Protec 6300 fire alarm system Operating manual
Oglas
Oglas
93-518-18 Issue 3 Rev 6 Page 1 of 25 Copyright Protec Fire Detection PLC
6300 OPERATING MANUAL
ISSUE DATE DETAILS OF CHANGE CHANGED
BY
3 Rev 5 15/09/03 PD
3 Rev 6 17/11/04 Update to software version 4.54 PD
Warning
This manual assumes that the Silence Alarms control button on your panel is positioned as
shown below. If this is not the case, please request the correct manual.
Previous
Mute
Next
Menu
Silence
Alarms
Reset Sound
Alarms
6300 OPERATING MANUAL
ISSUE DATE DETAILS OF CHANGE CHANGED
BY
3 Rev 5 15/09/03 PD
3 Rev 6 17/11/04 Update to software version 4.54 PD
Warning
This manual assumes that the Silence Alarms control button on your panel is positioned as
shown below. If this is not the case, please request the correct manual.
Previous
Mute
Next
Menu
Silence
Alarms
Reset Sound
Alarms
93-518-18 Issue 3 Rev 6 Page 2 of 25 Copyright Protec Fire Detection PLC
6300 OPERATING MANUAL
Table of Contents
OOVVEERRVVIIEEWW ........................................................................................................................................................ 4
1.1 CONTROL PANEL ................................................................................................................................... 4
1.2 DEVICES ................................................................................................................................................... 4
CCOONNTTRROOLL FFUUNNCCTTIIOONNSS .................................................................................................................................. 5
2.1 SYSTEM NORMAL .................................................................................................................................. 5
2.2 FIRE SIGNALS ......................................................................................................................................... 5
2.3 SILENCE ALARMS .................................................................................................................................. 5
2.4 RESETTING FIRE EVENTS .................................................................................................................... 6
2.5 SOUND ALARMS .................................................................................................................................... 6
2.6 TO ACCEPT THE CURRENT PANEL CONDITION .............................................................................. 6
UUSSEERR MMEENNUUSS ................................................................................................................................................... 7
PRINT PENDING EVENTS............................................................................................................................ 8
VIEW FAULTS ............................................................................................................................................... 8
VIEW DISABLEMENTS ................................................................................................................................ 8
IISSOOLLAATTIIOONN FFUUNNCCTTIIOONNSS ................................................................................................................................ 9
3.1 ISOLATING AN ADDRESS ................................................................................................................ 9
3.2 VIEWING THE ISOLATED ADDRESSES......................................................................................... 9
3.3 ISOLATING A ZONE ........................................................................................................................ 10
3.4 VIEWING THE ISOLATED ZONES ................................................................................................ 10
3.5 OUTPUT DELAY(s) .......................................................................................................................... 10
3.6 CLEARING ALL ISOLATIONS........................................................................................................ 11
3.7 FIRE LINK DISABLEMENT / ENABLEMENT ............................................................................... 11
SSEETT TTIIMMEE && DDAATTEE .......................................................................................................................................... 12
CCLLEEAARRIINNGG SSYYSSTTEEMM FFAAUULLTT // CCHHAANNGGEE .................................................................................................... 12
AADDVVAANNCCEEDD OOPPTTIIOONNSS ................................................................................................................................... 13
6.1 PRINTER FUNCTIONS ..................................................................................................................... 13
6.1.1 PRINTING ANALOGUE VALUES ............................................................................................................. 14
6.1.2 DEVICES RETURNING ANALOGUE VALUES OUTSIDE A CERTAIN RANGE ................................ 15
6.1.3 PRINTING THE EVENT LOG..................................................................................................................... 16
6.1.4 PRINTING CURRENT EVENTS ................................................................................................................. 16
6.1.5 PRINTING DEVICE DATA ......................................................................................................................... 17
6.1.6 PRINTING THE PROGRAM MATRIX....................................................................................................... 18
6.1.7 PRINTING THE DELAY DATA ................................................................................................................. 19
6.1.8 CANCELING THE PRINTOUT ................................................................................................................... 19
6.2 VIEWING THE EVENT LOG............................................................................................................ 20
6.3 VIEWING ANALOGUE VALUES .................................................................................................... 21
6.4 VIEWING ADDRESS TEXT ............................................................................................................. 21
6300 OPERATING MANUAL
Table of Contents
OOVVEERRVVIIEEWW ........................................................................................................................................................ 4
1.1 CONTROL PANEL ................................................................................................................................... 4
1.2 DEVICES ................................................................................................................................................... 4
CCOONNTTRROOLL FFUUNNCCTTIIOONNSS .................................................................................................................................. 5
2.1 SYSTEM NORMAL .................................................................................................................................. 5
2.2 FIRE SIGNALS ......................................................................................................................................... 5
2.3 SILENCE ALARMS .................................................................................................................................. 5
2.4 RESETTING FIRE EVENTS .................................................................................................................... 6
2.5 SOUND ALARMS .................................................................................................................................... 6
2.6 TO ACCEPT THE CURRENT PANEL CONDITION .............................................................................. 6
UUSSEERR MMEENNUUSS ................................................................................................................................................... 7
PRINT PENDING EVENTS............................................................................................................................ 8
VIEW FAULTS ............................................................................................................................................... 8
VIEW DISABLEMENTS ................................................................................................................................ 8
