advertisement
SolarForm 04/21 page 1 of 6
Solar lighting
SolarForm
BRP710 Off-grid luminaire
Gardco SolarForm off-grid luminaire is an all in one integrated cost-effective solar
solution with a high quality of light and reliable performance consisting of a LED
light with a solar photovoltaic panel, a battery, and a controller, making it easy to
specify, sell, install, and maintain. It comes pre-programmed with dimming profiles
adapted to night activities and expected solar energy performance ready to be
turned-on for customers to have a lighting solution in areas where electricity is
not available (inc. temporary) and/or more expensive.
SolarForm 04/21 page 1 of 6
Project:
Location:
Cat.No:
Type:
Lumens: Qty:
Notes:
Replacement batteries
(ordered separately through Signify, field installed)
919415811054 SPARE BT LFP 12.8V 13.6Ah SOLAR EQUIP SolarForm 2000 lumen PDIM50 battery replacement
919415811055 SPARE BT LFP 12.8V 20Ah SOLAR EQUIP SolarForm 2000 lumen FDIM50 battery replacement
919415811055 SPARE BT LFP 12.8V 20Ah SOLAR EQUIP SolarForm 3000 lumen battery replacement
919415811056 SPARE BT LFP 12.8V 30Ah SOLAR EQUIP SolarForm 4500 lumen battery replacement
Dimming Profile 1
First 5 hours from dusk, motion sensor enabled, and light level is at 50% if there is no presence detected.
Next 5 hours, motion sensor disabled, and light level fixed at 50%.
Remaining hours to dawn, motion sensor enabled, and light level is at 50% if there is no presence detected.
Dimming Profile 2
First 5 hours from dusk, motion sensor enabled, and light level is at 30% if there is no presence detected.
Next 5 hours, motion sensor disabled, and light level fixed at 30%.
Remaining hours to dawn, motion sensor enabled, and light level is at 30% if there is no presence detected.
Dimming Profile 3
First 5 hours from dusk, no motion sensor, and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor, and light level is fixed at 50%.
Dimming Profile 4
First 5 hours from dusk, no motion sensor, and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor, and light level is fixed at 30%.
See additional information on p. 3.
Catalog Code Lumen Output Color Distribution Sensor Dimming Profile*
BRP710 LED20 NW MR 12V 35MO PDIM50 Solar 2000 NW IES Type 2 Y 1
BRP710 LED20 NW MR 12V 35MO FDIM50 Solar 2000 NW IES Type 2 N 3
BRP710 LED20 WW MR 12V 35MO PDIM50 Solar 2000 WW IES Type 2 Y 1
BRP710 LED20 WW MR 12V 35MO FDIM50 Solar 2000 WW IES Type 2 N 3
BRP710 LED30 NW MR 12V FDIM Solar Equip 3000 NW IES Type 2 N 4
BRP710 LED30 WW MR 12V LFP AIO Solar 3000 WW IES Type 2 Y 2
BRP710 LED30 WW MR 12V FDIM Solar Equip 3000 WW IES Type 2 N 4
BRP710 LED45 WW MR S1 12V LFP Solar 4500 WW IES Type 2 Y 2
BRP710 LED45 WW MR S1 12V FD30 Solar 4500 WW IES Type 2 N 4
Catalog Code Lumen Output Color Distribution Sensor Dimming Profile*
BRP710 LED30 NW MR 12V LFP AIO Solar 3000 NW IES Type 2 Y 2
BRP710 LED45 NW MR S1 12V LFP Solar 4500 NW IES Type 2 Y 2
BRP710 LED45 NW MR S1 12V FD30 Solar 4500 NW IES Type 2 N 4
Ordering guide
Stocked luminaires ordering guide
Solar lighting
SolarForm
BRP710 Off-grid luminaire
Gardco SolarForm off-grid luminaire is an all in one integrated cost-effective solar
solution with a high quality of light and reliable performance consisting of a LED
light with a solar photovoltaic panel, a battery, and a controller, making it easy to
specify, sell, install, and maintain. It comes pre-programmed with dimming profiles
adapted to night activities and expected solar energy performance ready to be
turned-on for customers to have a lighting solution in areas where electricity is
not available (inc. temporary) and/or more expensive.
