medical attention immediately.
PREVENTING CARBON MONOXIDE POISONING
Never run the engine indoors.
Carbon monoxide can reach dangerous levels very
quickly. Never try to ventilate engine exhaust
indoors.
Never run engine outdoors where exhaust fumes
may be pulled into a building.
Exhaust fumes are trapped easily and may not
disperse. Never run engine outdoors in a poorly
ventilated area (Examples include: hilly terrain,
thickets or a large hole you are working in.)
Never run engine in an enclosed or partially enclosed
area such as: tents, open garages, car ports,
buildings that are enclosed on one or more sides, or
basements.
Always point the exhaust and muffler away from the
operator.
Never point the exhaust muffler towards anyone.
People should always be many feet away from the
operation of the engine and its attachments.
CAUTION
HOT GASES ARE A NORMAL BY-PRODUCT OF A
FUNCTIONING CATALYTIC CONVERTER. FOLLOW
ALL SAFETY INSTRUCTIONS TO PREVENT BURNS
AND FIRES.
GASOLINE FIRES AND HANDLING FUEL SAFELY
Fuels and their vapors are flammable and highly volatile!
Fuel fires can spread quickly and even can be explosive!
Never use fuel when a spark or flame may be present.
Never use fuel where a potential source of ignition could
occur. (Examples include: hot water heaters or space
heaters, clothes dryer, electric motors, etc). Keep flames
and sparks away from engine and fuel at all times to
prevent fires.
PREVENTION OF GASOLINE FIRES
Never fill your fuel tank with fuel inside a building
including a basement, garage, barn, shed, house,
porch, etc.
Always fill fuel tank outside in a well ventilated area.
Stop any engine and allow cooling before refilling tank.
Never remove the fuel cap or add fuel while the engine
is running.
Never drain fuel from engine in an enclosed area.
Always wipe up excess (spilled) fuel from engine before
starting. Clean up spilled fuel immediately.
Allow spilled fuel to dry, after wiping and before starting
Always allow fuel fumes/vapors to escape from the area
before starting engine.
Test the fuel cap for proper installation and tightness
before starting and using engine.
Always run the engine with fuel cap properly installed on
the engine and gas cap vent screw unscrewed.
Replace any fuel cap that allows gas to spill or leak.
Never smoke near any fumes/vapor or while refilling
engine fuel tank.
Do not store unit with fuel in the fuel tank in a confined
space. Fuel and fuel vapors are highly explosive.
Always check that gas cap vent screw is tightly secured.
Never pour fuel from engine fuel tank.
Never siphon fuel by mouth to drain fuel tank.
Always have an adult fill the fuel tank.
Never allow an adult or anyone under the influence of
drugs or alcohol to fill engine.
Never allow children to fill the engine or operate this
unit.
PREVENTION OF BURNS AND FIRES
Never remove the muffler guard from the engine.
Never touch the muffler guard because it is extremely
hot and will cause severe burns.
Never touch parts of the engine that become hot after
operation.
Always keep materials and debris away from muffler
guard and other hot parts of the engine to avoid fires.
This engine is designed to operate using a catalytic
converter which contributes to the engine’s compliance
with the EPA.
CAUTION
TAKE GREAT CAUTION WITH MUFFLER, MUFFLER
GUARD & OTHER PARTS OF ENGINE AS THEY
BECOME EXTREMELY HOT DURING OPERATION.
THESE PARTS REMAIN EXTREMELY HOT EVEN
AFTER ENGINE HAS STOPPED.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
advertisement
Key Features
- Powerful engine for efficient drilling
- Compact design for easy handling and storage
- Ergonomic handles for comfortable operation
- Safety features to protect the user from injury
- Durable construction for long-lasting use
Related manuals
Frequently Answers and Questions
How do I register my purchase?
You can register your purchase online at www.thunderbayproducts.com or by filling out and mailing the enclosed warranty card.
What are the key safety precautions I need to follow when using the auger?
Never carry running powerhead between holes, keep hands, feet, hair and any loose clothing away from any moving parts on engine and auger at all times, always wear protective hearing device, never allow children to operate power auger, do not operate auger under the influence of alcohol or drugs, keep all screws, nuts and bolts tight.
What should I do if the earth auger will not turn in the hole?
Turn engine off and allow it to cool before attempting to remove it.
advertisement
