Prestigio GeoVision 7777 User manual
Prestigio GeoVision 7777 is a versatile device that combines navigation, multimedia, and communication capabilities to enhance your on-the-go experiences. With its built-in GPS receiver, it guides you with precise turn-by-turn directions, helping you reach your destinations efficiently. The device comes with pre-installed maps, allowing you to navigate even without an internet connection. Additionally, you can connect to Wi-Fi hotspots to access real-time traffic information and update your maps for the most up-to-date routes.
advertisement
CAUTION
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the
product from the wall outlet before servicing or when it is unused for a long period of
time.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
3. Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Important Safety
Instructions
Accessories List
ITEM NAME QTY
Car Charger 1
Mounting Cradle 1
USB Cable 1
AC charger 1
USB Host cable 1
Stylish Carrying case 1
CD 1
User Manual 1
Warranty Card
1
Accessories
EN
EN – 1
1. To reduce the risk of electric shock, do not remove the cover (or back). No
user-serviceable parts inside. Refer servicing to qualified service personnel. Unplug the
product from the wall outlet before servicing or when it is unused for a long period of
time.
2. The manufacturer should not hold responsibility for the damage caused by any
substitutions and modifications of the product without authorization from the
manufacturer or authorized unit.
3. Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
WARNING
The apparatus shall not be exposed to dripping or splashing and that no objects filled
with liquids, such as vases, shall be placed on the apparatus.
The lightning flash with arrowhead symbol, within an equilateral triangle, is
intended to alert the user to the presence of un-insulated “dangerous voltage”
within the product’s enclosure that may be of sufficient magnitude to
constitute a risk of electric to persons.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing) instructions
in the literature accompanying the appliance.
Important Safety
Instructions
Accessories List
ITEM NAME QTY
Car Charger 1
Mounting Cradle 1
USB Cable 1
AC charger 1
USB Host cable 1
Stylish Carrying case 1
CD 1
User Manual 1
Warranty Card
1
Accessories
EN
EN – 1
Power Turn on/off the device; Suspend/Activate the
device
Vol +\ Vol - Button Adjust the volume level.
Built-in Microphone Record sounds.
Earphone Jack Earphones connection.
Micro SD Card Slot Insert Micro SD card.
HDMI HDMI cable connection
USB port USB connection
DC port AC adapter connection
Front Camera Take photos or video chat
Speaker Emit sound, voice or music
Rear Camera Take photos.
10
9
8
7
6
5
4
3
1
View of Main Unit
EN
2
11
9
10
1 2
5
6
3
4
7
11
8
EN – 2
NOTE:
Please always make sure that the device and any other external device
connected to the device are powered off and unplugged from the power
supply before attempting to connect the device to any external device.
Inserting microSD Card
z To insert a microSD card, place connector towards device and card
label towards the front side of the device.
z To remove a microSD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Charging
z Insert the connector of adaptor to the DC port of the device and connect the power
adapter to the wall socket for charging.
Device Connection
device
Vol +\ Vol - Button Adjust the volume level.
Built-in Microphone Record sounds.
Earphone Jack Earphones connection.
Micro SD Card Slot Insert Micro SD card.
HDMI HDMI cable connection
USB port USB connection
DC port AC adapter connection
Front Camera Take photos or video chat
Speaker Emit sound, voice or music
Rear Camera Take photos.
10
9
8
7
6
5
4
3
1
View of Main Unit
EN
2
11
9
10
1 2
5
6
3
4
7
11
8
EN – 2
NOTE:
Please always make sure that the device and any other external device
connected to the device are powered off and unplugged from the power
supply before attempting to connect the device to any external device.
Inserting microSD Card
z To insert a microSD card, place connector towards device and card
label towards the front side of the device.
z To remove a microSD card, gently press the edge of the card to
release the safety lock and pull the card out of the slot.
NOTE:
Please always make sure that no application is accessing the microSD
card before extraction.
Charging
z Insert the connector of adaptor to the DC port of the device and connect the power
adapter to the wall socket for charging.
Device Connection
1. Connecting to Car Charger
z Insert car charger connector into vehicle 12V accessory/cigarette socket to start
charging.
NOTE:
Please connect the car charger to
vehicle 12V accessory/cigarette
socket after vehicle engine is started
to protect the device from sudden
surges in current.
Connecting to Earphones
z Insert earphone plug (not included) into the appropriate earphone port to switch
audio output from device speaker to earphone.
NOTE:
Excessively loud volume is potentially detrimental to hearing. Please turn
down the volume before connecting the earphone and gradually turn up
the volume to a comfortable level.
Device Connection
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
battery (for at least 4 hours) before initial use. Battery status level is shown at the display
bottom right corner. When the battery is fully charged the following icon will be displayed
Working conditions and precautions for the rechargeable battery
z Device with new batteries should be fully charged before initial use.
z Battery should only be used and charged when temperatures are between 0° ~
37°C.
z It is not necessary to start charging the device before the battery is fully discharged.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after vehicle engine is started to protect the device from sudden
surges in current.
Cautions on Battery
Charging
EN
EN – 3
z Insert car charger connector into vehicle 12V accessory/cigarette socket to start
charging.
NOTE:
Please connect the car charger to
vehicle 12V accessory/cigarette
socket after vehicle engine is started
to protect the device from sudden
surges in current.
Connecting to Earphones
z Insert earphone plug (not included) into the appropriate earphone port to switch
audio output from device speaker to earphone.