SolarForm 04/21 page 1 of 6
Project:
Location:
Cat.No:
Type:
Lumens: Qty:
Notes:
Replacement batteries
(ordered separately through Signify, field installed)
919415811054 SPARE BT LFP 12.8V 13.6Ah SOLAR EQUIP SolarForm 2000 lumen PDIM50 battery replacement
919415811055 SPARE BT LFP 12.8V 20Ah SOLAR EQUIP SolarForm 2000 lumen FDIM50 battery replacement
919415811055 SPARE BT LFP 12.8V 20Ah SOLAR EQUIP SolarForm 3000 lumen battery replacement
919415811056 SPARE BT LFP 12.8V 30Ah SOLAR EQUIP SolarForm 4500 lumen battery replacement
Dimming Profile 1
First 5 hours from dusk, motion sensor enabled, and light level is at 50% if there is no presence detected.
Next 5 hours, motion sensor disabled, and light level fixed at 50%.
Remaining hours to dawn, motion sensor enabled, and light level is at 50% if there is no presence detected.
Dimming Profile 2
First 5 hours from dusk, motion sensor enabled, and light level is at 30% if there is no presence detected.
Next 5 hours, motion sensor disabled, and light level fixed at 30%.
Remaining hours to dawn, motion sensor enabled, and light level is at 30% if there is no presence detected.
Dimming Profile 3
First 5 hours from dusk, no motion sensor, and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor, and light level is fixed at 50%.
Dimming Profile 4
First 5 hours from dusk, no motion sensor, and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor, and light level is fixed at 30%.
See additional information on p. 3.
Catalog Code Lumen Output Color Distribution Sensor Dimming Profile*
BRP710 LED20 NW MR 12V 35MO PDIM50 Solar 2000 NW IES Type 2 Y 1
BRP710 LED20 NW MR 12V 35MO FDIM50 Solar 2000 NW IES Type 2 N 3
BRP710 LED20 WW MR 12V 35MO PDIM50 Solar 2000 WW IES Type 2 Y 1
BRP710 LED20 WW MR 12V 35MO FDIM50 Solar 2000 WW IES Type 2 N 3
BRP710 LED30 NW MR 12V FDIM Solar Equip 3000 NW IES Type 2 N 4
BRP710 LED30 WW MR 12V LFP AIO Solar 3000 WW IES Type 2 Y 2
BRP710 LED30 WW MR 12V FDIM Solar Equip 3000 WW IES Type 2 N 4
BRP710 LED45 WW MR S1 12V LFP Solar 4500 WW IES Type 2 Y 2
BRP710 LED45 WW MR S1 12V FD30 Solar 4500 WW IES Type 2 N 4
Catalog Code Lumen Output Color Distribution Sensor Dimming Profile*
BRP710 LED30 NW MR 12V LFP AIO Solar 3000 NW IES Type 2 Y 2
BRP710 LED45 NW MR S1 12V LFP Solar 4500 NW IES Type 2 Y 2
BRP710 LED45 NW MR S1 12V FD30 Solar 4500 NW IES Type 2 N 4
Ordering guide
Stocked luminaires ordering guide
SolarForm 04/21 page 2 of 6BRP710 SolarForm
Off-grid luminaire
Dimensions
1.49"
(38mm)
.90"
(23mm)14.53"
(369mm)
14.53"
(369mm)
20.12"
(511mm)
31.69"
(805mm)
29.80"
(757mm)
26.93"
(684mm)
30.28"
(769mm)
26.93"
(684mm)
3.27"
(83mm)
6.14"
(156mm) 7.40"
(188mm)
3.27"
(83mm)
Weight:
2000L: 19.8 lbs (9 Kg)
3000L: 23.1 lbs (10.5Kg)
Effective Projected Area (EPA):
2000-3000L: .683 ft 2 (.063 m 2
)
Weight:
4500L weight: 41.9 lbs (19 Kg)
Effective Projected Area (EPA):
4500L: .832 ft 2 (.077 m 2
)
Ordering Code
Total
LEDs
LED
Current
(mA)
Color
Temp.
