Forza Power Technologies FDC-006K uninterruptible power supply (UPS) Troubleshooting guide
Forza Power Technologies FDC-006K is a high-performance online UPS capable of delivering 6000 VA/4800W of clean and reliable power to critical loads. Featuring advanced technology, it offers superior protection against power disturbances such as blackouts, brownouts, surges, and voltage fluctuations. Suitable for various applications, including data centers, telecommunications, medical equipment, and industrial automation, it ensures continuous operation of sensitive electronics during power interruptions.
advertisement
2 Year
Warranty
Warranty
Table of Contents
Table of Contents
1. Introduction
2. Installation and operation
3. Advanced operation
4. Troubleshooting guide
5. Storage and maintenance
6. Technical specifications
1-1. Transportation and storage
1-2. Preliminary steps
1-3. Initial setup
1-4. Important safety instructions
1-5. Standards
2.1 Unpacking and inspection
2.2 UPS front and rear panel views
2.3 Single UPS installation
2.4 Output configuration
2.5 UPS installation for parallel systems
2.6 ForzaTracker monitoring software
3.1 Description of buttons and functions
3.2 LED Indicators and LCD panel
3.3 Audible alarm
3.4 Single UPS Operation
3.5 Parallel operation
3.6. Abbreviations in the LCD Display
3.7 UPS parameter settings
3.8 Operating Mode/Status Description
3.9 Fault codes
3.10 Warning indicators
Table of Contents
1. Introduction
2. Installation and operation
3. Advanced operation
4. Troubleshooting guide
5. Storage and maintenance
6. Technical specifications
1-1. Transportation and storage
1-2. Preliminary steps
1-3. Initial setup
1-4. Important safety instructions
1-5. Standards
2.1 Unpacking and inspection
2.2 UPS front and rear panel views
2.3 Single UPS installation
2.4 Output configuration
2.5 UPS installation for parallel systems
2.6 ForzaTracker monitoring software
3.1 Description of buttons and functions
3.2 LED Indicators and LCD panel
3.3 Audible alarm
3.4 Single UPS Operation
3.5 Parallel operation
3.6. Abbreviations in the LCD Display
3.7 UPS parameter settings
3.8 Operating Mode/Status Description
3.9 Fault codes
3.10 Warning indicators
1. Introduction
Thank you for purchasing the Forza Atlas FDC 006K/010K Online UPS. To enjoy all the features and benefits of this unit,
please read and follow all installation and operation instructions thoroughly before unpacking, installing or operating this
device. After you have read this manual, keep it in a safe place for future reference.
The information contained in this manual covers the 6000 and 10000 VA uninterruptible power systems, their basic functions,
operating procedures, options available and troubleshooting guide. It also includes information on how to ship, store, handle,
and install the equipment.
1-1. Transportation and storage
Transport the UPS system only in the original package to protect it against shock and impact.
The UPS must be stored in a dry, well-ventilated area.
1-2. Preliminary steps
1-3. Initial setup
1-4. Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Do not connect appliances or equipment that may overload the UPS system (such as big motor-type equipment) to the
UPS output sockets or terminal.
Place cables in such a way that no one can step on or trip over them.
Do not block air vents in the housing of UPS. The UPS must be installed in a location with good ventilation. Ensure
enough space on each side for ventilation.
The UPS is provided with an earthed terminal. Equipotential earth bonding to the external UPS battery cabinets must be
provided if such configuration is used.
The UPS can be installed only by qualified maintenance personnel.
These UPS units are extremely heavy. Caution should be taken in moving and positioning equipment.
An appropriate disconnect device as short-circuit backup protection should be provided in the building wiring installation.
An integral single emergency switching device which prevents further supply to the load by the UPS in any mode of
operation should be provided in the building wiring installation
Connect the earth before connecting the unit to the building wiring terminal.
Installation and wiring must be performed in accordance with local electrical regulations and laws.
Water condensation may occur if the UPS is unpacked in a very cold environment and then moved to a warmer location.
The UPS must be thoroughly dry before being installed. Failure to do so may increase the risk of electric shock.
Do not install the UPS system near water or in moist environments.
To reduce the risk of overheating, do not cover the cooling vents in the UPS housing.
Avoid exposing the UPS to direct sunlight or installing the unit near heat-emitting appliances, such as electric heaters
or furnaces.
Do not disconnect the earth conductor cable on the UPS or the building wiring terminals at any time since this would
cancel the protective earth of the UPS system and of all connected loads.
The UPS system features its own, internal current source (batteries). The UPS output sockets or output terminals block
may be electrically live even if the UPS system is not connected to the building wiring outlet.
In the event of an emergency, press the OFF button and disconnect the power cord from the AC mains to properly
disable the UPS.
Do not allow any kind of liquid or foreign object to enter this UPS unit. Do not place beverages or any other containers
with liquid on or nearby the unit.
The UPS can be operated by any individuals with no previous experience.
Thank you for purchasing the Forza Atlas FDC 006K/010K Online UPS. To enjoy all the features and benefits of this unit,
please read and follow all installation and operation instructions thoroughly before unpacking, installing or operating this
device. After you have read this manual, keep it in a safe place for future reference.
The information contained in this manual covers the 6000 and 10000 VA uninterruptible power systems, their basic functions,
operating procedures, options available and troubleshooting guide. It also includes information on how to ship, store, handle,
and install the equipment.
1-1. Transportation and storage
Transport the UPS system only in the original package to protect it against shock and impact.
The UPS must be stored in a dry, well-ventilated area.
