Hotpoint NT M10 81 EU Setup and user guide

Show PDF Add to My manuals
4 Pages

advertisement

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.hotpoint.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identifi cation plate.
THANK YOU FOR BUYING A HOTPOINT ARISTON PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.hotpoint.eu/register
ENQuick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx

PROGRAMMES

1.Mixed kg 4 Time 106'

This programme is ideal for drying cotton and synthetic fabrics

together.

2.Eco cotton kg Max* Time 215'

Standard cotton programme, suitable to dry normally wet

cotton laundry. Most efficient programme in terms of energy

consumption for drying cotton laundry. The values on the Energy

Label are based on this programme.

3.Synthetics kg 4 Time 96'

This programme is suitable for synthetic garments or cotton

blends/synthetic.

4.Wool kg 1 Time 62'

Programme for drying wool clothing. It is advisable to turn the

garments inside out before drying. Leave to dry naturally the heaviest

edges that are still damp.

5.Silk
kg 0,5 Time 66'
Gentle drying of silk garments.

6.Anti Allergy kg Max*
Time 252'
This cycle has the “Allergy UK” approval of “The British Allergy

Foundation” attesting the effective reduction and elimination of

allergens. It can be used both with damp load (drying and treatment)

and dry load (half load only).

7.Daily
kg 2 Time 140'
Ideal for drying garments of cotton blends or synthetics spun at

high speed in the washing machine.

8.Cuddly toys Kg 2,5 Time 220'

The cycle preserves the original appearance and brilliance of the cuddly

toys at best. Remove all accessories before proceeding with drying.

Every single piece must not exceed 600 gr.

FIRST TIME USE

Make sure that the water tank is correctly inserted. Make sure

that the drain hose on the back of the dyrer is properly fixed,

either to the dryers's water tank or to the domestic sewage

system.

The dryer should be installed in environment in a room

temperature range of 20°to 23°C for optimum performance. But

will function if the room is between 14 and 30°C. Before you use

your dryer ensure that it has been in a upright position for at

least 6 hours.

Should you wish to change the opening side of the door, please

contact our After-sales Service.
(See phone number in the
warranty booklet).

DAILY USE

Doing this will keep your machine working at its BEST!

Remember to empty your water tank after each drying cycle.

Remember to clean your filters after each drying cycle. (Refer to

section Care & Maintanence).

1.
Open the door and load garments. Always refer to instructions
on clothing labels and the max loads indicated in the programme

section. Empty pockets. Make sure garments do not get caught

between the door and/or the door filter.

2.
Close the door.
3.
Press the button On/Off.
4.
Select the programme according to the laundry type.
5.
Select the options, if necessary.
6.
To start the cycle, press the Start/Pause button.
7.
At the end of the drying cycle, a buzzer will beep. An indicator on
the control panel signals the end of the cycle. Pull the load out

immediately to prevent the formation of creases on laundry.

8.
Turn the machine off by pressing the button On/Off, open the
door and pull clothing out. If the machine is not switched off

manually, after about a quarter of an hour from the cycle end, the

appliance turns off automatically to save energy.

If this last stage is not carried out immediately, some machines

and/or some programmes/options are equipped with Crease Care

system. For some hours, after the end of drying, the drum rotates

at regular intervals to prevent the formation of creases.

In case of power failure, it is necessary to press the button Start/

Pause to restart the cycle.

OPENING OF THE DOOR DURING THE CYCLE

During operation, it is possible to open the door. After having

closed it, press the button Start/Pause again to restart the dryer.

*MAX LOAD 8 Kg
(Dry load)
CARE LABEL
Always check the care labels, especially when placing garments in
the tumble dryer for the first time. Below are the most commonly
used symbols:
May be tumble dried.
Do not tumble dry.
Tumble dry – high heat.
Tumble dry – low heat.