IISSOOLLAATTIIOONN FFUUNNCCTTIIOONNSS ................................................................................................................................ 9
3.1 ISOLATING AN ADDRESS ................................................................................................................ 9
3.2 VIEWING THE ISOLATED ADDRESSES......................................................................................... 9
3.3 ISOLATING A ZONE ........................................................................................................................ 10
3.4 VIEWING THE ISOLATED ZONES ................................................................................................ 10
3.5 OUTPUT DELAY(s) .......................................................................................................................... 10
3.6 CLEARING ALL ISOLATIONS........................................................................................................ 11
3.7 FIRE LINK DISABLEMENT / ENABLEMENT ............................................................................... 11
SSEETT TTIIMMEE && DDAATTEE .......................................................................................................................................... 12
CCLLEEAARRIINNGG SSYYSSTTEEMM FFAAUULLTT // CCHHAANNGGEE .................................................................................................... 12
AADDVVAANNCCEEDD OOPPTTIIOONNSS ................................................................................................................................... 13
6.1 PRINTER FUNCTIONS ..................................................................................................................... 13
6.1.1 PRINTING ANALOGUE VALUES ............................................................................................................. 14
6.1.2 DEVICES RETURNING ANALOGUE VALUES OUTSIDE A CERTAIN RANGE ................................ 15
6.1.3 PRINTING THE EVENT LOG..................................................................................................................... 16
6.1.4 PRINTING CURRENT EVENTS ................................................................................................................. 16
6.1.5 PRINTING DEVICE DATA ......................................................................................................................... 17
6.1.6 PRINTING THE PROGRAM MATRIX....................................................................................................... 18
6.1.7 PRINTING THE DELAY DATA ................................................................................................................. 19
6.1.8 CANCELING THE PRINTOUT ................................................................................................................... 19
6.2 VIEWING THE EVENT LOG............................................................................................................ 20
6.3 VIEWING ANALOGUE VALUES .................................................................................................... 21
6.4 VIEWING ADDRESS TEXT ............................................................................................................. 21
93-518-18 Issue 3 Rev 6 Page 3 of 25 Copyright Protec Fire Detection PLC
6300 OPERATING MANUAL
6. 5 DISABLE OUTPUTS ........................................................................................................................ 22
6. 6 LAMP TEST ...................................................................................................................................... 22
6.7 WALK TEST ...................................................................................................................................... 22
EEXXCCHHAANNGGEE DDEEVVIICCEESS ................................................................................................................................... 23
AAPPPPEENNDDIIXX AA -- KKEEYY TTOO AANNAALLOOGGUUEE VVAALLUUEESS .......................................................................................... 25
ANALOGUE DEVICE THRESHOLD LEVELS ......................................................................................... 25
DIGITAL DEVICE THRESHOLD LEVELS ................................................................................................ 25
6300 OPERATING MANUAL
6. 5 DISABLE OUTPUTS ........................................................................................................................ 22
6. 6 LAMP TEST ...................................................................................................................................... 22
6.7 WALK TEST ...................................................................................................................................... 22
EEXXCCHHAANNGGEE DDEEVVIICCEESS ................................................................................................................................... 23
AAPPPPEENNDDIIXX AA -- KKEEYY TTOO AANNAALLOOGGUUEE VVAALLUUEESS .......................................................................................... 25
ANALOGUE DEVICE THRESHOLD LEVELS ......................................................................................... 25
DIGITAL DEVICE THRESHOLD LEVELS ................................................................................................ 25
93-518-18 Issue 3 Rev 6 Page 4 of 25 Copyright Protec Fire Detection PLC
6300 OPERATING MANUAL
OOVVEERRVVIIEEWW
The 6300 panel drives up to four digital addressable loops with up to 191 addresses each. However the
number of detection devices and manual call points must be limited to a maximum of 512 in order to comply
with En54 part 2.
An addressable fire alarm system can pinpoint the location of an activated device because each device is
associated with an address. The advantage of an addressable system is that up to 191 different addresses are
possible on the same pair of wires. Each address is assigned to any of the zones available, zoning is done on
site by the commissioning engineer.
1.1 CONTROL PANEL
On the 6300 panel, all user control functions mentioned in this document are accessible after opening the
lockable windowed door.
The 6300 panel communication capabilities enable it to be connected to other 6300 panels through a secure
network. Alternatively, the 6300 panel can be used as a standalone panel. In either case repeat panels can be
connected to the system.
1.2 DEVICES
A digital addressable loop uses sensors instead of trigger devices. There are several different types of digital
addressable sensors available. For a list of available devices refer to appendix A.
6300 OPERATING MANUAL
OOVVEERRVVIIEEWW
The 6300 panel drives up to four digital addressable loops with up to 191 addresses each. However the
number of detection devices and manual call points must be limited to a maximum of 512 in order to comply
with En54 part 2.
An addressable fire alarm system can pinpoint the location of an activated device because each device is
associated with an address. The advantage of an addressable system is that up to 191 different addresses are
possible on the same pair of wires. Each address is assigned to any of the zones available, zoning is done on
site by the commissioning engineer.
1.1 CONTROL PANEL
On the 6300 panel, all user control functions mentioned in this document are accessible after opening the
lockable windowed door.
The 6300 panel communication capabilities enable it to be connected to other 6300 panels through a secure
network. Alternatively, the 6300 panel can be used as a standalone panel. In either case repeat panels can be
connected to the system.
1.2 DEVICES
A digital addressable loop uses sensors instead of trigger devices. There are several different types of digital
addressable sensors available. For a list of available devices refer to appendix A.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
Oglas
Povezano
Protec Algo-Tec 6300 Operating Manual
Protec 3200 CONTROL PANEL User Manual
Protec Algo-Tec 6500/6600 USER MANUAL
Protec Algo-Tec 6300 Operating Manual
Protec Algo-Tec 6400 Operating Manual
Protec Algo-Tec 6400 Operating Manual
EMS FirePoint System 5000 User manual
Protec Algo-Tec 6400 Quick Operating Manual
Protec Algo-Tec 6600 User Manual - Fire Alarm Control Panel
Fire Alarm Control Panel Mx 4100, Mx 4200, Mx 4400 User Manual