1-2. Preliminary steps
1-3. Initial setup
1-4. Important safety instructions
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Do not connect appliances or equipment that may overload the UPS system (such as big motor-type equipment) to the
UPS output sockets or terminal.
Place cables in such a way that no one can step on or trip over them.
Do not block air vents in the housing of UPS. The UPS must be installed in a location with good ventilation. Ensure
enough space on each side for ventilation.
The UPS is provided with an earthed terminal. Equipotential earth bonding to the external UPS battery cabinets must be
provided if such configuration is used.
The UPS can be installed only by qualified maintenance personnel.
These UPS units are extremely heavy. Caution should be taken in moving and positioning equipment.
An appropriate disconnect device as short-circuit backup protection should be provided in the building wiring installation.
An integral single emergency switching device which prevents further supply to the load by the UPS in any mode of
operation should be provided in the building wiring installation
Connect the earth before connecting the unit to the building wiring terminal.
Installation and wiring must be performed in accordance with local electrical regulations and laws.
Water condensation may occur if the UPS is unpacked in a very cold environment and then moved to a warmer location.
The UPS must be thoroughly dry before being installed. Failure to do so may increase the risk of electric shock.
Do not install the UPS system near water or in moist environments.
To reduce the risk of overheating, do not cover the cooling vents in the UPS housing.
Avoid exposing the UPS to direct sunlight or installing the unit near heat-emitting appliances, such as electric heaters
or furnaces.
Do not disconnect the earth conductor cable on the UPS or the building wiring terminals at any time since this would
cancel the protective earth of the UPS system and of all connected loads.
The UPS system features its own, internal current source (batteries). The UPS output sockets or output terminals block
may be electrically live even if the UPS system is not connected to the building wiring outlet.
In the event of an emergency, press the OFF button and disconnect the power cord from the AC mains to properly
disable the UPS.
Do not allow any kind of liquid or foreign object to enter this UPS unit. Do not place beverages or any other containers
with liquid on or nearby the unit.
The UPS can be operated by any individuals with no previous experience.
1-5. Standards
2. Installation and operation
2-1. Unpacking and inspection
•
•
•
•
One UPS unit
One user manual (digital copy in CD)
One monitoring software CD (ForzaTracker)
One USB cable Warranty certificate
The Forza Atlas series is offered in two different models, as shown in the table below.
Carefully inspect the UPS to check for any damages that may have occurred during shipping. Should any evidence of
damage be found or if some parts are missing, do not turn the UPS on; you must immediately notify the carrier or dealer
where you purchased the unit.
Remove the UPS from its package and make sure that all the following items are included:
* Safety
IEC/EN 62040-1
* EMI
Conducted emission
Radiated emission
* EMS
ESD
RS
EFT
SURGE
CS
Power-frequency magnetic field
Low frequency signals
Warning: This product is intended for commercial and industrial applications.
Installation in the proper environment is required.
IEC/EN 62040-2
IEC/EN 62040-2
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
IEC/EN 61000-2-2
Category C3
Category C3
Level 4
Level 3
Level 4
Level 4
Level 3
Level 4
Model Capacity
FDC-006K
FDC-010K
6000 VA (4800 W)
10000 VA (8000 W)
2. Installation and operation
2-1. Unpacking and inspection
•
•
•
•
One UPS unit
One user manual (digital copy in CD)
One monitoring software CD (ForzaTracker)
One USB cable Warranty certificate
The Forza Atlas series is offered in two different models, as shown in the table below.
Carefully inspect the UPS to check for any damages that may have occurred during shipping. Should any evidence of
damage be found or if some parts are missing, do not turn the UPS on; you must immediately notify the carrier or dealer
where you purchased the unit.
Remove the UPS from its package and make sure that all the following items are included:
* Safety
IEC/EN 62040-1
* EMI
Conducted emission
Radiated emission
* EMS
ESD
RS
EFT
SURGE
CS
Power-frequency magnetic field
Low frequency signals
Warning: This product is intended for commercial and industrial applications.
Installation in the proper environment is required.
IEC/EN 62040-2
IEC/EN 62040-2
IEC/EN 61000-4-2
IEC/EN 61000-4-3
IEC/EN 61000-4-4
IEC/EN 61000-4-5
IEC/EN 61000-4-6
IEC/EN 61000-4-8
IEC/EN 61000-2-2
Category C3
Category C3
Level 4
Level 3
Level 4
Level 4
Level 3
Level 4
Model Capacity
FDC-006K
FDC-010K
6000 VA (4800 W)
10000 VA (8000 W)
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
advertisement
Key Features
- 6000 VA (4800 W) capacity for ample power backup
- Intelligent battery management for extended battery life and enhanced reliability
- Surge and spike protection to safeguard connected devices from harmful power fluctuations
- Remote monitoring capabilities via RS-232 and USB ports for convenient management
- Compact and lightweight design for easy placement and installation
- User-friendly LCD display for clear and concise status updates
- Emergency power off (EPO) connector for added safety
Related manuals
Frequently Answers and Questions
What is the capacity of the Forza Power Technologies FDC-006K?
The Forza Power Technologies FDC-006K has a capacity of 6000 VA (4800 W), providing ample power backup for critical applications.
Does the FDC-006K offer surge protection?
Yes, the FDC-006K features surge protection to safeguard connected devices from harmful power fluctuations, ensuring the longevity and reliability of your equipment.
Can I monitor the FDC-006K remotely?
Yes, the FDC-006K supports remote monitoring via RS-232 and USB ports, allowing you to conveniently manage and monitor the status of your UPS from a remote location.
advertisement