Nussbaum SPRINTER MOBIL 3000 Operating Instruction And Documentation
Nussbaum SPRINTER MOBIL 3000 is a safe and reliable automotive lift designed for professional use. The high quality and superior concept ensure longevity and economical business solution. It is suitable for lifting a variety of vehicles, making it a versatile tool for any garage or workshop.
advertisement
Retailer address / phone
Sprinter Mobil 3000Automotive lift date: 07/2008
Manual date: 07.07.2008
Operating Instruction and Documentation
Serial number:...........................................
Otto Nußbaum GmbH & Co.KG//Korker Strasse 24//D-77694 Kehl-Bodersweier
Tel: +49(0)7853/8990 Fax: +49(0)7853/8787
E-mail: [email protected]//http://www.nussbaum-lifts.de
Sprinter Mobil 3000Automotive lift date: 07/2008
Manual date: 07.07.2008
Operating Instruction and Documentation
Serial number:...........................................
Otto Nußbaum GmbH & Co.KG//Korker Strasse 24//D-77694 Kehl-Bodersweier
Tel: +49(0)7853/8990 Fax: +49(0)7853/8787
E-mail: [email protected]//http://www.nussbaum-lifts.de
Operating Instruction and Documentation
Sprinter Mobil 3000
- 2 -
Contents
Foreword ................................................................................................................. 3
Record of installation ............................................................................................... 5
Record of handing over ........................................................................................... 6
1.Introduction.............................................................................................................. 7
1.1 Installation and check of the automotive lift ....................................................... 7
1.2 Information of Warning ...................................................................................... 7
2.Master document of the automotive lift .................................................................... 8
2.1 Lift–manufacturer............................................................................................... 8
2.2 Application ......................................................................................................... 8
2.3 Changes at the construction .............................................................................. 8
2.4 Displacement of the automotive-lift.................................................................... 8
2.5 Declaration of conformity ................................................................................... 9
2.6 Drive on directions ........................................................................................... 10
3.Technical Information ............................................................................................ 13
3.1 Technical ratings ............................................................................................. 13
3.2 Data sheet ....................................................................................................... 14
3.3 Hydraulic diagram drawing .............................................................................. 15
3.4 Electric diagram ............................................................................................... 16
4. Safety regulations................................................................................................. 21
5. Operating instructions........................................................................................... 22
5.1 Lifting the vehicle ............................................................................................. 22
5.2 Lowering the vehicle ........................................................................................ 23
5.3 Change the installation place........................................................................... 23
6.Troubleshooting..................................................................................................... 23
7.Inspection and Maintenance.................................................................................. 25
7.1 Maintenance plan of the lift.............................................................................. 25
7.2 How often must the lift be cleaned?................................................................ 26
8. Security check ...................................................................................................... 27
9.Installation ............................................................................................................. 27
9.1 Regulations...................................................................................................... 27
9.2 Initiation ........................................................................................................... 28
9.3 Change the installation place........................................................................... 28
First security check before installation ................................................................... 31
Regular security check and Maintenance .............................................................. 32
Extraordinary security check.................................................................................. 40
Sprinter Mobil 3000
- 2 -
Contents
Foreword ................................................................................................................. 3
Record of installation ............................................................................................... 5
Record of handing over ........................................................................................... 6
1.Introduction.............................................................................................................. 7
1.1 Installation and check of the automotive lift ....................................................... 7
1.2 Information of Warning ...................................................................................... 7
2.Master document of the automotive lift .................................................................... 8
2.1 Lift–manufacturer............................................................................................... 8
2.2 Application ......................................................................................................... 8
2.3 Changes at the construction .............................................................................. 8
2.4 Displacement of the automotive-lift.................................................................... 8
2.5 Declaration of conformity ................................................................................... 9
2.6 Drive on directions ........................................................................................... 10
3.Technical Information ............................................................................................ 13
3.1 Technical ratings ............................................................................................. 13
3.2 Data sheet ....................................................................................................... 14
3.3 Hydraulic diagram drawing .............................................................................. 15
3.4 Electric diagram ............................................................................................... 16
4. Safety regulations................................................................................................. 21
5. Operating instructions........................................................................................... 22
5.1 Lifting the vehicle ............................................................................................. 22
5.2 Lowering the vehicle ........................................................................................ 23
5.3 Change the installation place........................................................................... 23
6.Troubleshooting..................................................................................................... 23
7.Inspection and Maintenance.................................................................................. 25
7.1 Maintenance plan of the lift.............................................................................. 25
7.2 How often must the lift be cleaned?................................................................ 26
8. Security check ...................................................................................................... 27
9.Installation ............................................................................................................. 27
9.1 Regulations...................................................................................................... 27
9.2 Initiation ........................................................................................................... 28
9.3 Change the installation place........................................................................... 28
First security check before installation ................................................................... 31
Regular security check and Maintenance .............................................................. 32
Extraordinary security check.................................................................................. 40
Operating Instruction and Documentation
Sprinter Mobil 3000
- 3 -
Foreword
Nußbaum lifting systems are the result of a long time experience in the automotive lifting industry.
