Sea Ray 2006 58 SEDAN BRIDGE Owners Manual

PDF Download
Document
Sea Ray 2006 58 SEDAN BRIDGE Owners Manual | Manualzz

Advertisement

Advertisement

58 Sedan Bridge
(585 Sedan Bridge) I
Congratulations on becoming the new owner of the world’s
most prestigious boat. We at Sea Ray ® Boats, Inc.
welcome you into our worldwide and ever-expanding
family of boating enthusiasts.
The Owner’s Manual Packet, to be kept on board your
Sea Ray, gives you important information on all the
features of your Sea Ray, for years of trouble-free boating
take the time to carefully review the information in your
Owner’s Manual Packet and really get to know your boat.
Have everyone who will operate your boat read this
manual.
The Owner’s Manual Packet contains the following:
Owner’s Manual: The Owner’s Manual gives you
important operating and safety information, as well
as reminding you about your responsibilities as a
boat owner/operator.
Original Equipment Manufacturer (OEM)
Information: This section of your Owner’s Manual
Packet contains information from the manufacturers
of equipment installed on your boat. Examples
include the engine, engine control and steering
system. Throughout the Owner’s Manual you will be
referred to information provided by manufacturers of
specific systems.
Because your purchase represents a substantial
investment, we know you will want to take the necessary
measures to protect its value. We have outlined a program
for proper operation, periodic maintenance and safety
inspections. We urge you to follow these recommendations.
If you have questions which are not fully covered by the
Owner’s Manual Packet, please consult your authorized
dealer for assistance.
Thank You For Selecting A Sea Ray®
!
Bon Voyage
WELCOME
Owner’s Manual
58 Sedan Bridge
International • 585 Sedan Bridge
58 Sedan Bridge
(585 Sedan Bridge)II
THIS PAGE LEFT INTENTIONALLY BLANK
58 Sedan Bridge
(585 Sedan Bridge) III
INTRODUCTION
1. T HIS M ANUAL
The material here and in the rest of the Owner’s Manual
Packet:
Gives you basic safety information;
Describes the features of your boat;
Describes the equipment on your boat;
Describes the fundamentals of boat use; and
Contains service and maintenance information.
You must learn to operate this boat as well as
read, understand and use this manual.
What this manual does not give you is a course in
boating safety, or how to navigate, anchor or dock
your boat. Operating a power boat safely requires more
skills, knowledge and awareness than is necessary
for a car or truck.
2. Y OUR R ESPONSIBILITIES
For your safety, the safety of your passengers, other
boaters and people in the water, you must:
Take a boating safety course;
Get instruction in the safe and proper handling
of your boat;
Understand and follow the “rules of the road”;
Learn how to navigate.
3. S OURCE OF I NFORMATION
In North America, contact one of the following for boat-
ing courses:
U.S. Coast Guard Auxiliary
U.S. Power Squadron
Canadian Power and Sail Squadrons
Red Cross
State Boating Offices
Yacht Club
Contact your dealer or the Boat/U.S. Foundation at
1-800-336-2628
Outside of North America, contact your boat dealer
and/or your governmental boating agency for assis-
tance.
A book that provides a comprehensive background
in boating is Chapman - Piloting, Seamanship and
Small Boat Handling, by Elbert S. Maloney, published
by Hearst Marine.
4. D EALER R ESPONSIBILITIES
In addition to a pre-delivery check and service of the
boat, your dealer is to give you:
A description and demonstration of the safety
systems, features, instruments and controls on
your boat;
An orientation in the general operation of your
boat;
An “In Service Form” completed by you and the
dealer after your inspection of the boat;
A review of all warranty information and how to
obtain warranty service;
The complete Owner’s Manual Packet.
If you do not receive all of these materials, or have any
questions, contact your dealer or call: 1-800-SRBOATS
(International 1-314-216-3333).
5. W ARRANTIES
Your boat comes with several warranties. Each com-
ponent and/or system on your boat has its own war-
ranty that will be found with the specific information
and manual for that component. These are included
with your Owner’s Manual Packet. Locate and read
the individual warranties; then put them together for
easy future reference. The Sea Ray® warranty is on
the warranty information card in your packet.
58 Sedan Bridge
(585 Sedan Bridge)IV
6. H ULL I DENTIFICATION N UMBER
(HIN)
The “Hull Identification Number” located on the star-
board side of the transom, is the most important iden-
tifying factor and must be included in all correspon-
dence and orders. Failure to include it creates delays.
Also of vital importance are the engine serial num-
bers and part numbers when writing about or order-
ing parts for your engine. Refer to the Engine
Operator’s Manual for locations of engine serial num-
bers and record them for future reference.
H.I.N L OCATIONS
(FIG. IV)
TYPICAL HIN LOCATION
WITHIN 2" OF THE
GUNWALE
7. M ANUFACTURER S C ERTIFICATION
As a boat manufacturer, Sea Ray builds their
products to guidelines established under the Federal
Boat Safety Act of 1971. The Act is promulgated by
the United States Coast Guard who has authority to
enforce these laws on boat manufacturers that sell
products in the United States. Sea Ray ensures
that all of its products comply with these laws.
The NMMA, National Marine Manufacturers
Association, provides Sea Ray with a third party
certification. The NMMA is an organization that
represents the marine industry and assists
manufacturers, boat dealers, marinas, repair yards
and component suppliers in areas of legislation,
environmental concerns, marine business growth
and state and federal government agency
interaction. The third party certification that Sea Ray
participates in, uses the well know Standards and
Recommended Practices of the ABYC, American
Boat and Yacht Council.
Sea Ray Boats participates extensively in the
American Boat and Yacht Council which is a non-
profit organization that develops and publishes
voluntary standards and recommended practices
for boat and equipment design, construction, service
and repair. We utilize all applicable ABYC standards
in the construction of your Sea Ray boat.
Finally, Sea Ray sells their products world wide and
as such must conform to the various rules and
regulations required by other countries. Most
notably, are the ISO standards in Europe which
require the application of the CE (Common
European) mark. This mark, much like the NMMA
certification here in the US, gives you the boat owner
specific information concerning your craft. For more
on this, turn to Section 1 • Safety, subsections 8
and 13 which explains in detail the CE plate and its
importance.
INTRODUCTION
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222

Advertisement

Preparing document for printing…
0%