OttLite SM200C FFP LED Sewing Machine Light Instruction manual
The OttLite SM200C-FFP 2-in-1 LED Sewing Machine Light can be used as a table lamp, clipped to a table edge, or mounted to a sewing machine with the provided adhesive strip. It is powered by a USB cord or 3 AAA batteries, and features an adjustable gooseneck for positioning the light. You can also use the optional magnifier head to help with intricate sewing tasks.
advertisement
2-in-1 LED Sewing Machine Light
SM200C-FFP GX8287
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite ® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by mail, or
register online by going to: OttLite.com/warranty
Your OttLite 2-in-1 LED Sewing Machine Light has multiple uses:
• Freestanding on work surface
• Mount to sewing machine with adhesive strip
• Clip to a table edge
• Clip to book or other reading material
LIGHT ASSEMBLY
1. Remove the light and all parts from packing and verify presence of all light parts
before proceeding.
Light Body part (A) qty. 1
LED Light Head part (F) qty. 1
Magnifier Head part (G) qty. 1
Mounting Bracket part (J) qty. 1
Adhesive Strip part (S) qty. 1
USB Cord part (D) qty. 1
2. The 2-in-1 LED Sewing Machine Light is powered by USB cord (D) (included) or by
3 AAA batteries (not included), alkaline or rechargeable batteries are recommended.
3. To use USB cord (D), connect input (L) to 2-in-1 LED Sewing Machine Light
connection port (K). Connect USB input (M) to a USB power source (reference
Figure 7).
NOTE: This product does not contain a charging mechanism; therefore, the USB
cord is provided solely as a power source connection to a USB port such as a
computer. During battery operation, DO NOT attach USB to item as it will cut-off
DC Battery power.
4. Install batteries per BATTERY INSTALLATION procedure.
5. Install selected magnifier head (G) or LED light head (F) by pushing input (C) of
gooseneck (B) into each head.
6. To remove an installed head (F or G) firmly grasp gooseneck (B) and gently pull mount
head away from gooseneck.
7. Your OttLite 2-in-1 LED Sewing Machine Light can be used as a table lamp, clipped
to an appropriate edge of ¼ to 1” thickness or used on a sewing machine. Follow the
selected method of mounting as detailed below.
TABLE SURFACE USE:
1. Set light body (A) on a steady flat surface as pictured in Figure 1.
NOTE: When using on a table surface, there should be limited movement to
gooseneck (B) to avoid tipping.
2. Turn the LED light ON or OFF by depressing switch (E).
CLIP USE:
1. An appropriate attachment edge will be thicker than ¼ inch and less than 1 inch.
2. Attach the clip (H) only if the entire clip can be utilized to hold the lamp. See Figure 2.
3. Position the magnifier or light as needed by holding light body (A) steady and flexing
the gooseneck (B).
4. Turn the LED light ON or OFF by depressing switch (E).
DO NOT FORCE the flexible gooseneck into any position as lamp damage may result.
SEWING MACHINE USE:
1. The Ottlite 2-in-1 LED Sewing Machine Light can be used as an attachment to a
sewing machine with the use of mounting bracket (J) and adhesive strip (S).
2. Install mounting bracket (J) by placing it on the bottom of light body (A) then sliding it
towards gooseneck until it is in locked position..
3. To apply adhesive strip (S) to bottom of mounting bracket (J), see ADHESIVE STRIP
APPLICATION section.
4. Select the mounting location on the sewing machine. For best results the mounting
surface should be flat, clean, dry and free of any residue.
5. Place mounting bracket (J) over the desired location and mark the desired
orientation. See Figure 3 for an example of possible location placement.
6. Repositioning will not be possible after placing adhesive strip (S). The adhesive
strip (S) can only be used once.
ADHESIVE STRIP APPLICATION:
1. Use adhesive strip (S) and apply to bottom of bracket (J). See Figure 4.
A. Step 1 - REMOVE RED liner.
B. Step 2 - PRESS adhesive to mounting bracket (J). Ensure rounded tab is clear
of bracket. If the tab is not clear it will tear off and the adhesive strip will
be difficult to remove.
C. Step 3 - REMOVE BLACK liner.
D. Step 4 - PRESS to surface for up to 30 seconds for maximum holding strength.
2. To remove adhesive strip (S). See Figure 5.
A. DO NOT pull strip towards you.
B. Step 5 - Hold light body (A) and mounting bracket (J) gently to prevent from them
from snapping fingers. DO NOT press mounting bracket (J) against surface.
C. Step 6 - Firmly grab rounded tip of adhesive strip (S) and STRETCH STRAIGHT
DOWN AT LEAST 12 INCHES until mounting bracket and strip release.
