OvrC OVRC-200-PRO OvrC Pro Lifetime License + Hub Quick Start Guide
Show PDF Add to My manuals2 Pages
OvrC OVRC-200-PRO is a powerful and versatile device that can help you monitor and manage your network devices remotely. With OvrC OVRC-200-PRO, you can:
- Scan and monitor IP devices on your network, including non-OvrC equipment.
- Access the web GUI of any network device from anywhere on the LAN or Internet, without port forwarding.
- Give your clients control over their equipment with the OvrC Home app, available on Apple and Android devices.
- Monitor the health of your network, including the status of your ISP, LAN, Wi-Fi, and connected devices.
- Perform speed tests to keep an eye on your WAN connection speed.
advertisement
Step 1. Activate OvrC Pro Location
Log into your account at app.ovrc.com (mobile app
cannot be used for OvrC Pro activation).
Create or select a customer location in your OvrC
account, then click the Enable OvrC Pro button and
enter the activation code.
Note: If you are configuring equipment prior to an install, set up
the OvrC Pro-enabled customer location in your OvrC app at that
time. Then, once you go to the job, complete another network
scan to capture all of the customer-supplied equipment.
Step 2. Install and Claim the Hub
Connect the Hub to the LAN using the connection
diagram below, then claim it in the OvrC location.
Next, scan the LAN for other devices to claim and
monitor.
Hardware Connections
OVRC-200-PRO
OVRC-100-HUB
Quick Start Guide
©2016 OvrC | Ver. 160908-1550Support: 866.838.5052 | [email protected]
Activation Code Decal
Status LEDs
The Hub boots up in 1-2 minutes. Watch the LEDs
to determine if the power and network connection
are working correctly.
PWR (Red) On=powered on; flashing=low voltage;
off=no power.
ACT (Green) Flashes indicate CPU activity.
Ethernet
(Yellow)
On=100Mbps connection; off=10Mbps
connection.
Ethernet
(Green)
On=link established; flashes indicate network
activity. Off=no LAN connection detected.
Note: The Hub LAN port should negotiate a 100 Mbps
connection speed for optimum performance. Check the
settings and specs for the connected port if a 10Mbps speed
is negotiated (yellow Ethernet port LED off).
Ethernet Port
Connect to LAN port in the monitored subnet/
VLAN. A LAN port on a managed switch is
recommended for the best performance.
DC Power Input
Connect 5V DC power supply
to 120V AC power outlet.
USB ports for
future use
Do not cover vents
This device can only be added to an OvrC Pro-
enabled location. License includes 2 years of
service upon activation.
Activated licenses cannot be transferred to other
customers or locations in your OvrC account.
New to OvrC?
Visit www.ovrc.com to learn more about all of
the features and to create your own account.
Package Contents
1x OvrC-100-Hub
1x OvrC Pro Activation Code
1x Locking 5V DC power supply (not pictured)
Mounting Hardware (not pictured, includes side brackets and
attachment screws for shelf, surface, or rack mounting)
Two Year Limited Warranty
This OvrC product has a 2 Year limited warranty that includes
parts and labor repairs on all components found to be defective
in material or workmanship under normal conditions of use. This
warranty shall not apply to products that have been abused,
modified or disassembled. Products to be repaired under this
warranty must be returned to a designated service center with prior
notification and an assigned return authorization number (RA).
Log into your account at app.ovrc.com (mobile app
cannot be used for OvrC Pro activation).
Create or select a customer location in your OvrC
account, then click the Enable OvrC Pro button and
enter the activation code.
Note: If you are configuring equipment prior to an install, set up
the OvrC Pro-enabled customer location in your OvrC app at that
time. Then, once you go to the job, complete another network
scan to capture all of the customer-supplied equipment.
Step 2. Install and Claim the Hub
Connect the Hub to the LAN using the connection
diagram below, then claim it in the OvrC location.
Next, scan the LAN for other devices to claim and
monitor.
Hardware Connections
OVRC-200-PRO
OVRC-100-HUB
Quick Start Guide
©2016 OvrC | Ver. 160908-1550Support: 866.838.5052 | [email protected]
Activation Code Decal
Status LEDs
The Hub boots up in 1-2 minutes. Watch the LEDs
to determine if the power and network connection
are working correctly.
PWR (Red) On=powered on; flashing=low voltage;
off=no power.
ACT (Green) Flashes indicate CPU activity.
Ethernet
(Yellow)
On=100Mbps connection; off=10Mbps
connection.
Ethernet
(Green)
On=link established; flashes indicate network
activity. Off=no LAN connection detected.
Note: The Hub LAN port should negotiate a 100 Mbps
connection speed for optimum performance. Check the
settings and specs for the connected port if a 10Mbps speed
is negotiated (yellow Ethernet port LED off).
Ethernet Port
Connect to LAN port in the monitored subnet/
VLAN. A LAN port on a managed switch is
recommended for the best performance.
DC Power Input
Connect 5V DC power supply
to 120V AC power outlet.
USB ports for
future use
Do not cover vents
This device can only be added to an OvrC Pro-
enabled location. License includes 2 years of
service upon activation.
Activated licenses cannot be transferred to other
customers or locations in your OvrC account.
New to OvrC?
Visit www.ovrc.com to learn more about all of
the features and to create your own account.
Package Contents
1x OvrC-100-Hub
1x OvrC Pro Activation Code
1x Locking 5V DC power supply (not pictured)
Mounting Hardware (not pictured, includes side brackets and
attachment screws for shelf, surface, or rack mounting)
Two Year Limited Warranty
This OvrC product has a 2 Year limited warranty that includes
parts and labor repairs on all components found to be defective
in material or workmanship under normal conditions of use. This
warranty shall not apply to products that have been abused,
modified or disassembled. Products to be repaired under this
warranty must be returned to a designated service center with prior
notification and an assigned return authorization number (RA).