Average
System
Watts
Lumen
Output
BUG
Rating
Efficacy
(LPW)
BRP710-LED20-WW-XX 112 35 3000 11 2042 B1-U0-G1 186
BRP710-LED30-WW-XX 196 31 3000 17 3113 B1-U0-G1 188
BRP710-LED45-WW-XX 196 46 3000 26 4544 B2-U0-G1 180
Ordering Code
Total
LEDs
LED
Current
(mA)
Color
Temp.
Average
System
Watts
Lumen
Output
BUG
Rating
Efficacy
(LPW)
BRP710-LED20-NW-XX 112 35 4000 11 2056 B1-U0-G1 188
BRP710-LED30-NW-XX 196 31 4000 17 3276 B1-U0-G1 193
BRP710-LED45-NW-XX 196 46 4000 26 4698 B2-U0-G1 183
LED Wattage and Lumen Values - CCT = 3000K
(at 100% with motion sensor activated)
LED Wattage and Lumen Values - CCT = 4000K
(at 100% with motion sensor activated)
Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown.
Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement
considerations. It is highly recommended to confirm performance with a photometric layout.
NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown.
Predicted Lumen Depreciation Data*
Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology.
Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of
initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours
Lifetime data is based off worst case LED45 configuration.
Ambient Temperature °C Drive current L70 per TM-21 Lumen Maintenance % at 60,000 hrs
25°C 900 mA >60,000 hours >94%
Optical Distributions
Based on mounting height of 15ft (Dimensions below are in ft)
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
2000 lumens
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
3000 lumens
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
4500 lumens
1 fc.5 fc
2 fc 2 fc1 fc
.5 fc
1 fc
.5 fc
2 fc
Off-grid luminaire
Dimensions
1.49"
(38mm)
.90"
(23mm)14.53"
(369mm)
14.53"
(369mm)
20.12"
(511mm)
31.69"
(805mm)
29.80"
(757mm)
26.93"
(684mm)
30.28"
(769mm)
26.93"
(684mm)
3.27"
(83mm)
6.14"
(156mm) 7.40"
(188mm)
3.27"
(83mm)
Weight:
2000L: 19.8 lbs (9 Kg)
3000L: 23.1 lbs (10.5Kg)
Effective Projected Area (EPA):
2000-3000L: .683 ft 2 (.063 m 2
)
Weight:
4500L weight: 41.9 lbs (19 Kg)
Effective Projected Area (EPA):
4500L: .832 ft 2 (.077 m 2
)
Ordering Code
Total
LEDs
LED
Current
(mA)
Color
Temp.
Average
System
Watts
Lumen
Output
BUG
Rating
Efficacy
(LPW)
BRP710-LED20-WW-XX 112 35 3000 11 2042 B1-U0-G1 186
BRP710-LED30-WW-XX 196 31 3000 17 3113 B1-U0-G1 188
BRP710-LED45-WW-XX 196 46 3000 26 4544 B2-U0-G1 180
Ordering Code
Total
LEDs
LED
Current
(mA)
Color
Temp.
Average
System
Watts
Lumen
Output
BUG
Rating
Efficacy
(LPW)
BRP710-LED20-NW-XX 112 35 4000 11 2056 B1-U0-G1 188
BRP710-LED30-NW-XX 196 31 4000 17 3276 B1-U0-G1 193
BRP710-LED45-NW-XX 196 46 4000 26 4698 B2-U0-G1 183
LED Wattage and Lumen Values - CCT = 3000K
(at 100% with motion sensor activated)
LED Wattage and Lumen Values - CCT = 4000K
(at 100% with motion sensor activated)
Values from photometric tests performed in accordance with IESNA LM-79 and are representative of the configurations shown.
Actual performance may vary due to installation and environmental variables, LED and driver tolerances, and field measurement
considerations. It is highly recommended to confirm performance with a photometric layout.
NOTE: Some data may be scaled based on tests of similar (but not identical) luminaires. Contact factory for configurations not shown.
Predicted Lumen Depreciation Data*
Predicted performance derived from LED manufacturer’s data and engineering design estimates, based on IESNA LM-80 methodology.