BATTERY INSTALLATION:
1. Your OttLite 2-in-1 LED Sewing Machine Light is powered by 3 AAA batteries (not
included). With standard alkaline batteries, your light will operate approximately
72 hours. Light output will slowly diminish as the batteries lose energy.
WARNING: Keep away from children. If swallowed, promptly see a doctor. Do
not install backwards, charge, put in fire or mix with other battery types – may
explode or leak causing injury.
2. To install batteries, slide battery door (H) away stem from gooseneck (B); see Figure 6.
3. Install the 3 batteries as indicated by the graphic inside the battery compartment.
Battery negative terminals should point toward the spring.
4. Install the battery door by placing it on the light body (A) then sliding it towards
gooseneck until it is in locked position.
Notice: Only replace batteries as a simultaneous set and do not mix with older
batteries. Remove batteries if consumed or if the light has not been in use for a
long period of time.
NOTE: The important safety instructions appearing in this instruction sheet are not meant
to cover all possible conditions and situations that may occur. It must be understood that
common sense, caution, and care must be used with any electrical product.
CAUTION: Any change or modification to product not expressly recognized by OttLite
Technologies voids OttLite’s responsibility for proper function of product.
Caution: INDOOR USE ONLY. NEVER LEAVE THE MAGNIFIER LENS
UNATTENDED IN DIRECT SUNLIGHT OR WHERE LIGHT CAN SHINE THROUGH IT AS THIS
CAN POSE A RISK OF FIRE.
FCC Part 15Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
notiCE: This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
CAN ICES-3 (B)/NMB-3 (B).
Accessories: USB cord
EngliSh 2-in-1 LED Sewing Machine Light
INS160287 REV092316
Figure 1 Figure 2
Figure 3
Figure 5
S
Figure 4
J
H
+ +
+
_
_
_
Figure 6
A
B
E
M
+ +
+ _
_
_
K L
D
Figure 7
J
A
G
F
C
SM200C-FFP GX8287
CONGRATULATIONS!
You’ve purchased the finest in natural lighting technology with your new OttLite ® product.
PRODUCT REGISTRATION FORM
Please complete the enclosed Product Registration Form and return it today by mail, or
register online by going to: OttLite.com/warranty
Your OttLite 2-in-1 LED Sewing Machine Light has multiple uses:
• Freestanding on work surface
• Mount to sewing machine with adhesive strip
• Clip to a table edge
• Clip to book or other reading material
LIGHT ASSEMBLY
1. Remove the light and all parts from packing and verify presence of all light parts
before proceeding.
Light Body part (A) qty. 1
LED Light Head part (F) qty. 1
Magnifier Head part (G) qty. 1
Mounting Bracket part (J) qty. 1
Adhesive Strip part (S) qty. 1
USB Cord part (D) qty. 1
2. The 2-in-1 LED Sewing Machine Light is powered by USB cord (D) (included) or by
3 AAA batteries (not included), alkaline or rechargeable batteries are recommended.
3. To use USB cord (D), connect input (L) to 2-in-1 LED Sewing Machine Light
connection port (K). Connect USB input (M) to a USB power source (reference
Figure 7).
NOTE: This product does not contain a charging mechanism; therefore, the USB
cord is provided solely as a power source connection to a USB port such as a
computer. During battery operation, DO NOT attach USB to item as it will cut-off
DC Battery power.
4. Install batteries per BATTERY INSTALLATION procedure.
5. Install selected magnifier head (G) or LED light head (F) by pushing input (C) of
gooseneck (B) into each head.
6. To remove an installed head (F or G) firmly grasp gooseneck (B) and gently pull mount
head away from gooseneck.
7. Your OttLite 2-in-1 LED Sewing Machine Light can be used as a table lamp, clipped
to an appropriate edge of ¼ to 1” thickness or used on a sewing machine. Follow the
selected method of mounting as detailed below.
TABLE SURFACE USE:
1. Set light body (A) on a steady flat surface as pictured in Figure 1.
NOTE: When using on a table surface, there should be limited movement to
gooseneck (B) to avoid tipping.
2. Turn the LED light ON or OFF by depressing switch (E).
CLIP USE:
1. An appropriate attachment edge will be thicker than ¼ inch and less than 1 inch.
2. Attach the clip (H) only if the entire clip can be utilized to hold the lamp. See Figure 2.
3. Position the magnifier or light as needed by holding light body (A) steady and flexing
the gooseneck (B).
4. Turn the LED light ON or OFF by depressing switch (E).
DO NOT FORCE the flexible gooseneck into any position as lamp damage may result.
SEWING MACHINE USE:
1. The Ottlite 2-in-1 LED Sewing Machine Light can be used as an attachment to a
sewing machine with the use of mounting bracket (J) and adhesive strip (S).