Step 3. Complete Network Setup
OvrC Pro is packed with features that make LAN setup and
maintenance easier than ever:
Scan and Monitor IP Devices
Scan for new devices manually or on a schedule
and organize the Device List using custom filters.
You can rename devices for easy ID and forget
devices you don’t want to track.
WebConnect GUI Access
Gain access to the web GUI of ANY network device
at the click of a mouse, even non-OvrC equipment,
from anywhere on the LAN or Internet. No port
forwarding is required. Click More on a Device List
entry to find WebConnect.
Client Control with OvrC Home App
Give your customer control over equipment and
make it easy to communicate with you when
issues arise. Available on Apple and Android app
marketplace.
Internet Speed Test*
Keep an eye on WAN connection speed by
performing speed tests manually or on a schedule.
OvrC Pro hosts it own testing service that gives
real-world results.
Monitor Control Systems
OvrC worked with control system manufacturers
including Control4 and URC to create drivers for
OvrC monitoring. See status, network settings and
more right from the OvrC device list.
Location Dashboard
View the network health summary of a client’s
location in a single view. Includes status of the ISP,
LAN, Wi-Fi, and connected devices.
*ISP download speeds greater than 80Mbps may not be
reflected.
Step 4. Configure OvrC Home
OvrC Home is a customizable end-user application for your clients.
You can create simple commands for your clients to use, such as
“Reset Cable Box”. New options will be introduced over time.
Within the OvrC Pro-enabled location, go to the “OvrC Home Setup”
tab and click the “Add Command” button to get started.
A. Configure the desired commands using the Add Command
wizard. Create a name, select an icon, and set the desired
behavior.
B. Click the “Complete Profile” button to update your company
contact info that will show up in the OvrC Home application. To
edit it in the future, go to the Account tab at the top of the screen
and click OvrC Home Information.
C. Add users to the account. Create a user name and password,
then enter the user’s email address. They will be sent a
download link for the app. (Email not required; app can be
downloaded directly for free from app store.)
D. Help your client get the OvrC Home app downloaded and
working, then test the commands together.
Important Note: Local GUI
We designed the product so that you do not need to use the
local GUI for setup or maintenance. If you choose to access the
GUI, the username is ovrc and the password is ovrc.
OvrC Pro is packed with features that make LAN setup and
maintenance easier than ever:
Scan and Monitor IP Devices
Scan for new devices manually or on a schedule
and organize the Device List using custom filters.
You can rename devices for easy ID and forget
devices you don’t want to track.
WebConnect GUI Access
Gain access to the web GUI of ANY network device
at the click of a mouse, even non-OvrC equipment,
from anywhere on the LAN or Internet. No port
forwarding is required. Click More on a Device List
entry to find WebConnect.
Client Control with OvrC Home App
Give your customer control over equipment and
make it easy to communicate with you when
issues arise. Available on Apple and Android app
marketplace.
Internet Speed Test*
Keep an eye on WAN connection speed by
performing speed tests manually or on a schedule.
OvrC Pro hosts it own testing service that gives
real-world results.
Monitor Control Systems
OvrC worked with control system manufacturers
including Control4 and URC to create drivers for
OvrC monitoring. See status, network settings and
more right from the OvrC device list.
Location Dashboard
View the network health summary of a client’s
location in a single view. Includes status of the ISP,
LAN, Wi-Fi, and connected devices.
*ISP download speeds greater than 80Mbps may not be
reflected.
Step 4. Configure OvrC Home
OvrC Home is a customizable end-user application for your clients.
You can create simple commands for your clients to use, such as
“Reset Cable Box”. New options will be introduced over time.
Within the OvrC Pro-enabled location, go to the “OvrC Home Setup”
tab and click the “Add Command” button to get started.
A. Configure the desired commands using the Add Command
wizard. Create a name, select an icon, and set the desired
behavior.
B. Click the “Complete Profile” button to update your company
contact info that will show up in the OvrC Home application. To
edit it in the future, go to the Account tab at the top of the screen
and click OvrC Home Information.
C. Add users to the account. Create a user name and password,
then enter the user’s email address. They will be sent a
download link for the app. (Email not required; app can be
downloaded directly for free from app store.)
D. Help your client get the OvrC Home app downloaded and
working, then test the commands together.
Important Note: Local GUI
We designed the product so that you do not need to use the
local GUI for setup or maintenance. If you choose to access the
GUI, the username is ovrc and the password is ovrc.
advertisement
Key Features
- Scan and monitor IP devices
- Access the web GUI of any network device
- Give your customers control over their equipment
- Perform internet speed tests
- Monitor control systems
- View the network health summary of a client’s location
Related manuals
Frequently Answers and Questions
How do I activate my OvrC Pro Location?
Log into your account at app.ovrc.com (mobile app cannot be used for OvrC Pro activation), create or select a customer location in your OvrC account, then click the Enable OvrC Pro button and enter the activation code.
How do I install and claim the Hub?
Connect the Hub to the LAN using the connection diagram below, then claim it in the OvrC location. Next, scan the LAN for other devices to claim and monitor.
How do I complete the network setup?
OvrC Pro is packed with features that make LAN setup and maintenance easier than ever: Scan and Monitor IP Devices, WebConnect GUI Access, Client Control with OvrC Home App, Internet Speed Test*, Monitor Control Systems, Location Dashboard
How do I configure OvrC Home?
Within the OvrC Pro-enabled location, go to the “OvrC Home Setup” tab and click the “Add Command” button to get started.
advertisement