Align 500D Power Table Feed Owner Manual

Show PDF Add to My manuals
13 Pages

advertisement

5
6
7
8
9
10
11
12
13
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Page 5
  • Page 6
  • Page 7
  • Page 8
  • Page 9
  • Page 10
  • Page 11
  • Page 12
  • Page 13
/

advertisement

Key Features

  • Transformer is used for 220V, 240V, 380V and 415V then transfer to 110V.
  • It has a rated torque of 560 in-lb and a rated current of 1Amp.
  • It has a speed control knob to control the rotating speed of the power feed.
  • It has an anti-vandal switch with an indicator LED that lights up when the power is on.
  • It has a circuit breaker to protect the circuit from current overload.
  • It has a travel stop and a travel stop set to control the movement of the power feed.

Related manuals

Frequently Answers and Questions

What is the maximum drive RPM of the Align 500D?
The maximum drive RPM of the Align 500D is 270.
What is the rated gear ratio of the Align 500D?
The rated gear ratio of the Align 500D is 21.4:2.8:1.
What is the voltage rating of the Align 500D?
The voltage rating of the Align 500D is 110V 50/60Hz.
What should I do if the Align 500D does not work and the indicator does not glow?
Ensure there is no problem with power supply, check if the circuit breaker on the power feed unit kicked out, and check for proper contact at the ON-OFF switch.

advertisement