2. Install mounting bracket (J) by placing it on the bottom of light body (A) then sliding it
towards gooseneck until it is in locked position..
3. To apply adhesive strip (S) to bottom of mounting bracket (J), see ADHESIVE STRIP
APPLICATION section.
4. Select the mounting location on the sewing machine. For best results the mounting
surface should be flat, clean, dry and free of any residue.
5. Place mounting bracket (J) over the desired location and mark the desired
orientation. See Figure 3 for an example of possible location placement.
6. Repositioning will not be possible after placing adhesive strip (S). The adhesive
strip (S) can only be used once.
ADHESIVE STRIP APPLICATION:
1. Use adhesive strip (S) and apply to bottom of bracket (J). See Figure 4.
A. Step 1 - REMOVE RED liner.
B. Step 2 - PRESS adhesive to mounting bracket (J). Ensure rounded tab is clear
of bracket. If the tab is not clear it will tear off and the adhesive strip will
be difficult to remove.
C. Step 3 - REMOVE BLACK liner.
D. Step 4 - PRESS to surface for up to 30 seconds for maximum holding strength.
2. To remove adhesive strip (S). See Figure 5.
A. DO NOT pull strip towards you.
B. Step 5 - Hold light body (A) and mounting bracket (J) gently to prevent from them
from snapping fingers. DO NOT press mounting bracket (J) against surface.
C. Step 6 - Firmly grab rounded tip of adhesive strip (S) and STRETCH STRAIGHT
DOWN AT LEAST 12 INCHES until mounting bracket and strip release.
BATTERY INSTALLATION:
1. Your OttLite 2-in-1 LED Sewing Machine Light is powered by 3 AAA batteries (not
included). With standard alkaline batteries, your light will operate approximately
72 hours. Light output will slowly diminish as the batteries lose energy.
WARNING: Keep away from children. If swallowed, promptly see a doctor. Do
not install backwards, charge, put in fire or mix with other battery types – may
explode or leak causing injury.
2. To install batteries, slide battery door (H) away stem from gooseneck (B); see Figure 6.
3. Install the 3 batteries as indicated by the graphic inside the battery compartment.
Battery negative terminals should point toward the spring.
4. Install the battery door by placing it on the light body (A) then sliding it towards
gooseneck until it is in locked position.
Notice: Only replace batteries as a simultaneous set and do not mix with older
batteries. Remove batteries if consumed or if the light has not been in use for a
long period of time.
NOTE: The important safety instructions appearing in this instruction sheet are not meant
to cover all possible conditions and situations that may occur. It must be understood that
common sense, caution, and care must be used with any electrical product.
CAUTION: Any change or modification to product not expressly recognized by OttLite
Technologies voids OttLite’s responsibility for proper function of product.
Caution: INDOOR USE ONLY. NEVER LEAVE THE MAGNIFIER LENS
UNATTENDED IN DIRECT SUNLIGHT OR WHERE LIGHT CAN SHINE THROUGH IT AS THIS
CAN POSE A RISK OF FIRE.
FCC Part 15Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that the interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
notiCE: This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
CAN ICES-3 (B)/NMB-3 (B).
Accessories: USB cord
EngliSh 2-in-1 LED Sewing Machine Light
INS160287 REV092316
Figure 1 Figure 2
Figure 3
Figure 5
S
Figure 4
J
H
+ +
+
_
_
_
Figure 6
A
B
E
M
+ +
+ _
_
_
K L
D
Figure 7
J
A
G
F
C
advertisement
Key Features
- LED light source
- USB powered
- 3 AAA battery operable
- Clippable
- Mountable
- Adjustable gooseneck
- Optional magnifier head
Related manuals
Frequently Answers and Questions
How do I power the OttLite SM200C-FFP 2-in-1 LED Sewing Machine Light?
You can power it using a USB cord or 3 AAA batteries. If using the USB cord, connect the input to the light's connection port and the USB input to a USB power source such as a computer. If using batteries, install them in the battery compartment according to the instructions in the manual.
How do I mount the OttLite SM200C-FFP 2-in-1 LED Sewing Machine Light to my sewing machine?
Use the mounting bracket and adhesive strip. Apply the adhesive strip to the bottom of the bracket, then place the bracket on the desired location on your sewing machine. Ensure the surface is clean, dry, and free of residue before applying the adhesive strip.
How do I attach the magnifier head to the OttLite SM200C-FFP 2-in-1 LED Sewing Machine Light?
Push the input of the gooseneck into the magnifier head. To remove the head, firmly grasp the gooseneck and gently pull the head away.
How do I turn the OttLite SM200C-FFP 2-in-1 LED Sewing Machine Light on and off?
Depress the switch on the light body to turn the LED light on or off.
advertisement