Mattel Loving Family Dollhouse Super Set Instruction Sheet
Mattel Loving Family Dollhouse Super Set features fun sounds and lights, encouraging imaginative play and storytelling. The set includes a kitchen with a stove and oven, a nursery with a changing table, and a living room with a staircase and balcony. Press the button on the stove or open the oven door to hear sound effects, and press the changing table for music and soft lights. The dollhouse also has six rooms, multiple floors, and accessories for endless play possibilities.
advertisement
www.fisher-price.com
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires six “AA” (LR6) alkaline batteries (not included).
Tool required for battery replacement: Phillips screwdriver (not included).
Please keep this instruction sheet for future reference,
as it contains important information.
Adult assembly is required.
Requires six “AA” (LR6) alkaline batteries (not included).
Tool required for battery replacement: Phillips screwdriver (not included).
2
Assembled Parts
House Base
Upper House Section
Staircase
Side Window
Trim
Front Door
Roof
Trim
Trim
Trim
Trim
Porch
Trim
Balcony
Front Window
Front Window Side Window
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. N9950b-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO
Assembled Parts
House Base
Upper House Section
Staircase
Side Window
Trim
Front Door
Roof
Trim
Trim
Trim
Trim
Porch
Trim
Balcony
Front Window
Front Window Side Window
Fisher-Price, Inc., a subsidiary of Mattel, Inc. East Aurora, New York 14052, U.S.A. N9950b-0920
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc. PRINTED IN MEXICO
3
Battery Installation
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to
be charged under adult supervision.
Battery
Compartment
Door
• Locate the battery compartment door on the back of the kitchen
and the nursery.
• Loosen the screw in each battery compartment door with a
Phillips screwdriver. Remove each battery compartment door.
• Insert three, “AA” (LR6) alkaline batteries in each toy.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace each battery compartment door and tighten each screw
with a Phillips screwdriver. Do not over-tighten.
• If the toy begins to operate erratically, you may need to reset the
electronics. Remove the batteries and reinsert them in the toy.
• When sounds or lights from these toys become faint or stop, it’s
time for an adult to change the batteries!
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
1.5V x 6
“AA” (LR6)
Battery Safety Information
Battery Installation
In exceptional circumstances, batteries may leak fluids that
can cause a chemical burn injury or ruin your toy. To avoid
battery leakage:
• Do not mix old and new batteries or batteries of different types:
alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use. Always
remove exhausted batteries from the toy. Dispose of batteries
safely. Do not dispose of this product in a fire. The batteries
inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same or equivalent type,
as recommended.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging.
• If removable, rechargeable batteries are used, they are only to
be charged under adult supervision.
Battery
Compartment
Door
• Locate the battery compartment door on the back of the kitchen
and the nursery.
• Loosen the screw in each battery compartment door with a
Phillips screwdriver. Remove each battery compartment door.
• Insert three, “AA” (LR6) alkaline batteries in each toy.
Hint: We recommend using alkaline batteries for longer battery life.
• Replace each battery compartment door and tighten each screw
with a Phillips screwdriver. Do not over-tighten.
• If the toy begins to operate erratically, you may need to reset the
electronics. Remove the batteries and reinsert them in the toy.
• When sounds or lights from these toys become faint or stop, it’s
time for an adult to change the batteries!
• Protect the environment by not disposing of this product
with household waste (2002/96/EC). Check your local
authority for recycling advice and facilities (Europe only).
1.5V x 6
“AA” (LR6)
Battery Safety Information
4
Assembly
• Place the house base on a flat surface so that the front of the
house faces up.
• “Snap” a front window to the house on each side of the
front door.
Hint: Press down at each tab to be sure each "snaps" into place.
1
Front Windows
House Base
• “Snap” the upper house section onto the top of the house.
Hint: Press down at each tab to be sure each "snaps" into place.
4
Upper House Section
• "Snap" the porch to the bottom of the house.
Hint: Press near each tab to be sure each "snaps" into place.
2 Porch
• Lift the house upright.
• Push the posts on each side of the porch until they "snap"
into place.
3 Posts
Assembly
• Place the house base on a flat surface so that the front of the
house faces up.
• “Snap” a front window to the house on each side of the
front door.
Hint: Press down at each tab to be sure each "snaps" into place.
1
Front Windows
House Base
• “Snap” the upper house section onto the top of the house.
Hint: Press down at each tab to be sure each "snaps" into place.
4
Upper House Section
• "Snap" the porch to the bottom of the house.
Hint: Press near each tab to be sure each "snaps" into place.
2 Porch
• Lift the house upright.
• Push the posts on each side of the porch until they "snap"
into place.
3 Posts
5
6
7
8
advertisement
Related manuals
advertisement