Actual experience may vary due to field application conditions.L70 is the predicted time when LED performance depreciates to 70% of
initial lumen output. Calculated per IESNA TM21-11. Published L70 hours limited to 6 times actual LED test hours
Lifetime data is based off worst case LED45 configuration.
Ambient Temperature °C Drive current L70 per TM-21 Lumen Maintenance % at 60,000 hrs
25°C 900 mA >60,000 hours >94%
Optical Distributions
Based on mounting height of 15ft (Dimensions below are in ft)
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
2000 lumens
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
3000 lumens
0
75
60
60
45
45
30
30
15
15
7560453015060 45 30 15
4500 lumens
1 fc.5 fc
2 fc 2 fc1 fc
.5 fc
1 fc
.5 fc
2 fc
SolarForm 04/21 page 3 of 6BRP710 SolarForm
Off-grid luminaire
Dimming Profiles
Profile 1 – Energy Savings Priority
(PDIM50 for 2000 lumen models only)
First 5 hours from dusk, motion sensor enabled, and
light level is at 50% if there is no presence detected.
Next 5 hours, motion sensor disabled, and
light level fixed at 50%.
Remaining hours to dawn, motion sensor enabled, and
light level is at 50% if there is no presence detected.
Profile 2 – Energy Savings Priority
(Default for 3000 and 4500 lumen models only)
First 5 hours from dusk, motion sensor enabled, and
light level is at 30% if there is no presence detected.
Next 5 hours, motion sensor disabled,
and light level fixed at 30%.
Remaining hours to dawn, motion sensor enabled, and
light level is at 30% if there is no presence detected.
Profile 3 – Light Output Priority
(FDIM50 for 2000 lumen models only)
First 5 hours from dusk, no motion sensor,
and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor,
and light level is fixed at 50%.
Profile 4 – Light Output Priority
(FDIM for 3000 and FD30 for 4500 lumen models only)
First 5 hours from dusk, no motion sensor,
and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor,
and light level is fixed at 30%.
5 hours
5 hours
5 hours
5 hours
10 hours
10 hours
10 hours
10 hours
Dusk
Dusk
Dusk
Dusk
Time elapsed
Time elapsed
Time elapsed
Time elapsed
Dawn
Dawn
Dawn
Dawn
Light level
Light level
Light level
Light level
30%
30%
30%
30%
50%
50%
50%
50%
100%
100%
100%
100%
Off-grid luminaire
Dimming Profiles
Profile 1 – Energy Savings Priority
(PDIM50 for 2000 lumen models only)
First 5 hours from dusk, motion sensor enabled, and
light level is at 50% if there is no presence detected.
Next 5 hours, motion sensor disabled, and
light level fixed at 50%.
Remaining hours to dawn, motion sensor enabled, and
light level is at 50% if there is no presence detected.
Profile 2 – Energy Savings Priority
(Default for 3000 and 4500 lumen models only)
First 5 hours from dusk, motion sensor enabled, and
light level is at 30% if there is no presence detected.
Next 5 hours, motion sensor disabled,
and light level fixed at 30%.
Remaining hours to dawn, motion sensor enabled, and
light level is at 30% if there is no presence detected.
Profile 3 – Light Output Priority
(FDIM50 for 2000 lumen models only)
First 5 hours from dusk, no motion sensor,
and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor,
and light level is fixed at 50%.
Profile 4 – Light Output Priority
(FDIM for 3000 and FD30 for 4500 lumen models only)
First 5 hours from dusk, no motion sensor,
and light level is fixed at 100%.
Remaining hours to dawn, no motion sensor,
and light level is fixed at 30%.
