Clover B14A, B14B, b9a, b9b Service Manual

Show PDF Add to My manuals
15 Pages

advertisement

1
2
TABLE OF CONTENTS
1. SPECIFICATION & PARTS
IDENTIFICATION .............................................................................3
2. OPERATION & FUNCTION OF
PARTS....................................................................................4, 5
A. Cooling Operation
B. Heating Operation
C. Function of Parts
3. LOCATION
REQUIREMENTS.......................................................................................................5
4. INSTALLATION PROCEDURES ..............................................................................................5,
6
5.
STORAGE.......................................................................................................……………………..6
6. CLEANING ..................................................................................................…………………….6,
7
7. TROUBLESHOOTING GUIDE..............................................................................……......7,
8
8. WIRING
DIAGRAM………………………….........................................................……….........9
9. EXPLODED VIEW & SERVICE PARTS LIST
A. B14A..................................................................................................................................10,
11
B. B14B.................................................................................................................................12, 13
FOR YOUR SAFETY
Please read the following safety precaution before servicing the watercooler.
1) Check if an electric leakage occurs in the appliance.
2) To prevent electric shock, unplug prior to servicing.
3
3) In case of testing with power on, wear rubber gloves to prevent electric shock.
4) When using an instrument or replacing a part for repairing, check it is applied to
rated voltage current and capacity.
5) Prevent water from flowing into electric elements in mechanical parts.
6) When carrying or tilting the appliance, remove all the objects on it.
7) If the cooling cycle is out of order, contact nearest authorized service center for
maintenance, repair and adjustment.
1. SPECIFICATION & PARTS IDENTIFICATION
MODEL B14A(HOT & COLD) B14B(COOK & COLD)
DIMENSION 313W×323D×963H(mm)
WEIGHT 16kg 17kg
CONSUMPTION 105W
TEMP CONTROL AUTO
TANK Stainless Steel
COLD
CAPACITY 3.0 /h (10 )
CONSUMPTION 405W/465W
PROTECTOR Heat Limiter
TEMP. CONTROL Hot Control
TANK Stainless Steel
HOT
CAPACITY 7.5 /h (85)
ELECTRICAL 220-240V, 50/60Hz. 110-127V, 50/60Hz.
Check the available power supply against the watercooler data plate to assure correct electrical service.
4
2. OPERATION & FUNCTION OF PARTS
5
6
7
8
9
10
11
12
13
14
15
  • Page 1
  • Page 2
  • Page 3
  • Page 4
  • Page 5
  • Page 6
  • Page 7
  • Page 8
  • Page 9
  • Page 10
  • Page 11
  • Page 12
  • Page 13
  • Page 14
  • Page 15
/

advertisement

Key Features

  • Hot & Cold Water
  • Stainless Steel Tank
  • 7.5 L/h Capacity
  • Hot Water Control
  • Heat Limiter
  • Safety Faucet
  • Drain Cap

Related manuals

Frequently Answers and Questions

How do I clean the Clover B14B water cooler?
To clean the cooler, you must first turn off the hot water switch and unplug the power cord. Then, drain the hot and cold water tanks. Remove the faucets and baffle from the cooler. Clean the faucets, drip tray, and cold tank with mild soap and water. Rinse thoroughly with clean water. Reassemble the cooler and flush the water trail through both hot and cold tanks. Finally, brush out and vacuum the condenser.
What is the hot water temperature control range of the Clover B14B?
The hot water temperature is controlled by a hot control and is designed to maintain a proper temperature. The exact temperature range is not specified in the manual.
What is the safety feature on the Clover B14B's hot water faucet?
The Clover B14B has a safety faucet that is designed to deter accidental dispensing of hot water by toddlers. It requires a firm press down on the handle for hot water to flow.

advertisement