Protec 6100 User Manual
Annons
Annons
Protec Fire Detection plc, Protec House, Churchill Way, Nelson, Lancashire, BB9 6RT, ENGLAND
+44 (0) 1282 717171 www.protec.co.uk [email protected]
6100 SINGLE LOOP DIGITAL
ADDRESSABLE FIRE ALARM
CONTROL PANEL
USER MANUAL
+44 (0) 1282 717171 www.protec.co.uk [email protected]
6100 SINGLE LOOP DIGITAL
ADDRESSABLE FIRE ALARM
CONTROL PANEL
USER MANUAL
N93-571-87 Issue 5 NH Page 2 of 34 © Protec Fire Detection plc 2019
Document Revision Details
Issue Modification Detail Author Date
0 Document Creation NH 15/11/2011
1 Section 14.0 amended, miscellaneous text tidied NH 17/01/2012
2 Refer to ECN3414 NH 10/10/2013
3 Addition of WEEE data in section 1.0 NH 22/06/2014
4 Refer to ECN3729 NH 14/07/2015
5 Update to BS5839 references
Refer to ECN4363 NH 16/05/2019
Document Revision Details
Issue Modification Detail Author Date
0 Document Creation NH 15/11/2011
1 Section 14.0 amended, miscellaneous text tidied NH 17/01/2012
2 Refer to ECN3414 NH 10/10/2013
3 Addition of WEEE data in section 1.0 NH 22/06/2014
4 Refer to ECN3729 NH 14/07/2015
5 Update to BS5839 references
Refer to ECN4363 NH 16/05/2019
N93-571-87 Issue 5 NH Page 3 of 34 © Protec Fire Detection plc 2019
Table of Contents
1.0 INTRODUCTION .................................................................................................................................... 5
2.0 USER RESPONSIBILITIES ................................................................................................................... 6
2.1 Requirements of the Premises Management Named Person ......................................................... 6
3.0 ROUTINE TESTING OF THE SYSTEM ................................................................................................. 7
3.1 Daily Inspection ............................................................................................................................... 7
3.2 Weekly Test ..................................................................................................................................... 7
3.3 Monthly Test .................................................................................................................................... 7
3.4 Periodic Inspection .......................................................................................................................... 7
3.5 Annual Test ..................................................................................................................................... 8
3.6 5 Yearly Test ................................................................................................................................... 8
4.0 6100 ACCESS LEVELS......................................................................................................................... 9
4.1 Access Level 1 ( General User ) ..................................................................................................... 9
4.2 Access Level 2 ( Authorised / Trained User ) .................................................................................. 9
5.0 6100 INDICATIONS AND CONTROLS ............................................................................................... 10
5.1 Multifunction Display ..................................................................................................................... 10
5.2 General Indications ....................................................................................................................... 10
5.3 Multifunction Zone Status Indications ( Row 2, first 16 zones only ) ............................................. 10
5.4 Code Entry and Menu Navigation Keys ........................................................................................ 10
5.5 Sound Alarms, Silence Alarms, Reset Panel and Mute Buzzer keys............................................ 10
6.0 6100 FIRE INDICATIONS .................................................................................................................... 11
6.1 General Fire Indicator Illuminated ................................................................................................. 11
6.2 Multifunction Zone Indicator Flashing Red .................................................................................... 11
7.0 6100 FAULT INDICATIONS ................................................................................................................ 11
7.1 Zone Faults ................................................................................................................................... 11
7.2 System Faults ................................................................................................................................ 11
7.3 Alarm Fault .................................................................................................................................... 11
7.4 Supply Fault .................................................................................................................................. 12
7.5 Aux. Supply Fault .......................................................................................................................... 12
7.6 Repeat Panel Fault ........................................................................................................................ 12
7.7 Fire link Fault ................................................................................................................................. 12
8.0 6100 DISABLEMENT INDICATIONS .................................................................................................. 12
8.1 Zone Disablement ......................................................................................................................... 12
8.2 Alarm Disablement ........................................................................................................................ 12
8.3 Fire Link Disablement .................................................................................................................... 12
9.0 MISCELLANEOUS INDICATIONS ...................................................................................................... 12
9.1 Power on Indication ....................................................................................................................... 12
9.2 Pre Alarm ...................................................................................................................................... 12
9.3 Outputs Delayed ............................................................................................................................ 12
10.0 SYSTEM DELAYS ............................................................................................................................... 13
11.0 COINCIDENCE OPERATION .............................................................................................................. 13
12.0 6100 RESPONSE TO AN ALARM ...................................................................................................... 14
12.1 Automatic Detection ................................................................................................................... 14
12.2 Manual Detection ....................................................................................................................... 14
12.3 Coincidence Activation .............................................................................................................. 14
12.4 Silencing the Alarms .................................................................................................................. 14
Table of Contents
1.0 INTRODUCTION .................................................................................................................................... 5
2.0 USER RESPONSIBILITIES ................................................................................................................... 6
2.1 Requirements of the Premises Management Named Person ......................................................... 6
3.0 ROUTINE TESTING OF THE SYSTEM ................................................................................................. 7