5 hours
5 hours
5 hours
5 hours
10 hours
10 hours
10 hours
10 hours
Dusk
Dusk
Dusk
Dusk
Time elapsed
Time elapsed
Time elapsed
Time elapsed
Dawn
Dawn
Dawn
Dawn
Light level
Light level
Light level
Light level
30%
30%
30%
30%
50%
50%
50%
50%
100%
100%
100%
100%
SolarForm 04/21 page 4 of 6BRP710 SolarForm
Off-grid luminaire
Compatible Gardco poles
EPA Ratings
example: SSS-12-4-11-T2X6-SSDGY
Prefix
SSS
Height Pole Size
4
Gauge
11
Drilling
T2X6
Finish
SSDGY
SSS Straight Square Steel 12 12 ft
14 14 ft
15 15 ft
18 18 ft
20 20 ft
4 4 inch 11 11 gauge T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
SRS
Height Pole Size
4
Drilling
T2X6
Finish
SSDGY
SRS Straight Round Steel 14 14 ft
16 16 ft
20 20 ft
4 4 inch T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
TRA-CB
Height Wind Factor
M
Drilling
T2X6
Finish
SSDGY
TRA-CB Tapered Round
Aluminum w/ Cast Base 12 12 ft
14 14 ft
16 16 ft
20 20 ft
M Medium T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
SSA4-HB
Height Drilling
T2X6
Finish
SSDGY
SSA4-HB Straight Square Aluminum 4" w/ Hinged Base 12 12 ft
15 15 ft
16 16 ft
18 18 ft
T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix Height Drilling
T2X6
Finish
SSDGY
RA4-HB Straight Round Aluminum, Side Arm Mount,
4" w/ Hinged Base 15 15 ft T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
RA5-HB Straight Round Aluminum, Side Arm Mount,
5" w/ Hinged Base 15 15 ft
18 18 ft
20 20 ft
Maximum Luminaire Loading * †
High Wind Conditions Normal Wind Conditions
130 MPH 120 MPH 110 MPH 100 MPH 90 MPH 80 MPH
Catalog No. EPA ft 2 Max Weight (lbs) EPA ft 2 Max Weight (lbs) EPA ft 2 Max Weight (lbs) EPA ft 2 EPA ft 2 EPA ft 2
SSS-12-4-11 7.4 185 9.2 230 11.3 283 14.8 18.8 24.4
SSS-14-4-11 5.5 138 7.0 175 8.8 220 11.7 15.1 19.9
SSS-15-4-11 3.8 95 5.0 125 6.7 168 8.9 11.8 15.9
SSS-18-4-11 2.3 58 3.5 88 4.8 120 6.7 9.2 12.6
SSS-20-4-11 - - 1.9 48 3.3 83 4.5 6.7 9.6
SRS-14-4 - - - - - - 7.6 9.4 12.2
SRS-16-4 - - - - - - 5.9 7.4 9.6
SRS-20-4 - - - - - - 3.5 4.4 6.0
SSA4-HB-12 - - - - - - 6.3 8.5 11.5
SSA4-HB-15 - - - - - - 2.8 4.2 6.2
SSA4-HB-16 - - - - - - 2.1 3.4 5.3
SSA4-HB-18 - - - - - - 3.3 5 7.4
RA4-HB-15 - - - - - - 1.2 1.9 3.1
RA5-HB-15 - - - - - - 3.6 4.7 6.2
RA5-HB-18 - - - - - - 4.9 6.2 8.2
RA5-HB-20 - - - - - - 3.7 4.8 6.4
TRA-CB-12M - - - - - - 8 10.2 13.4
TRA-CB-14M - - - - - - 6 7.8 10.5
TRA-CB-16M - - - - - - 7.5 9.8 12.9
TRA-CB-20M - - - - - - 3.2 4.6 6.6
* Warning: Additional wind loading, in terms of EPA, from banners, cameras, floodlights and
other accessories attached to the pole, must be added to the luminaire(s) EPA before
selecting the pole with the appropriate wind load capability.
† Factory supplied template must be used when setting anchor bolts. Gardco will not
honor any claim for incorrect anchorage placement resulting from failure to use
factory supplied templates.