NOTE:
Excessively loud volume is potentially detrimental to hearing. Please turn
down the volume before connecting the earphone and gradually turn up
the volume to a comfortable level.
Device Connection
About Rechargeable Battery
The device is equipped with a built-in rechargeable battery. Please fully charge the
battery (for at least 4 hours) before initial use. Battery status level is shown at the display
bottom right corner. When the battery is fully charged the following icon will be displayed
Working conditions and precautions for the rechargeable battery
z Device with new batteries should be fully charged before initial use.
z Battery should only be used and charged when temperatures are between 0° ~
37°C.
z It is not necessary to start charging the device before the battery is fully discharged.
NOTE:
Please connect the car charger to vehicle 12V accessory/cigarette
socket after vehicle engine is started to protect the device from sudden
surges in current.
Cautions on Battery
Charging
EN
EN – 3
NOTE:
z Do not operate the device while driving.
z Please select an appropriate location on the dashboard or
windshield where the device will not obstruct driver field of vision.
Device Mounting Procedures
The device can be securely mounted on vehicle dashboard or windshield with the
mounting cradle included. Please follow procedures below to operate mounting cradle:
1. Select an appropriate location on windshield or dashboard where the device and
mounting cradle will not obstruct driver field of vision.
2. Please also make sure that the device has a clear view of sky to attain best GPS
reception.
z Place device on the bracket with bottom positioned on the
appropriate socket.
z Push on the top edge to securely install device onto the cradle.
z Lift the suction cup lever and press the suction cup at desired
location.
z Press down the suction cup lever to secure the mounting cradle on
the surface.
z Rotate the knob to adjust device to desired viewing angle.
To Dismount Device
1. Push the tap on top of the mounting cradle to release the device.
2. Lift the suction cup lever to easily remove the suction cup from windshield or
dashboard.
Using Mounting
Cradle
EN
EN – 4
z In the Home menu press the icon and select Settings icon to access the list
of options. Select Wireless & networks.
z If the Wi-Fi is off, tap on the Wi-Fi line to turn it on.
z The device will scan for available Wi-Fi networks and display them at the right of
the screen.
z Tap on the network you want to connect to. Then tap inside the Wireless password
field to make the virtual keyboard appear. Enter the required network information,
tap on Enter, and then tap on Connect.
z Your device will now attempt to establish a connection to the Wi-Fi access point
with the network parameters you entered.
1. Press and hold Power Button to turn on device.
2. Shortly after the greeting screen is shown, the main menu will be
displayed.
3. Tap the corresponding buttons with fingers to navigate various functions.
4. Press and hold Power Button to turn off the device
5. Press the Power Button once to enter sleep mode and press it again to
awake the device.
Getting Started
Connecting to WiFi
z Do not operate the device while driving.
z Please select an appropriate location on the dashboard or
windshield where the device will not obstruct driver field of vision.
Device Mounting Procedures
The device can be securely mounted on vehicle dashboard or windshield with the
mounting cradle included. Please follow procedures below to operate mounting cradle:
1. Select an appropriate location on windshield or dashboard where the device and
mounting cradle will not obstruct driver field of vision.
2. Please also make sure that the device has a clear view of sky to attain best GPS
reception.
z Place device on the bracket with bottom positioned on the
appropriate socket.
z Push on the top edge to securely install device onto the cradle.
z Lift the suction cup lever and press the suction cup at desired
location.
z Press down the suction cup lever to secure the mounting cradle on
the surface.
z Rotate the knob to adjust device to desired viewing angle.
To Dismount Device
1. Push the tap on top of the mounting cradle to release the device.
2. Lift the suction cup lever to easily remove the suction cup from windshield or
dashboard.
Using Mounting
Cradle
EN
EN – 4
z In the Home menu press the icon and select Settings icon to access the list
of options. Select Wireless & networks.
z If the Wi-Fi is off, tap on the Wi-Fi line to turn it on.
z The device will scan for available Wi-Fi networks and display them at the right of
the screen.
z Tap on the network you want to connect to. Then tap inside the Wireless password
field to make the virtual keyboard appear. Enter the required network information,
tap on Enter, and then tap on Connect.
z Your device will now attempt to establish a connection to the Wi-Fi access point
with the network parameters you entered.
1. Press and hold Power Button to turn on device.
2. Shortly after the greeting screen is shown, the main menu will be
displayed.
3. Tap the corresponding buttons with fingers to navigate various functions.
4. Press and hold Power Button to turn off the device
5. Press the Power Button once to enter sleep mode and press it again to
awake the device.
Getting Started
Connecting to WiFi
5
6
7
8
9
10
11
12
advertisement
Key Features
- GPS navigation
- Place of Interest search
- Voice guidance
- Route planning customization
- Multiple navigation languages
- Built-in rechargeable battery
- Additional application
- 7” display
Related manuals
Frequently Answers and Questions
How do I connect the GeoVision 7777 to a car charger?
Insert the car charger connector into the vehicle's 12V accessory/cigarette socket after starting the engine. Make sure the device is powered off before connecting the charger.
How do I change the navigation language?
Go to the 'Settings' menu and select 'Language'. You can then choose your preferred language.
What is the battery life of the GeoVision 7777?
The device has a built-in 2900 mAh Li-Polymer battery. The actual battery life depends on usage patterns, such as screen brightness and GPS signal strength.
Can I download additional maps for the GeoVision 7777?
Yes, you can visit www.naviextras.com to download additional maps, 3D landmarks and other content.
advertisement