3.1 Daily Inspection ............................................................................................................................... 7
3.2 Weekly Test ..................................................................................................................................... 7
3.3 Monthly Test .................................................................................................................................... 7
3.4 Periodic Inspection .......................................................................................................................... 7
3.5 Annual Test ..................................................................................................................................... 8
3.6 5 Yearly Test ................................................................................................................................... 8
4.0 6100 ACCESS LEVELS......................................................................................................................... 9
4.1 Access Level 1 ( General User ) ..................................................................................................... 9
4.2 Access Level 2 ( Authorised / Trained User ) .................................................................................. 9
5.0 6100 INDICATIONS AND CONTROLS ............................................................................................... 10
5.1 Multifunction Display ..................................................................................................................... 10
5.2 General Indications ....................................................................................................................... 10
5.3 Multifunction Zone Status Indications ( Row 2, first 16 zones only ) ............................................. 10
5.4 Code Entry and Menu Navigation Keys ........................................................................................ 10
5.5 Sound Alarms, Silence Alarms, Reset Panel and Mute Buzzer keys............................................ 10
6.0 6100 FIRE INDICATIONS .................................................................................................................... 11
6.1 General Fire Indicator Illuminated ................................................................................................. 11
6.2 Multifunction Zone Indicator Flashing Red .................................................................................... 11
7.0 6100 FAULT INDICATIONS ................................................................................................................ 11
7.1 Zone Faults ................................................................................................................................... 11
7.2 System Faults ................................................................................................................................ 11
7.3 Alarm Fault .................................................................................................................................... 11
7.4 Supply Fault .................................................................................................................................. 12
7.5 Aux. Supply Fault .......................................................................................................................... 12
7.6 Repeat Panel Fault ........................................................................................................................ 12
7.7 Fire link Fault ................................................................................................................................. 12
8.0 6100 DISABLEMENT INDICATIONS .................................................................................................. 12
8.1 Zone Disablement ......................................................................................................................... 12
8.2 Alarm Disablement ........................................................................................................................ 12
8.3 Fire Link Disablement .................................................................................................................... 12
9.0 MISCELLANEOUS INDICATIONS ...................................................................................................... 12
9.1 Power on Indication ....................................................................................................................... 12
9.2 Pre Alarm ...................................................................................................................................... 12
9.3 Outputs Delayed ............................................................................................................................ 12
10.0 SYSTEM DELAYS ............................................................................................................................... 13
11.0 COINCIDENCE OPERATION .............................................................................................................. 13
12.0 6100 RESPONSE TO AN ALARM ...................................................................................................... 14
12.1 Automatic Detection ................................................................................................................... 14
12.2 Manual Detection ....................................................................................................................... 14
12.3 Coincidence Activation .............................................................................................................. 14
12.4 Silencing the Alarms .................................................................................................................. 14
N93-571-87 Issue 5 NH Page 4 of 34 © Protec Fire Detection plc 2019
12.5 Resetting the 6100 after an Alarm ............................................................................................. 14
12.6 New Zone in Alarm .................................................................................................................... 14
12.7 Activating the Alarms Manually.................................................................................................. 14
13.0 6100 STATUS DISPLAYS ................................................................................................................... 15
13.1 The System Normal Display ...................................................................................................... 15
13.2 The Fault, Disablement and Test Display .................................................................................. 15
13.3 The Fire Alarm Display .............................................................................................................. 16
14.0 6100 USER MENUS............................................................................................................................. 17
14.1 Entering the 6100 Menu System ............................................................................................... 17
14.2 User Menu Structure .................................................................................................................. 17
14.3 Viewing Faults and Disablements.............................................................................................. 18
14.4 Clearing System Faults .............................................................................................................. 19
14.5 Testing the Front Panel Indications ........................................................................................... 19
14.6 Setting a Zone Into Walk Test Mode ......................................................................................... 20
14.7 Disabling a Zone ........................................................................................................................ 20
14.8 Disabling Alarm and Fire Link Outputs ...................................................................................... 21
14.9 Setting the Date and Time ......................................................................................................... 21