The high quality and the superior concept ensure reliability, a long lift lifetime and above all and
economic business solution.
To avoid unnecessary damage, injury or even death, read the operating instructions with care and
observe the contents.
Nußbaum lifts is not responsible for incidents involving the use of Nußbaum lifting systems for
applications other than those for which they were designed.
Otto Nußbaum GmbH & Co.KG is not liable for any resulting damages. The user carries the
risk alone.
Obligations of the user:
- To observe and adhere to the operating instructions.
- To follow the recommended inspection and maintenance procedures and carry out the
prescribed tests.
- The operating instructions must be observed by all persons working with or around the lift.
- Above all chapter 4 “Safety Regulations“ is very important and must be closely adhered to.
- In addition to the safety regulations stated in the operating instructions manual, the
appropriate safety regulations and the operating procedures of the place of operation must also
be considered.
Obligations of the operator:
The operator is obliged to allow only those persons complying to the following requirements to work
with or around the unit.
- Persons being familiar with the basic regulations concerning labour safety and accident
prevention and being trained to operate the particular unit.
- Persons having read and understood the chapter concerning safety and warning symbols.
- Persons using the lift are required to confirm that they have read and understood the chapter on
safety and warning symbols by signing the appropriate form.
Dangers when operating the lift:
Nußbaum-Lifts are designed and built according to technical standards and the approved
regulations for technical safety. The use of Nußbaum lifts for purposes other than those for which they
were designed, may result in injury or even death.
The lift must only be operated :
- For its appropriate use
- In faultless condition concerning technical security.
Organisational Requirements:
- The instructions for use, are to be kept at the place of operation being easily access able
at any time.
- In addition to the instructions for use, rules pertaining to other regulations i.e. accident
prevention and environmental rules are to be observed and adhered to.
Sprinter Mobil 3000
- 3 -
Foreword
Nußbaum lifting systems are the result of a long time experience in the automotive lifting industry.
The high quality and the superior concept ensure reliability, a long lift lifetime and above all and
economic business solution.
To avoid unnecessary damage, injury or even death, read the operating instructions with care and
observe the contents.
Nußbaum lifts is not responsible for incidents involving the use of Nußbaum lifting systems for
applications other than those for which they were designed.
Otto Nußbaum GmbH & Co.KG is not liable for any resulting damages. The user carries the
risk alone.
Obligations of the user:
- To observe and adhere to the operating instructions.
- To follow the recommended inspection and maintenance procedures and carry out the
prescribed tests.
- The operating instructions must be observed by all persons working with or around the lift.
- Above all chapter 4 “Safety Regulations“ is very important and must be closely adhered to.
- In addition to the safety regulations stated in the operating instructions manual, the
appropriate safety regulations and the operating procedures of the place of operation must also
be considered.
Obligations of the operator:
The operator is obliged to allow only those persons complying to the following requirements to work
with or around the unit.
- Persons being familiar with the basic regulations concerning labour safety and accident
prevention and being trained to operate the particular unit.
- Persons having read and understood the chapter concerning safety and warning symbols.
- Persons using the lift are required to confirm that they have read and understood the chapter on
safety and warning symbols by signing the appropriate form.
Dangers when operating the lift:
Nußbaum-Lifts are designed and built according to technical standards and the approved
regulations for technical safety. The use of Nußbaum lifts for purposes other than those for which they
were designed, may result in injury or even death.
The lift must only be operated :
- For its appropriate use
- In faultless condition concerning technical security.
Organisational Requirements:
- The instructions for use, are to be kept at the place of operation being easily access able
at any time.
- In addition to the instructions for use, rules pertaining to other regulations i.e. accident
prevention and environmental rules are to be observed and adhered to.