1
3
2
9
7
8
4 5 6
3“
60’
30’ 1h
3h
6h
9h
90’
120’
180’
h
END
DEMO

CONTROL PANEL

1
On/Off button (Reset if long pressed)
2
Programme selection Knob
3
Start/Pausa
Options Buttons*

4
Dryness level
5
Timed Drying
6
Start Delay
7
Gentle
8
Crease Care (if long pressed Key Lock)
9
Cycle End
*Note: some models may have the wording in full instead of the icons

INDICATORS

Dryness Level:
Iron Dry - Hanger Dry - Cupboard Dry - Extra Dry
Cycle Phase:
Drying - Cool Down - END End of Cycle
Empty Water tank
- Clean Door filter - Clean Bottom filter -
Refer to Troubleshooting Section:
Failure: Call after Sales Service. DEMO Demo Mode
OPTIONS BUTTONS
These buttons serves to personalise the selected programme

according to personal requirements.

Not all options are available for all programmes. Some options

are incompatible with the ones previously set. The buzzer and/or

blinking indicators will signal the incompatibility. If the option is

available, the option indicator will stay on. Some options may be

kept in the memory of the programme if selected in the previous

drying.

9.Refresh

A short programme suitable for refreshing fibres and

garments by means of fresh air. Do not use with garments that are

still wet. It can be used on with any load size but is more effective

with small loads. The cycle duration is about 20 minutes.

10.Duvet
Time 179'
Programme intended to dry bulky garments, as single duvet.

11.Bed & Bath Kg Max* Time 240'

This programme is intended for drying cotton towels and

sheets.

12.Fitness Kg 4 Time
96''
For drying sports garments made of synthetics or cotton.

13.Baby kg 2 Time 107'

A programme intended to dry garments and linen of new-

born babies (cotton and chenille), as well as delicate garments.

Do not dry garments having plastic covering.

14.Jeans kg 3 Time 127'

For drying cotton jeans-wear and garments made of robust

cotton, like denim, such as trousers and jackets.

15.Shirts kg 3 Time 137'

This is a programme for Shirts made from cotton or cotton

blend/synthetics.

OPTIONS

After selecting the programme, the various options can be

set, if necessary

Active care

This function allows to preserve the original appearance and

brilliance of your garments at best, by controlling the motor

speed, the rotation of the drum, and the temperature.

Dryness Level

Press the related button several times to obtain a different

level of residual moisture on garments. An indicator signals the

level being selected.

Iron Dry:
a very delicate ironing. Suitable for making ironing
of garments easier immediately after the end of the cycle.

Hanger Dry:
a level intended for delicate garments ready to
be hanged.

Cupboard Dry:
the garments are ready to be folded and put
away.

Extra Dry:
used for garments to be worn at the end of the
cycle.

h
Start Delay
This option allows you to set the delay of the cycle start. Press

the corresponding button several times to obtain the required

delay. After having reached the max. settable time, the option is

reset by pressing the button again. An indicator on the control

panel signals the time being selected. After having pressed the

button Start/Pause, the machine signals the remaining time

for the cycle start. In case of door opening, after closing, it is

necessary to press the button Start/Pause.

Timed drying

This option allows to set the drying time. Press the

corresponding button to set the required time for drying. After

having reached the max. settable time, a further pressure of the

button resets the option. An indicator on the control panel signals

the time being selected.

Cycle End

This option activates a prolonged buzzer at the end of the

cycle. Enable it if you are not sure to hear the normal sound at the

end of the cycle. This option remains in memory if selected in the

previous drying.

Gentle

Enables a more gentle treatment of the laundry by reducing the

drying temperature.

Key Lock

This option makes all machine controls inaccesible, except the

button On/Off. When the machine is on:

to activate the option, keep the button pressed until the
indicator goes on.

to disable the option, keep the button pressed until the
indicator goes off. This option remains in memory if selected in

the previous drying.

Crease Care

This option add a crease treatment at the end of the cycle

by means of a periodic rotation of the drum (duration up to 10

hours). It is particularly suitable when it is not possible to remove

the laundry as soon as the drying ends. If this option is used

together with the Start Delay, the crease treatment is added

also in the Start Delay phase. This option remains in memory if

selected in the previous drying.

