Rotary SPOA3TS-AF-EH2 2-post lift Owner's Manual

Rotary SPOA3TS-AF-EH2 is a two-post surface-mounted lift designed for professional automotive service applications. It features a heavy-duty construction, reliable hydraulics, and advanced safety mechanisms to ensure safe and efficient vehicle lifting. With its versatile design, the Rotary SPOA3TS-AF-EH2 is suitable for a wide range of vehicles, making it an ideal choice for workshops and garages.

SPOA3T-5/5AP/5AF
S & M &C
(700 Series)
Two Post Surface Mounted Lifts
Installer: Please return this booklet to literature package and give to lift owner/operator.
O
P
E
R
A
T
I
O
N
&
M
A
I
N
T
E
N
A
N
C
E
M
A
N
U
A
L
O
P
E
R
A
T
I
O
N
&
M
A
I
N
T
E
N
A
N
C
E
M
A
N
U
A
LOM-SPO-3
Rev.A 15/02/2018
© Rotary Lift, All rights reserved SJ180205

Table of Contents
1. Introduction ................................................................5
1.1 About this operating manual ....................................5
1.2 Warning and information symbols ...........................5
1.3 Intended use ...........................................................7
1.4 Incorrect use, incorrect behavior ............................ 7
1.5 Internal accident, health and safety, and environme-
ntal information ........................................ 7
2. Safety ............................... .......................... ....8
2.1 Operators ..................................................................8
2.2 Basic safety requirements ........................................8
2.3 Permitted axle loads and weight distribution ........ 8
2.4 Ban on unauthorized modifications or alterations ......9
2.5 Experts, competent persons ......................................9
2.6 Maintenance contractors, installation staff ................10
2.7 Safety inspections by competent persons ................10
2.8 Obligations of the plant operator ................................11
3. The 2-Post Lift ................................................12
3.1 Overview of parts ......................................................12
3.2 Work area, danger zones .........................................13
3.3 Safety mechanisms ..................................................14
3.4 Control unit ........................................................16
4. Operation .......................................................17
4.1 Before loading ........................................................17
4.2 Loading .............................................17
4.3 To rise lift .......................... ......................................18
4.4 While using lift...........................................................18
4.5 Before lowering lift......... ...........................................18
4.6 To lower lift................................................................18
4.7 Unloading .................................................................19
4.8 Power off....................................................................19
5. Problems, causes, actions.............................19
5.1 Troubleshooting by the operator ..............................19
5.2 Troubleshooting by authorized maintenance contractors
...................................................................................... ....20
6. Authorized lowering .......................................22
7. Technical data .................................................23
8. Cleaning ...........................................................29
9. Maintenance and repair ..................................29
9.1 Qualification of maintenance and repair staff ...........29
9.2 Maintenance and repair safety regulations ............. .29
9.3 Maintenance work ...........................................30
9.4 Approved hydraulic oils ............................................32
9.5 Check, refill, change the hydraulic oil .......................33
9.6 Repair work (Repairs) ..............................................34
10.Transport, Storage ...................................35
10.1 Transport .................................................................36
10.2 Offloading..................................................................36
10.3 Storage .....................................................................36
11.Assembly ........................................................36
11.1 Assembly safety instructions ................................. 36
11.2 Quick assembly instructions ................ ...................37
11.3 Site specifications ................................................... 37
11.4 Installation preparations ..........................................37
11.5 Prepare the columns ...............................................37
11.6 Prepare the overhead assembly...............................39
11.7 Assemble the hydraulics module..............................41
11.8 Assemble the equalizing cables............. .................43
11.9 Assemble the locking latch cables for M version......46
11.10 Assemble the electrical connections.......................47
11.11 Installing Gaskets ,web cover andwire chase.........52
11.12 Installing the arms and restraints ..........................53
11.13 Installing others......................................................54
12. Commissioning .............................................56
12.1 Check Operation.....................................................56
12.2 Test the hydraulic system .......................................56
12.3 Oil bleeding.............................................................56
3

12.4 Checking and Adjusting Equailzer Cables.............56
12.5 Checking and Adjusting Latch cable for M
series...............................................................................56
12.6 Locking Latch Engagement Test ..........................56
13. Disassembly ...................................................58
14. Disposal ..........................................................58
14.1 Environmental procedures for disposal ...................58
14.2 Packaging ................................................................58
14.3 Oils, grease, and other chemical substances ..........58
14.4 Metals / Electronic waste .........................................58
ANNEX
• SPOA3TS/C/M
Hydraulic circuit diagram, Electric wiring diagram,
Parts break down, spare parts list.
• Protocol of installation
• Completion certificate
• Maintenance schedule: Instructions for conducting
visual inspections and function testing
• Inspection log
• Master sheet for vehicle lift
• Test report
4