14.10 Viewing the Alarm Counter ........................................................................................................ 22
14.11 Viewing the Fire Event Log ........................................................................................................ 22
14.12 Viewing the General Event Log ................................................................................................. 23
14.13 Exiting the Menus ...................................................................................................................... 23
15.0 6100 FIRE BRIGADE PANEL OPERATION (AUSTRALIAN MARKETS) .......................................... 24
15.1 Enable Key ................................................................................................................................ 24
15.2 Silence Buzzer Button ............................................................................................................... 24
15.3 Silence Alarms Button ............................................................................................................... 24
15.4 Reset Button .............................................................................................................................. 24
15.5 Disable Button ........................................................................................................................... 24
16.0 APPENDIX 1 - 6100 SYSTEM SET UP RECORD............................................................................... 25
17.0 APPENDIX 2 - 6100 EVENT LOG ....................................................................................................... 28
18.0 APPENDIX 3 – 6100 OPERATION QUICK REFERENCE GUIDE ...................................................... 33
18.1 Entering Access Level 2 ............................................................................................................ 33
18.2 Returning to Access Level 1 ...................................................................................................... 33
18.3 Muting the Internal Buzzer and accepting Current Faults .......................................................... 33
18.4 Sounding the Alarms ................................................................................................................. 33
18.5 Silencing the Alarms .................................................................................................................. 33
18.6 Resetting the 6100 ..................................................................................................................... 33
18.7 Testing the Indicators and Internal Buzzer ................................................................................ 33
18.8 Setting the Date and Time ......................................................................................................... 33
12.5 Resetting the 6100 after an Alarm ............................................................................................. 14
12.6 New Zone in Alarm .................................................................................................................... 14
12.7 Activating the Alarms Manually.................................................................................................. 14
13.0 6100 STATUS DISPLAYS ................................................................................................................... 15
13.1 The System Normal Display ...................................................................................................... 15
13.2 The Fault, Disablement and Test Display .................................................................................. 15
13.3 The Fire Alarm Display .............................................................................................................. 16
14.0 6100 USER MENUS............................................................................................................................. 17
14.1 Entering the 6100 Menu System ............................................................................................... 17
14.2 User Menu Structure .................................................................................................................. 17
14.3 Viewing Faults and Disablements.............................................................................................. 18
14.4 Clearing System Faults .............................................................................................................. 19
14.5 Testing the Front Panel Indications ........................................................................................... 19
14.6 Setting a Zone Into Walk Test Mode ......................................................................................... 20
14.7 Disabling a Zone ........................................................................................................................ 20
14.8 Disabling Alarm and Fire Link Outputs ...................................................................................... 21
14.9 Setting the Date and Time ......................................................................................................... 21
14.10 Viewing the Alarm Counter ........................................................................................................ 22
14.11 Viewing the Fire Event Log ........................................................................................................ 22
14.12 Viewing the General Event Log ................................................................................................. 23
14.13 Exiting the Menus ...................................................................................................................... 23
15.0 6100 FIRE BRIGADE PANEL OPERATION (AUSTRALIAN MARKETS) .......................................... 24
15.1 Enable Key ................................................................................................................................ 24
15.2 Silence Buzzer Button ............................................................................................................... 24
15.3 Silence Alarms Button ............................................................................................................... 24
15.4 Reset Button .............................................................................................................................. 24
15.5 Disable Button ........................................................................................................................... 24
16.0 APPENDIX 1 - 6100 SYSTEM SET UP RECORD............................................................................... 25
17.0 APPENDIX 2 - 6100 EVENT LOG ....................................................................................................... 28
18.0 APPENDIX 3 – 6100 OPERATION QUICK REFERENCE GUIDE ...................................................... 33
18.1 Entering Access Level 2 ............................................................................................................ 33
18.2 Returning to Access Level 1 ...................................................................................................... 33
18.3 Muting the Internal Buzzer and accepting Current Faults .......................................................... 33
18.4 Sounding the Alarms ................................................................................................................. 33
18.5 Silencing the Alarms .................................................................................................................. 33
18.6 Resetting the 6100 ..................................................................................................................... 33
18.7 Testing the Indicators and Internal Buzzer ................................................................................ 33
18.8 Setting the Date and Time ......................................................................................................... 33
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
Annons