The duration of these programs will depend on the size of the

load, types of textiles, the spin speed used in your washer and

any extra options selected.
In machines equipped with display,
the duration of the cycles is shown on the control panel.
The
remaining time is constantly checked and adjusted during the

drying cycle to show the best possible estimate.
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.hotpoint.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identifi cation plate.
THANK YOU FOR BUYING A HOTPOINT PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.hotpoint.eu/register
ENQuick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx

CARE AND MANTENANCE

Unplug the dryer during the cleaning and maintenance

procedures.

Emptying the water tank after each cycle (see Fig. A).

Pull the container out of the dryer and and empty it into a sink

or other suitable drain, then place it back. Do not use the dryer

without having inserted the container back in place.

Cleaning the door filter after each cycle (see Fig. B).

Pull the filter out and clean it by removing the lint from the filter

surface under running water or using a vacuum cleaner. Do not

use the dryer without having reinserted the filter in place.

Remove the door filter as described below:

1. Open the door and pull upwards.

2. Open the filter and

remove lint from all its parts. Replace it correctly.

Ensure it is completely inserted flush with the dryer seal.

Cleaning the bottom filter when the relevant indicator

turns on (see Fig. C).

Pull the filter out and remove the lint from its surface by

washing it under runing water or by using a vacuum cleaner.

However, it is advisable to clean this filter after each cycle to

optimise drying performance.
Do not use the dryer without
having inserted the filter in place first.

Remove the bottom filter as described below:

1. Open the lower door.

2. Take the handle and pull the lower filter out.

3. Open the rear side of the filter and remove the lint from the

inner surface of the mesh.

4. Clean the bottom filter chamber avoiding the direct contact

with the leaves.

5. Close the rear side of the lower filter and place it back by

checking it is perfectly integrated in place.

6. Lower the filter handle and close the bottom door.

7. Make sure the air intake is free.

The filters are essential parts for drying. They are intended

to collect the lint formed during drying process. In case

of clogged filters, the air flow inside the dryer would be

seriously affected: the drying times would be longer, the

energy consumption would increase and the dryer could be

damaged. If these procedures are not carried out properly,

the dryer may not start.

PRODUCT DESCRIPTION

1.
Water bottle
2.
Air Intake
3.
Bottom filter
4.
Door filter
TRANSPORT AND HANDLING

Never lift the dryer by holding it at the worktop.

1. Unplug the dryer.

2. Make sure that door and water tank are properly closed.

3. If the drain hose is connected to your sewage system, fix the

drain hose on the rear of the dryer again (see Installation Guide).

Power consumption

off-mode (Po) - Watts
0.50
left-on mode (Pl) - Watts
1.00
Programs
Kg kWh Minutes
Eco Cotton *
8 2.53 215
Eco Cotton
4 1.39 127
Synthetics
4 1.18 116
*This is the reference programme for the energy label and suitable to

dry normal wet cotton laundry. This is the most efficient programme

in terms of energy consumption for drying wet cotton laundry.

(Standard/Default starting configuration)

Heat Pump System

The heat pump contains fluorinated greenhouse gases,

contained in a hermetically sealed unit. This sealed unit contains

0.15
kg of the F gas R134a. GWP = 1430 (1 t CO2).
A B
1
4 2
3
C
You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:
Visiting our website - docs.hotpoint.eu
Using QR Code
Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product’s identifi cation plate.
THANK YOU FOR BUYING A HOTPOINT ARISTON PRODUCT.
In order to receive a more complete assistance,
please register your product on
www.hotpoint.eu/register
ENQuick guide
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx
Before using the appliance carefully read the Safety Instructions.
xxxxxxxxxxxx
xxxx

