Massive Audio Dalek Sec User guide

Massive Audio Dalek Sec is a multifunctional, high-quality audio device that can be used in a variety of ways. It features versatile connectivity options: Bluetooth and 3.5mm auxiliary input and output, allowing you to pair it with various devices and even connect multiple speakers for surround sound. With its built-in microphone and noise cancellation, you can make phone calls hands-free, making it perfect for both personal use and conference calls. Enjoy up to 10 hours of playtime on a single charge thanks to the long-lasting rechargeable battery.

DALEK BLUETOOTH SPEAKER
USER GUIDE
Applicable models: MDBLK, MDBRZ

Features:
• Officially licenced BBC™ Dalek
• Sound Clips from the show that indicate different functions
• Antennae flash with music and get brighter as music volume increases
• Eye stalk with blue LED when paired with device
• Auxiliary in/out for linking multiple models together for surround sound
• Built in Omni-directional Microphone for phone calls with noise cancellation
• Multi-Function interface for Volume / Play / Pause / >> / << / Phone / Power
• Dual speakers with precision tuned ported enclosure
• Mil spec PCB with SMD parts for amplification
• Built-in noise rejection circuitry
• USB Rechargeable lithium-ion battery with 10 hours life
collectable
Specifications:
Connectivity: Wireless Bluetooth
Wireless Range: 33 Feet / 10 meters
Dimensions: 7.56"H x 4.65"W x 5.79"D
Battery Life: 10 hr. (varies upon volume and connection)
Battery: Rechargeable Lithium-ion via Micro USB
Tuning: Direct wave guide for 360 degree dispersion
Speakers: 2" High Power + 2.5" Passive Bass Radiator
Direct Connect 3.5mm Auxiliary In/Out
Microphone: Omni-directional -43db, SNR>60dB
USB Port: Micro-USB, DC5V/1A
Frequency: 100Hz - 20KHz
S/N: >80dB
™

Volume down / Next
Press button = volume down
Press and hold button = next song
Volume up / Previous
Press button = volume up
Press and hold button = previous song
Play / Pause - Power ON/OFF
Press button = play or pause
Press and hold the button for to power on
(If no Bluetooth connection is detected within 5 minutes the device will auto turn off)
Press and hold the button for 2 second to power off
Hands-free / Force Paring
When you receive a call, press to answer, Press again to end,
Press and hold 2 seconds to reject
When you are on the call, press and hold the button to switch from speaker to phone.
If you want to redial last call, double click the button
Press and hold button = Force pair Bluetooth
Power ON/OFF Switch
Slide button to right to turn on
Slide button to left to turn off
Button Interface
(1)
(2)
1 Volume up / Previous 6 AUX IN / AUX OUT
2 Volume down / Next 7 USB charging port
3 Hands-free / Force pairing 8 Battery indicator
4 Play, Pause / Power On/Off 9 Power ON/OFF
5 Microphone 10 LED indicators
(3)
(4)
(5)
(6)
(7) (8) (9)
(10) (10)

Replacing the Arms or Guns
Follow the instructions on the right to insert or remove appendages.
Do not to pick up your Dalek speakers by their arms or you risk the unit falling due to their interchangeable appendages.
Bluetooth Pairing
The Bluetooth name:
MDBLK name is “DALEK SEC” ;
MDBRZ name is “ASSAULT DALEK”
Turn on speaker, it will search for the last paired device and auto-pair to it
If no device can be auto-paired, the speaker will wait for a new device to connect
To force pair, hold the hands-free button to start a new pairing
Eye Stalk LED Indicator
Flashes blue 3 times = Unit is ON
Flashes blue continuously = Bluetooth connection in process
Blue LED stays lit = Paired to device
Blue LED stays lit = Auxiliary connection
Flashes red = Low Battery
Antennae LED Indicator
The LED will flash white with music
The LED will flash brighter with volume of music
Base LED Indicator
White LED stays lit = Unit is charging
Green LED stays lit = Unit is fully charged
Voice Indication
Power ON: “Reinitializing”
Power OFF: “Powering down” (Hold down power button)
Bluetooth pairing: “Seek, Locate, Exterminate”
Bluetooth connected: Gun blast
Aux In mode: “Dalek command override”
Low Battery: “You would make a good Dalek”
Charging
We recommend turning off Dalek before charging
Connect Dalek and power source via Micro-USB cable
The LED will be white while charging
The LED will be green when charging is completed
Auto Power Off
If no Bluetooth connection within 5 minutes, device auto power off.
When the battery is too low, device auto power off.
Twist arm right and remove
Insert arm and twist left