Operating Instruction and Documentation
Sprinter Mobil 3000
- 4 -
- The owner of the Nußbaum lifting system must ensure that operators and persons working with
or around the lift occasionally conduct “refresher” courses to ensure that the appropriate
operating procedures and safety precautions are known.
- Personal Protective Equipment (PPE) must be used according to the appropriate regulations.
- All safety- and danger signs on and around the lift are to be observed and followed!
- Spare parts must comply with the technical requirements specified by the manufacturer.
This is only warranted with original parts.
- Observe and adhere to the specified time intervals between tests and inspections.
Maintenance works, repairing faults
- Adjustments, maintenance, and inspections, are to be followed according to the time intervals
specified. Details regarding the exchange of parts and components as mentioned in the
operating instructions are to be adhered to.
These works must only be carried out by expert personal.
- After maintenance- and repair works loose screws, nuts and bolts must always be firmly
tightened!
Guarantee and liability
- Our “General conditions of selling and delivering” are in force.
There will be no guarantee or liability for incidents involving injuries or death or damage to
equipment if these incidents are the result of one or more of the following reasons.
- Inappropriate use of the lift
- Inappropriate installation, initiation, operation and maintenance of the lift.
- Use of the lift while one or several security devices do not work, do not work correctly or are not
installed correctly.
- Failure to follow the regulations of the operating instructions regarding transport, storage,
installation, initiation, operation and maintenance of the lift.
- Unauthorized changes to the structure of the lift without first asking the producer.
- Unauthorized changes of adjustments of important components of the lift (e.g. driving elements,
power rating, motor speed, etc)
- Wrong or incorrect maintenance practice.
- Catastrophes, acts of God or external reasons.
Initiation
The Sprinter Mobil was checked by Nußbaum Company. Before the first
initiation the test must not additional take through by an expert.
Sprinter Mobil 3000
- 4 -
- The owner of the Nußbaum lifting system must ensure that operators and persons working with
or around the lift occasionally conduct “refresher” courses to ensure that the appropriate
operating procedures and safety precautions are known.
- Personal Protective Equipment (PPE) must be used according to the appropriate regulations.
- All safety- and danger signs on and around the lift are to be observed and followed!
- Spare parts must comply with the technical requirements specified by the manufacturer.
This is only warranted with original parts.
- Observe and adhere to the specified time intervals between tests and inspections.
Maintenance works, repairing faults
- Adjustments, maintenance, and inspections, are to be followed according to the time intervals
specified. Details regarding the exchange of parts and components as mentioned in the
operating instructions are to be adhered to.
These works must only be carried out by expert personal.
- After maintenance- and repair works loose screws, nuts and bolts must always be firmly
tightened!
Guarantee and liability
- Our “General conditions of selling and delivering” are in force.
There will be no guarantee or liability for incidents involving injuries or death or damage to
equipment if these incidents are the result of one or more of the following reasons.
- Inappropriate use of the lift
- Inappropriate installation, initiation, operation and maintenance of the lift.
- Use of the lift while one or several security devices do not work, do not work correctly or are not
installed correctly.
- Failure to follow the regulations of the operating instructions regarding transport, storage,
installation, initiation, operation and maintenance of the lift.
- Unauthorized changes to the structure of the lift without first asking the producer.
- Unauthorized changes of adjustments of important components of the lift (e.g. driving elements,
power rating, motor speed, etc)
- Wrong or incorrect maintenance practice.
- Catastrophes, acts of God or external reasons.
Initiation
The Sprinter Mobil was checked by Nußbaum Company. Before the first
initiation the test must not additional take through by an expert.
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
advertisement
Key Features
- High lifting capacity of 3000 kg
- Lifting height of 1,850 mm
- Compact design for space-saving
- Electro-hydraulic drive for smooth and precise operation
- Single-point safety release system for added safety
- Optional accessories such as wheel-free play detectors and measuring systems for enhanced functionality
Related manuals
Frequently Answers and Questions
What is the maximum lifting capacity of the Nussbaum SPRINTER MOBIL 3000?
3000 kg
What is the lifting height of the Nussbaum SPRINTER MOBIL 3000?
1,850 mm
What type of drive system does the Nussbaum SPRINTER MOBIL 3000 use?
Electro-hydraulic
Does the Nussbaum SPRINTER MOBIL 3000 have a safety release system?
Yes, it has a single-point safety release system
Can the Nussbaum SPRINTER MOBIL 3000 be equipped with additional accessories?
Yes, it can be equipped with optional accessories such as wheel-free play detectors and measuring systems
advertisement
