Ohlins YA762 Shock Absorber for YAMAHA Tricity Mounting Instruction

Show PDF Add to My manuals
12 Pages

advertisement

Shock Absorber for YAMAHA Tricity
YA 762

Mounting Instructions

Note!

Please note that this image is a general representation

of the product and may differ slightly from your product.

Note!

Please note that during storage and transportation,

especially at high ambient temperature, some of the oil

and grease used for assembling may leak and stain the

packaging. This is in no way detrimental to the product,

wipe off the excessive oil/grease with a cloth.

Note!

Before installing this product, check the contents of the

kit. If anything is missing, please contact an Öhlins dealer

.

Warning!

Before installing this product, read the Öhlins Owner’s

Manual. The shock absorber is an important part of your

vehicle and will affect the stability.

Kit Contents

Description
Part No Pcs
Shock absorber
YA110013 2
O-ring
00438-01 4
Spacer 20x10x4
60020-01 2
Spacer 20x12x4
60020-02 2
Sticker Öhlins
00192-01 2
Tool preload adjuster
03199-03 1
Owners manual
07241-02 1
2MOUNTING INSTRUCTIONS
1

Put the motorcycle on the center stand so that

the rear wheel barely touches the ground. Make

sure the motorcycle is in a stable position.

Warning!

It is advisable to have an Öhlins dealer install the shock

absorber.

Warning!

If working on a raised vehicle, ensure it is securely

supported so that it will not tip over.

Note!

Before mounting this product clean the vehicle

thoroughly.

Note!
When working on this product, always see the Vehicle
Service Manual for vehicle specific procedures and

important data.

2

Open the passenger seat and remove the

fuse cover (1). Then loosen the nut (2).

1

2
3MOUNTING INSTRUCTIONS
3

Release the storage compartment by loosening

the four screws (1)(2)(3)(4). Then remove

the fuel tank cap (5) and lift up the storage

compartment.

Close the fuel tank cap.

1
25
4

3
4MOUNTING INSTRUCTIONS
5

Remove the grab bar by loosening the ten

screws (1)(2)(3)(4)(5)(6)(7)(8)(9)(10).

5

10

6
7
8

9

1
2 3 4
4

Remove the center rear cowl by loosening the

two screws (1)(2).

1
2
5
6
7
8
9
10
11
12
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Page 5
  • Page 6
  • Page 7
  • Page 8
  • Page 9
  • Page 10
  • Page 11
  • Page 12
/

advertisement

Key Features

  • Adjustable spring preload allows you to fine-tune the suspension for your weight and riding style.
  • Compression adjuster allows you to adjust the damping force to suit your riding conditions.
  • High-quality construction and materials ensure long-lasting performance and durability.
  • Easy to install and adjust, so you can get the most out of your suspension.
  • Specifically designed for the Yamaha Tricity, so you can be sure of a perfect fit and performance.

Related manuals

Frequently Answers and Questions

What are the benefits of installing an Öhlins shock absorber?
Öhlins shock absorbers offer a number of benefits over stock shocks, including improved damping and control, reduced body roll, and a more comfortable ride.
How do I adjust the spring preload on my Öhlins shock absorber?
To adjust the spring preload, use the included tool to turn the adjuster ring on the shock body.
How do I adjust the compression damping on my Öhlins shock absorber?
To adjust the compression damping, use the included tool to turn the adjuster knob on the shock body.
What is the recommended spring preload setting for my Öhlins shock absorber?
The recommended spring preload setting is 10 mm.
What is the recommended compression damping setting for my Öhlins shock absorber?
The recommended compression damping setting is 10 clicks.

advertisement