Altec Lansing ABT385 Power Duo Tower Speaker Set Guide

Show PDF Add to My manuals
1 Pages


SET (ABT385)
To connect the satellite speaker to the main speaker:
1. The cable attached to your satellite speaker has TWO plugs.
The RCA plug connects to the OUTPUT port and the AUX cable
connects to the LIGHT port on the main speaker.
2. Plug in the connected POWER cable on the satellite speaker to
an available outlet in your home.
3. Press the power button on the included remote to turn the speakers
on. You will hear two (2) quick beeps indicating the speakers are on.
To connect your smartphone device to the speakers
via Bluetooth:
1. Make sure the satellite speaker and main speaker are
connectedtogether and the speakers are plugged into a
power source.
2. Press the BT button on your remote control to enter
Bluetooth mode.
3. Go to the settings on your smartphone/device.
4. Select Bluetooth Manager and choose ABT385.
Once connected, you will hear one (1) beep. This indicates
your smartphone/device is paired.
5. Adjust the volume by pressing the + or - buttons on the
main speaker or the remote control. To change the music
track press the (forward) and (backward) buttons on
remote control.
6. To change the color of the lights, press the LIGHTS button
on the remote control.
7. To change the bass and/or treble levels, press the TONE
button on the speaker and then select the + to increase or
the - to decrease.
  • Page 1


Key Features

  • Powerful audio
  • Bluetooth connectivity
  • Remote control
  • Color changing lights
  • Satellite speaker

Related manuals

Frequently Answers and Questions

How do I connect the satellite speaker to the main speaker?
The satellite speaker has a cable with two plugs - an RCA plug for the OUTPUT port and an AUX cable for the LIGHT port on the main speaker. Connect these plugs and plug the satellite speaker into a power outlet.
How do I pair my phone with the speakers?
Press the BT button on the remote control, go to the Bluetooth settings on your phone, and select ABT385.
How do I change the bass or treble levels on the speaker?
Press the TONE button on the main speaker and then use the + or - buttons to adjust the levels.