TROUBLESHOOTING
Before contacting the Service Centre, refer to the table below. Often the malfunctions are minor and can be solved in few minutes
Malfunction Possible cause Solution
The tumble
dryer does not
turn on.
The plug is not inserted into the socket. Insert the plug into the socket.
The plug is faulty. Try to plug another appliance in the same socket. Do not use
connecting electrical devices to the socket, as adapters or extensions
A power failure occurred. Await the reactivation of the power supply.
The tumble
dryer does not
start
The door is open. Close the door.
A time delay for the cycle start was set. For machines equipped with this function: await the end of the delay
set or switch the machine off to reset it. Refer to the section Options.
The button Start/Pause was not pressed to start
the program. Press the button Start/Pause.
The function Key Lock was enabled (in case of
machines equipped with this option). Refer to the option section and, if the Key Lock is present, disable it.
Switching the machine off is not enough to disable this option.
The drying
times are very
long
An appropriate maintenance was not carried
out. Refer to the section Care & Maintenance and perform the operations
described.
The programme, the time and/or the drying
level set are not suitable for the type and the
amount of load inserted into the dryer.
Refer to the section programmes and options to fi nd the programme
and the options most suitable for the type of load.
The garments are too wet. Carry out a washing cycle with higher spin speed to remove as much
water as possible.
The dryer may be overloaded. Refer to the programme section to check the max. load for each
programme.
The programme
did not end. A power failure occurred might have occurred. In case of power failure, it is necessary to press the button Start/Pause
to restart the cycle.
Lights on or fl ashing
Water tank The water tank is full. Emtpy the water tank. Refer to the section Care & Maintenance.
Door fi lter
and/or bottom
fi lter*
Failure of the air fl ow necessary for machine
operation.
Clean the door fi lter and the bottom one and check whether air
intake is free. Carrying out these operations improperly may cause
damages.
Bottom filter* The bottom fi lter requires cleaning. Clean the bottom fi lter. Refer to section Care & Maintanence.
DEMO
The cycle lasts
few minutes.
The dryer is in DEMO mode. The DEMO
indicator is on.
Disable the DEMO mode. The following actions must be carried out
in sequence, without breaks. Switch the machine on and then switch
it off again. Press the Start/Pause button until the buzzer is heard.
Switch the machine on again. The “DEMO” indicator flashes and then
turns off.
The presence
of wrench
symbol signals a
malfunction.
The machine sensors detected a failure.
Switch the dryer off and unplug it. Open the door immediately and
pull laundry out, to allow the heat to dissipate. Wait for about 15
minutes. Reconnect the dryer to the power supply, load the laundry
and restart the drying cycle. If the problem still occurs, contact
the After-Sales Service Centre and communicate the letters and
digits fl ashing on the display.
For instance: F3 and E2
*Note: some models are self-cleaning and not equipped with bottom fi lter. Please refer to the section Care & Maintenance.

The presence of wrench symbol signals a malfunction. Carry out the operations described.
Switch the dryer off and unplug it. Open the door immediately and pull landry out, to allow
the heat to dissipate. Wait for about one hour. Reconnect the dryer to the power supply, load
the laundry and restart the drying cycle.
If the problem still occurs, contact the After-Sales Service Centre and communicate the
number and the position of the fl ashing LEDs, starting from the bottom and the left column.
e.g.:
First, left column, LEDs No. 1 and 3 on.
Central column, LED No. 1 on.
60’
30’ 1h
3h
6h
9h
90’
120’
180’
h
END
DEMO
  • Page 1
  • Page 2
  • Page 3
  • Page 4
/

advertisement

Key Features

  • Freestanding Front-load 8 kg 120 L White
  • Heat pump
  • Number of drying programs: 15
  • LED Built-in display
  • Moisture sensor Delayed start timer
  • Energy efficiency class: A+
  • 850 W 308 kWh 67 dB

Related manuals

Frequently Answers and Questions

How do I prevent my clothes from shrinking in the dryer?
Use the sensor drying technology to ensure that your clothes are dried to the perfect level, preventing over-drying and shrinkage.
How do I remove wrinkles from my clothes?
Use the anti-crease function, which gently tumbles your clothes at the end of the cycle to prevent wrinkles and creases.
Can I delay the start of the drying cycle?
Yes, you can use the delay start function to set the dryer to start at a later time, so you can take advantage of off-peak energy rates.

advertisement