Terex Genie GS-1530, Genie GS-1932 Operator's Manual
Terex Genie GS-1932 is a versatile aerial work platform designed for lifting personnel and materials to elevated work sites. It features a robust construction, a compact footprint, and various safety features for safe operation. It is suitable for a variety of indoor and outdoor applications where accessing elevated work areas is necessary.
advertisement
Operator's Manual
GS-1530/32 • GS-1930/32 Part No. T107027
Seventh Edition • First Printing
Copyright © 1997 by Genie Industries
Seventh Edition: First Printing, February 2011
"Genie" is a registered trademark of
Genie Industries in the U.S.A. and many other
countries. "GS" is a trademark of Genie
Industries.
Complies with EC Directive 2006/42/EC
See EC Declaration of Conformity
Printed on recycled paper
Printed in U.S.A.
Important
Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. This manual should
be considered a permanent part of your machine and
should remain with the machine at all times. If you
have any questions, call Genie Industries.
Contents
Page
Introduction ................................................................ 1
Symbol and Hazard Pictorials Definitions .................. 3
General Safety .......................................................... 5
Personal Safety ......................................................... 7
Work Area Safety ...................................................... 8
Legend ..................................................................... 14
Controls .................................................................... 15
Inspections ............................................................... 18
Operating Instructions .............................................. 28
Transport and Lifting Instructions.............................. 35
Maintenance ............................................................. 39
Specifications ........................................................... 41
Contact us:
Internet: www.genielift.com
e-mail: [email protected]
GS-1530/32 • GS-1930/32 Part No. T107027
Seventh Edition • First Printing
Copyright © 1997 by Genie Industries
Seventh Edition: First Printing, February 2011
"Genie" is a registered trademark of
Genie Industries in the U.S.A. and many other
countries. "GS" is a trademark of Genie
Industries.
Complies with EC Directive 2006/42/EC
See EC Declaration of Conformity
Printed on recycled paper
Printed in U.S.A.
Important
Read, understand and obey these safety rules and
operating instructions before operating this machine.
Only trained and authorized personnel shall be
permitted to operate this machine. This manual should
be considered a permanent part of your machine and
should remain with the machine at all times. If you
have any questions, call Genie Industries.
Contents
Page
Introduction ................................................................ 1
Symbol and Hazard Pictorials Definitions .................. 3
General Safety .......................................................... 5
Personal Safety ......................................................... 7
Work Area Safety ...................................................... 8
Legend ..................................................................... 14
Controls .................................................................... 15
Inspections ............................................................... 18
Operating Instructions .............................................. 28
Transport and Lifting Instructions.............................. 35
Maintenance ............................................................. 39
Specifications ........................................................... 41
Contact us:
Internet: www.genielift.com
e-mail: [email protected]
Operator's ManualSeventh Edition • First Printing
Part No. T107027 GS-1530/32 • GS-1930/32 1
Introduction
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer's instructions and safety rules—
safety and operator's manuals and machine
decals.
You read, understand and obey employer's
safety rules and work site regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Owners, Users and Operators:
Genie appreciates your choice of our machine for
your application. Our number one priority is user
safety, which is best achieved by our joint efforts.
We feel that you make a major contribution to
safety if you, as the equipment users and
operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in a common
sense way.
4 Only have trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
If there is anything in this manual that is not clear
or which you believe should be added, please
contact us.
Internet: www.genielift.com
E-mail: [email protected]
Part No. T107027 GS-1530/32 • GS-1930/32 1
Introduction
Danger
Failure to obey the instructions and
safety rules in this manual will result
in death or serious injury.
Do Not Operate Unless:
You learn and practice the principles of safe
machine operation contained in this operator's
manual.
1 Avoid hazardous situations.
Know and understand the safety rules
before going on to the next section.
2 Always perform a pre-operation inspection.
3 Always perform function tests prior to use.
4 Inspect the workplace.
5 Only use the machine as it was intended.
You read, understand and obey the
manufacturer's instructions and safety rules—
safety and operator's manuals and machine
decals.
You read, understand and obey employer's
safety rules and work site regulations.
You read, understand and obey all applicable
governmental regulations.
You are properly trained to safely operate the
machine.
Owners, Users and Operators:
Genie appreciates your choice of our machine for
your application. Our number one priority is user
safety, which is best achieved by our joint efforts.
We feel that you make a major contribution to
safety if you, as the equipment users and
operators:
1 Comply with employer, job site and
governmental rules.
2 Read, understand and follow the instructions
in this and other manuals supplied with this
machine.
3 Use good safe work practices in a common
sense way.
4 Only have trained/certified operators,
directed by informed and knowledgeable
supervision, running the machine.
If there is anything in this manual that is not clear
or which you believe should be added, please
contact us.
Internet: www.genielift.com
E-mail: [email protected]
Operator's Manual Seventh Edition • First Printing
2 GS-1530/32 • GS-1930/32 Part No. T107207
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools and materials to
an aerial work site.
Introduction
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Hazard Classification
Genie uses symbols, color coding and signal
words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates property damage
message.
Red
Orange
Yellow
Blue
2 GS-1530/32 • GS-1930/32 Part No. T107207
Intended Use
This machine is intended to be used only to lift
personnel, along with their tools and materials to
an aerial work site.
Introduction
Safety Sign Maintenance
Replace any missing or damaged safety signs.
Keep operator safety in mind at all times. Use mild
soap and water to clean safety signs. Do not use
solvent-based cleaners because they may damage
the safety sign material.
Hazard Classification
Genie uses symbols, color coding and signal
words to identify the following:
Safety alert symbol—used to alert
you to potential personal injury
hazards. Obey all safety
messages that follow this symbol
to avoid possible injury or death.
Indicates a hazardous situation
which, if not avoided, will result in
death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could result
in minor or moderate injury.
Indicates property damage
message.
Red
Orange
Yellow
Blue
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
advertisement
Key Features
- 227 kg capacity
- Indoor/outdoor use
- High speed lift
- Low speed lift
- Tilt alarm
- Emergency lowering
- Platform controls
- Ground controls
- Pothole guards
- Safety arm
Related manuals
Frequently Answers and Questions
What is the maximum platform capacity of the Terex Genie GS-1932?
The maximum platform capacity for the GS-1932 is 227 kg.
Can the GS-1932 be used both indoors and outdoors?
Yes, the GS-1932 can be used both indoors and outdoors with certain limitations. Consult the manual for specific conditions.
What is the purpose of the pothole guards?
The pothole guards help to prevent the machine from tipping over when driving over uneven terrain.
What is the safety arm and how does it function?
The safety arm is a mechanical device that secures the platform when raised. It prevents the platform from accidentally lowering and ensures safety for the operators.
advertisement