Silvercrest SWV 733 B1 Quick Start Manual

Silvercrest SWV 733 B1 Quick Start Manual

Silvercrest SWV 733 B1 is a Dual-Band WLAN Range Extender that can be used to extend the range of your existing Wi-Fi network. It features two operating modes: Access Point and Repeater. In Repeater mode, it can be placed between your Wi-Fi router and wireless devices to amplify and extend the Wi-Fi signal. In Access Point mode, it can be used to create a new Wi-Fi network, allowing you to connect devices that do not have Wi-Fi capabilities. The device supports WPS for easy setup and offers a Field strength indicator to help you find the optimal location for placement.

advertisement

SilverCrest Dual-Band WLAN Range Extender “SWV 733 B1” IAN: 300187
TARGA GmbH, Coesterweg 45, DE-59494 Soest, GERMANY V 1.6
Quick Start Guide English
Please ensure you read and observe the accompanying operating instructions and safety information. Keep this Quick Start Guide in a safe place. Hand over all
documents in the event that you pass on the Dual-Band WiFi Range Extender to a third party. This Quick Start Guide is part of the product.
Selecting operating mode and initial use
Select “Access Point” or “Repeater” operating mode. The Dual-Band WiFi Range Extender should be placed near (approx. 2 to 3
metres) the WiFi router the first time it is used. Wait approx. 3 minutes!
Installation hotline with free support
Should you need any support during initial use of your Dual-Band WiFi Range Extender, we will be more than happy to help via our contact numbers
0871 5000 720 (GB), 1890 930 034 (IE), 800 62230 (MT), 8009 4409 (CY).
Option1: WPS - The easiest type of configuration (only for “Repeater” operating mode)
Option2: Manual configuration
Option3: APP configuration
Option1: WPS - The easiest type of configuration (only for “Repeater” operating mode)
Use this option if your router supports WPS.
Press the WPS button for at least 6 seconds. After you have
released the WPS button, the WPS LED flashes rapidly for
approx. 2 minutes.
(Symbolic representation, connection button (WPS) can be differently arranged and designated depending on the router
model)
Within these 2 minutes, press the connection button (WPS) on your WiFi router. To do so, refer to the
documentation that came with your WiFi router. Once the connection has been successfully
established, the Field strength indicator displays the signal strength on the Dual-Band WiFi Range
Extender.
It may take up to 3 minutes to establish the connection!
You can now use the Dual-Band WiFi Range Extender where the wireless signal is to be extended. The optimum location for the Dual-Band WiFi Range Extender is
exactly in the middle between your WiFi router and wireless devices, which are to be connected to the wireless network via the Dual-Band WiFi Range Extender. Wait
until the Field strength indicator shows the signal strength. If the signal strength is weak, the Dual-Band WiFi Range Extender must be placed closer to the WiFi router.
The Dual-Band WiFi Range Extender can be accessed under the SSID (Wireless name) and the network key of your WiFi router. Your network key can usually be
found on your router, provided it has not been changed by you.
SilverCrest Dual-Band WLAN Range Extender “SWV 733 B1” IAN: 300187
TARGA GmbH, Coesterweg 45, DE-59494 Soest, GERMANY V 1.6
Option2: Manual configuration
Use this option if your router does not support WPS.
Connection via network cable
or
Connection via WiFi
Connect the Dual-Band WiFi Range Extender to your computer via the
network cable (included in the package contents).
Connect your Dual-Band WiFi Range Extender via WiFi. For further
details, please consult the documentation provided with your computer.
Network key: 9426824723156819
Now open the Internet browser on your computer. Enter
https://repeater.setup in the address line of your Internet browser and
confirm the entry with the Enter key.
Select the desired language and enter the username and password (both set as:
admin).
Assign a new username and a new password.
You must use a username with at least 8 characters, including uppercase and
lowercase. Numbers and special characters are optional.
You must use a password with at least 10 characters, including uppercase and
lowercase, numbers and special characters.
Make a note of the username and password and store them in a safe place!
Follow the instructions of the wizard to configure your Dual-Band WiFi Range Extender
Once the connection has been successfully established or the Dual-Band WiFi Range Extender is ready for operation, the Field strength indicator
displays the signal strength on the Dual-Band WiFi Range Extender.
Repeater mode:
You can now use the Dual-Band WiFi Range Extender where the wireless signal is to be extended. The optimum location for the Dual-Band WiFi Range Extender is
exactly in the middle between your WiFi router and wireless devices, which are to be connected to the wireless network via the Dual-Band WiFi Range Extender. Wait
until the Field strength indicator shows the signal strength. If the signal strength is weak, the Dual-Band WiFi Range Extender must be placed closer to the WiFi router.
The Dual-Band WiFi Range Extender can be accessed under the SSID (Wireless name) and the network key of your WiFi router. Your network key can usually be
found on your router, provided it has not been changed by you.
Access Point mode:
You can now place the Dual-Band WiFi Range Extender where you wish to use it. The Dual-Band WiFi Range Extender can be accessed under the SSID (wireless
name) specified by you and the network key.
Option3: APP configuration
Use this option if your router does not support WPS.
Download the SilverCrest SWV 733 B1 app from the
Apple App Store or Google Play Store. To install the app
on your mobile device, either directly use the QR codes or
search in the respective App Store for SilverCrest SWV
733 B1.
Connect your mobile device to your Dual-Band WiFi
Range Extender via WiFi. Please consult the
documentation provided with your mobile device.
Network key: 9426824723156819
Launch the app and follow the instructions. Once
the connection has been successfully established
or the Dual-Band WiFi Range Extender is ready
for operation, the Field strength indicator
displays the signal strength on the Dual-Band
WiFi Range Extender.
Repeater mode:
You can now use the Dual-Band WiFi Range Extender where the wireless signal is to be extended. The optimum location for the Dual-Band WiFi Range Extender is
exactly in the middle between your WiFi router and wireless devices, which are to be connected to the wireless network via the Dual-Band WiFi Range Extender. Wait
until the Field strength indicator shows the signal strength. If the signal strength is weak, the Dual-Band WiFi Range Extender must be placed closer to the WiFi router.
The Dual-Band WiFi Range Extender can be accessed under the SSID (Wireless name) and the network key of your WiFi router.
Access Point mode:
You can now place the Dual-Band WiFi Range Extender where you wish to use it. The Dual-Band WiFi Range Extender can be accessed under the SSID (wireless
name) specified by you and the network key.
  • Page 1
  • Page 2
/

advertisement

Key Features

  • Extends the range of your existing Wi-Fi network
  • Supports both the 2.4 GHz and 5 GHz frequency bands
  • Can be used in either access point or repeater mode
  • Easy to set up
  • Can be managed using a web-based interface or a mobile app

Related manuals

Frequently Answers and Questions

What is the difference between access point and repeater mode?
In access point mode, the range extender creates a new Wi-Fi network. In repeater mode, the range extender extends the range of your existing Wi-Fi network.
How do I set up the range extender?
You can set up the range extender using either the web-based interface or the mobile app.
How do I manage the range extender?
You can manage the range extender using either the web-based interface or the mobile app.

advertisement