Off-grid luminaire
Compatible Gardco poles
EPA Ratings
example: SSS-12-4-11-T2X6-SSDGY
Prefix
SSS
Height Pole Size
4
Gauge
11
Drilling
T2X6
Finish
SSDGY
SSS Straight Square Steel 12 12 ft
14 14 ft
15 15 ft
18 18 ft
20 20 ft
4 4 inch 11 11 gauge T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
SRS
Height Pole Size
4
Drilling
T2X6
Finish
SSDGY
SRS Straight Round Steel 14 14 ft
16 16 ft
20 20 ft
4 4 inch T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
TRA-CB
Height Wind Factor
M
Drilling
T2X6
Finish
SSDGY
TRA-CB Tapered Round
Aluminum w/ Cast Base 12 12 ft
14 14 ft
16 16 ft
20 20 ft
M Medium T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix
SSA4-HB
Height Drilling
T2X6
Finish
SSDGY
SSA4-HB Straight Square Aluminum 4" w/ Hinged Base 12 12 ft
15 15 ft
16 16 ft
18 18 ft
T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
Prefix Height Drilling
T2X6
Finish
SSDGY
RA4-HB Straight Round Aluminum, Side Arm Mount,
4" w/ Hinged Base 15 15 ft T2X6 2-3/8" OD x 6"
Long Tenon
SSDGY SolarForm Dark Grey
RA5-HB Straight Round Aluminum, Side Arm Mount,
5" w/ Hinged Base 15 15 ft
18 18 ft
20 20 ft
Maximum Luminaire Loading * †
High Wind Conditions Normal Wind Conditions
130 MPH 120 MPH 110 MPH 100 MPH 90 MPH 80 MPH
Catalog No. EPA ft 2 Max Weight (lbs) EPA ft 2 Max Weight (lbs) EPA ft 2 Max Weight (lbs) EPA ft 2 EPA ft 2 EPA ft 2
SSS-12-4-11 7.4 185 9.2 230 11.3 283 14.8 18.8 24.4
SSS-14-4-11 5.5 138 7.0 175 8.8 220 11.7 15.1 19.9
SSS-15-4-11 3.8 95 5.0 125 6.7 168 8.9 11.8 15.9
SSS-18-4-11 2.3 58 3.5 88 4.8 120 6.7 9.2 12.6
SSS-20-4-11 - - 1.9 48 3.3 83 4.5 6.7 9.6
SRS-14-4 - - - - - - 7.6 9.4 12.2
SRS-16-4 - - - - - - 5.9 7.4 9.6
SRS-20-4 - - - - - - 3.5 4.4 6.0
SSA4-HB-12 - - - - - - 6.3 8.5 11.5
SSA4-HB-15 - - - - - - 2.8 4.2 6.2
SSA4-HB-16 - - - - - - 2.1 3.4 5.3
SSA4-HB-18 - - - - - - 3.3 5 7.4
RA4-HB-15 - - - - - - 1.2 1.9 3.1
RA5-HB-15 - - - - - - 3.6 4.7 6.2
RA5-HB-18 - - - - - - 4.9 6.2 8.2
RA5-HB-20 - - - - - - 3.7 4.8 6.4
TRA-CB-12M - - - - - - 8 10.2 13.4
TRA-CB-14M - - - - - - 6 7.8 10.5
TRA-CB-16M - - - - - - 7.5 9.8 12.9
TRA-CB-20M - - - - - - 3.2 4.6 6.6
* Warning: Additional wind loading, in terms of EPA, from banners, cameras, floodlights and
other accessories attached to the pole, must be added to the luminaire(s) EPA before
selecting the pole with the appropriate wind load capability.
† Factory supplied template must be used when setting anchor bolts. Gardco will not
honor any claim for incorrect anchorage placement resulting from failure to use
factory supplied templates.
5
6
advertisement
Key Features
- Off-Grid Operation
- LiFePO4 Battery
- MPPT Charge Controller
- Dimming Profiles
- Motion Sensor
- Adjustable Tilt
- IP65 Rating
- Long Tenon Mount
Related manuals
Frequently Answers and Questions
What are the available lumen outputs for the BRP710?
The BRP710 is available in 2000, 3000, and 4500 lumen options.
How long will the BRP710 run on a single charge?
The BRP710 can run for up to two days, but the actual autonomy may vary depending on location and usage.
What type of battery does the BRP710 use?
The BRP710 uses a long-life Lithium Iron Phosphate (LiFePO4) battery.
What is the IP rating of the BRP710?
The BRP710 is rated IP65, making it resistant to dust and water.
advertisement